Videos
Loading the player ...
  • Offer Profile
  • The Assfalg GmbH is a medium sized company, founded in 1932, in 4th Generation. Nationally and internationally, we support the metalworking industry. We offer solutions: as well as deburring or edge bevelling.

    Assfalg has two established segments and continues to expand:

    1. Magnet Technology and
    2. Deburring

    Our aim is to secure quality at the highest level of competitiveness by solid engineering - for our customers.

    Visit us on:

Product Portfolio
  • Assfalg Portfolio

      • News

          • Breaking edges precisely with Assfalg SPEEDY!

          • By overtaking SWISS SPEEDY in 2018 Assfalg has increased its product-portfolio for deburring machines.

            The strength of the Speedy Deburring Machines is the proccessing of internal and external edges of flat workpieces.

            The Speedy Contour deburrs equally square and round workpieces. The Speedy Prism deburrs straight edges. These compact and handy table machines enable a rational and precise processing for all materials. The table machines are ideally used for processing milled or turned workpieces and laser-cutted pieces with a smooth surface. Easy machining of parts with just one setup, without reclamping. The smoother the surface, more precise the roller bearing can work hence it produces clean chamfers. Precision workpieces with a smooth defined locating face create superb results for the worker. Optical the workpieces turn into a high end product after chamfering and rounding edges.

            All types of SPEEDY are manufactured at Assfalgs´ in Schwäbisch Gmünd/Germany.

            read more...

            We are looking forward to your visit in HALL 11 / F20 !
            Your Assfalg -Team
          • They are the new GIANTS in the world of magnetic lifting

          • Just in time for the EMO, Assfalg presents a breakthrough, an Electropermanent Battery Lifting Magnet, which is filled with surprises. The SB-serie of our EPM lifting magnets, SB 200 / SB500 / SB950, is already a high-tech product in the magnet lifting world, but the most innovative lifter is the SB 950S.

            The SB950S

            Why is this lifter filled with surprises?

            Trust is GOOD to have the CONTROL is better!

            • It detects flat and cylindric loads and displays the load type.
            • Depending on the load type and the magnetic characters of the workpiece (material, thickness, surface condition, airgap) the acceptable lifting force will be shown in GREEN. The SB 950S calculates the actual magnet force based on the parameters above.
            • Is the triple safety factor fallen below, no magnetization comes up. A RED light is shown supported by a permanent alert.

            read more...

            We are looking forward to your visit in HALL 11 / F20 !
            Your Assfalg -Team

          • The stone vibration deburring and slide grinding machine TV 95-SL

          • The Assfalg company expands its production and shows the stone vibration deburring and slide grinding machine TV 95-SL at EMO 2019.

            The machine deburrs and rounds edges lightly from smaller workpieces made of alu, non-ferrous metal, steel, stainless steel and plastics. The TV 95-SL is a compromise between huge industrial finishing machines and slide grinding systems for small series. The trough volume has a capacity of 95l. There is a timer and the intensity is adjustable. Furthermore a noise protection cover enables a low-noise working.

            Assfalg has built up its first demonstration centre in Schwäbisch Gmünd. The customers can test their unprocessed workpieces, also possible in bigger processing facilities like the rotary vibrators from Assfalg (which are available at site), with different compounds.

            read more...

            We are looking forward to your visit in HALL 11 / F20 !
            Your Assfalg -Team

        • LIFTING MAGNETS

        • Hand-operated or electropermanent lifting magnets lift and transport flat or round workpieces. Size and characteristics of the load – thin or thick – will not be any problem for you.
          • flat or round workpieces
          • up to 15.000 kg
          • compact and sturdy
            • LIFTING MAGNETS ELECTRICAL

                • SB200 | SB500 | SB950 - ELECTROPERMANENT BATTERY LIFTER

                • The electropermanent battery lifter SB200 | SB500 | SB950 is a top product from ASSFALG in the load range of 200kg | 500 kg | 950 kg for flat material and 50kg | 200 kg | 400 kg for round material.

                  It combines the advantages of both permanent lifters and electropermanent lifters. Using a current pulse of less than one second the electropermanent battery lifter SB200 | SB500 | SB950 from ASSFALG may be switched manually using pushbuttons or automatically. Although during transport of the load no current flows, the workpiece remains safely clamped like a permanent magnet. Up to 1000 ON/OFF switching cycles are possible before recharging the internal battery using the supplied mains charger.

                  ADVANTAGES

                  • Small, handy and robust
                  • Selectable between switching manually or with a radio remote control
                  • Independant of main power supply
                  • A built in security mechanism prevents switching when the load is suspended
                  • Up to 1000 ON/OFF switching cycles are possible
                  • Akku battery (lithium-ion battery) is charged in approx. 2h using a mains charger
                  • Consume less energy
                • EPM-B - ELECTROPERMANENT BATTERY LIFTING MAGNET

                • In the development of magnetic lifters the Electropermanent Battery Lifting Magnet EPM-B from ASSFALG represents the top of the magnetic lifting technology. They combine the advantages of the Permanent Lifting Magnets and the Electro Lifting Magnets.

                  Electric impulses can switch the Electropermanent Battery Lifting Magnets within seconds. This can be done automatically or manually by pressing a button. While transporting the load no electrical power flows and yet the workpieces is clamped as safe as with a permanent lifting magnet.

                  The electropermenent battery magnetic lifter EPM-B can be used both in individual operation and several magnetic lifters on traveres. Therefore the EPM-B magnetic lifters show an interesting alternative for the 3-shift operation. By the inching function the EPM-B magnetic lifter can separately lift already 4 mm thick sheets from a heap.

                  ADVANTAGES

                  • It can be selected between manual button operation or automatic operation
                  • Max. operation temperature 80°C
                  • Optical and acoustic alarm device with battery charge level indicator
                  • Magnet is connected to the power supply tocharge the accumulators, recharge time approx.
                  • 8h, operation time approx. 300 operation cycles
                    Replaceable, durable gel battery accumulators
                • EPM M - ELECTROPERMANENT LIFTING MAGNET

                • This EPM M magnets are used for frequent handling of workpieces when mains supply is available. The switching time is rather short.

                  ADVANTAGES

                  • Very short switching cycles
                  • No drop of workpiece when power supply fails
                  • Mainly maintenance free
                  • Reduction of power for destacking from 6mm sheet thickness
                • EPM H - ELECTROPERMANENT LIFTING MAGNET

                • This EPM H is for lifting and transporting heavy ferrite blocks or slaps, even with rough surface. The square pole technology guarantees a bigger force concentration in the workpiece and bridges airgaps.

                  ADVANTAGES

                  • Bridges big airgaps
                  • The casing is sturdy and equipped with alarm lamp and sound
                  • No drop of workpiece, when power supply fails
              • PERMANENT LIFTING MAGNETS

                  • ELIFT - PERMANENT LIFTING MAGNET

                  • The Elifts are hand-operated Permanent Lifting Magnets. They are universally applicable and economically very attractive.

                    ADVANTAGES

                    • Two-hand operation via hand lever and safety locking
                    • Max. operation temperature 80°C
                    • Use of durable and extremely strong Neodym magnet materials
                    • Compact, sturdy construction, low dead weight
                    • No maintenance
                    • No springing back of the switch lever
                  • SH 12 - MAGNETIC HAND TRANSPORTER

                  • Assfalg lifts and clamps with safety. Best examples therefore are the proven magnetic transporters of the type SH 12.

                    Through decades of experience and development these little helpers embody the high-end of handheld magnetic transporters.

                    ADVANTAGES

                    • Mechanical loosening by pushing hand levers
                    • Max. operation temperature 80°C
                    • Very flat magnetic field, developed especially for sheets
                    • Separates sheets in the stack from 2 mm thickness
                  • HL 60-CE - HANDHELD MAGNETIC TRANSPORTER

                  • The Magnet Transporter HL 60-CE magnetizes and demagnetizes at the push of a button. It holds like a permanent magnet. You can move greasy, sharp-edged workpieces or hot flame-cut parts with it. The HL 60-CE -L is with long handle.

                    ADVANTAGES

                    • Electric clamping and loosening at the push of a button
                    • Max. operation temperature 80°C
                    • Keeps being absolutely clean after switching-off - no dirt, no particles or chips are sticking!
                    • Up to 1,000 switches are possible with only one battery charge
                  • SH 35-K - CRANEGUIDED MAGNETIC TRANSPORTER

                  • Since decades crane transporters of the SH series have been considered to be an economic solution for horizontal or vertical transport by crane. Contrary to other permanent magnet lifters the SH types have a flatter magnetic field especially designed for picking up sheets with 3mm thickness and more. They are real alternative to mechanical transport clamps, even for support during sheet bending process.

                    ADVANTAGES

                    • Mechanical release by handle
                    • Max. operation temperature 80°C
                    • Workpieces can be swivelled by 90° (horizontally-vertically)
                • TRAVERSES

                      • LOAD LIFTING BEAMS WITH PATENTED FULL STEEL EPMAGNET MODULES

                      • EPMagnet modules are the magnetic power parts of a EPM Lifting System for lifting sheets or tubes. Only short current pulses magnetize or demagnetize the system - that means that no energy is needed during transporting stage and that energy consumption for switching is very low in comparison to Electromagnet Systems. Therefore no backup system is needed. Once the electropermanent magnetic power is activated, it holds like a permanent magnet. It is independent of current flow.

                        ADVANTAGES

                        • Individual assembly of EPMagnet Modules and Traverses
                        • The uplift happens by 70% of magnetpower and is increased to 100% within 10 seconds. During this time the inching function allows destacking
                        • The processing is indicated by optical and accustical alarm
                        • An additional safety machanism prevents the operator from accidential switching during transporting stage
                        • Choice of manual button operation or automatic operation with remote control
                        • Maintenance-free
                  • AUTOMATION

                      • MAP-MRP SERIES - MAGNETS FOR THE AUTOMATION AND ROBOTIC

                      • These Magnets cover very individual needs and can be fitted for nearly all surfaces. They get switched within very short cycle time by pneumatic or electric impulse.

                        • Workpieces with flat and round or irregular shape can be attracted.
                        • Very thin sheets from thickness more than 0,5 mm can be separated from stock.
                        • Workpieces with light or heavy load can be moved.

                        ADVANTAGES

                        • Absolutely safe lifting – namely with 3-fold safety (the pull-off strength is 3 times there commended lifting force)
                        • Extremely low residual magnetism
                        • Can be installed in any orientation
                        • Can be used with a large range of material thicknesses
                        • Very thin sheets from thickness more than 0,5 mm can be separated from stock
                        • Workpieces with light or heavy load can be moved
                        • Longlived construction
                        • Maintenance-free
                        • Highest safet
                        • Compressed air demand 5 - 8 bar
                        • IP Code 67
                      • AR-SERIES - MAGNETS FOR THE AUTOMATION AND ROBOTIC

                      • These Magnets are well controlled by air pressure. The rectangular housing is designed for an easy exchange of pole shoes. Special pole shoes are needed for irregular, uneven workpiece forms. The magnets are very flexible because one of 3 possible magnet areas can be used. This magnet is best choice when no flat area exists.

                        • Workpieces with flat and round or irregular shape can be attracted.
                        • Very thin sheets from thickness more than 0,5 mm can be separated from stock.
                        • Workpieces with light or heavy load can be moved.

                        ADVANTAGES

                        • Each AR device is equipped with a set of flat or tube/round pole shoes
                        • Very low residual magnetism
                        • The exchangeable pole shoes can be adapted individually to the workpiece
                        • Universal in application
                        • Very light and very heavy workpieces can be grabbed
                      • AY-SERIES - MAGNETS FOR THE AUTOMATION AND ROBOTIC

                      • A highly technical tool series that allows maximum saturation (performance) on thin material. Array units ("AY") offer increased power in a compact, single actuator package. These units are suited to sheet handling on the fly or in shear. This is a revolutionary automation tool that for the first time, truly challenges vacuum suction systems while delivering fast payback on the initial investment. Units can be specified for deep field (JSC) or shallow field (ASC) operation. They get switched within very short cycle time by pneumatic or electric impulse.

                        • Workpieces with flat and round or irregular shape can be attracted.
                        • Very thin sheets from thickness more than 0,5 mm can be separated from stock.
                        • Workpieces with light or heavy load can be moved.

                        ADVANTAGES

                        • Very thin sheets up to 0,5mm can be separated from the stack
                        • Very low residual magnetism
                        • Absolutely safe lifting - namely with 4-times safety (the pull-off strength is 4-times of the recommended lifting force)
                        • Very light and very heavy workpieces can be grabbed
                        • Compact and stable
                      • LAY-SERIES - MAGNETS FOR THE AUTOMATION AND ROBOTIC

                      • The "LAY" signifies Linear Array: designed for applications where stabiity and power are important. Ideal for long cylinders, tubing and rough surface finishes, the multiple magnetic fields in LAY units ensure strong holding forces also on thin material. Each unit comes with replaceable pole shoes for improved on-site serviceability. They get switched within very short cycle time by pneumatic or electric impulse.

                        • Workpieces with flat and round or irregular shape can be attracted.
                        • Very thin sheets from thickness more than 0,5 mm can be separated from stock.
                        • Workpieces with light or heavy load can be moved.

                        ADVANTAGES

                        • Exchangeable pole shoes can be used universally
                        • Very strong adhesive forces on rough surfaces (air gap)
                        • Very low residual magnetism
                        • Quick switching by pressured air 6-8 bar
                    • CLAMPING MAGNETS

                    • Maximum adhesive force for safe processing  with unimagined production reserves:
                      • a 5-sided machining in one clamp
                      • minimum set-up times and increase of productivity
                      • increase of tool useful life and process safety
                        • MAGNETIC CHUCKS / ROUND MAGNETIC CHUCKS

                            • MAGNASLOT - MAGNETIC CHUCK

                            • The patented (EPM) electropermanent quadratic pole plate ***Patent-Nr. EP1874504*** is the perfect solution to clamp ferromagnetic materials reliably and energy-efficient on machine tools.

                              The patent applies the "full steel surface" of this EPM magnetic chuck. Compared to conventional chucks with epoxy resin, our magnetic clamping chucks with a solid steel surface are more resistant against hot chips, coolants and other processing conditions. Through the use of pole extensions unevenness of the workpiece can be balanced and the deformation of the workpiece can be prevented.

                              ADVANTAGES

                              • All-around 5–side machining and distortion free clamping is possible in one clamp by means of pole extensions -> With given pole number the chuck can be covered with 3 x fixed and multiple mobile pole extensions for rough machining. If already machined side is clamped, then only fixed pole extensions may be advantageous
                              • Set-up time is reduced to a minimum, hence an increase of productivity
                              • Less vibrations for longer tool life and better process accuracy
                              • Patented solid top resists best to hot chips and coolance and cares also for heat dissipation
                            • DOUBLEMAG/TRIPLEMAG - MAGNETIC CLAMPING ELEMENTS

                            • These magnetic modules are adhesive on both sides and both clamp the workpiece and themselves to the machine table. Mechanical clamping or fix clamping is not required. Several modules combined, are a cost-effective alternative to big magnetic chucks.

                              The both sided EPM modules from ASSFALG offer a low cost alternative to large EPM chuck systems. These magnetic clamping elements can be used in a single version or in the composite of severals. Modules can be positioned very fast and easily in any configuration and they can accommodate to different workpieces sizes.

                              ADVANTAGES

                              • Drastic reduction of set-up times
                              • 5-side machining with simple and fast positioning and clamping
                              • Less stress, less vibrations, less torsions for better machining
                              • Flexible combination of multiple magnets to machine large or bulky workpieces
                              • Better accuracy-plane-parallelism 0,01/1000mm is reachable
                              • The advantage of fixed and mobile pole extensions for balancing uneven, bent, large workpieces
                            • MAGNASLOT T - MAGNETIC CHUCK

                            • The patented (EPM) electropermanant magnetic chuck with T-Slots ***Patent-Nr. EP1874504*** with a full steel surface combined the advantages of the magnetic and mechanical clamping in one chuck. It is the perfect solution in clamping ferromagnetic and non ferromagnetic workpieces on machine tools reliably and energy efficient.

                              By using of pole extensions unevenness in the workpiece is being compensated and a distortion of the workpiece will be prevented.

                              The patent applies the "full steel surface" of this EPM magnetic chuck. Compared to conventional chucks with epoxy resin, our magnetic clamping chucks with a solid steel surface are more resistant against hot chips, coolants and other processing conditions.

                              ADVANTAGES

                              • All-around 5–sided machining is possible in one clamp
                              • For clamping of small and big workpieces by milling processes and rough and fine precision machining
                              • Clamping of magnetic and nonmagnetic workpieces
                              • A combination of multiple EPM chucks enables large workpiece machining
                                 
                            • EPMRADIAL - ROUND MAGNETIC CHUCK

                            • These Electropermanent Magnetic Chucks are ideal for clamping distortionfree big discs, rings or bearings for windmills. Even hardened rings can be finished best. Centric holes or through holes can be drilled.
                              All the advantages of fixed and mobile pole extensions of Magnaslot can be used, to reach best surface quality.

                              ADVANTAGES

                              • Extremely short set-up times due to simple and fast clamping of workpieces
                              • 5-side processing, as only one workpiece side is required for magnetic clamping
                              • Distortion-free holding of raw part or uneven workpiece, because positive-locking clamping by means of fixed and mobile pole extension becomes possible (underlining of workpieces is not necessary any more!)
                              • No damages to the magnetic chuck in case of breakouts, because the workpiece can be clamped raised to pole extensions
                              • Slight adjustment of the magnetic adhesion power to thin workpieces or when aligning by means of the adhesion power regulation
                              • Extremely high, permanent, magnetic adhesion power at activation within seconds
                              • Through holes or surrounding clamping slots for fastening on machine table or device
                              • Special cable with bayonet fixing or fixed cable with slip ring carrier enable a connection of magnetic chuck and controller
                            • EPFLUX - MAGNETIC CHUCK

                            • For over 30 years, Assfalg is characterized by continuous improvements in magnetic clamping technology. The EPFlux magnetic chuck is now a unique innovation that has been reached through a cooperation with leading machine manufacturers.

                              The electropermanent magnetic chuck EPFlux is the appropriate chuck for precision grinding machines. The EPFlux magnetic clamping plate shows no remanence (residual magnetism) when deactivating.

                              High-alloyed and hardened workpieces can be easily detached from the magnetic chuck. Highest grinding accuracy is achieved because no heating of the plate takes place.

                              ADVANTAGES

                              • Clamping force approx. 100 N/cm²
                              • Pole pitch 5 + 1,5 mm
                              • Incorporating cable outlet
                              • For Controller EPM D50-100 with additional Flux-IC
                                 
                            • MICROFINE - PERMANENT MAGNETIC CHUCK

                            • The permanent magnetic chuck MICROFINE from Assfalg is especially suited to clamp small and thin workpieces for eroding and grinding works.

                              The MICROFINE is equipped with an extremely high adhesive force with a flat magnetic field. It has a low design height and is mechanically switchable.

                              ADVANTAGES

                              • Design with low height, but high adhesive force
                              • The contact surface can be machined up to 2mm and drilled up to max. 8 mm depth
                              • Liquid-tight
                              • Can be switched ON/OFF mechanically
                              • Workpieces can be clamped stress-free and fast
                              • 5-side processing, as only one side is magnetically clamped
                              • Low magnetic penetration depth because of a flat magnetic field due to fine pole pitch – not very good for bridging air gaps
                              • Adhesive force: 80 N/cm2 with pole pitch 1.5 + 0.5 mm
                            • MICROSINE - PERMANENT MAGNETIC CHUCK SINETABLE

                            • The permanent magnetic chuck SINETABLE Microsine from Assfalg is especially suited to clamp small and thin work-pieces for eroding and grinding tasks.

                              The Sinetable Microsine is equipped with an extremely high adhesive force with a flat magnetic field. It has a low design height and is mechanically switchable.

                              ADVANTAGES

                              • Liquid-tight
                              • The standard Microsine is equipped with Microfine Magnetic Chuck
                              • The magnetic field is flat and the flux penetration in the workpiece is little
                              • The Microfine surface can be machined down by 2mm and partially drilled up to 8mm
                              • Workpieces can be fastly clamped with wanted inclination, stress-free
                              • Tilting angle is precisely set by sinustable and gauge blocks
                              • 5-side machining as only one side is clamped magnetically
                              • Adhesive force: 80 N/cm2 with pole pitch 1.5 + 0.5 mm
                              • Swifel range 0 – 45° (on request 0 - 60°)
                              • Surface hardened
                            • PERMAMAX - PERMANENT MAGNETIC CHUCK

                            • The permanent magnetic chuck Permamax of Assfalg is an extremely strong clamping plate for milling. It is universally applicable, especially for milling, from part size 30x15x6mm and larger workpieces.

                              Thin ferromagnetic workpieces from a thickness of 0.8 mm and thickness of workpieces can be machined. The workpieces can be clamped stress-free and fast.

                              ADVANTAGES

                              • Liquid tight
                              • Surface can be machined down by 2mm and partially drilled up to 8mm
                              • Switched ON/OFF mechanically
                              • Workpieces can be clamped stress-free and fast
                              • 5-side processing, as only one side is magnetically clamped
                              • High power and flat magnetic field (max. 10mm penetration into workpiece)
                              • Adhesive force: up to 140 N/cm2 with pole pitch 12 + 3 mm (highest power is concentrated within 20 mm from edges)
                            • PERMAMAX ROUND MAGNETIC CHUCK

                            • The round Permamax is a very strong Permanent Magnetic Chuck with parallel pole pitch.
                              It is manually switched.
                              It is universally suitable for all kind of ferromagnetic workpieces.

                              ADVANTAGES

                              • High power and liquid-tight
                              • The surface can be machined down by 2mm and partially drilled up to 8 mm depth (5 mm at D ≤ 130 mm)
                              • Mechanically switchable
                              • Workpieces can be clamped stress-free and fast
                              • All-around processing as only one side is clamped magnetically
                              • Adhesive force: up to 140 N/cm2 with pole pitch 12 + 3 mm
                            • NEOSTAR - ROUND MAGNETIC CHUCKS

                            • The permanent magnetic chuck Neostar of Assfalg is a permanent round magnet with neodymium magnet system and radial pole pitch. It is manually switched.

                              It is universally suitable for rotationally-symmetrical, ferromagnetic workpieces, especially for rings and discs from approx. 80 mm diameter. A drilled hole in the center can be made.

                              ADVANTAGES

                              • Liquid-tight
                              • Can be switched ON/OFF mechanically
                              • The center is not magnetic and can be drilled through up to the dia. “C”
                              • Workpieces can be clamped stress-free and fast
                              • All-around processing as only one side is clamped magnetically
                              • High power and flat magnetic field (penetrates max. 10mm into workpiece)
                              • Adhesive force: up to 140 N/cm2
                          • MAGNETIC WELDING ANGLES

                              • A90 - MAGNET WELDING ANGLE

                              • The magnet welding angle represents the indispensable third hand at welding and assembly works on flat and round materials at an angle of 90 °. Use additional MSQ to increase power. The MSQ can be put reverse for inside angle or slide up and down to adjust.

                                ADVANTAGES

                                • Sturdy steel construction of the angle
                                • Powerful grip can increased by additional MSQ
                                • Usable as inside and outside angle
                                • Usable for round and square workpieces
                                • Sliding up and down to adjust
                              • BOOMER - WELDING AND ASSEMBLY HELPER

                              • The Boomer represents a compact helper in welding and assembly work on flat and round material with individual angle adjustment.The angles can be set exactly due to engraved scales (0 - 360 Degree). 

                                This magnetic welding angle can be completely shut down by a simple 180 ° rotation.

                                ADVANTAGES

                                • Fast and easy angle adjustment by means of quick release
                                • Engraved scales for exact angle adjustment, 0 – 360°
                                • MSQ Magnets can be completely switched off by just turning the switch lever by 180° - stays CLEAN
                                • Sturdy steel construction of the angle
                                • Usable for round and square workpieces
                                • Magnetic power acts on all sides
                              • MAGSQUARE - MAGNETIC SQUARE

                              • Versatile workholding and fixturing magnet. The magnetic grip is powerful on the 3 long sides. A simple 180° turn of the knob to switch ON / OFF. Pretapped holes on 4 sides for mounting. Great for supporting guides and walls. MSQ is assembled in angle A90 and Boomer.

                                ADVANTAGES

                                • Magnets turns completely OFF and stays clean
                                • Usable for round and square workpieces
                                • Magnetic power is powerful on 3 sides, but acts on all sides
                                • Pretapped holes on 4 sides for quick mounting
                                • Great for making own fixtures
                              • MS/MAV/MSA - MAGNETIC WELDING ANGLES

                              • Your universal magnet clamp for small welding and assembly works. All magnetic angles are switchable and suitable for flat and round material. MAV 120 and PA 200 are stepless adjustable angles.

                                ADVANTAGES

                                • Easy positioning, adjusting and fixing of workpieces
                                • No disflection or influence of welding arc
                                • The contact areas of MS, MAV 120 and PA 200 are separately switchable
                                • The angle of MAV120 and PA200 is quickly set by scale
                              • PIVOT - MAGNETIC WELDING ANGLE

                              • The Magnetic Welding Angle Pivot represents an universal handyman for small welding or assembly works for round and flat material. Moreover, it is infinitely variable from a range from 22° - 270°, and also switchable.

                                Due to the quick release and a scale, the angle can be easily and precisely adjusted. Components can be clamped on the inside or outside. Every leg can be separately switched on- and off by a rotary switch.

                                ADVANTAGES

                                • Easy and precise angle adjustment by means of quick release and scale
                                • Each leg can be separately switched on and off by means of a rotary switch
                                • Easy positioning, adjusting and fixing of workpieces
                                • No disruption of the arc when welding
                                • Sturdy and maintenance-free
                                • Max. operation temperature 80°C
                              • SW - MAGNETIC WELDING ANGLE

                              • A classic through and through - the Magnetic Welding Angle SW of Assfalg. Available in two sizes (200 mm and 300 mm side length) the magnetic welding angle displays as an indispensable tool for welding and installation work.

                                These multiple application possibilities for welding and installation enterprises are underpinned by economic as well as safety aspects.

                                ADVANTAGES

                                • Easy positioning, adjusting and fixing of workpieces
                                • No disflection or influence of welding arc
                            • HAND-HELD MACHINES

                            • Hand-held edge milling machines for the flexible jobs from hand deburrer to the edge milling machine for weld seam preparation.
                                • PNEUMATIC- AND ELECTRIC GRINDER

                                    • AG 360 | AG 460 | GDS 009 | 101-E - PNEUMATIC GRINDER

                                    • The lightweight and handy air grinders are ideal for both the rough and the fine use. Confined spaces and every 3D-shapes can be processed using various grinding tools and rotary burrs.

                                      ADVANTAGES

                                      • Large selection of materials
                                      • Tool change within a few seconds
                                      • Lightweight
                                      • Easy handling
                                      • High capacity and durability
                                      • Different grinding tools

                                      The quick tool changes and easy handling make the air grinders to true helpers - not only at work, even within the household.

                                    • MTQ 100 MH | F3 | F6 | S3 | MT W - ELECTRIC GRINDER

                                    • The handy and powerful electric grinders are optimally suited for individual applications for deburring, cutting, grinding and polishing. Confined spaces and every 3D-shapes can be processed using various grinding tools and rotary burrs.

                                      ADVANTAGES

                                      • Very handy by lightweight, compact and balanced motor. Wrist protection by extremely balanced hand motor
                                      • Large selection of tools
                                      • Tool change within a few seconds
                                      • Sight protection glass with LED and with gooseneck magnetic base or mechanical fixture
                                      • Made in Germany
                                    • DHB 330 | DHB 520 - PNEUMATIC HAND BELT GRINDER

                                    • The pneumatic hand belt grinder machines are used for the surface-, contour- and shape cut. The grinder is very flexible, because of the 360° adjustable grinding arm. The sanding belt is easily and quickly exchanged.

                                      ADVANTAGES

                                      • Robust construction
                                      • Low weight
                                      • 360° swivelling grinding arm
                                  • CHAMFERING MACHINE, DEBURRING MACHINE, HANDHELD

                                      • ASO 750 | ASO 760-2 - CHAMFERING MACHINE, DEBURRING MACHINE

                                      • Handheld, electric

                                        The compact and robust handheld chamfering machines are particularly suitable for preparing weld seams of large workpieces, also with milling angles and shear rates.
                                        Simple handling of the machines ensures optimal selection of weld seam preparation at straight edges and round plates. The milling angle is adjustable.

                                        ADVANTAGES

                                        • Simple chamfer and angle adjustment
                                        • Wear-resisting, hardened guide
                                        • Guide plates with rollers for easy pushing (only ASO 760-2)
                                        • Sturdy casting construction with ergonomic handle

                                        There is an easy and soft processing chamfer start possible up to 20 mm chamfers, particularly by processing of large workpieces. The chamfer and deburring machine ASO 750 | ASO 760 is just the right decision for these processes.

                                      • ASO 760-3 - CHAMFERING MACHINE, DEBURRING MACHINE

                                      • Handheld, electric

                                        The compact handheld chamfering machine is particularly suitable for weld seam preparation of large workpieces. The new, 3-row cutter head with screwed cutting inserts is advantageous for heavy cuts in aluminium or stainless.

                                        ADVANTAGES

                                        • Simple chamfer and angle adjustment
                                        • Wear-resisting, hardened guide plates
                                        • Sturdy cast-iron construction with ergonomic handle

                                        There is an easy and soft processing chamfer start possible up to 20 mm chamfers, particularly by processing of large workpieces. The chamfer and deburring machine ASO 760-3 is just the right decision for these processes.

                                    • CHAMFERING MACHINE, HANDHELD

                                        • ASO 300 | ASO 310 - CHAMFERING MACHINE

                                        • Handheld, pneumatic

                                          The pneumatic, handheld chamfering machines are an ideal solution for deburring straight edges and contours on flat workpieces. Especially one hand processing is a great advantage. Restroot must be at least 2 mm.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Clean and consistent processing of component parts and series
                                          • Fast convert or replace of the carbide-cutting inserts
                                          • Suitable for continuous operation

                                          Chamfering straight edges and contours is the right work for the handheld, pneumatic chamfering machines ASO 300 | ASO 310. It is suitable for all materials.

                                        • SMA 20-EF24 | SMA 20-PF25 - CHAMFERING MACHINE

                                        • Handheld, electric|pneumatic

                                          The electric, handheld chamfering machines are an ideal solution for deburring contours and also straight edges on even and flat materials. Two-hand operation with ergonomic handle enables stable and safe deburring and bevelling. Restroot must be at least 2 mm.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Adaptable, also at difficult contours
                                          • Clean and consistent processing of component parts and series
                                          • Fast convert or replace of the carbide-cutting insert
                                          • Small cutter head with cutting inserts also for bores from ø 19.4 mm
                                          • Very economic insert price, because of 8 usable cuts per insert
                                        • SMA 30-EVR24 | SMA 30-PV25 - CHAMFERING MACHINE

                                        • Handheld, pneumatic|electric

                                          The pneumatic, handheld chamfering machines are an ideal solution for bevelling internal and external edges and contours as well as bores. A wide range of accessories allows a stable, secure and vibration-free chamfering of different materials. Restroot must be at least 2 mm.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Exact adjustment due to existing scaling
                                          • Small cutter head with cutting inserts also for bores from 10 mm
                                          • Low tool costs - each insert has 8 cuts
                                          • Long useful life due to stable, screwed cutting inserts

                                          Chamfering up to 6 mm in one cut is very simple with the chamfering machine SMA 30-PV25. Angular adjustment of 30 °, 45 ° and 60 ° are completely uncomplicated with this chamfering machine.

                                        • ASO 312 | ASO 313 - CHAMFERING MACHINE

                                        • Handheld, pneumatic | electric

                                          The compact and robust, handheld chamfering machines are particularly suitable for chamfering straight edges on flat workpieces even with outstanding burrs. Stable, screwed cutting inserts guarantee long tool life. Restroot must be at least 1 mm.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Clean and consistent processing of component parts and series
                                          • Fast retrofit or replace of the carbide-cutting inserts
                                          • Wear-resisting, hardened guide rails
                                          • Long useful life of the cutting inserts
                                          • Adjustable according to right- or left-hander
                                          • Angle-adjustable rails

                                          The variable angel adjustment (15-45 °) at the chamfering machine ASO 312 offers advantages for the weldseam preparation.

                                        • SMA 40-E | SMA 50 BEM-V | SMA 40-P - CHAMFERING MACHINE

                                        • Handheld, pneumatic|electric

                                          Apart from the rapid chamfer retooling system for efficient and economic use, the chamfering machines have also a spring technology for smooth and insert protecting cut. Internal and external edges, contours and bores on flat material can be machined in vibration-free operation.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Proper processing for welding preparation
                                          • Efficient chamfer retooling system
                                          • Special spring technology saves the tools
                                          • Better tool life for cutting inserts
                                          • Ergonomic two-hand operation

                                          The advantage is their mobile use also for large components. The handling is safe and easy and you have a rapidly retooling.
                                          Even difficult contours represent no problem for the pneumatic and electric, handheld bevelling machines.

                                        • SMA 60 BEM-V - CHAMFERING MACHINE

                                        • Handheld, electric

                                          Most powerful hand machine center for hand use. Highly advanced technology allow large bevells in a soft and smooth cut - even in one pass.

                                          ADVANTAGES

                                          • Absolutely burr-free cutting
                                          • Proper processing for welding preparation
                                          • Efficient chamfer retooling system
                                          • Special spring and mass technology allows a heavy and soft cut
                                          • Better tool life for inserts and cutter
                                          • Ergonomic two-hand operation

                                          The advantage is its mobile use also for large components. The handling is safe and easy and you have a rapidly retooling.
                                          Even difficult contours represent no problem for the handheld, electric bevelling machine SMA 60 BEM-V.

                                      • MOBILE & STATIONARY

                                          • KBM 18 - CHAMFERING MACHINE

                                          • The automatic chamfering machine for rough shearing of edges by means of a cutting wheel is ideal for quick and noisless bevelling. It can be used stationary or portable.

                                            ADVANTAGES

                                            • Automatic feed
                                            • Easy angle adjustment
                                            • Easy operation and setting
                                            • Sturdy construction

                                            The robust chamfering machines are characterized by an ease of use as for example the quick angle adjustment.

                                          • QUICKER | MAXIQUICKER -CHAMFERING MACHINE

                                          • Selfpropelling

                                            The automatic chamfering machines Quicker | Maxiquicker are designed for the stationary and portable use in weld seam preparation. A cutting wheel shears off the edge in a low-noise and dust-free way, leaving a rough chamfer. High feed rate.

                                            ADVANTAGES

                                            • Automatic feed
                                            • Easy angle adjustment
                                            • Easy operation and setting
                                            • High feed rate with low noise
                                            • Sturdy construction

                                            The robust chamfering machines are characterized by an ease of use as for example the quick angle adjustment.

                                          • ASO 900 | ASO 900 PLUS | ASO 900 PLUS-BIGGER - CHAMFERING MACHINE

                                          • Selfpropelling

                                            Large size workpieces or long bars with angles from 15° – 60° can be machined easily in heavy cuts. Extremely good tool life is the result of low revolution milling. Even materials like hardox, tank steels or stainless steels are economically cut.

                                            ADVANTAGES

                                            • Best tool life also in stainless steel
                                            • The setting of angle and also of plate thickness is easily done
                                            • Automatic feed adjustment depending on the relevant material from 0-1m/min.
                                            • Sturdy cast iron/steel construction, hardened work table with guide rollers
                                            • Working height 800-980 mm
                                          • ASO 930 | ASO 930 PLUS - CHAMFERING MACHINE

                                          • Selfpropelling

                                            With the ASO 930 |  ASO 930 Plus milling the front- and bottom side on the workpiece is now possible. The turning of the workpiece is no longer necessary.

                                            ADVANTAGES

                                            • Simple bevel- and angle adjustment
                                            • Automatic feed regulation depending on the material of 0 - 1,2 m / min
                                            • Sturdy cast iron construction
                                            • Hardened worktable with guide rollers
                                            • Working height 820 - 970mm
                                          • ASO 910 - CHAMFERING MACHINE

                                          • Selfpropelling

                                            Recess chamfering or the removal of cladding of large sheets is mastered excellently by the automatic chamfering machine ASO 910. Thanks to its robust version, the machine achieves a chamfer width up to 50 mm and a chamfer depth up to 15 mm. The machine is unique in this performance category.

                                            ADVANTAGES

                                            • Feed in X- and Z-axis, as well chamfer angle is easily adjusted
                                            • Automatic feed adjustment depending on the relevant material from 0-1m/min.
                                            • Sturdy cast iron/steel construction, hardened work table with guide rollers
                                            • Working height 930 - 1120mm

                                            A big advantage of the chamfering machine ASO 910 is its mobility. Mounted on the roller carriage or hanging on the crane - the flexibility of the bevelling and chamfering machine ASO 910 is a strong point of this machine. The bevelling machine ASO 910 is perfectly suited for the continuous operation.

                                          • ASO 920 - CHAMFERING MACHINE

                                          • Selfpropelling

                                            The largest welding chamfers - in tulip shape - can be cut efficiently with the ASO 920. This automatic chamfering machine convinces in this league of performance.

                                            ADVANTAGES

                                            • Simple chamfer- and angle adjustment
                                            • Automatic feed regulation depending on the material of 0 - 1.2m/min
                                            • Infeed in Z up to max. 90 mm is possible
                                            • Infeed in X up to max. 55 mm is possible
                                            • Sturdy cast iron construction, hardened work table with guide rollers
                                            • Working height 920 - 1110mm
                                        • STATIONARY MACHINES

                                        • Chamfering machines for small workpieces to the weld seam preparation on flat steels.
                                            • EDGE GRINDING MACHINES

                                                • BKE 550 - SHEET DEBURRING MACHINE

                                                • The compact plate Deburring Machine is suitable for deburring of straight plate edges.

                                                  ADVANTAGES

                                                  • Sturdy sustainable sheet construction with exhauster
                                                  • Grinding wheels readjustable via hand wheel
                                                  • Quick plate thickness adjustment by screws
                                                  • Easy handling and fast tool change

                                                  The extraction of the sheet deburring machine BKE 550 protects you from grinding dust and ensures a clean workplace. The quick tool change and the very easy operation without training time make the sheet deburring machine BKE 550 to a hardworking helper.

                                                • AF 165 - BEVELING MACHINE WITH SANDING DISC

                                                • Very efficient in removing saw burrs and sharp edges. Workpieces can be handeled and processed safely. Fast and cost effective deburring. The tool life of flap discs or CBN/Diamand grinding wheels is rather economic.

                                                  ADVANTAGES

                                                  • Easy operation
                                                  • Uncomplicated tool change
                                                  • Freely adjustable chamfer adjustment
                                                  • Hardened guide rails
                                                  • Clean working place due to exhauster

                                                  The exhausting of the grinding wear by an exhauster, the chamfering and grinding machine AF 165 guarantees a problem free working and a clean working station.

                                                • KSM 125 | KSM 130 - CHAMFER GRINDING MACHINE FOR STRAIGHT EDGES

                                                • Chamfer Grinding Machine for Straight Edges

                                                  Suitable for precise deburring and chamfering of straight edges at hardened steel. It is available with wet-grinding or dust extraction device.

                                                  ADVANTAGES

                                                  • Sturdy construction with grinding disk adjusting button
                                                  • Water cooling provides workpiece and grinding disk
                                                  • V-prism with micrometer chamfer adjustment
                                                  • Sturdy conical 2-zone grinding disk for strong material removal
                                              • EDGE MILLING MACHINES FOR STRAIGHT EDGES

                                                  • SPEEDY PRISMA 210-P | SPEEDY PRISMA 210-PSL - BEVELING MACHINE WITH SLIDING CARRIAGE

                                                  • This deburring machines are easy, sturdy table machines with a prismatic sliding carriage for efficient and precise processing of longitudinal edges of small workpieces.

                                                    ADVANTAGES

                                                    • Surface protecting precision chamfers up to 2 mm (no scratches on the surface)
                                                    • Easy operation
                                                    • Fast tool change, easy cutter setting
                                                    • Speed control for processing different materials
                                                    • Supported sliding carriage for clatter-free milling

                                                    The handiness and the very easy operation award this edge milling machine Speedy Prisma. For soft materials the rotation speed of the motor can be easily increased.

                                                  • FS 5 - BEVELING MACHINE WITH V-PRISM

                                                  • The FS 5 is a sturdy and cost-effective chamfering machine with sliding cutter and tips. Straight edges of rectangular-shaped
                                                    workpieces can be easily chamfered. The workpiece must be thicker than 2 mm.

                                                    ADVANTAGES

                                                    • Easy handling
                                                    • Sturdy guide rails
                                                    • Fast change of cutter head and cutting inserts
                                                    • Small chip box

                                                    The quick and trouble-free insert change on the chamfering machine FS 5 saves valuable working hours.

                                                  • ASO 850-K - BEVELING MACHINE WITH V-PRISM FOR STRAIGHT EDGES

                                                  • The sturdy chamfering machine is designed for deburring and edge cutting of small workpieces from 2 mm thickness. Thanks to the optimised interplay of cutter head and cutting inserts, the machine ensures clatter-free, clean and constant chamfering up to 3 mm × 45° in a section, even at stainless.

                                                    ADVANTAGES

                                                    • Chamfer adjustment via micrometer button
                                                    • Effortless chamfering due to low cutting pressure
                                                    • Sturdy cast iron construction with chip box
                                                    • Wear-resistant, hardened and ground guide rails
                                                    • Wide variety of different cutting inserts for various materials

                                                    The contour set with a large table and an insert cutter with a roller bearing chamfers clean bevels on workpieces in various sizes and forms. The quick change of the inserts presents the high productivity of the beveling machine ASO 850-K, special for the contours.

                                                  • ASO 650 | ASO 650-WSL - CHAMFERING MACHINE WITH V-PRISM FOR STRAIGHT EDGES

                                                  • Deburring and chamfering of small workpieces is an easy job. Rounding of edges in use with radius inserts is also possible. Speed control is very useful when processing aluminum or stainless steel. Workpiece thickness must be more than 2 mm.

                                                    ADVANTAGES

                                                    • turdy cast iron construction with swarf drawer
                                                    • Wear-resistant, hardened and ground guide rails
                                                    • Precise chamfer adjustment by micrometer button in X and Z axle
                                                    • Wide variety of different cutting inserts for various materials
                                                    • Used inserts from milling machine can be used here a further time

                                                    The micrometric adjustment from 0-7 mm chamfering occurs in one cut. The moving undercarriage enables the perfect working height and makes the chamfering machine ASO 650-WSL mobile. The speed control of the beveling machine ASO 650-WSL is very useful in the machining of aluminium or stainless steels.

                                                  • ASO 160-S | ASO 160-SSL - CHAMFERING MACHINE WITH V-PRISM FOR STRAIGHT EDGES

                                                  • Whether individual parts or series production, the ASO 160-S/SSL is an indispensable assistant in all metalworking operations. You can easily process both small parts and bars. The optically polished looking chamfer surfaces represent the skill of the machine.

                                                    ADVANTAGES

                                                    • Small parts can be processed quickly and easily by hand
                                                    • Bars are chamfered by means of the automatic feed
                                                    • Constantly high surface quality
                                                    • Chamfer adjustment by micrometer screw
                                                    • Speed regulation (ASO 160-SSL)
                                                    • Fast tool change
                                                    • V-prism for ideal guidance of the workpieces
                                                    • Hardened and polished guide bars
                                                    • Soft cutting pressure

                                                    The automatic, stepless feed of the chamfering machine ASO 160 transports the workpieces effortlessly over the guide rails and ensures regularly milling edge. By the speed regulation of the beveling machine ASO 160 the precondition is created for the processing for both highly alloyed steels and for Alu. Through the attachment of roller conveyors giving a special guidance also long workpieces can be beveled.

                                                  • ASO 160-M | ASO 160-MSL - CHAMFERING MACHINE WITH V-PRISM FOR STRAIGHT EDGES

                                                  • The chamfering without root face is the unique feature. Excellent chamfer quality is achieved by milling head with triangle inserts. The cut is soft and excellent in appearance.

                                                    ADVANTAGES

                                                    • Sharp-edged chamfering is possible, e.g. a 3mm x 45° bevel can be machined on a 3 mm thick workpiece
                                                    • Small parts can be processed quickly and easily by hand
                                                    • Bars are chamfered by means of the automatic feed
                                                    • Constantly high surface quality
                                                    • Chamfer adjustment via micrometer screw
                                                    • Speed regulation (ASO 160-MSL)
                                                    • Fast tool change
                                                    • V-prsim for ideal guidance of the workpieces
                                                    • Hardened and polished guide bars
                                                    • Soft cutting pressure
                                                  • WKF 170 - CHAMFERING MACHINE

                                                  • Angle adjustable

                                                    The perfect machine for chamfering small to mid-size workpieces and bar material. Thanks to its angle adjustment from 15° – 60°, it is mainly used for weld seam preparation.

                                                    ADVANTAGES

                                                    • Simple and fast angular adjustment
                                                    • Consistent high surface quality
                                                    • Automatic feed facilitates chamfering
                                                    • Sharp-edged chamfering is possible, e.g. a 5mm x 45°chamfer can be applied to a 5 mm thick workpiece
                                                    • Angular adjustment from 15° - 60° (set out every 5° possible)
                                                    • Chamfer adjustment by micrometer button
                                                    • Speed control for processing different materials
                                                    • Uncomplicated tool change
                                                    • Hardened and polished guide rails
                                                    • Soft cutting pressure

                                                    The automatic feed of the beveling –and chamfering machine WKF 170 becomes to a true helper. The feed transports the workpieces with a continious pressure over the guide rail and enabels a clean and chatter-free bevel. The mobile undercarriage gives the angle adjustable chamfering machine WKF 170 mobility. The adjustable angles of 15 ° -30 ° -45 ° -60° show the great flexibility of the beveling machine WKF 170 and make it in the weld preparation to an indispensable companion.

                                                  • MMB 400 | MMB 500 | MMB 600 - CHAMFERING MACHINE

                                                  • Angle adjustable

                                                    The machines show as well a high abrading power as a high chamfer quality. It is mainly used for welding bevels up to 25° – 60°, but also for optical bevels on straight edges, end of tubes and round steel plates.

                                                    ADVANTAGES

                                                    • Precise workpiece guide
                                                    • Steady and consistent good surface quality
                                                    • Bar material can be chamfered by using the automatically feed
                                                    • Large pad table
                                                    • Chamfering without root face
                                                    • Angle adjustment up to 25°- 60°
                                                    • Speed regulation for the processing of different materials
                                                    • Adjustable feed speed
                                                    • Minimum lubrication
                                                • EDGE MILLING MACHINES FOR CONTOURS

                                                    • SPEEDY KONTUR 270-K | 270-KSL | 320-K | 320-KSL - BEVELING MACHINE FOR CONTOURS

                                                    • The stationary edge and contour beveling machines are perfectly suitable for deburring and chamfering internal and external edges of flat workpieces. The machines are compact and handy table devices which are ideally used also besides CNC machines.

                                                      ADVANTAGES

                                                      • Perfect for alu and plastic processing
                                                      • Suitable for processing small to medium-sized workpieces
                                                      • Short tooling times at maximum flexibility
                                                      • Excellent chamfers by best spindle accuracy
                                                      • For continuous use with brushes motor
                                                      • Easy operation
                                                      • Fast tool change
                                                      • Speed control (only with Speedy Kontur 270-KSL and Speedy Kontur 320-KSL)
                                                      • Chamfer angle can be changed due to contour cutter with different point angles

                                                      The handling of the contour milling machine Speedy Kontur is unbeatable. The small table machine fits into the smallest gap and is very space-saving. The long life tools make possible an inexpensive operation.

                                                    • KKE 1 | KKE 2 - BEVELING MACHINE FOR CONTOURS

                                                    • Straight edges, bores, long holes, grooves are chamfered precisely, fast and easily. V-prism attachment for the processing of straight edges rounds off the whole package. The big help for a small price.

                                                      ADVANTAGES

                                                      • Internal and external contours can be chamfered and rounded
                                                      • Dimensional accuracy thanks to ball bearing guide or guide ruler
                                                      • Very good chamfer quality
                                                      • Long tool life of the t.c cutters
                                                      • Compact handy tabletop unit next to the CNC milling machine and CNC lathe
                                                      • Precise chamfer adjustment
                                                      • Speed control for processing different materials
                                                      • Chamfer angle can be changed due to contour cutter with different point angles
                                                      • Fast tool change

                                                      The long tool life is a great advantage of this small, handy table machine. The V-Block for processing of straight edges completes the overall package of this beveling machine KKE 1 / KKE 2.

                                                    • ASO 600-A | ASO 600-ASL - BEVELING MACHINE FOR CONTOURS

                                                    • The small and compact machine chamfers or rounds edges precisely, safely and with ease. It leaves chatter-free bevels and radii on rectangular and round workpieces in different materials, internally and externally. Its universality makes the machine unique!

                                                      ADVANTAGES

                                                      • For continuous use with brushless motor
                                                      • Tool change within a few seconds
                                                      • O-point setting of cutters
                                                      • Inbuild vacuum extractor
                                                      • Compact, handy tabletop unit next to the CNC milling machine and CNC lathe
                                                      • Precise chamfer adjustment
                                                      • Chamfer angle can be changed due to contour cutter with different point angles
                                                      • Fast tool change with tool setting device
                                                      • Hardened table with extraction socket

                                                      A big and essential advantage is the long lifetime of the tools of the chamfering machine and edge bevelling machine ASO 600-A | ASO 600-ASL for contours. The tool change and the suitable adjustment are very fast and easily carried out. Many options like V-prism or sliding table with exhaust connector make the universal contour chamfering machine for edges ASO 600-A | ASO 600-ASL to an all-rounder.

                                                    • KKF 4 | KKF 4-SL - CHAMFERING MACHINE FOR CONTOURS

                                                    • Chamfering Machine for Contours

                                                      The spindle bearings mounted under pre-stress lend high-precision concentricity to the KKF 4. It can be used both full hard metal-form cutters and insert milling cutters, by means of which an excellent useful life is achieved.

                                                      ADVANTAGES

                                                      • Big supporting table with parallel table movement for height setting of chamfer
                                                      • Very good concentricity
                                                      • Continuous operation
                                                      • Tool change within a few seconds
                                                      • T.c cutter with roller bearing Ø 6 mm and shark cutter with roller bearing Ø 16 mm
                                                      • Precise chamfer adjustment by micrometer button
                                                      • Chamfer angle can be changed due to contour cutter with different point angles
                                                      • Fast tool change
                                                      • Wide selection of cutters
                                                      • Speed regulation
                                                      • Hardened machine table with extraction socket

                                                      It must be particular pointed out the hardened and polished table top on top of the sturdy construction of the chamfering machine KKF 4. The precise chamfer adjustment takes place over a micrometer screw on the side of the contour chamfering machine and can be easily handled even by unskilled persons. The proved cutters offer a high tool lifetime and can be changed simple and time-efficient. A chatterfree and effortless milling is another advantage of the contour chamfering machine, which can be used not only for single operations but also in series.

                                                    • KKF 3 - CHAMFERING MACHINE FOR CONTOURS

                                                    • It is our most powerful chamfering machine for edges and contours, having the biggest supporting table. Its sturdy insert milling cutters are ideally suitable for processing larger and heavier workpieces.

                                                      ADVANTAGES

                                                      • Big supporting table
                                                      • Sturdy insert milling cutter with roller bearing Ø 16 mm or Ø 30 mm
                                                      • For continuous operation
                                                      • Inbuilt vacuum extractor
                                                      • Precise chamfer adjustment by micrometer button
                                                      • Chamfer angle can be changed by using various insert milling cutters
                                                      • Speed regulation
                                                      • Fast and easy tool change
                                                      • Hardened machine table with extraction socket

                                                      The robust machine construction and the hardened table of the chamfering machine for contours KKF 3 make the machining of big workpieces possible. The quick change of the inserts and of the insert cutter saves money and time. Not only chamfers but radii from R1 up to R5 you can make with the chamfering and contour machine KKF 3.

                                                  • STONE VIBRATION DEBURRING AND SLIDE GRINDING MACHINES

                                                      • TV 95-SL - TUB VIBRATOR

                                                      • Stone Vibration Deburring and Slide Grinding Machine

                                                        As large as a washing machine, the tub vibrator has a capacity of 95 l. It is our standard machine and ideal for prototypes and small series.

                                                        ADVANTAGES

                                                        • Deburring and polishing different parts with just one machine
                                                        • Easy separation with the help of the separator
                                                        • Vibration strength freely selectable
                                                        • Simple emptying via an outlet at the side of the machine
                                                        • Quiet due to noise protection hood
                                                        • With timer
                                                        • With integrated water tank for wet processing
                                                        • Sturdy, long-life construction with plastic-coated steel trough inside
                                                        • Mobile at any time by means of rollers on the underside
                                                        • Mixture ratio (grinding tool: workpieces) 7:1 to 3:1

                                                        With the timer you can determine the exact duration of the application. You are not depend on switching off the machine. The noise protection cap of the rotofinishing machine TV 95-SL ensure a quiet processing and by the robust construction the machines become long-standing and reliable assistants.

                                                      • TV 15-SL | TV 40-SL | TV 100-SL | TV 200-SL - TUB VIBRATOR

                                                      • Stone Vibration Deburring and Slide Grinding Machine

                                                        The tub vibrators have a capacity from 18 to 240 l. They make it possible to process workpieces with different shapes and sizes. Sensitive workpieces can be contactless processed by means of chambers or workpiece carriers.

                                                        ADVANTAGES

                                                        • Sturdy, long-life construction with plastic-coated steel trough inside
                                                        • Consistent affect on the entire surface
                                                        • Very easy emptying of the tub after processing
                                                        • Ideal, also for longer workpieces
                                                      • ASM 18 | ASM 60 - CENTRIFUGAL PLANT

                                                      • Centrifugal Plant

                                                        The centrifugal grinding machine ASM is ideal for small parts and has a tenfold to twentyfold better processing intensity in comparison with conventional vibratory finishing machines. The centrifugal  grinding machine can be planned as a single device up to a fully automatic plant.

                                                        ADVANTAGES

                                                        • Sturdy, long-life construction with plastic-coated steel trough inside
                                                        • Easy emptying due to a tiltable work tank
                                                        • Compact device including base frame and manual separation (ASM 18)
                                                      • RV 40-SL | RV 120-SL | RV 220-SL | RV 420-SL - ROTARY VIBRATOR

                                                      • Stone Vibration Deburring and Slide Grinding Machine

                                                        The rotary vibrators can be universally used for deburring, rounding edges, cleaning up to polishing for small and short parts. As individual plant or in combination with further post-treatment equipment, such as dryer or separator, the rotary vibrator plant increases to a fully automatic deburring centre.

                                                        ADVANTAGES

                                                        • Simple emptying via an outlet at the side of the machine
                                                        • With timer
                                                        • Sturdy, long-life construction with plastic-coated steel trough
                                                        • Integrated separation
                                                        • Ease of operation and maintainance
                                                      • RT 200 | RT 400 | RT 600 | RT 800 - ROTARY DRYER

                                                      • Rotary Dryer

                                                        The rotary dryers are suitable for spotless drying of workpieces of all sorts. By using the hot-air blower, a uniform drying of the workpieces and of the granulates is ensured.

                                                        ADVANTAGES

                                                        • Sturdy, long-life construction with plastic-coated steel trough inside
                                                        • Consistent affect on the entire surface
                                                        • Spotless drying
                                                        • Consistent drying quality
                                                        • Increase tool life of granulate
                                                        • Good workpiece circulation and transport by tubvibrations
                                                           
                                                      • MZ 35 | MZ 90 - CENTRIFUGE

                                                      • Centrifuge

                                                        The centrifuge is a compact, space-saving and individual plant for the treatment of process water. The dirt particles are separated with a 2000-fold acceleration of gravity (g) from the process water.

                                                        ADVANTAGES

                                                        • Easy operation
                                                        • Very high degree of cleaning
                                                        • Re-use of the liquids
                                                        • Kind to people and environment
                                                        • Can be used for several plants
                                                    • POWER ENGINE

                                                          • UA 5 - POWER ENGINE

                                                          • Whether grinding, polishing, brushing or deburring - the universal drive engine Starmax UA 5 is used in all materials. A wide variety of tools makes the machine very flexible and indispensable in your production.

                                                            ADVANTAGES

                                                            • Infinitely variable speed regulation
                                                            • Easy handling and operation
                                                            • Smooth running due to massive spindle bearing
                                                            • Maintenance-free due to frequency converter
                                                            • Usable for commercially available grinding, polishing, brushing and deburring tools

                                                            You can use all standard grinding tools, polishing tools and brushes in this UA 5. Simplest operation and the variety of tools that are compatible with this machine, make the machine to a main character in your workshop.

                                                      • TOOL GRINDING MACHINES

                                                          • EDG 213 | EDG 1226 - DRILL GRINDER

                                                          • The handy drill grinders are ideal for grinding HSS- and HM-spiral drills. Due to the adjustable point angles from 90° to 140°, this model can be universally used. Easy handling and their efficiency make these machines a real winner in the field of drill grinding.

                                                            ADVANTAGES

                                                            • Good handling thanks to easy and practical design
                                                            • Top thinning and regrinding of drills by specially guided collet chucks
                                                            • With back taper for perfect cut
                                                            • Universe adjustable point angle
                                                            • Durable grinding disk

                                                            The very easy operation of the drill grinders EDG 213 and EDG 1226 is a great advantage. The drill bit is clamped by a collet in a chuck and is ground and thinned in one work process. The simple operation and the durable grinding wheels make the drill grinding machines EDG 213 and EDG 1226 to an affordable, reliable and economical assistant.

                                                          • NEUTRIX - ELECTRODE GRINDING MACHINE

                                                          • The Neutrix is a small, low-weight portable grinding machine. The electrode needle is centrically grinded and in longitudinal direction. The precision of tungsten electrodes is quite accurate. A stand can be mounted for use on the bench.

                                                            ADVANTAGES

                                                            • Integrated dust exhaust
                                                            • Stepless point angle 15° - 180°
                                                            • Eccentric disk enables 3-fold utilization of the diamond disk
                                                            • Short grinding time - only 0.3 mm consumption per grinding process due to grinding gauge
                                                            • Speed regulation for optimal grinding speed
                                                            • Grinding tungsten electrodes up to 15 mm is possible by means of a special collet

                                                            On the degree scale of electrode grinding machine Neutrix the desired sharpening angle can be adjusted variably. Grinding angles of 7.5 ° to 90 ° result tip angles of 15 ° to 90 °. With a special chuck short tungsten electrodes can also be ground up to 15 mm length.

                                                        • Carbide cutters

                                                        • High efficient processing of metal.
                                                            • Solid carbide HPC milling cutter ICE MILL

                                                            • FOR STEELS UP TO 60 HRC AND CAST IRON

                                                              A solid carbide HPC milling cutter with 4 cutting edges 35°/38°, variable spiral and corner chamfer/ corner radius (d=3,00-25,00). Use at stable clamping conditions.

                                                            • Solid carbide HPC milling cutter RHINO MILL rough

                                                            • FOR STEELS UP TO 60 HRC AND CAST IRON

                                                              A solid carbide HPC milling cutter "rough" with 4 cutting edges 30°/32°, variable spiral and corner chamfer (d=4,00-25,00). Use at instable clamping conditions.

                                                            • Solid carbide HPC milling cutter ICE INOX

                                                            • FOR STAINLESS STEEL AND SUPERALLOY

                                                              A solid carbide HPC milling cutter ICE INOX with 4 cutting edges 38°/41°, variable spiral and corner chamfer (d=3,00-25,00). Use at stable clamping conditions.

                                                            • Solid carbide HPC milling cutter RHINO INOX rough

                                                            • FOR STAINLESS STEEL AND SUPERALLOY

                                                              Solid carbide HPC milling cutter "rough" with 4 cutting edges 38°/41°, variable spiral and corner chamfer (d=4,00-25,00). Use at instable clamping conditions.

                                                            • Solid carbide HPC milling cutter TYP Razer mill & ALU T-MILL

                                                            • FOR ALUMINIUM

                                                              An aluminium HPC milling cutter with 2-3 cutting edges, variable spiral and corner chamfer (d=3,00-25,00).

                                                            • Trochoidal milling cutters 3xD/4xD/5xD

                                                            • A shaft milling cutter with 5 cutting edges and a chip breaker for trochoidal millings, corner chamfer up to 48 HRC (d=6,00-20,00).
                                                            • Solid carbide tough milling cutters < 68 HRC Typ

                                                            • ASSCUT, the new dimension for HSC and hard millings - Solid carbide HSC shaft milling cutter with corner chamfer/ corner radius.

                                                          • Carbide tools

                                                          • For universal operation.
                                                              • Solid carbide high performance driller Without/with internal cooling 3xD / 5xD / 8xD

                                                              • Solid carbide high performance driller without/with internal cooling 3xD/5xD/8xD (d=3,00-20,00)
                                                              • HPC SINKER

                                                              • HSS or solid carbide, special coating, dissected cutting edges, radial relief grinded (d=4,30-33,00).
                                                            • Carbide deburring

                                                            • For all contour chamfering machines which are available on the market of any makes.
                                                                  • Deburring cutters

                                                                  • Accessories are suitable for: SPEEDY KONTUR 270 / 320-E, KKE 1 / KKE 2, ASO 600-A, KKF4 / KKF4-SL.
                                                              • Threading tools

                                                              • Threading tools for an universal use. For hard processing, please request our special thread taps.
                                                                  • Thread cutters

                                                                  • Thread cutters for machines, TYP VA for all common materials. A perfect solution for VA and tool steel.
                                                                  • Thread shaper

                                                                  • Internal thread shaper, Typ VA for stainless materials and steel with a high stability.