Ploeger
  • Offer Profile
  • Ploeger, harvesting with a great feeling!
    The Ploeger company focuses its efforts on the development and manufacturing of technically advanced and reliable harvesting systems. Their years of experience and research and also close contacts with the end-users and the vegetable processing industry resulted in a worldwide successful line of harvesting systems. The Ploeger combines are renowned for their optimal crop yield, low maintenance cost and their very high reliability under any kind of weather and tillage conditions.
Product Portfolio
  • Potato harvesters

  • A four row harvester equipped with independent lifting units electronic depth control. A big variation of cleaning modules for different crops and soil conditions. All adjustments in hand reach of the operator.
    Low drops of the product trough out the machine and of the unloading belt in to the truck or trailer. This machine is designed to operate in all weather and field conditions and manufactured to the requirements of the professionals in the potato industry. It will go where others can’t.
  • PLOEGER AR-4B POTATO HARVESTER

  • A four row tanker harvester with a 13 tons hopper capacity, and 2x2 independent lifting units. Depth control on each row a big variation of cleaning modules for different crops and soil conditions. All adjustments in hand reach of the operator seat.
    Low drops of the product trough out the machine and of the unloading belt in to the truck or trailer. This machine is designed to operate in all weather and field conditions and manufactured to the requirements of the professionals in the potato industry. It will go where others can’t.
    • Engine
      - Deutz TCD 2015 V06
      - Water cooled COMIII Diesel engine
      - 330KW / 1900 rpm
      Drive
      - Hydrostatic 4 wheel drive
      Speed
      - 0 - 7 km/hr. field
      - 0 - 25 km/hr. road
    • Main frame
      - Solid box section construction
      Fuel tank
      - 950 litre
      Hydraulic tank
      - 350 litre
      Steering
      - front axle 45 degrees
      - Rear axle 15 degrees
       
    • Digger units
      - 2 independent pulled digger units 2x2 rows
      Hopper
      - 17 cubic mtrs.
      Discharge elevator
      - Adjustable unloading height from 1.ooo mm up to 4.200 mm
      - Elevator width 1.440 mm, for easy unloading on the go
      - With swan-neck to minimise drop height in trailer/container
  • PLOEGER AR-4W POTATO HARVESTER

  • A four row harvester equipped with independent lifting units electronic depth control. A big variation of cleaning modules for different crops and soil conditions. All adjustments in hand reach of the operator.
    Low drops of the product trough out the machine and of the unloading belt in to the truck or trailer. This machine is designed to operate in all weather and field conditions and manufactured to the requirements of the professionals in the potato industry. It will go where others can’t.
    • Engine
      - Deutz type TCD-2015-v06-4v
      - Water-cooled turbo charged with intercooler
      - 300 kw - 1.500 rpm
      Drive
      - Hydrostatic tracks and front wheels
      - Electric switchable rear axle High/Low
      Speed
      - Field (low / middle / high) 7 - 13 km/h
      - Road (low / middle / high) 13 - 26 km/h
    • Tires
      - Front 270/95R54 (11.2R54)
      - Rear tracks 900 wide (700 wide in a 3 row conversion)
      Steering
      - Front axle 46.5°
      - Rear axle 18.5°
      - Cross levelling 5°
      Capacity
      - Fuel tank 950 l
      - Hydraulic oil tank 375 l
    • Standard
      First web
      - With electronic hightcontrol and hydraulic driven disks in digging unit
      - Two independent digging units for the AR- 4W 4x75 cm, web 2x1420 mm wide
      - Two independent digging units for the AR- 4W 4x90 cm, web 2x1620 mm wide
      - One digging unit for the AR-3W (3x36”) web 1x 2.550 mm wide
      Second web
      - 2.900 mm wide with 3 agitators
      - Optional cleaning systems
      Holdover elevator
      - 2.5 m3 holding capacity
      - Discharge elevatorbelt
      - Effective 1.200 mm wide
      - Adjustable height up to 4.350 mm
      - Running sidepanels
      Dimensions
      - Lenght: 14.7 mtr (depending on configuration)
      - Width: 3.4 mtr (for 4x75 cm and 3x36”)
      - Height: 3.9 mtr
      - Weight: aprox 24.5 tons (depending on configuration)
  • Pea harvesters

  • A profitable investment
    Efficient harvesting with a maximum result. That’s what it’s all about. The Ploeger Company has for decades put its efforts into the development of technically advanced and reliable harvesting machines. Many years of manufacturing and agricultural experience are forced into this highly sophisticated self-propelled pea harvester. EPD 538 the logical step forward to the successful EPD 490, EPD 520 and EPD 530.
    Thanks to the newly developed threshing system, the new heavy duty picking head and its efficient cleaning system the machine shows better recovery and higher capacity, under all weather and field crop conditions. The maximum capacity in relation to the low running and maintenance costs and low depreciation:
    That’s harvesting with result.
  • PLOEGER EPD-520 PEA HARVESTER

    • Engine
      - Deutz type BFM2015
      - Water-cooled diesel
      - Power 300 KW
      - 1500 rpm
      Drive
      - Hydrostatic 4 wheel drive
      Speeds
      - Field 0 - 7.1 km/hr.
      - Road 0 - 25 km/hr.
    • Tyres
      - Front 30.5 LR 32 172 A8
      - Rear 700 - 26.6 - 8 ply
      Steering
      - Rear wheels
      - Power assisted
      - Turning radius: 7.800 mm Inside
      Hopper
      - Capacity 2500 kg
      Capacity
      - Fuel tank 900 ltrs.
      - Hydraulic oil 350 ltrs.

      Length: 11.095 mm
      Width: 3.995 mm
      Height: 3.999 mm
      Weight: 21.600 kg
    • Levelling
      - Longitudinal: 12%
      - Cross: 15%
      Optional
      - Lubrication systems
      - Camera systems
      - Different tyres
      - Haulm spreaders
      - Broad bean conversion kit
      - Tracks instaed of front wheels
      - Braodbean direct cutter header
  • PLOEGER EPD-530 PEA HARVESTER

    • Engine
      - Deutz type BFM2015
      - Water-cooled diesel
      - Power 300 KW
      - 1500 rpm

      Drive
      - Hydrostatic 4 wheel drive

      Speeds
      - Field 0 - 7.1 km/hr.
      - Road 0 - 25 km/hr.
    • Tyres
      - Front 30.5 LR 32 172 A8
      - Rear 700 - 26.6 - 8 ply
      Steering
      - Rear wheels
      - Power assisted
      - Turning radius: 7.800 mm Inside
      Hopper
      - Capacity 2500 kg
    • Capacity
      - Fuel tank 900 ltrs.
      - Hydraulic oil 350 ltrs.

      Length: 11.095 mm
      Width: 3.995 mm
      Height: 3.999 mm
      Weight: 21.600 kg

      Levelling
      - Longitudinal: 12%
      - Cross: 15%

      Optional
      - Lubrication systems
      - Camera systems
      - Different tyres
      - Haulm spreaders
      - Broad bean conversion kit
      - Tracks instaed of front whells
      - Braodbean direct cutter header
  • PLOEGER EPD-538 PEA HARVESTER

  • A profitable investment.
    Many years of manufacturing and agricultural experience are forced into this highly sophisticated self-propelled pea harvester: Model EPD 538.
    Thanks to the newly developed bucketelevator, increased width of the podderbelt and top fan, the new COMIII engine means a big step forwards again. The machine shows better recovery and higher capacity, under all weather field and crop conditions. The maximum capacity in relation to the low running and maintenance costs and low depreciation:
    That’s harvesting with result!
    • Engine
      - Deutz type TCD-2015-v06-4v
      - Water-cooled diesel
      - Power 300 KW - 1.500 rpm
      Drive
      - Hydrostatic 4 wheel drive
      Speeds
      - Field 0 - 7.1 km/hr.
      - Road 0 - 26 km/hr.
    • Tyres
      - Front 30.5 LR 32 172 A8
      - Rear 700 - 26.6 - 8 ply
      Steering
      - Rear wheels
      - Power assisted
      Turning radius
      - 8.780 mm Inside
      Hopper
      - Capacity 2.200 kg
    • Capacity
      - Fuel tank 950 ltrs.
      - Hydraulic oil 350 ltrs.
      Dimensions
      - Length: 11.000 mm
      - Width: 3.999 mm
      - Height: 3.999 mm
      - Weight: 22.600 kg
      Levelling
      - Longitudinal: 12%
      - Cross: 15%
  • Bean harvesters

  • PLOEGER BP-2000 BEAN HARVESTER

  • Investing in reliability
    For many years Ploeger have put all its efforts, knowledge and energy into the development of technically advanced harvesting machines which are offering you a maximum result. The new BP2000 bean harvester is the result of Decca’s machine manufacturing and agricultural experience. It is a self propelled unit, complete with a large hopper. A modern reliable sophisticated harvester that even under the most adverse field and weather conditions, remains a perfect harvester. The low depreciation, low running and maintenance costs against the high recovery, makes the BP2000 a fruitful sound investment.
    Picking head
    The BP2000 picking head is 3.245 mm wide, equipped within rubber vulcanised picking fingers. The header is hinge connected to the machine, which enables it to follow the field contours. Picking height and reel speed are adjustable from inside the cab. An optimal picking result is achieved by the adjustable front coil: in height to the field and distance to the picking finger.
    Cleaning
    Three stage cleaning. The first 3 meter wide in-feed conveyor belt delivers the harvested product to the first cleaning stage: four in-line fitted suction fans. Two cross belts transporting the product to the 2nd conveyor belt to the second cleaning stage over a pintle belt, which removes by means of a suction fan a major part of the waste material. The almost clean product is transported to the third conveyor belt and onto the final third cleaning stage where the final suction fan cleans the product complete.
    The result: Optimal cleaning with a minimum of product loss.
    Hopper
    A higher efficiency with the 4.5 tons hopper holding capacity. With its unique lifting mechanism - unloading up to 4.375 mm at a safe distance from the machine. With the two independently controllable unloading chains in the hopper, the unloading can be fast and controllable.
    Drive
    Two heavy-duty drive axles in combination with a differential and four large 30.5 x 32 tyres guarantee optimal traction.
    In the field the machine can move crab-wise by using the steerable front axle for
    a maximum of free space between the tyre and the crop. In short: Highest reliability under all weathers and field conditions with a minimum of soil compaction.
    Console
    From the drivers seat, in the comfortable cab, all the controls are within easy reach of the operator, and easy to adjust.
    Panoramic windscreen – good visibility of the work.
    • Engine
      - eutz BF 6M 1013C 6 cylinder
      - Water-cooled diesel engine with turbo and intercooler.
      - Capacity – 283 KW at 2300 rpm.
      Drive
      - Hydrostatic 4-wheel drive with gearbox and differential
      Tyres
      - Front 900/55 X 32
      - Rear 900/55 X 32
    • Steering
      - Power assisted
      - Continues 4 wheel steering
      Turning radius
      - 4.815 mm
      Hopper
      - Holding capacity 4.5 ton
      - Unloading height approx. 4.375 mm
      Capacity
      - Fuel tank 800 litre
      - Hydraulic tank 350 litre
    • Dimensions
      - Length 11.505 mm
      - Width 3.522 mm
      - Height 3.999 mm
      - Wheel base 2.180 mm
      Weight
      - 18.880 kg
      Optional
      - Cluster remover or a,
      - Two reel de cluster unit
      - Automatic lubrication system
      - Camera system
  • PLOEGER BP-2100 BEAN HARVESTER

  • The new BP2100 bean harvester is the result of Decca’s machine manufacturing and agricultural experience. It is a self propelled unit, complete with a large hopper. A modern reliable sophisticated harvester that even under the most adverse field and weather conditions, remains a perfect harvester. The low depreciation, low running and maintenance costs against the high recovery, makes the BP2100 a fruitful sound investment.
    Picking head
    The BP2100 picking head (1) is 3.245 mm wide, equipped within rubber vulcanised picking fingers. The header is hinge connected to the machine, which enables it to follow the field contours. Picking height and reel speed are adjustable from inside the cab. An optimal picking result is achieved by the adjustable front coil: in height to the field and distance to the picking fingers. These functions can also be controlled from within the cab.
    Cleaning
    A multi stage cleaning process. The product is cleaned in “ 3 or 4 stages “ the elevator belt transports the harvested product over the full picking width in to the 1st cleaning stage, 4 in line powerful suction fans extracting the majority of leaves and waste from the beans. The 2nd elevator belt transports the product trough an optional cluster remover or a two reel de-cluster unit, to the next cleaning stage, where a 3 meter wide pinned belt in conjunction with a blower placed underneath removes the clusters and plant residuals. a 3rd 3 meter wide conveyor belt transport the almost clean beans to the final full width cleaning stage, 4 in line suction fans will extract the final waste from the beans before they are transported on to 2 cross belts to the hopper in- feed belt.
    Result: optimal cleaning with minimum losses.
    Hopper
    A higher efficiency with the 4.5 tons hopper holding capacity. With its unique lifting mechanism - unloading up to 4.375 mm at a safe distance from the machine. With the two independently controllable unloading chains in the hopper, the unloading can be fast and controllable.
    Drive
    Two Powerful drive shafts in combination with a differential, and 4 big 900/55-32 tyres guarantee optimal traction, due to the 4 wheel steering the machine has a very small turning radius, and is able to run crab wise for a maximum free space between the tire and the crop. Conclusion: Highest reliability under all weather and field conditions with a minimum on soil compaction.
    Console
    From the drivers seat, in the comfortable cab, all the controls are within easy reach of the operator, and easy to adjust.
    Panoramic windscreen – good visibility of the work.
    • Engine
      - eutz BF 6M 1013C 6 cylinder
      - Water-cooled diesel engine with turbo and intercooler.
      - Capacity – 283 KW at 2300 rpm.
      Drive
      - Hydrostatic 4-wheel drive with gearbox and differential
      Tyres
      - Front 900/55 X 32
      - Rear 900/55 X 32
      Steering
      - Power assisted
      - Continues 4 wheel steering
      Turning radius
      - 4.815 mm
       
    • Hopper
      - Holding capacity 4.5 ton
      - Unloading height approx. 4.375 mm
      Capacity
      - Fuel tank 800 litre
      - Hydraulic tank 350 litre
      Dimensions
      - Length 11.505 mm
      - Width 3.522 mm
      - Height 3.999 mm
      - Wheel base 2.180 mm
    • Weight
      - 18.880 kg
      Optional
      - Cluster remover or a,
      - Two reel de cluster unit
      - Automatic lubrication system
      - Camera system
  • Spinach harvesters

  • Self propelled spinach and greens harvesters
    We offer a wide range of spinach & greens harvesters from the multi purpose model BPMK2000 for beans and spinach, the MK2000L up to the high capacity container systems MKC 2TR, MKC 4TR, and MKC 8. One operator can harvest up to 30 containers with in 12 hours. In this range there is always a machine that suit your standards.
  • PLOEGER MK-2000L SPINACH HARVESTER

    • Engine
      - Deutz BF 6M 1013EC,6 cylinder water-cooled 165 kW output 2.300 r.p.m
      Drive
      Hydrostatic, 4-wheeldrive
      Speeds
      - Field: 0 - 7 kph
      - On road: 0 - 25 kph
    • Tyres
      - Front 800/65R32 167A8
      - Rear 800/65R32 167A8
      Steering
      - Powered
      Turning circle
      - 4.815 mm
      Hopper
      - Max. load approx. 28 m3
      - Unloading height approx. 4150 mm
    • Capacity
      - Fuel tank: 800 litres
      - Hydraulic-oil tank: 350 litres
      Dimensions
      - Length: 11.958mm
      - Width: 3.200 mm
      - Height: 3.999 mm
      - Wheelbase: 2.180 mm
      Weight
      - 15.500 kg
      Options
      - Insect suction section
      - incl. sonar height control
  • PLOEGER MKC-2TR SPINACH HARVESTER

      • Engine
        - Deutz 1015,6 cylinder water-cooled 223 kW output 1.900 r.p.m.
        Drive
        - Hydrostatic, 4-wheeldrive.
        Speeds
        - Field: 0 - 7 kph
        - On road: 0 - 25 kph
        Tyres
        - Front Michelin 1050mm
        - Rear Track
        Steering
        - Powered
        Capacity
        - Fueltank: 800 litres
        - Hydraulic-oil tank: 350 litres
        Dimensions
        - Length: 13.184 mm
        - Width: 3.664 mm
        - Height: 3.998 mm
        - Wheelbase: 1.906 mm
        Weight
        - 15.500 kg
        Options
        - Insect suction section
        - incl. sonar height control
  • PLOEGER MKC-4TR SPINACH HARVESTER

  • PLOEGER MKC-8 SPINACH HARVESTER

    • Engine
      - Turbocharged 6 cylinder diesel water-cooled; 223 kW output at 1900 r.p.m
      Drive
      - Fully hydrostatic 8-wheeldrive;
      - 4 driven axles: Crabwise
    • Steering
      - First, second and forth axle are steerable
      Hopper
      - Container carrier system
       
  • Carrot harvesters

  •  
  • PLOEGER WR-6B CARROT HARVESTER

  • Self propelled carrot harvester
    The WR 6B carrot harvester is a 6 row belt lifting harvester with a 17 m3 hopper running on 3 rubber tracks, 1 track in front in the centre under the belt lifting unit and 2 rear tracks for carrying the weight of the machine. An enormous cleaning capacity trough out the machine. Steering on all 3 tracks making the harvester easy to manoeuvre also in smaller fields.
      • Dimensions
        - Length 14.500 mm
        - Width 4.000 mm
        - Height 4.200 mm