| |
2
 |
 |
| I2 |
|
 |
Sweden |
PIAB | |
|
|
|
|
|
|
|
|
|
 |
|
|
|
|
|
|
|
|
|
| Show Screen |
|
|
|
|
| Offer Profile |
|
|
| PIAB’s customers can be found in a huge number of
industries, such as the packaging, automotive, food and pharmaceutical
industries, among manufacturers of electronics and white goods, at companies
specializing in handling with robots and woodworking, as well as in graphic
production, chemical industries and laboratories throughout the world. |
|
|
|
|
|
|
|
|
| Product Abstract |
|
|
 |
 |
 |
| Suction Cups |
Using suction cups is a lifting technique of many
possibilities. You can, for example, handle board materials or concrete slabs,
open bags, pick electronic components, label and hold objects. But different
applications need different requirements. PIAB offers one of the market’s widest
ranges of suction cups so that each application will have its own solution. You
are welcome to tell us about your needs. We are your partner whatever your needs
might be.
DURAFLEX® — for increased productivity and performance
Increase your productivity and security with DURAFLEX®, a strong and elastic
material with excellent sealing capability. High friction and reduced
micro-leakage increase the lifting capability and the cup’s outstanding wear
resistance extends the change-over intervals. PIAB’s unique dual-hardness cups
are ideally suited for applications where micro-leakage can occur, for example
when a suction cup does not properly conform to a handled material, such as
corrugated cardboard. Dual-hardness cups provide both the strength and
flexibility needed to seal on uneven or coarse surfaces. |
|
| Vacuum Pumps |
COAX® technology
PIAB's latest patented technology is an offshoot of the multi-stage ejector
principle.
COAX® ensures excellent performance at both low and high feed pressures – ideal
for situations where compressed air lines deliver air at low or fluctuating
pressures.
Pumps based on the COAX® technology can operate within the range of 0.17 to 0.60
MPa.Multi-stage ejector
PIAB vacuum pumps are of the multi-stage ejector type – a technology patented by
PIAB in 1973.
These vacuum pumps were developed to provide extra vacuum flow in combination
with deep maximum vacuum levels while keeping energy consumption at a minimum.
PIAB pumps have no moving parts that vibrate or wear out – important features
that contribute heavily to outstanding operational reliability and a pleasant,
noise-free working environment. |
|
| Vacuum Grippers |
| PIAB VGS™3010 – A new product design where high quality
DURAFLEX® suction cups are integrated with a patented COAX® cartridge based on
the latest COAX® technology. The result is a vacuum “gripper” that makes
selection, sizing and installation of a vacuum system easier, plus you will
enjoy the benefits of a more cost-efficient and reliable vacuum system.
Increase your productivity and reduce your costs with VGS™3010
- Faster response time
- Lower energy cost
- Higher operation reliability
- Easy selection and sizing — Knowledge about your specific vacuum flow,
level or volume requirements are not required. Only feed pressure and the
material being handled determine the optimal VGS™3010 for your application.
- Improved grip, lifting capacity and wear resistance with DURAFLEX® cups
— Provides up to 50% higher frictional grip as compared to conventional
cups.
|
|
 |
 |
 |
| Vacuum Conveyors |
Vacuum is used with great advantage in order to convey dry
powder products through dedicated pipe systems. PIAB's vacuum conveying systems
are built of strong components of high quality. Our objective is to offer
solutions that help our customers raise their productivity. Production of food,
pharmaceuticals and chemical products demands the highest possible degree of
safety as to hygiene and operation. PIAB's new series of vacuum conveyors has
been developed as an answer to the severe requirements of operational safety and
hygiene in the food, pharmaceutical and chemical industries.
The result of 25 years’ product development:
- All materials have received FDA approval
- Optimized design for the highest standards of hygiene
- Few moving parts for minimized maintenance
- Easy to dismantle and clean
- Modular construction for simple matching to your specific production
environment
- Even higher conveying capacity
- New, more efficient vacuum pump
- Higher degree of filtration due to larger filter area and new filter
materials
- Best possible traceability
- Grade AISI 316L stainless steel
|
|
| PIAB Vacuum & Blow System |
The PIAB Vacuum & Blow system has been developed to
increase the productivity and improve the working environment in the graphic
industry.
The system consists of three main components - the pump cabinet, the computer
software, and one or two hand-held remote controls. By pressing just a few
buttons you can set the exact level for suction and blowing. All functions can
be controlled individually from a central control unit or by remote control.
Energy consumption is reduced and production is speeded up considerably. The
settings for different types of paper are stored in the computer, whence they
can be extracted when it is time to reprint or perform a similar task. The
opportunity to use software to control the pumps provides maximum control and
precision. The cabinet also includes a manual emergency control unit. |
|
| Accessories |
Our line of monitoring and control units for vacuum
systems is unmatched when it comes to reliability. We focus on the overall
solution, down to the last detail. We are fully aware that top quality
components are as essential as designing pumps and suction cups that are in a
class apart. You will find everything you need to monitor and control vacuum
systems here.
Reliability, economy and accurate control/monitoring are the common
denominators. |
|
|
|
|
|
|
|
|
|
|
|
|
| |
3
|
|
I 
