Cable carrier, plastic, steel cable hose carrier, energy conduits

Cable Carrier Systems We supply steel, highgrade stainless steel and solid plastic cable carriers and plastic cable carriers with aluminium stays (Hybrid cable carriers), in standard sizes or tailormade to an individual customer’s requirements in millimetre units. Our scope of supply ranges from small units of only a few millimetres as for an inkjet printer to giant chains for oil platforms where the chain weighs several tonnes. With properties suited to all application situations, for example stable and robust, with fixed chain widths or variable widths, for long unsupported lengths and 3D applications. Particularly quiet and lightweight, in a covered design and quickly openable. Or for extreme conditions, for example heat-resistant or suitable for clean room environments.

BASIC-LINE/BASIC-LINE PLUS
	Solid plastic cable carriers with fixed chain widths - Economically priced solutions for standard applications - Types with fixed or openable brackets - Many types available immediately ex-stock world wide - Fast cable laying by simply pulling/pressing the cables in (PLUS)

MONO Cable carriers with simple design for standard applications Cost-effective cable carrier Simple and quick assembly Almost all types available immediately ex stock all around the world TÜV design approved in accordance with 2PfG 1036/10.97	QuickTrax Compact and cost-effective cable carriers with two-component technology Extremely fast and easy cable laying thanks to crossbar with film hinge Very quiet thanks to integrated noise damping system Stable chain construction Extensive unsupported length	UNIFLEX Advanced Light, quiet all-rounder with wide range of applications Cost-effective cable carrier Weight-optimized chain geometry Particularly high torsional rigidity	UNIFLEX Proven cable carrier with many opening and cover variants Cost-effective cable carrier Particularly high torsional rigidity TÜV design approved in accordance with 2PfG 1036/10.97	EasyTrax 0115 Extremely quick cable laying thanks to flexible lamella crossbars Cost-effective cable carrier Simple and quick assembly

EasyTrax 0320 Extremely quick cable laying, extra-stable thanks to two-component technology Very fast cable laying by simply pressing in the cables Very high utilization factor due to flexible crossbars swivelling in the direction of the carrier and not in the cable space Stable chain construction Extensive unsupported length	PROTUM Small, light cable carrier for unsupported applications Low vibration and quiet operation Optimal for short travel lengths and high travel speeds Gentle on the cables, since there is almost no polygon effect

VARIO-LINE
	Cable carriers with variable chain widths - Aluminium or plastic stays - Aluminium stays in 1 mm width sections are available - Inside and outside easy and quick to open - Light, robust or link-free series – a suitable solution for every application

K Series Cost-effective, robust cable carrier – also suitable for large additional loads TÜV design approved in accordance with 2PfG 1036/10.97	MASTER Series Quiet and weight-optimized cable carriers Low intrinsic weight Favorable ratio of inner to outer dimensions Standard bend radii, applicationspecific intermediate radii upon request Completely enclosed types, see MASTER TUBES	M Series Multivariable cable carrier with extensive accessories and stay variants TÜV design approved in accordance with 2PfG 1036/10.97	TKP-Series Easy to assemble, stable cable carriers with variable dimensions	XL Series Cable carrier with large inside height Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97

QUANTUM Cable carrier with large inside height Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97	TKR Cable carrier with large inside height Large dimensions Low intrinsic weight TÜV design approved in accordance with 2PfG 1036/10.97

TUBE SERIES
	Covered Cable Carriers - Covered cable and hose carriers with plastic or aluminium cover systems and completely enclosed carrier tubes - For protection of the cables for applications where chips or severe contamination occur

CoverTrax Extreme cable protection in harsh environmental conditions Outstanding protection for the cables Quick cable laying – inside and outside opening designs Very quiet thanks to internal noise damping system Extensive unsupported length	UNIFLEX TUBES Proven solid cable carriers with fixed chain widths Solid plastic Easy to open Robust, double stroke system for long unsupported lengths Particularly high torsional rigidity	MASTER TUBES Quiet and weight-optimized cable carriers Extremely quiet due to internal noise damping system Favorable ratio of inner to outer dimensions Standard bend radii, application specific intermediate radii upon request Variable pretension for many different applications possible	MT Series Multivariable cable carrier with extensive accessories Aluminium cover system in 1 mm width sections, plastic cover system in 8 or 16 mm width sections available Can be opened quickly on the inside and outside for cable laying Extremely robust due to stable plate construction Enclosed stroke system not sensitive to dirt/contamination	TKC-Serie Easy to assemble, stable cable carriers with variable dimensions Plastic covers available in 50 mm width sections Can be opened quickly on the inside and outside for cable laying Extremely robust due to stable plate construction Universal connectors (UMB) Many separation options for the cables Replaceable glide shoes for long service life for gliding applications

XLT Series Cable and hose carrier with large inside height Aluminium cover systems available in 1 mm width sections Large dimensions Can be opened quickly on the inside and outside for cable laying Highly wear-resistant, replaceable glide shoes available – resulting in minimal wear at high speeds, sliding in the guide channel	CONDUFLEX Closed designer cable carrier Attractive appearance owing to high-grade steel brackets and fiberglass reinforced polyamide frame Very well sealed design With protective straps ideal for hot chips Optimum protection for cables and hoses	MOBIFLEX Enclosed cable carrier with flexible metal helical tube Very well sealed design Ideal in case of hot metal chips Optimum protection for cables and hoses Unsupported thanks to the inserted, pre-tensioned steel band

ROBOTRAX
	Cable carriers for 3D movements - Ideal for use on jointed and swivel arm robots - Easy laying by simply pressing in the cables - With channel system, it is a universal solution for rotary applications

STEEL-LINE
	Steel cable carriers – solutions for extreme applications - Robust design for heavy mechanical loads - High additional loads and long unsupported lengths possible - Best suited for extreme and particular environmental influences – heat-resistant

LS/LSX Series Cost-effective steel chains with light design Improved dynamic characteristic values due to weight-optimized design Long unsupported lengths for small to medium additional loads Cover with steel band for protecting the cables is available on request	S/SX Series Extremely robust and stable steel chains Extremely robust and stable steel chains for heavy mechanical loads and harsh environmental conditions Very long unsupported lengths also for large additional loads Various types available in different dimensions Covers with aluminium cover system or steel strip possible for protection of the cables	CONDUFLEX Closed designer cable carrier Attractive appearance owing to high-grade steel brackets and fiberglass reinforced polyamide frame Very well sealed design With protective straps ideal for hot chips Optimum protection for cables and hoses	MOBIFLEX Enclosed cable carrier with flexible metal helical tube Very well sealed design Ideal in case of hot metal chips Optimum protection for cables and hoses Unsupported thanks to the inserted, pre-tensioned steel band

TOTALTRAX Turn-Key Systems
	Ready-to-assemble cable carrier system - One supplier and contact person for the complete system. - We develop, design and supply all components required for your individual cable & hose carrier system.



Accessories
	for cable carriers - Guide channels - Support trays - Strain relief devices

Guide channels Guide channels serve to provide operational safety for plastic cable carriers where there are long travel lengths.	Support trays A flat surface is required for the safe operation of the cable carrier. If this is not available on site, a support tray must be provided.	Strain relief devices The strain relief of the cables depends on the type of cable, the length of the cable carrier and the installation position.

Cables for Motion – cables for cable carriers. Durable – reliable – cost-effective We use our over 50 years of experience to continuously develop and refine the “insides“ – i.e. the Cables for Motion – and to constantly adapt them to the market requirements. Our cable ranges meet the highest quality standards in order to ensure availability of your systems and installations. With the Cables for Motion range, we offer a selection of cables which are cost-effective, flexible and extremely durable. A key factor for our cables is their tested and proven operational reliability, which meets all applicable standards and directives. Several hundred cable types, stored constantly in our cable warehouse, secure a fast availability all around the world. We deliver according to your requirements, no minimum quantities, each length without cutting costs.

PVC control cables Control 200 & Control 200 C Cost-effective standard control cables for a wide range of applications Self-supporting and gliding applications with normal load for average bend radii as well as speeds Black outer jacket for high UV-resistance, also suitable for outdoor applications; co-extruded ICC color code Identification based on DESINA color code simplifies the correct cable installation into the carrier	PVC control cables Control 400 & Control 400 C Control cables for more challenging applications Self-supporting and gliding applications with small bend radii and high speeds Black outer jacket for high UV-resistance, also suitable for outdoor applications; co-extruded ICC color code Identification based on DESINA color code simplifies the correct cable installation into the carrier	PUR control cables Control 700 & Control 700 C High-quality PUR control cables for even the most challenging applications Self-supporting and gliding applications with smallest bend radii and very high speeds; especially suitable for long travel lengths For indoor and outdoor applications Optimized bundle-stranding > 8 strands for highest availability Shielded design with continuous bending hi-flex braided shield

PVC power cables High-quality, robust PVC motor cables for challenging applications Self-supporting and gliding applications for small bend radii and high speeds Particularly suitable for long travel lengths Suitable for indoor and outdoor applications High wear-resistant and robust outer jacket	PUR power cables High-quality, robust PUR motor cables for even the most challenging applications Self-supporting and gliding applications for very small bend radii and very high speeds Particularly suitable for long travel lengths For indoor and outdoor applications High wear-resistant and nick-resistant outer jacket Individual strands with double-jacket Shielded design with continuous bending hi-flex braided shield	PUR data cables Super-flexible, continuous bending hi-flex and robust PUR data cables; i = with inner jacket Pair-stranding cabling and complete shielding – suitable for critical EMC environments For universal and extremely challenging applications in cable carriers For self-supporting and very long gliding applications with small bend radii Particularly suitable for high speeds and accelerations Double shielded CD version

BUS-/LWL-/Coaxial cables Super-flexible, continuous bending hi-flex and robust PUR-BUS-/Koax-/LWL cables For universal and extremely challenging applications in cable carriers For self-supporting and long gliding applications with small bend radii	PUR system cables High-quality PUR combi-cables for challenging system applications Self-supporting and gliding applications for small bend radii and high speeds For indoor and outdoor applications AReliable transmission according to SIEMENS-, INDRAMAT, Heidenhain or Baumüller specifications	Pre-assembled cables You need connection-ready harnessed bus cables? Or harnessed signal- or power cables for drives – in accordance to SIEMENS specifications? Connection-ready harnessed cables: easy to order with just order number and cable length based on SIEMENS specifications Just-in-time delivery of three work days no minimum order quantities individual cable lengths without surcharge checked and monitored for reliable connection

TOTALTRAX Turn-Key Systems - Ready-to-assemble cable carrier system You know what product you need – we supply it to you completely harnessed One supplier and contact person for the complete system. We develop, design and supply all components required for your individual cable & hose carrier system. Everything from a single source Consulting Planning Design Cable carriers Electrical cables Complete guarantee Hydraulic hoses Pneumatic hoses Plug-and-socket connectors Assembly plates Complete assembly of all components



Conveyor systems Reliability and experience based on tradition Our scraper belt, hinged belt and belt conveyors embody more than 30 years of experience. Systematic further development of our products and adaptation of their functions for use with the latest generation of machines guarantees you the utmost level of reliability.

Hinged belt conveyors Proven for a wide range of disposal tasks Structure Stable metal plate construction Standardized housing cross-section with variable width Robust worm gear motor with torque switching Customized discharge height Customized incline standards = 30°, 45° and 60° Floor mounting or as a push-in version into the machine base Transportation of the material takes place on the upper trough of a revolving hinged belt. Drivers ensure transport of the material up the inclined section. For wet machining the cooling lubrications are collected in the conveyor housing and can be fed back into the machine circuit via an optionally available coolant container or a pump station. Our hinged belt conveyors can be used either as stand-alone conveyors at machine tools, or as linked conveyor systems. Depending on the design, the material to be conveyed is brought to the required height at a defined incline and then discharged.	Scraper conveyors For disposal of small materials Structure Stable metal plate construction Standardized housing cross-section with variable width Robust worm gear motor with torque switching Customized discharge height Customized incline standards = 30°, 45° and 60° Floor mounting or as a push-in version into the machine bas Transport of the material takes place via drivers which push the material along the floor of the housing towards the discharge. Cooling lubricants are collected in the conveyor housing and can be fed back into the machine circuit via an added-on container or a pumping unit. Our scraper conveyors can be used as stand-alone conveyors at machine tools or as linked conveyor systems. Depending on the design, the material to be conveyed is brought to the required height at a defined incline and then discharged.	Belt conveyors The all-rounders – also for parts with sharp edges Structure Housing made of steel plate Oil-resistant belt Protective motor switch Convex return shafts Shafts with ball bearings Adjustable belt tension Our belt conveyors are predominantly used on punch-nibbling machines, for transporting punching scrap and punching trimmings. However, other parts can also be transported, such as waste parts from plastic injection machines. The transport belt of the conveyor is resistant to oil and grease.

EXPO21XX Online Trade Fair		Navigation : EXPO21XX.com > MICROELECTRONICS 21XX > Communication > KABELSCHLEPP