|
New Items
|
|
|
|
|
 |
Bluetooth® ETHERNET Gateway – Wireless Transmission of
ETHERNET Protocols
Bluetooth® technology is capable of replacing wired
transmission systems wherever they are difficult or even impossible to
implement (e.g., in slip ring applications, mobile drive or high-bay storage
systems). A Bluetooth® ETHERNET Gateway (758-915) joins the range of WAGO
automation products.
|
|
|
|
New PROFIsafe Modules with iPar Functionality
WAGO has expanded its WAGO-I/O-SYSTEM to include three
new PROFIsafe modules (V2) with iPar functionality. These modules simplify
the setting and configuration of safety-oriented functionalities.
|
|
|
|
|
|
More Functional Safety for the WAGO-I/O-SYSTEM
Further I/O modules for PROFIBUS and PROFINET have been
added to the WAGO-I/O SYSTEM 750/753. Potential-free emergency stop buttons
with contacts, safety interlock switches, operating mode switches, safety
sensors and semiconductor outputs can be connected via the 4 and 8-channel
PROFIsafe-V2 iPar input module.
|
|
|
|
Compakt: New I/O-Link Master Module
Increasingly complex products, manufacturing flexibility
and high demands on quality assurance require intelligent, configurable and
programmable sensors. IO-Link now elegantly standardizes the required,
varying interfaces for connecting to a control system and tooling.
|
|
|
|
|
|
AS Interface Master from WAGO – Now Available as M4 V
3.0
With this latest software release the AS Interface Master
from WAGO is provided with full master functionality, along with other
additional functions, in an I/O module that is a mere 12mm wide. The
automatic integration function of AS Interface slaves permits rapid planning
and configuration without any additional aids (software tool, addressing
unit).
|
|
|
|
EPSITRON® PRO Power: New 12V and 48V Power Supplies with
Extra Power
The EPSITRON® PRO Power Supply Series from WAGO has been
expanded to include power supplies in 12 and 48VDC outputs. Both single- and
three-phase power supplies with short extra power via TopBoost and
PowerBoost are available for 12, 24 and 48V output voltages.
|
|
|
|
|
|
ProServe® Goes SQL
Higher availability, better performance and improved
network capability - ProServe® version 6.0 offers it all by moving from
Access to SQL. Of course, old projects can be imported and further
processed.
|
|
|
|
Easy Connection for Power Electronics
The 2706 and 2716 Series terminal strips have a
low-profile design without compromising on convenience. Operating levers
allow the 2706 and 2716 Series to be wired even faster, easier and safer
than standard terminal strips. Furthermore, solid conductors can be
terminated very conveniently using the levers.
|
|
|
|
|
|
"Fingernail-Sized" SMD Terminal Block for PCBs
Interconnecting several LEDs (e.g., lights or indicators)
via PCBs requires low-profile terminal blocks to prevent shadowing.
Fingernail-sized terminal blocks of just 4.5mm height have been designed by
WAGO to meet this requirement.
|
|
|
|
Universal Frequency and Current Transducers
WAGO is expending its Series of JUMPFLEX® Transducers to
include both universal frequency and current transducers. The 857-500
Frequency Transducer converts signals from, e.g., NAMUR, NPN or PNP sensors
into analog standard signals. The 857-550 Current Transducer measures DC and
AC currents ranging from 0 to 1A (AC/DC) and from 0 to 5A (AC/DC).
|
|
|
|
|
|
ETHERNET Controller 2.0 - Designed for the World of
Automation
WAGO offers the 2nd generation ETHERNET Controller in
three versions. One major difference is a larger memory for the 750-880 and
750-881 Controllers. Additionally, the 750-880 has a slot for SD memory
cards. A complete novelty is the 750-882 with media redundancy capability.
The controller operates in two separate networks and is accessible via two
different IP addresses.
|
|
|
|
picoMAX® Connectors
The revolutionary picoMAX® socket technology makes double
use of the contact force of one single CrNi steel spring: For clamping of
the conductor and for making electrical contact to the connector pin. Its
compact design reduces the "overall length" of the picoMAX® female
connectors, allowing a completely new generation of corresponding male
connectors to be created with completely new features.
|
|
|
|
|
|
WINSTA-Linect® - Easy plug-in connection of lighting
fixtures
Lights are offered under the Linect brand name that
enable both conventional field connection and connection with plug-in
connectors. The Linect interface can be used by all lighting manufacturers
worldwide. This way, lights with the Linect logo can be connected to all
Linect-marked plug connectors - regardless of the manufacturer!
|
|
|
|
WAGO 2273 Series: Small is Big
The best socket modules ever developed. The new "WAGO" is
more than 50% smaller than the original 273 Series. Safe, secure and
error-free connection of solid conductors is guaranteed by the transparent
enclosure.
|
|
|
|
Rail-mounted terminal blocks and rail-mounted terminal
block systems
|
|
|
|
|
|
TOPJOB® S Rail-Mounted Terminal Blocks
A range of rail-mounted terminal blocks for all
industrial and Exe applications as well as building installation. All
terminal blocks with CAGE CLAMP® S connection.
|
|
|
|
Front-Entry Rail-Mounted Terminal Blocks
With CAGE CLAMP® connection. Through, ground (earth)
conductor and shield (screen) terminal blocks, angled and horizontal type.
Distribution, high-current and multilevel terminal blocks.
|
|
|
|
|
|
Compact Rail-Mounted Terminal Blocks
Compact and versatile, with CAGE CLAMP® connection.
Through and ground (earth) conductor terminal blocks for DIN 35 and DIN 15
rails. Double potential terminal blocks, multilevel rail-mounted terminal
blocks.
|
|
|
|
MINI Modular terminals
When space it at a premium, with CAGE CLAMP® connection.
Feed-through and PE terminals for TS 35 and TS 15.
|
|
|
|
|
|
TOPJOB® Classic Rail-mounted Terminal Blocks
Provide order, neatness and maintenance-friendliness in
the distribution panel. With CAGE CLAMP® connection. Through, ground
conductor and N-conductor disconnect terminal blocks. Power distribution
disconnect and screen terminal blocks
Multilevel installation terminal blocks.
|
|
|
|
Side-Entry Rail-Mounted Terminal Blocks
With CAGE CLAMP® connection. Through and ground (earth)
conductor terminal blocks. High-current terminal blocks up to 95 mm˛.
|
|
|
|
|
|
Rail-mounted Terminal Blocks with IDC Connection
The perfect combination of connecting technologies:
Rail-mounted terminal blocks with FIT CLAMP connection for factory wiring
and CAGE CLAMP® connection for field-wiring.
|
|
|
|
X-COM®-SYSTEM
Synthesis from modular terminals and plug-in connectors
with CAGE CLAMP® connection. The X-COM-SYSTEM® is the perfect solution for
switchgear and control engineering.
|
|
|
|
|
|
Modular terminal blocks and terminal strips for surface
mounting
For specific or universal connection tasks: device
connectors, modular terminal blocks and terminal strips, lighting
connectors, connectors and push-wire connectors for junction boxes.
|
|
|
|
Routing systems
Routing systems and terminal blocks for busbars with CAGE
CLAMP® connection: dual feed-through terminals, routing honeycombs,
potential blocks, routing and potential terminals.
|
|
|
|
|
|
Screen connection system
Provides a high degree of mechanical and electrical
safety at ultra-flexible application options.
|
|
|
|
EEx e II and EEx i modular terminals
For application in potentially explosive areas "EEx e II"
and intrinsically safe circuits "EEx i".
|
|
|
|
|
|
Function terminals
With CAGE CLAMP® connection. Disconnect and test
terminals, PE disconnect terminals, safety terminals and plugs. Initiator
and actuator terminals, diode terminals.
|
|
|
|
|
|
|
|
PCB Terminal Blocks and Connectors
|
|
|
|
|
|
PCB Terminal blocks
Greatest diversity from the technology leader! WAGO
offers a comprehensive program of PCB terminal blocks for the connection of
PCBs in your device environment.
|
|
|
|
Pluggable PCB terminals
Series-capable socket terminals, plug-in connectors for
EIB bus coupler and MICRO connecting terminals for EIB applications, 2-wire
socket terminal blocks. With plug-in clamp connector.
|
|
|
|
|
|
picoMAX® Connection System for PCBs
WAGO engineers set out to challenge established
technologies. Innovation and determination have enabled them to change
wiring with a radically new electrical connection design.
|
|
|
|
Feed-through terminals
Feed-through terminals and terminal strips with CAGE
CLAMP® connection. For PCBs as frontplate feed-through for external
conductor connection.
|
|
|
|
|
|
The Whole Range of PCB Components for THR Soldering
Reflow soldering is the standard method for soldering
SMD components
|
|
|
|
PCB plug-in connectors
Pluggable wiring of function modules with the WAGO MULTI
CONNECTOR SYSTEM MICRO, MINI, MIDI with CAGE CLAMP® connector.
|
|
|
|
|
|
X-COM® PCB plug-in connectors
Synthesis from PCB terminals and plug-in connectors with
CAGE CLAMP® connection. For the safe integration of PCB modules in the
system wiring.
|
|
|
|
WINSTA® PCB plug-in connectors
Perfectly plugged-in, even on the PCB. For a simple
connection of electronic modules in the building installation. Direct
plugging of single-wire conductors with the CAGE CLAMP® S connector.
|
|
|
|
|
|
Connectors for Special Applications
Tapping plug-in connector with blade-type / CAGE CLAMP®
connector, for e.g. elevator engineering. 10- and 20-pole plug-in connection
with CAGE CLAMP® connector for e.g. withdrawable units.
|
|
|
|
|
|
|
|
Terminal Blocks and Connectors
|
|
|
|
|
|
Power supply terminals
The 294 Series and 294 Linect® are power supply terminals
used for connecting lighting fixtures and other devices. These terminals can
be used anywhere in the world and accommodate solid, stranded and
fine-stranded conductors.
|
|
|
|
Lighting connectors
Due to their testing and approval as isolated Compact
Connectorss per VDE 0606, the lighting connectors of the Series 224 can be
used in applications where a connection between solid and flexible
conductors is required.
|
|
|
|
|
|
Block terminals
Device connecting terminals with CAGE CLAMP® S for a
cost-minimizingconnection of electrical devices. Series-capable individual
terminals with CAGE CLAMP® connector and fixing flanges, compact block
terminal strips with CAGE CLAMP® COMPACT-connector.
|
|
|
|
Connectors
WAGO push-wire connectors for junction boxes, compact
connectors for flexible conductors, connectors for EIB bus couplers.
|
|
|
|
|
|
Ballast devices and capacitor terminals
WAGO o0ffers a number of individual variants of ballast
devices and capacitor terminals. A tailor-made solution will be available
upon request.
|
|
|
|
PCB terminals for electronic ballast devices
With plug-in connection. Series-capable individual
terminals and terminal strips for PCBs. Terminal blocks for PCBs,
combination PCB terminal blocks.
|
|
|
|
|
|
Plug-in connectors for rail lighting
Plug-in connector system and plug-in connectors with
phase selection for rail lighting. Blade-type connector (IDC) for the
feed-through wiring and plug-in connector for lighting load circuit.
|
|
|
|
WINSTA® plug-in connectors for building installation
WINSTA® - the name is the program. Until now, the WINSTA®
plug-in connector program for the building installation consisted of 3- to
5-pole plug and socket modules ...
|
|
|
|
Components for Automation
|
|
|
|
|
|
WAGO-I/O-SYSTEM 750
Modular system. The WAGO-I/O-SYSTEM 750 is the
most compact, modular and fieldbus-independent I/O system for decentralized
automation.
|
|
|
|
WAGO-I/O-SYSTEM 753
Bus terminals with pluggable wiring level. For
certain applications, a pre-wiring of components is the sensible solution,
independent from the electronics.
|
|
|
|
|
|
The module for difficult conditions.
The module for difficult conditions.Consequently
executed decentralized automation ends closely at the machine - frequently
so close that there is no room for a protective cabinet or enclosure. WAGO-I/O-SYSTEM
755 was designed for those conditions..
|
|
|
|
WAGO-I/O-SYSTEM 757
Sensor/actuator Boxes. IP67 fieldbus technology
may not have sufficient flexibility and rentability for every application,
to justify a change from IP 20 to IP67 automation. Our smart IP20/IP67
solutions are your alternative.
|
|
|
|
|
|
WAGO-I/O-SYSTEM 758
WAGO-I/O-IPC, compact industrial PC. The IPC is an
affordable compact industrial PC for realtime control applications. Despite
its compact design, the IPC comprehends all standard PC functions, including
network or fieldbus interfaces for local and remote expansion.
|
|
|
|
WAGO-I/O-SYSTEM 759
Software. Maintenance and programming software and
WAGO TOPLON® for building automation..
|
|
|
|
|
|
WAGO-SPEEDWAY 767
A new height of performance. Perfection in all
details. WAGO-SPEEDWAY 767 - the new performance class for switchboard-less
automation.
|
|
|
|
PERSPECTO – Monitors and Panels
|
|
|
|
|
|
Condition Monitoring
Look-ahead maintenance enhances productivity and saves
costs.
|
|
|
|
Interface modules
Separation of wiring and function level. Relays,
optocouplers, temperature transducers, current flow monitoring and other
function modules.
|
|
|
|
|
|
Overvoltage protection
Enhance reliability. Used to protect other
electrical equipment and systems against excess overvoltage and to generate
equipotential bonding.
|
|
|
|
Power supplies
Big Power. Primary cycled power supplies, constant
voltage sources, power supply units, overvoltage module. Rail-mounted types
available..
|
|
|
|
|
|
Empty plugs and empty enclosures
Individuality. For the individual mounting on base
terminal blocks, as modular terminal or built-in device. Mounting feet and
bases for PCB rail-mounting available.
|
|
|
|
|
A 
