Series: K2.. 56 to 355
Output range: 0.06 kW to 500 kW
Speeds: 3,000, 1,500, 1,000, 750, 600, 500 rpm , lower speeds on request, pole-changeable versions available with many speed combinations, e.g. with Dahlander winding 4-2, 8-4, 12-6 pole or 6-4, 8-2, 8-6 and 12-4 pole with two separate windings, three speeds such as 8-4-2 or 8-6-4 or four speeds 12-8-6-4 pole

Series: Series W.1R 56 to 315 Efficiency classes according to CEMEP (EFF1), IEC 60034-30 (IE2) or EPAct; Efficiency determination complying with
EN 60034-2(-1) or IEEE 112
Output range: 0.06 kW to 335 kW
Speeds: 3,000; 1,500; 1,000; 750 rpm

Series: K... 56 to 315
Output range: 0.06 kW to 315kW
Speeds: 3,000; 1,500; 1,000; 750 rpm
Types of protection: "Increased safety" EEx e II 2G, "flameproof" EEx d/de II 2G, "non sparking" EEx nA II 3G, use in zone 21, II 2D, use in zone 22, II 3D

Series: A2../ARC 112 to 355, for frequency converter operation, ARB 22 to 65, heavy version for mains operation
Output range: 0.4 kW to 500 kW (ARB series from 0.4 to 5.5)
Acceleration torques: 40 Nm to 3,000 Nm
Speeds: 3,000; 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request

Series: B... 63 to 355
Output range: 0.12 kW to 500 kW, higher output ratings available on request
Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request
Brake types: Lenze BFK458, KEB .08.210, Mayr 800.410.3, Stromag BZFM

Series: K... 63 bis 355
Output range: 0.12 kW bis 440 kW
Speeds: 3,000; 1,500; 1,000; 750 rpm, pole-changeable versions available on request

Series: K2.. 90 to 355
Output range: 0.25 kW to 500 kW
Class: 3,000; 1,500; 1,000; 750 rpm, lower speeds and pole-changeable versions on request

Slip ring motors: S..R 132 to 315, duty S1, continuous operation S..H 132 to 315, duty S3, intermittent duty
Output range: 2.2 kW to 315 kW
Speeds: 3,000; 1,500; 1,000; 750; 600; 500; 375 rpm

Series: K2.. 63 to 355, duty S3 (intermittent periodic duty 25/40/60/ operating factor 100%) K2.O 56 to 355, cooling method IC 410 K2.F 63 to 355, cooling method IC 416
Output range: 0.06 kW to 500 kW
Speeds: 3,000; 1,500; 1,000; 750; 600; 500 rpm , lower speeds available on request

Frame size: 0.06 kW up to 2.2 kW
Number of pole: two and four pole
Types: EB21R / EB20R; EB21RW / EB20RW; ED21R / ED20R

Series: K21B, K23B, 225 to 315
Output range: 37 to 355 kW, 2- and 4 pole 30 to 240 kW, 6- pole

VEM offers for motors in shaft heights 315 and 355 mm, to fit them with RFID Transponders as an Memory-Motor. In the memory chips of thes transponders (TAGs), not only nameplate data, but also additional technical data for built-on components, selected spare parts and maintenance data, and, if requested, customer or user data are stored. Moreover, there is the possibility to actively record a maintenance history.

Series: DKC..., DKR..., DKK..., DKA...
Output range: 200 kW to 22,500 kW
Voltage: 6 kV, 10 kV, other voltages on request
Speeds: 3,000; 1,500; 1,000; 750; 600; 500; 375 rpm, other speeds on request
Cooling methods: IC 01/IC 0 A 1, internal/open-circuit cooling
IC 611, closed-circuit cooling (air-to-air heat exchanger),
IC 8 A1 W7, air-to-water heat exchanger,
IC 411 ventilated

Series: DSR..., DSK..., DSA...
Output range: 200 kW to 14,000 kW
Voltage: 6,000 V; 10,000 V
Speeds: 3,000, 1,500, 1,000, 750, 600, 500, 375 rpm, other speeds on request
Cooling methods: IC 01, self-ventilation, IC 3 A7, forced cooling, IC 611, closed-circuit cooling (air-to-air heat exchanger), IC 8 A1 W7, air-to-water cooling

Series: DT...
Output range: 560 kW to 28,000 kW
Voltage: 6kV, 10kV
Speeds: 1,500; 1,000; 750; 600; 500 rpm, other speed ranges on request
Cooling methods: IC 01, open-circuit cooling / IC 0 A 1, IC 8 A1 W7, air-to-water heat exchanger

Series: G2.. 132 bis 355
Output range: 4.3 kVA bis 500 kVA
Speeds: 1,500; 1,000; 750; 600; 500 rpm, lower speeds available on request

Series: DAS...DAK,.....DAA
Output range: 1,500 kVA to 6,000 kVA
Voltage: 690 V; 950 V; 3,300 V
Speeds: 800 to 2,200 rpm, other speeds on request
Cooling methods: IC 3 A7, forced ventilation, IC 611, closed-circuit ventilation (air-to-air heat exchanger), IC 8 A1 W7 air-to-water cooling

Series: DR..., DG...
Output range: 1,000 kVA bis 28,000 kVA
Voltage: 6.3 kV; 10.5 kV
Speeds: 1,500; 1,000; 750; 600; 500; 375 rpm
Cooling methods: IC 01, open-circuit cooling / IC 0 A 1, IC 8 A1 W7, air-to-water heat exchanger

Series: M21R 80T to 132T
M21R 132 to 180 VS
Output range: 0.55 to 7.5 kW (M21... T)
7.5 to 22 kW (M21... VS)
Frequency setting range: 0 to 132 Hz (M21... T)
0 to 100 Hz (M21... VS)

Series: MSF-017 to MSF-1,400
Current range: 17 A to 1,400 A
Mains voltages: 200 - 690 V
Mains frequency: 50/60 Hz

Series: CF23-05 to CF23-15 CF40-003
to CF40-026
Output range: 0.37 kW to 2.2 kW (CF23) 0.75 kW to 7.5 kW (CF40)
Mains voltages: 230 VAC 1~/3~ (180 - 264 VAC),
400 VAC (342 - 506 VAC
Mains frequency: 50/60 Hz
Output frequency: 0.1 ... 400 Hz,

Series: DAS...
Output range: 1,500 kVA ... 6,000 kVA
Voltage: 690 V; 950 V; 3,300 V
Speeds: 800 to 2,200 rpm; other speed ranges on request
Cooling methods: IC 3 A7, forced-ventilated,IC 611, closed-circuit ventilation (air-to-air heat exchanger)IC 8 A1 W7, air-to-water cooling

Series: DKABZ...; DKCBZ...; DKLBZ...; DKVBZ...; DKWBZ....
Output range: 40 kW ... 1,600 kW
Voltage: up to 3,000 V
Speeds: up to 6,000 rpm
Cooling methods: IC 0 A1 self-ventilated – open-circuit cooling, IC 3 A7 forced-ventilated – open-circuit cooling, IC 4 A1 A1 self-ventilated – surface cooling, IC 4 A1 A6 forced-ventilated – surface cooling with externally mounted fan, IC 8 water-jacket cooling

Series: DREBZ...; DRLBZ...
Output range: 30 kVA ... 3,000 kVA
Voltage: 400 V ... 1,800 V
Speeds: 1,000 ... 2,100 rpm
Cooling methods: IC 0 A1 self-ventilated – open-circuit coolingIC 3 A7 forced-ventilated – open-ciruit cooling

Since they were established, our companies have been supplying electric drives for plant construction. We have acquired considerable experience from these many years of cooperation with our customers, and this experience has been reflected in our products.

Increasing mechanisation has resulted in the more frequent use of electric drives. Especially in the field of mechanical engineering, the motors used are adapted to suit the design of the plant and machinery. VEM supplies a wide range of specialist motors, from built-in motors to brake motors and energy-saving motors.

Our highly-skilled and motivated workforce, combined with our many years' experience in developing and building electrical machines for mechanical engineering, are your guarantee for a reliable, cost-effective product. It also means we can supply custom drives designed for specific applications.

VEM manufacturing sites are located in close proximity to some of Germany’s major chemical plants, with the result that the chemical and petrochemical industries have long been important markets for VEM drives. Because they are used in hazardous environments, special requirements apply to drives for compressors, blowers, pumps and extruders. Using frequency converters to regulate speed is consequently of ever-greater importance.

VEM supplies drives to the steel and non-ferrous metal industry for rolling stands, shears and coilers which comply with the highest standards, such as those contained in the SEB (Stahl-Eisen-Betriebsblatt) guidelines for rolling mill motors of the Verein Deutscher Eisenhüttenleute VDEh.

If energy and environmental engineering is to live up to its name, it requires the use of environmentally-friendly and energy-efficient electrical machines. We have considerable expertise in manufacturing motors. Our companies have from the outset produced drives for pumps and fans, and continue to do so.

VEM generators for wind power plants are constructed as double-fed asynchronous generators whose stator winding is connected directly to the grid. The rotor is connected to the same grid via a converter. This combination makes operation possible at variable speeds and outputs yet constant stator voltage and frequency.

VEM delivers its products to renowned system providers with years of experience in outfittings ships. The providers size the electric drive technology and automation solutions for entire ships, working together with the best shipyards in Europe, Asia and the Americas.
Shared success is based on a high-performance partner like VEM, its products being individually engineered for shipbuilding purposes and manufactured in strict accordance with current classification regulations.

VEM has been developing and manufacturing traction machines for more than a century. We believe that this treasure-house of practical experience, together with our team of highly-qualified specialists and state-of-the-art production facilities, equipes us well to be an able, forward-looking partner for the railway vehicle industry.

Over the last few years, VEM Sachsenwerk GmbH has grown to become one of the leading manufacturers of electrical machinery in Germany. Our considerable expertise is rooted in our generations of experience in the construction of large and special machines. For you as a customer, it is a guarantee of the competitiveness and international success of our product range, from asynchronous motors to synchronous generators. From the point of view of our customers - operators of expensive plant and machinery - the No. 1 priority of our after-sales sector is to offer the best possible service.