|
Motors
Servo motors, stepper motors or special motors: JAT
offers you the appropriate drive solution in the power range up to 2,5 kW.
|
|
|
|
Multi-pole rotary Servo Motors: ECOSTEP®
The encoder commutated multi-pole synchronous motor is at
its economical design as a hybrid stepper motor with encoder a low-budget
servo drive system that makes motion control available to many new
applications. The ECOSTEP®-range offers:
- Low losses referring to the torque and
dimension below 1000 rpm
- Effective stall torques from 0.1 - 15 Nm
- Flange dimensions of 42, 56, 86, and 110 mm
- Motors with applicable holding brakes from 0.5 - 5 Nm
- Mechanical options, e.g. gears and keyways
- Positioning resolution from 8,000 PPR to 160,000 -PPR
- Suitable as direct drive cause to damped internal resonance
|
 |
Low-pole rotatary Servo Motors: ECOSPEED
... the classics among the servo motors:
- Torque from 1 - 26 Nm
- Available with incremental encoder and absolute value encoder *
- Holding brakes from 1 - 10 Nm (optional) *
- Explosion-proof according to ATEX (optional) *
- Approvals: UL/CSA, CE *
*) depending on series
|
|
Direct Linear Servo Motors: ECOLIN®
Two- or three-phase directlinear - master of gantry and
cogging. For driving sharp-contoured and with small following error these
motors are really worth a try. The following features are available:
- Ironcore or ironless
- Standard motors switched in series (gantry)
- Peak forces from 150 up to 1650 N
- Available with complete precision mechanical system including a
measurement device (option)
- Servo amplifiers: ECOLIN® or ECOVARIO®
|
|
|
|
Low-pole rotatory ATEX Servo Motors
Servo motors
certified according to ATEX directive 94/9/EG:
- according to equipment group II, category 2G,
- temperature class T4 (135 °C)
- flameproof enclosure protection „d“
- explosion group IIB
- suitable for use in zones 1 and 2 (U.S.A. zone 1)
- fulfil the demands of EN 60079-0 and EN 60079-1
|
|
Stepper Motors
Features:
- 2-phase DC stepper motors, torque range
0.24 to 1.6 Nm (Max. holding torque)
- Step angle: 1.8°
- Rated supply voltage: 24 ... 60 V
- appropriate stepper motor amplifier: ECOSTEP54 for 4 motors
|
|
2-Phase Synchronous Hollow-Shaft Built-in Motor ES
Features:
- Encoder-commutated 2-phase brushless
synchronous motor
- Hole diameter in accordance to customer requirements
- Direct drive without coupling, without gear
- Direct drive free from backlash, without hysteresis
- Commutation and feedback control of the drive via motor encoder or linear
measuring system
- Servo amplifier: ECOSTEP®200
|
|
|
|
Compact Servo Drives
Motion Control directly at the machine.
|
|
|
|
Compact Servo Drive: ECOMPACT
Compared to a solution with servo amplifiers located in a
central cabinet, decentral compact servo drives offer some advantages:
- Lower cabeling effort
- Smaller cabinet
- Minimizing of error sources
- Commissioning is faster and more simple
- Lower price because of integration
ECOMPACT is based on our well-proven ECOSTEP motors series 23S. ECOMPACT
features digital current, speed, and position control. Comprehensive motion
control functionality is integrated. Parameterization and setpoint setting
via CANopen.
|
|
|
|
|
|
|
|
Amplifiers
JAT servo amplifiers and JAT stepper motor amplifiers.
|
|
|
|
ECOSTEP®/ECOLIN® Servo Amplifiers
- Compact servo amplifiers
for the complete motor range
- Operation of 2-phase brushless synchronous motors, 2-phase synchronous
linear motors, brushed DC servo motors, stepper motors
- Torque, force, speed, and positioning control
- Uniform control interface over the complete product range
- Field bus connection via CAN, Profibus DP, or RS 485
- RS232 interface
- In conformity with CANopen DS402 standard
- Programmable digital inputs and outputs
- Second encoder input for load feedback or setpoint
- Analogue setpoint input
- Automatic driving of holding brake
- Separated logic and power supply
- DC supply from 24 VDC
- Interpolation via CANopen
|
|
ECOVARIO® Servo Amplifiers
- Compact servo amplifiers
for the complete motor range
- Torque, force, speed, and positioning control
- Operation of 2- or 3-phase brushless synchronous motors and synchronous
linear motors
- AC or DC power supply
- Uniform control interface over the complete product range
- Field bus connection via CAN, Profibus DP, RS 485 or Ethernet
- RS232 interface
- In conformity with CANopen DS402 standard
- Programmable digital inputs and outputs
- 2 encoder interfaces (RS422, SINCOS, SSI, BISS®, EnDat®, HIPERFACE®)
- Analogue setpoint input
- Automatic driving of holding brake
- Separated logic and power supply
- Interpolation via CANopen
|
|
2-Axes Servo Amplifiers ECOVARIO® MiniDual
- Single-PCB solution for
integration on customer side
- Dimensions: 100 x 120 mm
- Digital torque, force, speed, and positioning control
- Operation of 2-phase synchronous servo motors, DC motors, stepper motors,
voice coil actuators
- Max. output power: 2 x 0.45 kW
- DC supply voltage: 24 V ... 60 V
- Field bus connection via CANopen®
- RS232 parameterization interface
- Programmable digital inputs and outputs
- Automatic driving of holding brake
- Interpolation via CANopen®
|
|
|
|
ECOSTEP54 Stepper Motor Amplifier
- 4 axes motion control for
2-phase stepper motors
- Microstep resolution 12800 steps/rev
- Programmable phase current up to 2.5 A
- Separate logic and power supply
- 8 opto-coupled digital inputs and outputs
- 4 analogue inputs 0 ... 5 V, 10 bit
- 1 analogue output +/- 10 V, 8 bit
- Internal relay for switching off DC link
- Logic supply: 10 ... 30 VDC
- Power supply: 20 ... 45 VDC
- Control of a holding brake for each axis
- Parameterization and setpoint setting via RS232 or CANopen
- Compact controller in metal housing
|
|
ECO Studio - Commissioning in no time
ECO Studio is part of the new software package ECOSUITE
and provides convenient user interfaces for commissioning and
parameterization of our drives.
ECO Studio provides the following features:
- Parameterization of the servo amplifier
families ECOSTEP and ECOVARIO, the compact servo drives ECOMPACT, and the
stepper motor amplifiers ECOSTEP54
- Configuration of all parameters via PC
- Display of operation values
- Commissioning supported by wizards
- Explorer-like tree structure for easy menu guidance
- Oscilloscope function
- Loading and saving of parameter sets
- Offline parameterization
- Sequence programming
- Online help system
|
|
Accessories
Power supplies, transformers, software tools
|
|
|
|
Mechatronical Systems
From linear axes via XY tables to multi-axes systems:
Complete, integratable sub systems for highest dynamic and precision.
|
|
|
|
Single Axis Systems
• Precision Linear Axes / Series PLA or PLT
• Linear Axis with Linear Motor / Series LA-107
• Linear Axis with Linear Motor / Series LA-110
• Linear Axis with Linear Motor / Series LA-205
|
|
Two Axes Systems
• Flat Bridge, also as Gantry System
• Flat Bridge with Clearance
• Flat Bridge with Spindle Drive
• X-Y Precision Table, X-Y Linear Motor Table
|
|
Three Axes Systems
• X-Y Table with rotational Axes
• Handling System X, Y, Z
|
|
|
|
Multiaxes Systems
• Handling System with 5 Axes
• Handling System with 8 Axes
|
|
Rotary Systems
• Hollow-Shaft Rotary Table HRT-100
• Hollow-Shaft Rotary Table HRT-190
• Rotary Table with Clearance
|
|
|
|
|
|
Applications
If AC-servos and stepping motors give up - Examples
when and where the ECOSTEP® and ECOVARIO® can be used as energy saving, cost
reducing or pulse time increasing drive.
|
I 
