| Mini-Motors,
Micro-Motors, Actuators, Motion Control and Drives |
|
 |
 |
 |
| Brushless DC Motors |
Diameter: 15 to 31 mm
Length: 25 to 53 mm
Starting Torque: 4.1 to 50 mNm
Speed Range: 5200 to 16300 rpm
- Brushless motors are electronically commutated and have extremely long
operational lifetimes
- Consists of a brushless motor with integrated drive electronics
- Simple to integrate 2 wire interface like a standard DC Motor
- Feedback output available
- No cogging
- Dynamically balanced for extremely smooth performance
|
|
| Brushless DC Servomotors |
Diameter: 1.9 to 44 mm
Length: 5.5 to 90 mm
Stall Torque: 0.009 to 2758 mNm
Max Speed: 16000 to 100000 rpm
- No cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Low audible and electrical noise
- Extremely light and compact
- Smooth and accurate speed, position, and torque control
- Low vibration
- Speeds up to 100,000 rpm
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available in all sizes
- Feedback components available in all sizes
- Control electronics available for all motor series
- Custom systems available from design to production
|
|
| Motion Control Systems |
Diameter: 35 mm
Length: 83.3 mm
Max Speed: 12000 rpm
Nominal Power: Up to 44 Watt
- Velocity control for applications demanding very constant speed
performance with the least torque ripple
- Velocity profiles such as ramping, triangle and trapezoidal profiles
- Position control: Run to a defined postition with a high resolution
- Evaluate limit switches and refences
- Extended operating modes: Stepper motor mode, analog positioning mode
and much more
- Torque control with variable current limiting
- Configurations and settings can be saved
- Flexible I / O
- Integrated Brushless DC Servomotor
- Custom systems and software available on request
- High precision gearboxes available in all sizes
|
|
 |
 |
 |
Flat EC Motors
penny motors Miniature Drive Systems |
Diameter: 12 mm
Length: 2 mm
Stall Torque: 0.14 mNm
Max Speed: 60000 rpm
- No cogging or preferred rotor position
- No hysteresis or eddy current losses
- Extremely low current consumption
- Ultra flat dimensions
- Extremely light and compact
- Smooth and accurate speed control
- Speeds up to 60,000 rpm
- High power rare earth magnets
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available
- Control electronics available for all motor series
- Custom systems available from design to production
- Autoclavable and vacuum rated motors available
|
|
| smoovy Brushless DC Drives |
Diameter: 3 to 5 mm
Length: 8 to 13 mm
Stall Torque: 0.018to 0.1 mNm
Max Speed: 15000 rpm
- No cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Extremely light and compact
- Smooth and accurate speed, position, and torque control
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available in all sizes
- Control electronics available for all motor series
- Available as linear actuator
- Custom systems available from design to production
|
|
| Coreless DC Micromotors |
Diameter: 6 to 38 mm
Length: 15 to 63 mm
Stall Torque: 0.24 to 1290 mNm
Max Speed: 6700 to 20200 rpm
- Coreless rotor means no cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Low starting voltage
- Low rotor inertia for extremely fast acceleration and braking
- Extremely light and compact
- Smooth and accurate speed, position, and torque control
- Custom systems available from design to production
- Higher power to volume than other DC motor technologies
- High precision gearboxes available in all sizes
- Feedback components available in all sizes
- Control electronics available for all motor series
|
|
 |
 |
 |
Flat DC Micromotors
FTB Miniature Drive Systems |
Diameter: 23.50 to 26 mm
Length: 5.2 to 8.2 mm
Stall Torque: 0.15 to 7.01 mNm
Max Speed: 6600 to 13200 rpm
- Ultra flat dimensions
- No cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Low starting voltage
- Low rotor inertia for extremely fast acceleration and braking
- Extremely light and compact
- Custom systems available from design to production
- Very cost effective
- Precision gearboxes available in all sizes
|
|
2-Phase Stepper Motors
ARSAPE Miniature Drive Systems |
Diameter: 6 to 22 mm
Length: 9.3 to 30.7 mm
Holding Torque: 0.028 to 45 mNm
Stall Angle: 15 to degree
- Extremely high speed performance unlike other standard stepper types
- Extremely low current consumption
- Extremely light and compact
- Digital control for simple system integration
- Smooth and accurate speed control
- High/low temperature operation
- Operation in a vacuum
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available in all sizes
- Feedback components available in all sizes
- Control electronics available for all motor series
- Custom systems available from design to production
- 1 and 2 phase stepper motors available
|
|
1-Phase Stepper Motors
ARSAPE Miniature Drive Systems |
Step Angle: 15 to 60 degree
Torque at Nominal Voltage: 0,02 to 0,075 mNm
- Extremely high speed performance unlike other standard stepper types
- Extremely low current consumption
- Extremely light and compact
- Digital control for simple system integration
- Smooth and accurate speed control
- High/low temperature operation
- Operation in a vacuum
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available in all sizes
- Feedback components available in all sizes
- Control electronics available for all motor series
- Custom systems available from design to production
- 1 and 2 phase stepper motors available
|
|
 |
 |
 |
Flat DC Gearmotors
FTB Miniature Drive Systems |
Diameter: 23.5 to 26 mm
Length: 5.2 to 7.2 mm
Standard Ratios: from 6:1 to 1257:1
Torque, Continuous Duty: 30 to 100 mNm
- Ultra flat dimensions
- No cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Low starting voltage
- Low rotor inertia for extremely fast acceleration and braking
- Extremely light and compact
- Custom systems available from design to production
- Very cost effective
- Precision gearboxes available in all sizes
|
|
| Linear Actuators |
Nominal Screw Diameter: 3.4 to 5.8 mm
Length inc. motor: 12.22 to 23.4 mm
Continuous pull force: 2.8 to 41.2 mNm Intermittent pull force: 4.2 to 61.8 mNm
- No cogging or preferred rotor position
- No iron losses
- Extremely low current consumption
- Extremely light and compact
- Smooth and accurate speed, position, and torque control
- Electronic commutation for extremely long operational lifetime
- High precision gearboxes available in all sizes
- Control electronics available for all motor series
- Available as linear actuator
- Custom systems available from design to production
|
|
| Drive Electronics |
- Modern Technology in Miniature Format
- High efficiency
- Unique temperature supervision
|
|
|
|
 |
 |
 |
| Precision Ball Screws |
Diameter: 10 to 28 mm
Length: 70 to 260 mm |
|
| Precision Linear Bearings |
Diameter: 4 to 12 mm
Length: 5 to 18 mm |
|
| 4-point contact micro bearings |
microsphere® 4-point contact bearings
The use of the 4-point contact bearing is interesting for the designer when
he/she pursues the following objectives:
- Space Saving » reduced size of the design, primarily with regard to
thickness
- Reduced friction conditions of the rotating elements with a large
diameter
- Ensuring of good load capacity in the radial and axial direction
- Efforts to reduce play
|
|
|
|
 |
 |
 |
| Integrated Encoders |
Diameter: 15 to 22 mm
- Integrated with the motor
- Diameter matching the motor type
- Extremely low current consumption
- Extremely light and compact
- Available in analog and incremental output
- Easy to interface
- Custom systems available from design to production
|
|
| Optical Encoders |
| Diameter: 30 to 46 mm |
|
| Magnetic Encoders |
| Diameter: 10 to 26 mm |
|
E 
