Navigation : EXPO21XX > FLUID 21XX > H05: Hydraulic Valves > Bieri Hydraulik
  • Offer Profile
  • With our products we raise the Hydraulic bar even higher.

    If you are looking for hydraulic solutions, and there is only little space, we are just starting to get going. We question, look and dismiss until we have found the perfect product for you.

Product Portfolio
  • Pumps

      • Micro axial piston pumps

            • Axial piston pumps AKP (Micropumps)

            • BIERI Micro-Axial piston pumps AKP are very compact axial devices, with a very high volumetric efficiency, wide speed range and increased reliability, even under rough ambient conditions

              We distinguish between two different designs:

              • Micropumps with 2 threaded ports, inlet and outlet
              • Micropumps with radial sealed outlet port and suction openings in housing to submerge the micropump for downhole applications

              Operating pressure:: up to 500 bar
              Displacement: 0,10 bis 0,36 cm3/rev
              Speed Range: 100 up to 5000 rpm

        • Radial piston pumps

            • Radial piston pumps BRK501/502

            • BIERI combination pumps consists of the very robust radial device BRK and a flanged-on external tothed gear pump. The modulare principle allows to adapt any BIERI radial piston pump (BRK and MRK) with a gear pump.

              Operating pressure: up to 500 bar
              Displacement: 0,24 up to 8,14 cm3/rev
              Speed Range: up to 2000 rpm

            • Radial piston pumps BRK701/702

            • BIERI radial piston pumps BRK are very robust radial devices with high volumetric efficiency, wide speed range and high reliability, even under rough conditions.

              Operating pressure: up to 700 bar
              Displacement: 0,24 up to 8,14 cm3/rev
              Speed Range: up to 2000 rpm

            • Radial piston pumps BRK11/12

            • BIERI radial piston pumps BRK are very robust radial devices with high volumetric efficiency, wide speed range and high reliability, even under rough conditions.

              Operating pressure: up to 1000 bar
              Displacement: 0,47 up to 8,14 cm3/rev
              Speed Range: up to 2000 rpm

            • Combination pumps BKP

            • BIERI combination pumps BKP consists of the robust radial device BRK and a flanged external toothed gear pump. The modular design allows any BIERI radial pistion pump (BRK and MRK) to be adapted with a gear pump. This results in multitudinous variations and combinations.

              Operating pressure LP: up to 250 bar
              Displacement LP: 4,0 up to 61,1 cm³/rev
              Operating pressure HP: up to 1000 bar
              Displacement HP: 0,24 up to 8,14 cm³/rev
              Speed Range: up to 2000 rpm

            • Special radial piston pumps SRK 701/702

            • BIERI special radial piston pumps SRK are extremely robust radial devices with highest reliability, even under roughest conditions and suitable for applications with low viscous media.

              Operating pressure: up to 700 bar
              Displacement: 0,24 up to 8,14 cm3/rev
              Speed Range: 1800 rpm

            • Special radial piston pumps SRK-ATEX

            • BIERI special radial piston pumps SRK-ATEX are extremely robust radial devices with highest reliability, even under roughest conditions and suitable for use in explosion hazardous areas (Class II: gases, vapours, mists)

              Operating pressure: up to 700 bar
              Displacement: 0,24 up to 8,14 cm3/rev
              Speed Range: 1800 rpm

            • Multi-outlet pumps MRK701/702

            • BIERI radial pistion pumps MRK are very robust radial devices with various pressure outlets, e.g. for different simultaneous hydraulic motions.

              Number of circuits: 2 - 9
              Operating pressure: up to 700 bar
              Displacement/Circuit: 0,16 up to 3,62 cm³/rev
              Speed range: up to 2000 rpm

            • Radial piston pumps HRK

            • BIERI radial piston pumps HRK are very light and compact designed high pressure radial piston devices with hollow shaft. This enables optimum space-saving installation with a direct mounted E-motor (without bell housing and coupling).
Optional adapted with integrated pump protection valve this pump series is unbeatable regarding multifunc-tionality and optimization of installation space.

              Operating pressure: up to 700 bar
              Displacement: 0,12 up to 2,01 cm3/rev
              Speed Range: 500 up to 3600 rpm

            • Combination pumps KKP

            • BIERI radial piston pumps KKP and SKP (SKP with adapted external gear pump) are very light and compact designed 2-stage pump units (HP/LP) with hollow shaft. This enables optimum space-saving installation with a direct mounted E-motor (without bell housing and coupling).
Adapted with integrated valves this pump series is unbeatable regarding multifunctionality and optimization of installation space.

              Operating pressure LP: up to 160 bar
              Displacement LP: 0,35 bis 4.60 cm³/U
              Operating pressure HP: up to 700 bar
              Displacement HP: 0,12 up to 1,88 cm³/rev
              Speed Range: 1500 up to 3600 rpm

            • Combination pumps SKPI

            • BIERI radial piston pumps SKPI, adapted with external gear pump, are very light and compact designed 2-stage pump units (HP/LP) with hollow shaft. The new IEC flange - in three sizes - enables optimum space-saving installation with a direct mounted E-motor (without bell housing and coupling).
Now the pump is available with or without integrated valve DVM (700 bar) and unloading valve DAM. Therefore this pump is unbeatable regarding multifunctionality and optimization of installation space.

              Operating pressure LP: up to 100 bar
              Displacement LP: 4,45 up to 16.71 cm³/U
              Operating pressure HP: up to 700 bar
              Displacement HP: 0,45 up to 2,71 cm³/rev
              Speed Range: up to 2000 rpm

          • Pumping elements

                • Pumping elements PEH

                  • Self priming
                  • High reliability
                  • Pumping element is filled during outward movement of the element and is discharged during external powered movement (ingoing movement)
                  • Flow is automatically controlled by the built-in valves
                  • The pumping element will discharge fluid independently of the direction of rotation

                  Operating pressure: up to 1000 bar
                  Stroke: 0,16 up to 0,91 cm3

            • Valves

                • Seated valves

                    • Seated valves type WVM-6i

                    • The BIERI series WVM-6I consists of direct solenoid operated leakage free seated valves, applicable for high duty cycles. The modular principle of the main components allows for a huge variety of circuit symbols: 2/2-, 3/2-, 3/3-, 4/2-, 4/3- and 4/4-way functions with positive and also negative overlap. Consequently these valves are superior and space-saving alternatives to spool valves which can require additional leackage free shutoff valves.
                    • Seated valves type WVMX / WVHX

                    • BIERI seated valves out of series WVHX are directly operated, oil leakage free valves of size NG4, suitable for constant pressure ranges up to 700 bar with mineral oils. These electrically operated valves are suitable in in explosion-prone zones where devices marking Ex II 2G c IIC T4 (valve) and Ex II 2G Ex e mb IIC T4 Gb (solenoid coil) are needed, according to RL 94/4 EG.
                    • Seated valves type WVM-4B (500+)

                      • Available as 2/2-, 3/2-, 3/3-, 4/2- and 4/3-valve
                      • Porting: NG 4
                      • Operating pressure: 500 bar
                      • Flow rate: 12 l/min
                    • Seated valves type WVM-4B-Bi

                    • BIERI seated valves out of series WVM-4B-Bi are bidirectional, directly operated, oil leakage free valves of size NG4, suitable for constant pressure ranges up to 700 bar with mineral oils and also with high viscous media like grease up to NLGI-class 2. These electrically operated valves are suitable for bidirectional flow.
                    • Seated valves type WV700

                    • The BIERI series WV700 are direct operated and leakage free seated valves out of the series NG6 700 bar, suitable for highest demands. The modular principle of the major components allows a great variety of symbols – 2/2-, 3/2-, 3/3-, 4/2-, 4/3- way functions with positive or negative overlap. Hence these valves are superior and space-saving alternatives to spool valves which require additional shutoff valves.
                    • Seated valves type WVH700

                    • BIERI seated valves out of series WVH700 are , directly operated, oil leakage free valves of size NG4, suitable for constant pressure ranges up to 700 bar and flow rates up to 12 l/min. Sie können zu einer Längsverkettung mit mehreren Ventilen für diverse Funktionen zusammengebaut oder alleinstehend auf einer Einzelanschlussplatte im Rohrleitungssystem montiert werden.
                  • Pressure valves

                      • Pressure relief valve type DVM (500+)

                        • Porting NG 4
                        • Operating pressure: up to 500 bar
                        • Flow rate: up to 30 l/min
                      • Pressure relief valve Type DV700

                        • Porting NG 6
                        • Operating pressure: up to 700 bar
                        • Flow rate: up to 25 l/min
                      • Pressure relief valves DV2

                      • Poppet design, direct operated, max. pressure adjustable by locking nut

                        • Porting NG 6
                        • Operating pressure: 1000 bar
                        • Flow rate: up to 12 l/min
                      • Proportional pressure relief valves Type PDV700

                      • The BIERI PDV700 is a proportional pressure relief valve from the series NG6, 700 bar. It is available direct operated for small flow rates as well as – along with a main stage – pilot operated for higher flow rates and can be operated by various amplifiers which enable operations by «open loop» or «closed loop» control.
                      • Unloading valve type DAM (500+)

                        • Porting NG 4
                        • Operating pressure: up to 500 bar
                        • Flow rate: up to 40 l/min
                      • Unloading valve type DA700

                        • Porting NG 6
                        • Operating pressure: up to 700 bar
                        • Flow rate: up to 25 l/min
                    • Ttitel

                    • Text
                        • Pressure reducing valve type DMM (500+)

                          • Porting NG 4
                          • Operating pressure: up to 500 bar
                          • Flow rate: up to 30 l/min
                        • Pressure reducing valve type DM700

                          • Porting NG 6
                          • Operating pressure: up to 700 bar
                          • Flow rate: up to 25 l/min
                      • Shut-off valves

                          • Shut-off valve type AVM (500+)

                            • Porting NG 4
                            • Operating pressure: up to 500 bar
                            • Flow rate: up to 25 l/min
                          • Shut-off valve type AV700

                            • Porting NG 6
                            • Operating pressure: up to 700 bar
                            • Flow rate: up to 25 l/min
                          • Hand shut-off valves type SPV2

                          • Poppet design, leakage free, low operating force, both connections designed for max. pressure

                            • Porting NG 6
                            • Operating pressure: up to 1000 bar
                            • Flow rate: 20 to 32 l/min
                          • Check valve type RVM/RVH

                            • Porting NG 4
                            • Operating pressure: up to 700 bar
                            • Flow rate: up to 45 l/min
                          • Pilot operated check valve type ERVM (500+)

                            • Porting NG 4
                            • Operating pressure: up to 500 bar
                            • Flow rate: up to 25 l/min
                          • Pilot operated check valve type ERV700

                            • Porting NG 6
                            • Operating pressure: up to 700 bar
                            • Flow rate: up to 25 l/min
                          • Pilot operated check valve type ERVPM

                            • Porting NG 10
                            • Operating pressure: up to 500 bar
                            • Flow rate: up to 63 l/min
                          • Load holding-lowering valves type SBV700

                          • Direct operated valves, seated valves in sandwich mounting execution, pilot pressure adjustable up to 350 bar.

                            • Porting NG 6
                            • Operating pressure: up to 700 bar
                            • Flow rate: up to 25 l/min
                        • Flow control valves

                            • Throttle valves type SDM (500+)

                              • Porting NG 4
                              • Operating pressure: up to 500 bar
                              • Flow rate: up to 25 l/min
                            • Throttle check valve type SDRVM (500+)

                              • Porting NG 4
                              • Operating pressure: up to 500 bar
                              • Flow rate: up to 25 l/min
                            • Throttle-check valve type SD700/SDRV700

                              • Porting NG 4
                              • Operating pressure: up to 500 bar
                              • Flow rate: up to 25 l/min
                          • Manual spool valves

                                • Manual spool valves type HSV700

                                • Minimum weight, excellent price-performance ratio, gate design, ready to install

                                  • Porting NG 6
                                  • Operating pressure: up to 700 bar
                                  • Flow rate: up to 25 l/min
                            • Subplates

                                • Subplates type AP700/RP700/EP700

                                • Subplates with side or bottom connection, compact design up to 6 stations

                                  • Porting NG 6
                                  • Operating pressure: up to 700 bar
                                  • Flow rate: up to 25 l/min
                                • Intermediate plates, accessories type ZP700/BL700/RV700

                                • intermediate plates for the installation of orifices and check valves, intermediate plates with threaded connections for measuring instruments, check valves and orifices.

                                  • Porting NG 6
                                  • Operating pressure: up to 700 bar
                                  • Flow rate: up to 25 l/min
                              • Pressure switches

                                  • Type DV7.1

                                  • With one adjustable change-over switch

                                    Superior conception
                                    Piston type pressure switch with one change-over switch, easily adjustable over the entire pressure range, with scale for presetting of the pressure switching point.

                                    Easy to install
                                    Ideal overall dimensions, can be mounted in any operation position, turnable under full pressure around the longitudinal axis, instrument plug turnable by 4 x 90°.

                                    Universal application
                                    7 pressure ranges for the optimal adaptation to any operating pressure, suitable for mineral oils (HLP-oils according DIN 51524), other mediums on request.

                                    Damping
                                    For the protection of the pressure switch we recommend the installation of a damping element as for example a throttle screw with double fitting according to the table below.

                                  • Type DV7.2

                                  • With two adjustable change-over switch

                                    Superior conception
                                    Piston type pressure switch with one change-over switch, easily adjustable over the entire pressure range, with scale for presetting of the pressure switching point.

                                    Easy to install
                                    Ideal overall dimensions, can be mounted in any operation position, turnable under full pressure around the longitudinal axis, instrument plug turnable by 4 x 90°.

                                    Universal application
                                    7 pressure ranges for the optimal adaptation to any operating pressure, suitable for mineral oils (HLP-oils according DIN 51524), other mediums on request.

                                    Damping
                                    For the protection of the pressure switch we recommend the installation of a damping element as for example a throttle screw with double fitting according to the table below.

                                • Oil level switches

                                      • Oil level switches type FS

                                      • With any length up to 1200mm possible, our oil level switches can be threaded directly into tank cover

                                        Features
                                        • Guaranteed potential free switching
                                        • Can be dismounted without removing the tank cap
                                        • Suitable with many different fluids
                                        • Very good price/performing ratio