Navigation : EXPO21XX > FLUID 21XX > H24: Valves and switches > BARTEC
Videos
Loading the player ...
  • Offer Profile
  • BARTEC is the leading global provider of high-quality industrial safety technology for applications in explosion-hazardous areas.

    BARTEC specialists develop, produce and sell component solutions and system solutions for all areas where hazardous substances such as combustible liquids, gases and dusts are worked with.

    BARTEC is a competent partner for manufacturers of devices, apparatus and machines, for constructors of plants as well as for operators in the sectors of chemical, oil and gas industry, petrochemical industry, mining, pharmaceutical industry, energy and environment.
Product Portfolio
  • Analyzers and Measurement Technology

      • Analyzers and Analyzer Systems

      • Engineering
        • Feasibility studies
        • Cost/benefit aspect
        • Basic/detail engineering
        • Budget planning

        Production, Procurement, Delivery
        • Process analyzers
        • Physical property analyzers
        • Modular Gas Analyzer
        • Sample conditioning systems
        • HVAC/Cooling systems
        • Recovery systems
        • Procurement: enquiry requisition, tender comparison, preparation of documents ready for ordering, placing of orders and purchasing
        • Delivery

        International certificates
        • ATEX
        • CSA, C & US
        • others on request

        Service
        • Commissioning: connection, functional testing, calibration, performance test, instruction, final documentation
        • After Sales Service: spare parts supply, training courses, maintenance contracts
          • Modular Gas Analyzer MGAnano VG-4 Ex

          • Gas chromatography (GC) is a common method used in analytical chemistry for separating and analyzing compounds that can be vaporized without decomposition. Typically the method is used to separate different analytes of a mixture and to determine their concentrations. Based upon these concentrations other parameters of a mixture can be calculated such as calorific values, Wobbe Index, theoretical vapor pressure etc.

            Application
            • The BARTEC BENKE Modular Gas Analyzer
            • MGAnano VG-4 is used for:
            • Blending terminals: To optimize pipeline & terminal blending and to determine Wobbe index, calorific values and relative density alterations/optimization, vapor pressure alterations through butane or other diluents
            • Liquefied gas: Pipeline & terminal blending for e.g. propane traders, Wobbe index, calorific values and relative density alterations through N2 ballasting, ballasting through other gases, NGL extraction from LNG

            Special Features
            • Modular packaged Micro-GC MEMS technology
            • Liquid sample handling
            • Integrated automatic evaporation and mixing unit
            • Available communication interfaces: - Modbus/RTU, Modbus/TCP (bidirectional) - Remote access via Ethernet (VDSL or FOC is)
            • Short cycle times
          • Distillation Process Analyzer DPA-4 Ex

          • Application

            The BARTEC BENKE Distillation Process Analyzer DPA-4 is the only distillation analyzer that is compliant with the master norm ASTM D86. Apart from measurement cycles fully compliant with the norm, the DPA-4 can be operated in the so called Rapid Analyzer Mode (RAM) in which the cycle time can be reduced to approx. 60%. It therefore serves to enhance automatic control of blending processes. The DPA-4 offers to run the distillation process below atmospheric pressure which prevents samples that are sensitive to temperature (e.g. palm oils) from degradation. It also allows extending the measurement range to higher boiling points.

            Special Features
            • The complete boiling curve is measured in every cycle (SAM)
            • Measuring points of interest freely definable by software
            • Cycle time reduction is possible: faster determination of distillation points (RAM)
            • Enhances automatic control of blending processes
            • De-coking
            • Available communication interfaces:
              • Modbus /RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Integrated failure diagnosis and self monitoring
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Cold Filter Plugging Point Process Analyzer CFPP-4 Ex

          • Application

            The BARTEC BENKE Cold Filter Plugging Point Process Analyzer CFPP-4 is a system for the fully automatic determination of the cold filter plugging point of diesel and domestic fuels. The CFPP-4 allows diesel fuel producers to optimize the use of cold flow additives that allows spreading the usage of winter grade diesel at temperatures below the cloud point. Besides the step-cooling procedure the CFPP-4 also offers linear sample cooling.

            Special Features
            • Visible function cycles by using a measuring cell made of plexiglass/glass
            • Optimized assembly – easy removal of complete cell
            • No paraffin-adhesions on test mesh filter by flushing with preheated sample
            • No correlative measurement, but exact reconstruction of cycles as described in ASTM D6371
            • Identical test mesh filter as used in laboratory method
            • Possibility to shorten cycle time by:
              • Switching between summer and winter setting
              • Reading cloud point value (if available)
            • Integrated failure diagnosis and self monitoring
            • Available communication interfaces:
              • Modbus/RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Flash Point Process Analyzer FPA-4 Ex

          • Application

            The well established Flash Point Process Analyzer FPA-4 remains the best solution to continuously measure the flash point of kerosene, diesel and other low sulphur refinery products. The improved concept offers an extended measuring range up to 180°C (356°F). The catalytic oxidation technique significantly reduces maintenance requirements by eliminating carbonization of the sample on the cell.

            Special Features
            • Continuous measurement
            • Overflow protection
            • Multi-stream capability
            • Integrated failure diagnosis and self monitoring
            • No coking of measuring cell by catalytic reaction
            • Scheduled automatic regeneration
            • Available communication interfaces:
              • Modbus/RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Freezing Point Process Analyzer FRP-4 Ex

          • Application

            The BARTEC BENKE Freezing Point Process Analyzer FRP-4 is a system for the fully automatic determination of the freezing point temperature of aviation fuels. The FRP-4 can be used for both determination of cloud point temperature and freezing point temperature of the sample.

            Special Features
            • Cloud Point also measurable
            • Rugged design of measuring cell
            • Optimized assembly – easy removal of complete cell
            • Available communication interfaces:
              • Modbus /RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Integrated failure diagnosis and self monitoring
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Pour Point Process Analyzer PPA-4 Ex

          • Application

            The BARTEC BENKE Pour Point Process Analyzer PPA-4 is a system for the fully automatic determination of the pour point of a variety of products. The PPA-4 is used by lube oil producers to optimize the production processes and the use of cold flow additives. It is also used by fuel oil producers to meet market demands. The PPA-4 is the only process analyzer that is compliant with the applicable norm using a tilting device.

            Special Features
            • Real tilting measuring cell
            • Rugged design of measuring cell
            • Optimized assembly – easy removal of complete cell
            • Available communication interfaces:
              • Modbus/RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Integrated failure diagnosis and self monitoring
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Vapor Pressure Process Analyzer RVP-4 Ex

          • Application

            The BARTEC BENKE Vapor Pressure Process Analyzer RVP-4 measures the vapor pressure of various petroleum products. Due to its design it can be used for gasoline applications as well as for high pressure applications on natural gas liquids. It is also the best choice for applications for viscous samples such as crude oil without the necessity of implementing additional wash cycles. It is also possible to measure the vapor pressure at different temperatures e.g. True Vapor Pressure (TVP) for storage tank application.

            Special Features
            • Rugged design of measuring cell
            • High precision and maximized performance due to optimized assembly of measuring cell
            • Minimized maintenance requirements due to temperature control and insulating system without oil bath/pumps
            • Wide range of inlet temperatures
            • Also applicable for highly viscous samples
            • Low sample consumption
            • Re-cooling of peltier device by either product or coolant
            • Available communication interfaces:
              • Modbus /RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Integrated failure diagnosis and self monitoring
            • Heat tracing if required
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Viscosity Process Analyzer VISC-4 Ex

          • Application

            The BARTEC BENKE Viscosity Process Analyzer VISC-4 continuously measures the kinematic viscosity of a product via the capillary method. Due to the outstanding performance and sample temperature stability of ± 0.02 K the VISC-4 is the best choice for highly accurate viscosity measurements e.g. lube oil production and fuel oil blending. This high level of accuracy results in cost reduction while improving product quality. The VISC-4 is suitable to handle samples with a viscosity of up to 1000 cSt at measurement temperatures of up to 100 °C.

            Special Features
            • Direct and continuous measurement of kinematic viscosity therefore direct comparison with laboratory results without any need for conversion
            • Integral measurement of the density therefore calculation and display of the dynamic viscosity
            • Minimized maintenance requirements due to temperature control and insulating system without oil bath/pumps
            • Compliance of the temperature stability (±0.02 K) as defined in standard ASTM D445
            • Necessity of Hagenbach correction is eliminated
            • Multi-stream capability
            • Automatic rinsing and draining option
            • Integrated failure diagnosis and self monitoring
            • No atmospheric drain required, backpressure at analyzer outlet permitted (depends on application)
            • Available communication interfaces:
              • Modbus/RTU, Modbus/TCP (bidirectional)
              • Remote access via Ethernet (VDSL or FOC is)
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • Viscosity Index Process Analyzer VI-4 Ex

          • Application

            The BARTEC BENKE Viscosity Index Process Analyzer VI-4 consists of two viscosity process analyzer units. One analyzer unit measures the kinematic viscosity at a temperature of 40°C and the other at a temperature of typically 100°C. These two values are used to calculate the VI according to ASTM D2270. Due to the outstanding performance and sample temperature stability of ± 0.02 K the VI-4 is the best choice for highly accurate viscosity index measurements e.g. lube oil production and fuel oil blending. This high level of accuracy results in cost reduction while improving product quality. The VI-4 is suitable to handle samples with a viscosity of up to 800 cSt at measurement temperatures of up to 100°C.

            Special Features
            • Direct and continuous measurement of kinematic viscosity therefore direct comparison with laboratory results without any need for conversion
            • Integral measurement of the density therefore calculation and display of the dynamic viscosity
            • Minimized maintenance requirements due to temperature control and insulating system without oil bath/pumps
            • Compliance of the temperature stability (±0.02 K) as defined in standard ASTM D445
            • Necessity of Hagenbach correction is eliminated
            • Multi-stream capability
            • Automatic rinsing and draining option
            • Integrated failure diagnosis and self monitoring
            • No atmospheric drain required, backpressure at analyzer outlet permitted (depends on application)
            • Available communication interfaces: - Modbus/RTU, Modbus/TCP (bidirectional) - Remote access via Ethernet (VDSL or FOC is)
            • Validation report for quality assurance
            • Freely programmable digital and analog inputs
          • CLORA On-Line Chlorine Analysis in Crude, Water and Process Streams Ex

          • Chlorine monitoring in crude oil, process streams, water and effluent streams presents valuable insights in e.g. desalting and refining operations for corrosion management, environmental and process control purposes. The CLORA On-Line Analyzer present a breakthrough process analytical solution for quantification of total chlorine from 0.2 ppm up to 3000 ppm.

            CLORA analyzers are not sensitive to sample temperature variation and do not requiere consumable gasses or liquids. Comprehensive data communications and diagnostics capabilities enable a maximum in uptime. The CLORA On-Line Analyzer is based on the same MWD XRF analytical platform as the CLORA Bench-Top Analyzer.

            MWD XRF

            Monochromatic Wavelength Dispersive X-Ray Fluorescence (MWD XRF)
          • SINDIE® On-Line Sulfur Analysis in Petroleum Fuels Ex

          • The SINDIE® On-Line Analyzer is an industrial grade process sulfur analyzer with breakthrough detection capability for monitoring fuel streams as exacting as ultra low sulfur diesel and gasoline. This process analyzer presents the ultimate solution for Pipeline Terminals, where measurement speed, and reliability are essential. The breakthrough Monochromatic Wavelength Dispersive X-Ray Fluorescence technique of the SINDIE On-Line Analyzer offers a Limit Of Detection (LOD) of 0.6 ppm, and a dynamic range of 3000 ppm. This direct and non-destructive measurement technique does not require sample conversion or consumable gases and does not involve high temperature operations. The result: a robust process analyzer with minimal maintenance and unprecedented detection capability and measurement speed.

            MWD XRF Technology

            Monochromatic Wavelength Dispersive X-Ray Fluorescence (MWD XRF) analysis provides dramatically improved S/B over conventional XRF techniques, in a compact and simplified on-line configuration. The improved S/B is achieved by eliminating the scattering of bremsstrahlung from the xray source.
          • Model P-500 Flash Point Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly. The flash point temperature is defined as the lowest temperature at which application of an ignition source causes the vapor of specimen of the sample to ignite under specified conditions of test.

            Application

            The Flash Point of mid-distillate products is one of the properties that must be maintained and controlled in order to produce and sell products to the market. The ORB P-500 is a state-of-the-art analyzer that implements the newest of electronics and detection principles for a low cost means of monitoring the Flash Point of a product during the refining process.
          • Model P-600 Salt In Crude Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            Salt in crude is the amount of chloride based salts found in the sample in weight per volume.

            Application

            In certain areas of the world, crude oils with high level of salts exist. This crude oil must still be transported and refined and the high levels of salt pose problems if left untreated. De-Salting technology is well established but to be utilized effectively the need for quick and accurate measurements of the level of salt concentration is necessary. The immediate response of an on-line analyzer allows the operator to use De-Salters as efficiently as possible.
          • Model P-700 Reid Vapor Pressure Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            Reid Vapor Pressure is a common measure of the volatility of gasoline. It is defined as the absolute vapor pressure exerted by a liquid at 100°F (37.8°C) as determined by the test method ASTM D323. The test method applies to volatile crude oil and volatile nonviscous petroleum liquids, except liquefied petroleum gases.

            Application

            With the introduction of the Clean Air Act and its amendments in 1990 by the Environmental Protection Agency under Title II Emission Standards for Moving Sources, Part A - Motor Vehicle Emission and Fuel Standards, Section 211 Regulation of Fuels - (h) Reid Vapor Pressure Requirements, it has become unlawful to sell, offer for sale, dispense, supply, offer for supply, transport, or introduce into commerce gasoline with a Reid Vapor Pressure in excess of 9.0 pounds per square inch (psi) during the high ozone season (as defined by the Administrator).
          • Model P-800LT Freeze Point Analyzer, Low Temperature Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            The freeze point is the temperature at which the last of the wax crystals disappear when warming the sample, after first reaching the Cloud Point temperature.

            Application

            Given today’s highly competitive environment, oil refiners are demanding instrumentation that aids in the optimization of the refining process. Therefore, refineries require a reliable and accurate analysis system of the Freeze Point temperature to meet the required specifications. This analysis will allow the operators to optimize the refining process and therefore lower production costs while improving product quality.
          • Model P-820LT Cloud Point Analyzer, Low Temperature Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            The cloud point is the temperature at which wax crystals form in a sample as it is cooled giving the sample a cloudy appearance.

            Application

            Given today’s highly competitive environment, oil refiners are demanding instrumentation that aids in the optimization of the refining process. Therefore, refineries require a reliable and accurate analysis system of the Cloud Point temperature to meet the required specifications. This analysis will allow the operators to optimize the refining process and therefore lower production costs while improving product quality.
          • Model P-840/P-840LT No Flow Point Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly. The no flow point (correlating to pour point) is the temperature where a product (as it is cooled) stops flowing.

            Application

            Given today’s highly competitive environment, oil refiners are demanding instrumentation that aids in the optimization of the refining process. Therefore, refineries require a reliable and accurate analysis system of the No Flow (Pour Point) temperature to meet the required specifications. This analysis will allow the operators to optimize the refining process and therefore lower production costs while improving product quality.
          • Model P-900 Viscosity Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            Absolute viscosity provides a measure of a fluid’s internal resistance to flow.

            Application

            Given today’s highly competitive environment, oil refiners are demanding instrumentation that aids in the optimization of the refining process. Therefore, refineries require a reliable and accurate viscosity analysis system to meet the required specifications. This analysis will allow the operators to optimize the refining process and therefore lower production costs while improving product quality.
          • Model P-950 Viscosity Index Analyzer Ex

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            The viscosity index is a widely used and accepted measure of the variation in kinematic viscosity due to changes in the temperature of a petroleum product between 40°C and 100°C. A higher viscosity index indicates a smaller decrease in kinematic viscosity with increasing temperature of the product.

            Application

            Given today’s highly competitive environment, oil refiners are demanding instrumentation that aids in the optimization of the refining process. Therefore, refineries require a reliable and accurate viscosity analysis system to meet the required specifications. This analysis will allow the operators to optimize the refining process and therefore lower production costs while improving product quality.
          • Model W-800 UV Oil in Water Analyzer

          • To remain competitive, today’s refiners must employ all optimization and product control techniques available. The use of online physical property analyzers is one of the key features to reach those objectives because they measure important quality properties in the process directly.

            Oil in water is measured by measuring the strength of the flouresence caused by UV excitation.

            Application

            With growing public awareness and concern for controlling water pollution and enactment of the Clean Water Act in 1972 (amended in 1977) it has become increasingly important to continuously monitor the quantity of effluents in waste water prior to discharge. Finding a method of accurately obtaining results in a cost effective manner has plagued industrial companies for years due to the nature of the chemistry involved. The development of photometric and spectroscopic techniques has proved an invaluable tool in the application of on-line effluents monitoring. The removal of hazardous solutions and high temperature applications coupled with fast response and high accuracy has brought the use of photometric correlation techniques to the forefront of waste and process water monitoring.
          • Analyzer Systems

          • Sample Conditioning Systems, Turn-Key Analyzer Shelters

            Capital is employed right from the planning phase to the time of delivery. BARTEC BENKE engineers and technical staff contribute that your production process will be faster and more cost efficient. The portfolio comprises complete analyzer shelters according to DIN EN 61285 / IEC 1285 as well as complete solutions with integration of systems and instruments of other manufacturers.

            Typical Process Units Cover:
            • Terminals
            • Distillation units
            • Blending units for motor gasoline, gas oil and fuel oil
            • FCC units
            • Cracking units
            • Natural gas pipelines

            Production, Procurement, Delivery of Turn-key Analyzer Shelters:
            • On-site sample conditioning and fast loops
            • Sample conditioning
            • Analyzer shelters (Concrete, Glass-fibre reinforced plastic, steel, stainless steel, aluminium)
            • Auxiliary and supply systems
            • HVAC/Cooling systems
            • Recovery systems
          • Ex Compact Air-Conditioning Unit FKS-CLM

          • The FKS-CLM type Ex Compact Air-Conditioning Unit is characterized by its space-saving dimensions. In spite of being compact it offers an effective cooling capacity of 2 and 4 kW respectively. The device can be mounted easily on a fl at side panel and it is also suitable for setting up outdoors in temperatures ranging from -40 °C to +55 °C. It may of course also be retrofi tted into plants that are already in operation and in Ex p cabinets. With a heating, the compact air-conditioning unit can be used to bring cabinets and small containers to an exact temperature.

            Construction
            The external enclosure of the Ex Compact Air-Conditioning Unit is made of fibreglass-reinforced polyester. This makes it robust, antistatic and resistant to corrosion and mineral oil. The evaporator and the condenser are each in separate pressure-isolated compartments. The electric control unit is available on a mounting plate for use in non-hazardous areas, for example, for use in Ex p cabinets. Optionally, we assume the installation of control unit in an Ex d housing.
          • Service

          • Our service division provides to all clients in various industries at home and abroad a multiplicity of services.

            Installation
            • Mounting
            • Supply and waste disposal
            • Data connection

            Commissioning
            • Connection
            • Functional testing
            • Calibration
            • Performance test
            • Instruction
            • Final documentation

            After Sales Service
            • Spare parts supply
            • Training
            • Maintenance and repair contracts
            • Hotline
        • Trace Moisture Measurement for Gases

        • Stable Measurement for Process Safety
          The measuring principle of HYGROPHIL F 5673 is patented and has established in many different markets, based on the low service and maintenance efforts required. The analyzer was originally designed for the natural gas market. Today it is being used in a wide variety of markets to determine trace moisture contents for different gas and liquid hydrocarbon process streams.


          Moisture and Hydrocarbon Dew Point Measurement in Natural Gas
          HYGROPHIL HCDT is to protect natural gas and pipeline networks and to maintain failure-free operation. There are wo measurements of Quality Control of natural gas:
          • Water dew point
          • Hydrocarbon dew point
            • HYGROPHIL F, Moisture Analyzer, Type 5673-10, -11, -12, -13

            • HYGROPHIL F 5673 works with a combination sensor which by means of a fibre optical method measures the moisture content and by means of a PT100 measures the temperature in the medium. The very robust construction of the sensor and the measurement procedure itself offer several decisive advantages.

              Among the advantages of this measurement principle which is protected by patents are the following:
              • high measurement safety including accuracy, reproducibility and low hysteresis
              • long-term stability of the sensor (no drift!)
              • measurement directly in the pres-sured pipe is possible (pressured dew point!)
              • sensor can be placed in hazardous locations (class I/div. 1)
              • simple installation and integration (Swagelok, Parker, …)

              HYGROPHIL F 5673 was particularly designed for the natural gas industry. In the meantime it is used for moisture measurement in a diversity of gases and liquids. Due to the high-quality materials re used the sensor is extremely robust and resistant to almost all mediums.

              Applications HYGROPHIL F 5673
              • Calculation of moisture content in accordance with DIN EN ISO 18453
              • Moisture Measurement in Natural Gas
              • Moisture Measurement in the Recycle Gas of a Reformer
              • Moisture Measurement in hydrocarbon
            • HYGROPHIL HCDT

            • Measuring System for Determination of Hydrocarbon Dewpoint in Natural Gas

              HYGROPHIL HCDT has been designed especially for the field of natural gas. As the materials that are applied are of very high quality, the sensors are extremely robust.

              Application

              Hygrophil HCDT combines the established water dewpoint measurement and the hydrocarbon dewpoint sensor to detect the moister content, the temperature and the hydrocarbon dewpoint of the measured medium. Apart from the very robust construction of the sensors, it is the measuring method itself that provides a number of decisive advantages.

              Some advantages of this measurement principle protected by patents are:
              • High measuring certainty including precision, reproducibility and low hysteresis
              • Long-term stability of sensors
              • Measurement of HCDT at the cricondentherm point (pressure reduction)
              • Measurement of DT on high pressure side (pressure dewpoint)
              • Application in explosive area
              • Simple installation (standardized connections)
          • Gas Moisture Measurement

          • BARTEC BENKE's moisture measurement systems for gases has been a fixed term of analyse measurement for decades. Maximum accuracy, long term stability and reliability underline the success of our measurement devices and systems. We support you with our competence in solving your measurement problems. BARTEC BENKE offers system solutions for absolute gas moisture measurement under high temperatures, in dusty environments and aggressive gases. BARTEC BENKE also offers solutions for applications in Ex zones.
              • HYGROPHIL H 4230-10

              • Continuous moisture measurement in industrial processes

                System solution including gas withdrawal sensor, heated gas pipeline und measurement device.
                • Long-term stable psychrometer
                • Measurement range 0 to 100°C dewpoint
                • Profibus DP
                • Analogue Outputs

                Field of Application
                • Food Industry
                  Control of the water vapourisation in the baking industry, Hot air chain cookers, Monitoring the drying of cereals, coffee, milk powder etc.
                • Combusters and cogeneration plants
                  Emission measurement according to 13. and 17. BimSchV, Early detection of pipe bursts in boiler Systems, Fire-power control in waste incinerators
                • Building material industry
                  Dryers for sand, loam, kaolin, Dryers for plaster boards and wood fiber plates, Process control in brick production
                • Gas analyses technique
                  Flue gas analyses, Exhaust fumes analyses of engines, Mobile emission measurements
                • Ceramics and porcelain manufacturing
                  Control of burning process, Control of the gas according to German TA air
                • Chemical industry
                  Measurement of absolute humidity for accurate process management, Dryers for detergents, Dryers for fertilizers
                • Environmental measurement techniques
                  Sludge drying, Humidity Measurement in biogas and digester gas
                • Glass manufacturing
                  Monitoring the drying process e.g. fire protection glass
                • Pharmacy
                  Humidity control in coating, agglomeration or granulation processes
                • Metal industry
                  Control of the sinter process, Control of the coke drying
              • HYGROPHIL H 4230-12

              • Process Hygrometer for Ex zone 2

                HYGROPHIL H 4230-12 is explosion proof. It can be used in Ex zone 2 area. To guarantee the explosion protection the enclosure is continually perfused by a saving gas.

                Continuous moisture measurement in industrial processes. For very high demands in terms of being resistant to corrosion and dirt. Particularly suitable for cases where the air to be measured contains oil vapours, dust, water-soluble gases, solvents, acids and aggressive chemicals.

                • Measurement range: 20 to 100 °C DT
                • Secondary standard method in accordance with DIN 50012
                • Tragbare Ausführung für mobile Anwendungen
                • Continuous measurement
                • Constant scavenging

                Field of Application
                • Hot-ait tunnels for cooking
                • Foodstuffs
                • Fertiliser dryers
                • Various chemical processes
                • Copper-nickel works
                • Large combustion plants
                • Combined heating and power stations
                • Waste incineration plants
              • HYGROPHIL Z 1701-41

              • Measuring probe for moisture and oxygen in gases

                The process hygrometer HYGROPHIL Z 1701-41 is designated as a measuring probe in gases according to the patented dual-element-operation based on zirconoxid sensors.

                Monitoring and controlling of the moisture in gases results in equal high quality. Efficient energy use and under-passing admissible emission limits in many industrial processes are easily achieved.

                Due to no need of maintenance for the process hygrometer HYGROPHIL Z 1701-41, it is suitable for continuos operation in industrial processes.

                Applications
                • Textile dryers
                • Baking ovens
                • Drying covers
                • Hot air tunnels
                • Ceramic dryers
                • Smoke chambers
                • Food industry
                • Pet food dryers
                • Roasting plants
                • Calcinating furnaces
                • Plasterboard dryers
                • Rotary kilns
                • Kaolin dryers
                • Sand and mineral dryers
              • HYGROPHIL K 4326-31

              • Multifunctional moisture and temperature transmitter

                HYGROPHIL K 4326-31 is a combination of a high quality capacitive humidity-sensor and the newest microprocessor technology. These are the guarantee for best accuracy, excellent long-term stability, small hysteresis and high resistance to pollutants.

                Easy installation and on-site adjustment guarantee a simple service and a high availability even in harsh industrial applications. The actual measured or calculated data can be indicated on the display.

                Applications
                • Chemical industry
                • High end HVAC
                • Drying processes
                • Open processes
                • Meteorology
                • Green house
              • HYGROPHIL DTP 1500-10

              • Optical dew-point sensor for online measurement

                HYGROPHIL DTP works according to the patented method
                of internal total reflection. The sensor can be installed
                directly into the compressed-air line and thus determins
                the exact pressure dew-pont.
                • LC display
                • On site configuration
                • Process connection and registration via analog current output and RS 232 interface
                • Usable for online measurement in the range from 0 to 16 bar overpressure
                • No conversion in case of varying pressure conditions is required
                • Short response time

                Applications
                • Compressed-air networks
                • Monitoring, controlling and regulating tasks
                • Sensor reaction tool
            • Contactless Temperature Measurement

            • BARTEC's "contactless temperature measurement" has been dealing with infrared-measurement for more than 30 years.
              The success of numerous installed measurement devices and systems underlines the high competence as your partner for solving measurement problems.
              OEM solutions for up to 250 °C environmental temperature and sensors for hazardous areas are components of the product range.

              Applications
              • moving objects
              • measurement with a short measurement period >100 ms
              • objects, that require contactless measurement (foils, lacquers, glass surfaces, etc.)
              • objects >1500 °C
              • objects in high frequency fields
                • Thermophil INFRAsmart R 300/ 301 / 302

                • Contactless measurement of temperature for all applications

                  Stationary pyrom-eter for contactless and quick measurement of temperature for objects in motion, under current or with poor conduction of heat, e.g. plastic films, paper or bulk materials.

                  • compact, sturdy pyrometer
                  • integrated electronics up to 70 °C
                  • two-wire techniques 4 - 20 mA
                  • HART interface
                  • spectral range for plastic, glass, metal
                  • optic options for different measures
                  • punctual temperature registration with good price-/performance ratio

                  Applications
                  • plastics: thermoforming, foil production
                  • textiles: textile drying
                  • asphalt: mineral temperature of rotary run-out, asphalt temperature when silos are filled
                  • asphalt temperature when asphalt is loaded
                  • glass: glass forming, flat glass treatment
                  • chemical industry: rotary kilns
                  • automobile industry: brakes, lacquering
                  • baking: regulation of hotplate temperature
                • Thermophil INFRAht R 310 / 311 / 312 / 320

                • Contactless measurement of temperature at high ambient temperatures

                  • pyrometer for environmental temperature up to 125 °C
                  • without extra cooling
                  • separated electronics
                  • two-wire techniques 4 to 20 mA
                  • HART interface
                  • spectral range for plastics, glass, metal
                  • optic options for different measures

                  Applications
                  • plastics: thermoforming, foil production
                  • textiles: textile drying
                  • asphalt: mineral temperature of rotary run-out, asphalt temperature when silos are filled
                  • asphalt temperature when asphalt is loaded
                  • glass: glass forming, flat glass treatment
                  • chemical industry: rotary kilns
                  • automobile industry: brakes, lacquering
                  • baking: regulation of hotplate temperature
                • Thermophil INFRA R 271

                • Contactless measurement of temperature at high ambient temperatures

                  Stationary and robust measuring sensor for contactless temperature measurement at high ambient temperatures.
                  • robust and tight stainless steel casing IP65
                  • two-conductor-technology 4 to 20 mA
                  • Measuring head is pluggable

                  Applications
                  • continuous furnaces for lacquer drying
                  • textile and paper drying
                  • and others
              • Automation & Enterprise Mobility

                  • Human Machine Interface

                      • POLARIS PROFESSIONAL

                      • The POLARIS Panel PC  is an innovative further development of the POLARIS PROFESSIONAL Serie. High-resolution displays with LED technology and touchscreen for intuitive as well as comfortable operation are available now in the standard variant.

                        State-of-the-art LED display technology ensures the optimum contrast even with a large viewing angle. This Panel PC has been equipped as standard with the latest generation processor, the Intel® AtomTM with 1.6 GHz. The pre-installed operating system is Windows® XP and Windows 7® is optionally possible. Thanks to the integrated keyboard customisation for Windows®, Siemens WinCC flexible® , RS View® or BMSGraf- pro, the POLARIS Touch Panel can be used for all visualisation tasks. They can be connected to the control or the process control system through Ethernet, PROFIBUS-DP or various serial COM interfaces.
                      • POLARIS REMOTE

                      • The POLARIS Remote unit by BARTEC is a display with keyboard and mouse with which a PC can be operated in safe areas of hazardous areas.

                        Distances of up to 10,000 m are possible. POLARIS Remote 19.1" offers the user the possibility of using any currently available PCbased process control system, without any restrictions in the Ex area.
                      • POLARIS COMFORT

                      • The POLARIS Touch Panel is an innovative further development of the POLARIS Panel PCs 5.7". High-resolution displays with LED technology and touchscreen for intuitive as well as comfortable operation are available now in the standard variant. State-of-the-art LED display technology ensures the optimum contrast even with a large viewing angle. The proven LX800 offers sufficient computer capacity for presenting HTML pages or functioning as a remote client.
                      • POLARIS BASIC

                      • With the Panel PC, process visualizations can be directly connected in explosive areas without the need for additional intrinsically safe isolation cards. The laying of blue lines for intrinsically safe circuits is dropped. A separate wiring of the data line is not necessary. The Panel PC can be directly connected to the PROFIBUSDP or the communication interface of the control station. We offer e. g. RS422/485 or PROFIBUSDP as well as an optional supply module for handheld scanners.
                    • Bus Technology

                        • Remote I/O Systems ANTARES

                        • The hot swap capability allows the electronic unit to be replaced without disconnecting from voltage even in an Ex atmosphere. The internal and galvanically isolated bus connection is established by simply joining the modules to the RCU. A bus rail is not necessary. Line break/short-circuit monitoring can be programmed for each channel. The bus status messages and individual messages per channel are displayed through the LEDs. This facilitates diagnosis at the module as well. The module is programmed with Software ANTARES Designer. See the system description for installation instructions.
                        • MODEX Bus System

                        • PROFIBUS-Interface 16 x digital out
                          This module allows the activation of 16 actuators in the hazardous area via PROFIBUS-DP.

                          For example, encapsulated solenoid valves or indicator lamps can be directly activated with 24 V/500 mA.

                          LEDs on the front of the module output bus status as well as output states.
                        • Control Unit MODEX

                        • Fused modules are required to protect equipment and power circuits in areas in which an explosion hazard exists. The increasing automation of functions and processes make it necessary to install the standard protective devices on-site.

                          An advantage of MODEX fuses is that they are fitted in explosion-protected enclosures with integrated double terminals. This allows the input and output voltage to be used further by the MODEX component.
                          Please indicate the desired current value with your order (see selection chart).
                        • Resistive Coupling Element

                        • The 1 kOhm/10 kOhm resistive coupling element is used to monitor open and short circuits in isolator amplifier circuits controlled by mechanical contacts. The coupling element is installed directly to the control contact or inside its terminal box.

                          Function
                          Numerous isolator amplifiers can monitor the connected sensor line for open or short circuit conditions thanks to the employment of electronic proximity switches to which current can be applied in both damped and undamped status DIN EN 60947-5-6. Current values outside the specified range are identified as open or short circuits. If simple mechanical contacts are used, it is not possible to identify a short circuit. Neither can be distinguished between open circuit and open contact.
                      • Industry Tablets/Tablet PCs

                          • Agile X

                          • The BARTEC Agile X is an extremely slim-line, rugged and highly flexible industrial tablet PC for rough environments.

                            Agile X has a large number of international certifications and can be used throughout the world. It is licensed for ATEX and IECEx Zone 2/22 and to UL Class I Division 2. Further national certifications are possible on customer request.

                            Thanks to its broad range of functions, the Agile X is the perfect assistant to service technicians, operating staff, engineers and project managers in the field and in industry.

                            Features
                            • Highly flexible industrial tablet PC for rough environments
                            • Brilliant, high-resolution, bonded 10.1" touch LED display, also sunlight readable
                            • Powerful Quad-Core processor for high working speed and long battery life
                            • Rugged design to military specification MIL-STD-810G
                            • Integrated Bluetooth 4.0, WLAN and optional LTE radio module
                            • Simple integration into your corporate environment using Windows Embedded 8.1 Industry Pro
                            • Data capture with barcode and RFID scanner
                            • Freely configurable expansion interface for customer specific charging
                            • Extensive accessories
                          • Service Level ALL-IN FROM THE START

                          • Setting a new standard for service
                            Every day, you count on BARTEC Tablet PCs to keep your business running efficiently and cost effectively. Now, you can protect your BARTEC Tablet PCs against accidental damage, normal wear and tear, and more with one of the most complete service offerings available today –

                            Service Level ALL-IN FROM THE START
                            This offering provides seamless service at the right price, delivering expanded services at a low cost. No matter where in the world you are, our support infrastructure ensures fast and reliable turnaround. Count on ALL-IN FROM THE START for maximum uptime and optimal investment protection of your BARTEC Tablet PC. Now that‘s true peace of mind.

                            A set turnaround time
                            ALL-IN FROM THE START contracts offer repair service with an in-house turnaround time of five business days. At BARTEC, we don’t focus on how it happened, but on how to get you up and running as soon as possible.

                            You‘re covered
                            ALL-IN FROM THE START provides comprehensive coverage at no additional cost to protect you from the unexpected. Our plans cover normal wear and tear, as well as repairs to displays, plastics and other internal and external components damaged through accidental breakage. You get multi-year all-in repair coverage protecting you from “surprise“ repair cost and providing the investment security you need to cut total cost of ownership – adding value to your business.

                            Convenient repair request
                            You can initiate repair quickly and easily via the BARTEC website, with anywhere anytime convenience. Just log on to the BARTEC webpage at www.bartec-group.com/rma. Simply go to "Service" to download our RMA form and request an RMA number (Return Material Authorization).
                            BARTEC technicians expertly repair your equipment to manufacturer specifications.
                          • Lumen X7

                          • Lumen X7 from BARTEC is a rugged and highly flexible industrial tablet for rough environments.

                            Lumen X7 has a large number of international certifications and can be used throughout the world. It is approved for ATEX and IECEx Zone 2/22 and for UL Class I Division 2. Approvals for other countries are possible on customer request.

                            Thanks to its numerous functions, the Lumen X7 provides perfect support for warehouse management, transport, service technicians, operating personnel, engineers and project managers in the field and in industry.

                            Features
                            • Extremely flexible industrial tablet for rough environments
                            • Powerful quad core processor for high working speed
                            • Replaceable battery with long life
                            • Rugged due to military specifications in accordance with MIL-STD-810G
                            • Integrated Bluetooth, WLAN and GPS
                            • Optional WWAN 3.75G (data transmission only)
                            • Optional scanning of RFID HF tags
                            • Low weight
                            • Wide range of accessories
                        • Smartphones & Mobile Camera Systems

                            • Impact X Intrinsically Safe Smartphone

                            • The BARTEC PIXAVI Impact X is the toughest smartphone you will ever meet. This intrinsically safe smartphone has all the functionality you will expect from a regular smartphone. The ATEX and IECEx certification has not compromised the quality and usability. The device is explosion proof and rated for use in hazardous areas. The Impact X is the next generation wireless video communication technology from BARTEC PIXAVI.

                              The Impact X intrinsically safe smartphone is a very powerful product, both on the inside and on the outside. It has the latest processors and software.

                              Rugged, waterproof, lightweight aluminum chassis, as well as ATEX and IECEx Zone 1 certification makes it the most versatile smartphone ever built.

                              • HD video streaming
                              • High end imaging
                              • Glove compatible
                              • Double battery capacity
                              • ATEX and IECEx
                              • Rugged, IP 68
                              • Android 4.2.2 Jelly Bean
                            • Gravity X Instrinsically Safe Camera

                            • Do you need a user friendly point and shoot HD camera when you work in hazardous areas? This intrinsically safe digital camera is designed to help you take high quality images where no other cameras are allowed.

                              The Gravity X intrinsically safe camera is ATEX and IECEx Zone 1 and Zone 2, as well as CSA Class 1, Zone 1 (for US and Canada). The Gravity X also has 8 Mpix HD image sensors, a powerful LED light as well as sunlight readable display, Glove compatible touch and HD video recording capabilities.

                              • Three HD cameras
                              • Powerful LED light
                              • Glove Compatible
                              • Light & user friendly
                              • Use in low light/darkness
                              • Easy media transfer to PC
                              • Dedicated camera button
                              • View media instantly
                            • Orbit X - Explosionproof Wi-Fi Camera

                            • The Orbit X is the toughest, smartest and smallest IECEx and ATEX Zone 1 explosion-proof camera.

                              The camera has a HD imaging sensor, two LED lights and laser pointer fitted into an extremely compact form. This enables the user to capture images and videos as well as conduct live video conferencing and CCTV type video streaming sessions wirelessly in any hazardous area.

                              Applicatons:
                              • Remote diagnostics
                              • Tele buddy mode
                              • Inspection and maintenance
                              • Surveillance

                              Features
                              • HD video streaming
                              • High end imaging
                              • Light and flexible
                              • Powerful LED
                              • Make better decisions
                              • Increase flexibility
                              • Decrease travel expenses
                              • Improve work routines
                          • Mobile Computers

                              • Mobile Computer Configuration Tool

                              • BARTEC offers its customers more than 2,000 possibilities for the individual configuration of explosion-protected mobile computers. The devices which have been developed in co-operation with Zebra Technologies are equipped with distinguishing features like its ergonomics, user-friendliness and high performance. The applications include the pharmaceutical, petrochemical and automotive industry as well as the food and beverage industry. The ruggedized mobile computers are available with different certifications.

                                The BARTEC mobile computer configuration tool provides you with the possibility to choose between a broad variety of criteria. Just click here and enter the requested options: you get the order number for your suitable mobile computer and further information. Thus, each user finds the right device!
                              • Lumen X4

                              • Lumen X4 from BARTEC is an extremely light, rugged and highly flexible industrial mobile computer for rough environments.

                                Lumen X4 has a large number of international certifications and can be used throughout the world. It is approved for ATEX and IECEx Zone 2/22 and for CSA Class I Div. 2. Approvals for other countries are possible on customer request.

                                Thanks to its numerous functions, the Lumen X4 provides perfect support for warehouse management, transport, service technicians, operating personnel, engineers and project managers in the field and in industry.

                                Features
                                • Extremely flexible industrial mobile computer for rough environments
                                • Powerful quad core processor for high working speed
                                • Replaceable battery with long life
                                • Rugged due to military specifications in accordance with MIL-STD-810G
                                • Integrated Bluetooth, WLAN, 3.75G and NFC
                                • Integrated 8 MP camera
                                • Optional barcode scanning with 1D/2D imager
                                • Optional scanning of RFID HF tags
                                • Low weight
                                • Wide range of accessories
                              • Mobile Computer MC 92N0ex

                              • This unique idea enables a combination of stateof-the-art technologies and so it was possible to integrate barcode data capture and RFID technology in this one device. Thanks to the modular keyboard and colour display, the data can be processed directly on the mobile computer. The data is transmitted to other corporate divisions via WLAN or Bluetooth. This means that the data is available in real time for further processing.

                                The software we offer for individual application development is an open source demo version and an SDK file. The SDK file is available for the C# programming language and contains all necessary resources for specific application development. On the one hand, the open source demo serves to demonstrate the reading and writing of RFID tags; on the other hand, it offers application developers a good basis for customised reader programming. The MC 92N0ex-IS can be retrofitted with the RFID option in the factory. It cannot be retrofitted by the customer himself.
                              • Mobile Computer MC 959xex

                              • The MC 959xex-NI offers the characteristic features of the robust MC 9090ex mobile computer series and numerous new capabilities in addition. These were modified specially by BARTEC for use in ATEX Zone 2 and 22 hazardous areas. The result is a device which sets new standards both in technology and in design: it is an innovative product with an unsurpassed selection of functions which take mobile computing innovation to a completely new level.

                                The MC 959xex-NI offers a more robust design, extended options for data capture, more intelligent functions, greater processing power and better ergonomics. Thanks to the ergonomically mounted scan triggers on the MC 959xex-NI, data can be captured easily in one-hand operation. Several technologies are available for data communication with other systems and company divisions.
                                • Wireless WAN (WWAN)
                                • Wireless LAN (WLAN)
                                • Wireless PAN (WPAN) (Bluetooth)
                                • IrDA connection

                                These modules, which are integrated in the device, allow a seamless transmission of voice and data and are easy to integrate into the company’s network.
                              • Barcode Scanner

                              • The sturdy radio hand-held scanner BCS 160ex BT from BARTEC offers all the highly developed ergonomic and functional features required in industrial applications. The scan line is wider than in conventional laser scanners and therefore easier to see. This makes aiming at the barcode much easier – even on hard-to-access objects. Its high scanning and decoding frequency of 500 Hz enables easy scanning of a large number of barcodes in quick succession. The BCS 160ex BT has a robust enclosure that can withstand use even in the toughest conditions. Even dropping onto the ground several times from a height of 2 m will not damage this scanner.

                                Design
                                The Radio hand-held scanner BCS 160ex BT with integrated decoder is designed for wireless data capture in real time and ensures a highly efficient operation in manufacturing halls, warehouses and other sites. When capturing data, the user can move freely up to a radius of 30 m around the base station. The Radio hand-held scanner BCS 160ex BT is produced with the “intrinsically safe“ type of protection and can be used directly in hazardous areas Zone 1, 2 and Zone 21, 22.

                                Base station
                                The base station is the charging station (cradle) and also serves as a radio receiver station and can be installed in either hazardous or non-hazardous areas. The RS232 or USB cable enables a connection to all standard hosts.
                            • Communications

                                • BARTEC VODEC Communications

                                • BARTEC VODEC supplies a range of systems and products for use in the offshore and onshore petrochemical industry including:
                                  • P3 Public Address and General Alarm [PAGA] Systems
                                  • P3 Exp Purged Public Address & General Alarm [PAGA Exp] Systems
                                  • P3 Page-Party-PABX Two Way Communications Systems
                                  • DX3+ Driller's Intercom Systems
                                  • Certified field equipment including explosion proof loudspeakers, explosion proof flashing beacons, explosion proof junction boxes, high performance acoustic hoods & booths
                                  • Explosion Proof, Marine & Industrial Flashing Beacons

                                  BARTEC VODEC equipment is designed to facilitate cost-effective, simple installation and uses non-critical, non-specialist field cabling.
                                  The extensive use of "surface-mount" construction technology guarantees stable, predictable, performance; ensures long trouble free operating life, minimizes weight/space requirements and reduces through-life costs.
                                  BARTEC VODEC supplies systems and products on a worldwide basis, and is able to provide packages to client specification which include project management, acoustic responsibility, commissioning and site support.
                                  Our mission is to supply quality technologically advanced telecommunication solutions delivered on time that are reliable, easy to commission and maintain, simple to operate and represent excellent value for money.
                                    • Public Address & General Alarm Systems

                                    • BARTEC VODEC design, manufactures, supplies and commissions Public Address and General Alarm Systems [PAGA] specifically for aggressive industrial situations where reliable operation is required in climatic extremes and/or potentially explosive atmospheres. For additionally hazardous applications we supply a P3 Exp package which incorporates fail safe EExp pressurisation where the cabinets are automatically purged with "clean" air, thereby preventing ingress of potentially flammable mixtures and consequent ignition risk.
                                    • Driller's Intercom Systems

                                    • DX3+ Handsfree Intercom System for Drilling Rigs

                                      The BARTEC VODEC DX3+1 Driller’s Intercom System has been specifically designed in conjunction with drilling operations to provide reliable, simple two way voice communications on board a drilling rig. All stations are hands free with priority control from the driller position eliminating troublesome VOX switches and unreliable keypad controls.

                                      The system is primarily designed to enhance health and safety on board the rig and is developed to the same high standards of security as the Vodec P3 Public Address and General Alarm (PAGA) System which is a prime life safety package.

                                      The DX3+1 system comprises of a central panel, (which carries switching and amplification) Driller’s cabin master control, subscriber station(s) and paging loudspeaker(s).
                                    • Page/Party Communication Systems

                                    • BARTEC VODEC P3-VXS Page Party System

                                      BARTEC VODEC design, manufactures, supplies and commissions Page Party Systems specifically for aggressive industrial situations where reliable operation is required in climatic extremes and/or potentially explosive atmospheres.

                                      Single Button Paging, no dial up codes to address public address loudspeakers
                                      Integrated Party/PABX multi channel selective point to point and open party line communications
                                      Modern design eliminates rotary switches
                                      No multi core or special cable required, uses standard instrumentation/telecom cable

                                      BARTEC VODEC P3-VXS Page/Party System can be easily extended to incorporate full system diagnostics and alarm tone distribution by integrating BARTEC VODEC P3-VX/AT PAGA Public address and alarm broadcast package.
                                    • Acoustic Hoods & Booths

                                    • BARTEC VODEC has developed a range of acoustic shelters specifically designed for aggressive industrial situations where high ambient noise inhibits effective two-way speech.

                                      Both Eliminator VE10 and VE100 feature high performance acoustic inner liner. Acoustic matting represents a major improvement on conventional rock wool/mesh fabrications, which have limited performance, require specialised health and safety handling during manufacture and are much heavier. BARTEC VODEC inner line is fire retardant to class 0, complies with BS476 and is effective over a wide temperature range. BARTEC VODEC inner line is highly stable, unaffected by sunlight and rot proof.

                                      The Eliminator range of extremely robust acoustic hoods is designed to facilitate reliable two-way speech communications in high ambient noise conditions. The Eliminator is manufactured from rot/vandal resistant glass reinforced polyester, which requires no routine maintenance and is light in weight.

                                      Eliminator hoods are resistant to chemical spillage/vapours and are fire retardant. Glass reinforced polyester is an extremely strong material, consequently the BARTEC VODEC Eliminator unit is much more robust than traditional metal fabrications and will provide long trouble free service in the most severe of climatic conditions. The Eliminator range includes a choice of background noise attenuation performance depending upon application. Use of an Eliminator not only provides improved intelligibility of communications but also provides shelter for both user and equipment.
                                    • Flashing Beacons

                                    • Explosion Proof, Marine & Industrial Flashing Beacons

                                      BARTEC VODEC flashing beacons provide secure, efficient, reliable visual annuciation of alarm conditions in high noise areas. The range includes rugged weatherpoof varients that enable operation in aggressive industrial environments as well as highly saliferous marine applications.

                                      Zone 1 ATEX certified flashing beacons enable safe operation in potentially explosive atmospheres and use of xenon gas dischage tube light sources eliminate mechanical/moving parts enabling long trouble free life.
                                  • Control and Connection Equipment

                                      • ComEx Control Stations

                                          • Actuating elements

                                          • A large number of variants and versions of actuating elements are available for the ComEx control and indicator units. All actuating elements are made of high-quality thermoplastic and conform to the IP 66/IP 67 type of protection.

                                            To complete the actuating elements, there are useful accessories such as e. g. label holders, marking tags, metal shroud or nut wrench. Actuating elements for increased resistance to oil are available too.

                                            The actuating elements are mounted quickly and easily onto the ComEx control and indicating devices. Use in Zone 1 and 21 is certified.
                                          • Modules with Terminals for Rail-mounted Installation

                                          • The ComEx lamp module signals command statuses by illuminating or extinguishing a light signal. It is suitable for use in almost all potentially explosive areas in which the functional status of machinery needs to be visibly displayed The lamp modules are executed according to the requirements of type of protection “e increased safety” and “d flameproof enclosure”. The lamp module can be combined with various lamp module actuators. A junction box is provided for the safe and convenient installation of the module in a control panel. Conductors are connected using terminals with increased safety on the back of the module. The simple installation of the lamp module actuators without tools guarantees the high IP protection type.
                                          • Modules for Local Control Stations

                                          • The ComExflex lamp module indicates command modes by means of a light signal lighting up or going out. It is suitable for use in almost all explosive areas in which a visual indication of a machine’s functional status is required.

                                            The lamp module can be combined with various lamp module actuating elements. A junction box is available to facilitate a safe and convenient installation of the module into a control panel.

                                            The conductors are connected by means of terminals on the back of the module which have an increased safety level. The lamp module actuating elements can be fitted easily without tools, which ensures conformance to the high IP degree of protection.
                                          • Switch Modules with Connection Cable for Installation on Panel

                                          • The ComExflex switch module is used in almost all hazardous areas where machine functions are activated by means of a button or a switch.

                                            The ComExflex is flexible and in addition to a large number of actuating elements it offers a junction box to facilitate a safe and convenient installation of the module into a control panel. All contacts in the switch modules are self-cleaning and the opening contacts have positive opening operation.

                                            The conductors are connected by means of terminals on the back of the module which have an increased safety level. The easy installation of the actuating elements without tools ensures conformance to the high IP degree of protection.
                                          • ComEx Control Stations Complete Devices

                                          • ComEx is a flexible system offering standard as well as customer-specific local control and indicating units.

                                            You have the choice between three standard enclosures which can accomodate up to three different control and indicating devices. Combinations of up to three ComEx enclosures are possible.

                                            Either stuffing box glands in M20 x 1.5 and M25 x 1.5 made of plastic or cable glands made of metal are available for the electrical connection. The plastic glands require no lock nuts. Metal glands are screwed into a metal earth plate sheet inside of the enclosure. Maximum amount of cable clands: two off M20.

                                            To ensure easier operation on site, each enclosure can be equipped with an individual info-label. For offshore applications special oil-resistant attachments are available.
                                        • Control Panels

                                            • Local Control Stations

                                            • BARTEC produces local control stations for use in areas with flammable gases and dusts. Depending on the application area, the control stations are designed
                                              with the type of protection “Increased safety” or “Protection by enclosure”.

                                              The explosion-protected local control stations are available in aluminium, polyester or stainless steel. When selecting the version, you can choose between a cabinet with door and an enclosure with screw cover. Control, signalling and display devices and remote I/O systems are installed according to customer specifications. The installation of industrial standard equipment in controls for Zone 21, type of protection tb “Protection by enclosure” is possible.

                                              The control elements can also be mounted on a mounting rail or in the front wall. Free installationa reas can be designated for the subsequent installation of BARTEC control and signalling devices, which are then sealed using blanking plugs. All explosion-protected local control stations are supplied prewired on terminals.
                                              Fields of application
                                              Chemical and petrochemical industry, process and plant engineering, pharmaceutical and food industry, OFF SHORE areas.
                                            • Limit Monitor

                                            • The limit value transmitters of Types 07-31..-.../... are deployed in conjunction with pneumatic actuators on valves and fittings. They serve to signal the "open/closed" status of a fitting. This end position is communicated by means of up to a maximum of 6 limit switches in the “Ex d” type of protection or by means of 6 proximity initiators in conformance to NAMUR in the “Ex i” type of protection. In intrinsically safe proximity initiators there is a choice of slot initiators or V3 initiators. The limit monitors are available in polyester, aluminium and stainless steel. The metal versions can be used in temperatures down to -60 °C – depending on the fitted components. To ensure mechanical adaptability to the pneumatic actuators, we supply 4 consoles according to VDI/VDE 3845. The BARTEC limit monitors can be used in hazardous (potentially explosive) areas in Zone 1 and 2 in accordance with the certified explosion sub-groups IIA, IIB and IIC and the temperature classes T5/T6 and in Zone 21 and 22 in accordance with the certified max. surface temperature.
                                            • Flameproof Control Panels

                                            • As flameproof control unit, this Ex d enclosure from BARTEC provides a compact solution for the installation of standard industrial products, whereby components such as contactors and relays are installed in a flameproof enclosure.

                                              The enclosure is light, flexible with respect to wiring systems, may be flange mounted and can be equipped with electrical or mechanical line bushings on the sides and in the lid. The different versions of lids enable the installation of display units or devices with control buttons. The installation of Ex i assemblies is also permitted.Types of connection:
                                              Flameproof control units may be connected either with direct cable entry by means of Ex d cable glands or indirectly using an Ex e junction box. The electrical connection between Ex d and Ex e area takes place using Ex d line bushings with terminals. Control devices and display units can be installed in the junction box.Note:
                                              The use of an empty enclosure requires an acceptance inspection by a notified body.
                                            • Control, Regulating and Display Devices

                                            • These up to 4 W potentionmeters show that Ex potentiometers can be small and compact. The external dimensions are approximately the same as those of standard industrial potentio-meter enclosures. Central fixing in a single hole and the standard size of shaft have been includend. From the variety of resistors on the market we have chosen cemented wire-wound resistors and carbon film resistors and developed a standard-program range.The metal Ex d enclosures are tailored to the dimensions of the resistors and feature a standard 30 mm diameter. The potentiometers have been designed so that the stated nominal capacities can be fully exploited at temperature class T6 or T5 and be deployed in zones 1 and 2. The potentiometer is fitted into an enclosure that meets the requirements of an approved type of protection in conformance to IEC/EN 60079-0.
                                            • Standard Motor Control

                                            • The standard motor controls consist of an enclosure in the “flameproof” type of protection and a junction box in the “increased safety” type of protection. The motor starters are fitted into the enclosure with the “flameproof enclosure” type of protection. Depending on the order, controls are fitted into the junction box with the “increased safety” type of protection.

                                              The motor control units are supplied with a main switch and controls as standard. The standard versions with control transformer conform to EN 60204
                                              requirements. However, it is also possible to order the motor controls without a control transformer, main switch or controls.

                                              The contactor for switching ohmic consumers and motor starters is equipped with thermal overcurrent tripping. The nominal voltage must be specified separately if it deviates from 400 V. The transformer is adapted accordingly then.
                                            • Contactor Ex d Ex

                                            • The Ex d contactor is used for the safe switching of currents greater than 5 A or for 3+N mains power supplies in hazardous areas.

                                              The contactor is activated by a pressurised system
                                              (e. g. SILAS control, APEX control).

                                              For this purpose it has four galvanically isolated switching contacts in a redundant version in the form of two switching contactors isolated from each other and connected in series. The four isolated switching contacts allow the connection of threephase consumers also.
                                          • Installation Systems

                                              • Plug-and-Socket

                                              • BARTEC’s plug-and-socket devices for areas in which an explosion hazard exists are particularly well-suited for use in raw atmospheres because of their high degree of IP protection and their resistance to chemicals. Their integrated switch function gives them the ability to switch overloads as per IEC/EN 60947-3 Cat. AC 22 or AC 23.Silver-plated butting contacts ensure a constant contact pressure with low transfer resistances.

                                                Plugs/couplers:
                                                The modular design of the plug-and-socket system allows both plugs and couplers to be supplied. They are supplied in unmounted state.

                                                Wall socket:
                                                BARTEC supplies both a fully certified wall socket and a socket with a 30° adapter to flange onto housings.

                                                Plug-and-socket devices from BARTEC are approved in accordance with the European directives not only for Zone 1 and 2, but also for Zone 21 and 22. Likewise for Class I Div. 2 Groups A, B, C, D and Class II Div. 2, Groups E, F, H in accordance with the American standards.
                                              • Enclosures and Distribution Boxes

                                              • Polyester enclosures have proven their worth in many industrial plants. They offer safe protection even when they are used under extremely unfavorable conditions, on exposure to aggressive chemical media or hard mechanical conditions.

                                                The inside base of the enclosure has at its sides, threaded bushings for the fastening of mounting rails or panels. The enclosure is mounted by means of insulated screws outside of the lid seal.
                                              • Terminals

                                              • The continuous demand for increased nominal insulation voltage and current carrying capacity in Ex e terminals made us these larger BARTEC terminal blocks.

                                                Terminals for 4 mm² and 16 mm² conductors are available in 2- and 3-pole versions. Terminals for 35 mm² conductors are available in a 3-pole version. The terminals can be fitted directly onto a metal base or onto a 10 x 5 mm mounting rail.
                                              • Cable Glands

                                              • The cable gland made of polyamide is used for inserting permanent cables and leads into electrical equipment with the increased safety “e“ type of explosion protection. The cable glands conform to the protection class IP 66/68.

                                                For intrinsically safe circuits the cable entries are available with a blue cap nut.

                                                When this cable gland is used, the instructions given in the type examination certificate/operating instructions must be observed.
                                            • Switches

                                                • Insert switch

                                                • This switching element can be universally used for switching, controlling and regulating operations within Ex-areas. The insert switch is audited by the PTB according to the latest EC guideline 94/9/EC. Devices equipped with these insert switches have to be approved by a testing authority, the switch itself needs not be retested. The cores are cast-in at the back of the switch. Their standard length is 500 mm; other lengths are available on request. To connect the cores we recommend the miniterminals from BARTEC.
                                                • Limit switch

                                                • The limit switches have been developed for Ex-areas where safe and reliable signalling is required, for example on pumps, petrol pumps, as well as in mechanical and high-tec engineering.

                                                  The switches must be mounted into the respective devices or systems in such a way as to guarantee mechanical protection. No further tests are required. The connection cable is cast in on the back of the switch. For the connection in Ex-areas BARTEC provides a large variety of terminals and terminal boxes.
                                                • Miniature limit switch

                                                • BARTEC miniature switches are used in areas with of limited space for a flameproof switching element. They are especially suitable for applications in valves, thermostats, push switches, servo components, level metres and switching gears. The smallest Ex d miniature switch in the world is encapsulated in a plastic enclosure. The leads or cable tail are potted in at the base. The standard version of the BARTEC miniature switches contains fine silver contacts. Other contact materials such as gold plated silver or solid gold are available for low currents and voltages.

                                                  Switches with connector cables have been approved by PTB with EC model test certification. The switches can therefore be mounted at any time into devices and systems which offer mechanical protection – no further testing is required. The connector cable is cast into the back of the switch. The wires are colour-coded. The (standard) cable length is 3 m; other lengths are available on request.
                                                • Miniature insert switch

                                                • BARTEC miniature switches are used in areas with of limited space for a flameproof switching element. They are especially suitable for applications in valves, thermostats, push switches, servo components, level metres and switching gears. The smallest Ex d miniature switch in the world is encapsulated in a plastic enclosure. The leads or cable tail are potted in at the base. The standard version of the BARTEC miniature switches contains fine silver contacts. Other contact materials such as gold plated silver or solid gold are available for low currents and voltages.

                                                  The insert switch with wires is available as a building block for your explosion-proofing solution. These insert switches are tested and approved by PTB (the Federal Physical-Technical Institute) according to Ex Guideline 94/9/EC. After installation, the complete device is tested by an authorized institution. Thanks to its PTB approval, the microswitch itself needs not be individually tested. The leads are individually marked. The length of the cable is 50 cm (standard). Other lengths can be supplied on request. For the connection of the cores we recommend our BARTEC Ex Mini-terminals.
                                                • Limit switch plastic encapsulated

                                                • Besides the metal-enclosed precision switch of the RET series, BARTEC also offers a series of limit switches with plastic bodies. The enclosure is made of shock impact resistant proof plastic providing an IP 65 protection class according to IEC/EN 60529. Due to its format several limit switches can be mounted in tandem formation requiring very little space. This allows a multiple triggering of switching operations. The connection cable is equipped with a strain relief device, prewired and safely cast into the enclosure by means of epoxy resin. We supply this robust limit switch with a standard length of 3 m; special lengths are available on request.

                                                  The integrated switching element changes over via NC contact with positive break operation. Operator protection corresponds the the GS-ET 15 requirements. Its high vibration resistance and long life are the result of a most extensive laboratory research. The certification for hazardous areas and the high protection class granted thanks to its structural characteristics are the ideal prerequisites for its use in almost all fields of automation, mechanical and high-tec engineering.
                                                • Limit switch metal encapsulated

                                                • Limit switches of the RET range are metalencapsulated precision switches with a robust and compact explosion-proof structures.

                                                  Our connection cable comes prewired, is equipped with a strain-relief device and safely cast into the enclosure.

                                                  We supply this robust limit switch with a standard cable length of three meter. Special cable lengths and switches with lateral cable outlets are available on request. The integrated basic switch has a single-pole changeover contact with high switching accuracy and a precise repeatability of the switching point.

                                                  Its high vibration resistance and long mechanical life are the result of extensive laboratory tests. The high protection class, IP 67, allows the switch to be used in nearly all fields of automation, mechanical and high-tec engineering.
                                                • Position switch thermoplastic

                                                • Position switches are used wherever movable parts on machinery and systems have to be positioned, controlled and monitored.

                                                  They control and facilitate signalling in switching gear or function as switches in regulating and control devices.

                                                  The flameproof encapsulated BARTEC position switches can be used in hazardous (potentially explosive) areas in Zones 1 and 2 in accordance with the certified explosion subgroups IIA, IIB and IIC and the temperature class T6 and in Zones 21 and 22 according to the certified maximum surface temperature.
                                                • Position switch Aluminium

                                                • All dimensions and actuating elements of the Ex d position switch correspond to the DIN EN 50041 standard.

                                                  Its 30 x 60 mm mounting dimensions make the switch directly compatible to the position switch corresponding to the same DIN standard. The switch is equipped with snap-action contacts with several switching element versions. A microswitch with connection cable Type 07-2511 is mounted as switching element.

                                                  Different actuators are available for the variety of actuating possibilities. After the removal of four screws these knobs can be rotated by 90 °C allowing so four different directions of actuation. Gold-plated or gold-nickel contacts are available for the switching of low currents of voltages.

                                                  Standard length of the connection cables are 3 m. BARTEC has designed a very extensive range of Ex e terminal boxes of polyester and aluminium for the connection of the position switch within the Ex area.
                                              • Cable Entries, Line Bushings

                                                  • Line bushings

                                                  • A line bushing is a component for the electrical connection between a flameproof “d“ enclosure and an increased safety “e“ terminal box. The bushing consists of a threaded or non-threaded metal sleeve encapsulating one or more cores providing a flameproof barrier. The lengths of these leads vary according to their applications. The depth of engagement of the threaded sleeves and the joint length of the cylindrical sleeve in the wall of the “d“ enclosure must correspond to the EN 60079-0 and EN 60079-1 standards. After installation the bushing must be protected against rotation and accidental loosening. Recommendations are given under “Accessories“. Our standard bushings come with threaded sleeves from M10 to M48 or with cylindrical sleeves. They are equipped with cores with a 0.2 to 95 mm2 csa. and approved for nominal voltages between 250 V and 3 000 V. See also table “Electrical data“.

                                                    For the connection of intrinsically safe circuits in the “d“ area with the terminal strip in the connection compartment we provide line bushings with blue cores for “i“ low power circuits.
                                                  • Bushing conductor studs 690, 1000 and 1600 Volt

                                                  • A bushing conductor stud is a component with which the electrical connection between an enclosure in type of protection “Flameproof enclosure d“ and its connection enclosure in type of protection “Increased Safety e“ is established. The cable bushing includes a threaded metal sleeve, a ceramic insulation, terminals and a stud. Standard threaded sleeves from M16 to M42 are included in the delivery of bushing conductor studs.

                                                    The diameter of the stud depends on current and the terminal size on the cable diameter. Thanks to different types of terminals, vertical as well as horizontal cable connection is possible. Special terminals are available on request. After installation, the bushing conductor stud needs to be secured by means of a nut or adhesive to prevent self-loosening.
                                                  • Optical fibre bushings

                                                  • The optical fibre bushing is used as an optical fibre cable entry into flameproof enclosures located in hazardous areas. They can also be supplied with plug-in connectors.

                                                    The optical waveguiders - also known as fibres - are made of glass and resist to mechanical, climatic, chemical and electromagnetic influences. The optical waveguide is most commonly used for carrying signals in the form of electromagnetic waves in the frequency range of visible light.

                                                    The type and structure of the cable determines its transmission properties.
                                                  • Electrode line bushing explosion-proof and pressure-sealed

                                                  • Waste water pumps can be fully submergible units. The pump assembly and motor are often separated from each other by an oil fore-chamber sealed by mechanical seals. Any leaks in the shaft seals need to be registered in order to prevent malfunctions or failure of the motor and to arrange for inspections in good time.

                                                    BARTEC’s electrode line bushings Ex + sealed allow signals to be reliably transmitted through the walls of pressure-proof enclosed operating equipment, even in areas in which an explosion hazard exists. Only electrical circuits certified as intrinsically safe may be connected to the electrode line bushing.
                                                  • Bushing explosion-proof and pressure-sealed

                                                  • The 07-96..-.. type series II 1G line bushing serves as a gas diffusion-proof isolation element for zone 0 (1G/2G) while simultaneously providing an electric connection for leads:

                                                    between flameproof enclosures
                                                    between flameproof enclosures and enclosures with another approved type of protection Category II 2 G
                                                    flameproof enclosures and protected installations Category II 3 G or
                                                    in the safe area

                                                    The core piece of this gas diffusion-proof leadthrough is a metal plate in which the stud-type bushings are insulated with glass. The electrical connection on both sides of the lead-through can be set forth with metal duct bolts, cable wires or hose lines as required. This connecting area is, or can additionally be, cast with a poured resin. The connector studs, connecting wires or the hose line of the line bushing II 1G must be connected in enclosures which conform to a type of protection standardised according to DIN EN 60079-0. The lead-through is compliant with the pertinent DIN EN 60079-0, DIN EN 60079-1 and DIN EN 60079-7 and DIN EN 60079-26 standards.
                                                  • Cable entries

                                                  • Flameproof Ex d cable entries are elements which allow electrical cables to be introduced into an Ex d enclosure, without danger of explosion. The additional Ex e terminal housing is not required. A main distribution box may by used or the connections can be made outside the Ex-zone. The cable entry consists of a threaded metal sleeve, in which a sheathed cable is anchored and encapsulated. The individual cores are then connected directly inside the flameproof enclosure. The length of cores and cables are customer-tailored. All cables come with standard green-yellow earth leads. The length of engaged thread between the sleeve and the flameproof “d“ enclosure must comply with DIN EN 60079-0: 2006 and DIN EN 60079-1.
                                                  • Flameproof Enclosures

                                                  • The TNDLDF range of fibre optic line bushings are designed as components for use in all Ex de enclosures to pass connection between the Ex d and Ex e compartment in combination Ex de enclosures.

                                                    The TNDLDF is manufactured to order and can accommodate multiple fibre cores or a combination or fibre, wire conductor and coaxial cables.
                                                • Signalling Devices

                                                    • Ex de Flashing lamp 15 J

                                                    • Plant and machinery are fitted with visual alarms to give timely warning of dangerous situations and to enable machinery to be shut down before damage occurs. BARTEC flashing lamps are designed for continuous operation. The LED flashing lamp can be set on 4 different modes: flashing, flash, permanent and rotating light. BARTEC’s flashing lamps provide information, warnings and alarms on machinery and plant in explosion-endangered areas in Zone 1 and Zone 2, Zone 21 and 22.
                                                      Function:
                                                      The flashing lamp is made of an aluminium Ex d enclosure with a dome made of Borosilikal glass. The connection compartment was designed in the “increased safety“ type of protection in conformance to EN 60079-7. An M20 x 1.5 gland is available to facilitate the insertion of the cable.
                                                    • Flameproof Flashing Lights

                                                    • BARTEC TECHNOR’s flashing beacon is an efficient solution for use in Ex-zones offshore as well as onshore, and have more than 25 years been supplied for the demanding environments in the North Sea.
                                                      TNFCD flashing lights are available as Ex de, Ex d or as non-Ex. TNFCDM as Ex d only. They can be delivered for direct operation, TNFCD also for several types of separate triggering, and they can be supplied with an siren card for acoustic warning.

                                                      Applications
                                                      BARTEC TECHNOR’s flashing lights are ideal for Petrochemical and Marine applications, and for all kind of industry where an explosive atmosphere may be present and the need for warning is required.
                                                      Special applications may be delivered upon request.
                                                    • Ex signal horn

                                                    • Machines and equipment are provided with acoustic warning and emergency devices for the protection of people and the environment. These devices signal hazardous situations and thus allow for instant safety measures to be taken.

                                                      BARTEC provides a loud signal horn with continous tone in attractive design.

                                                      The device is suitable for applications in potentially explosive gas and dust atmospheres without further accessories.

                                                      The signal horn reliably warns against hazards in a wide temperature range of -40 °C up to +50 °C outdoors and indoors.
                                                    • EXguard™ Mobile Gas Detection

                                                    • The TN2000-5 is a further development of our EXguard™ System, which is designed for use on refineries and onshore plants. The TN2000-5 EXguard™ System is especially designed for use during hot work operation for onshore and offshore installations for detection, alarm and shutdown in case explosive gases are present.

                                                      The EXguard™ System consists of:
                                                      • TN2000-5, Main Control Unit (MCU)
                                                      • GD01 – GD05 Gas Detectors (GD)
                                                      • TN2000-5A, Power Control Unit (PCU) (Optional)
                                                    • EXcite™ Flashing Beacon BB125

                                                    • BB125 Ex flashing beacon is designed according to ATEX and IECEx standard. This product is certified for use and installation in Zone 1 and Zone 2 areas with gas groups IIA, IIB, IIC and temperature class T4-T6. It especially applies to Oil & Gas, Offshore Platforms, Chemical, Petrochemical, Refinery and Marine Industries.

                                                      It has telephone initiated function (optional) and can be used as the second ring output indicator of industrial telephones which apply to special locations where the environment is noisy. Various colors are selectable for lens cover.
                                                    • EXcite™ Manual Call Point BCP125

                                                    • BCP125 Ex Manual Call Point is designed according to ATEX and IECEx standards. It especially applies to Oil & Gas, Chemical, Petrochemical, Refinery, Marine and Offshore Industries for the high-corrosion and hazardous areas.

                                                      It is compatible with PLC, DCS and ESD system with 4-20 mA output. It is ideal to be used as an ex Manual Call Point for Fire Alarm System with Addressable Module fixed. The design of two LED indicators (Green and/or Red) is unique. During normal operation, the Green LED is on. When device fault or alarm status arises, the Green LED will be cut off and Red LED will be on. We provide colors of Red (RAL3001), Yellow (RAL1003) and Blue (RAL5005) for customer’s selection.
                                                    • EXcite™ Sounder / Horn BH125

                                                    • BH125 Ex Sounder/Horn is designed according to ATEX and IECEx standards. It especially applies to Oil & Gas, Chemical, Petrochemical, Refinery, Marine and Offshore Industries for the high-corrosion and hazardous areas.

                                                      According to user control system, 3 stages of alarm tones can be sent out, from less critical stage (stage 1) to the most critical stage (stage 3). Every stage tone can be selected separately. 63 tones are available. Users can record sounds or customize sounds into the sounder by using 4 spare tones. Tones can be preset during installation.
                                                    • EXcite™ Multi Way Combination Unit BHB125-X

                                                    • BHB125-X Multi Way Combination Unit is designed according to ATEX and IECEx standards. This product is certified for use and installation in Zone 1 and Zone 2 areas with gas groups IIA, IIB, IIC and temperature class T4-T6. It especially applies to Oil & Gas, Offshore Platforms, Chemical, Petrochemical, Refinery and Marine Industries for hazardous areas. The combined unit has 3 stages of alarm output. 63 tones are selectable. It has telephone initiated function and can be used as the second ring output and indicator of industrial telephones which apply to special location where the environment is noisy on the engineering site.

                                                      The design of the combination with a push button is unique. Sounder mute or on-site activation functions can be achieved by combining the push button. When the button is pushed down, sounder will mute or the whole unit will be activated. The functions are very considerate for the operations of the field service people to do the routine testing, maintenance or repairment no matter they want to activate and test the unit on site directly without the assistance of the control room or they need to communicate with the control room by voice in a quiet environment. The mute or activation can be lasted from 30 seconds to 30 minutes with preset by the manufacture upon customer’s request. The factor y setting is 2 minutes. The push button is self reset type. The unit will be recovered automatically after the mute or activation duration.
                                                    • EXcite™ Explosion Proof Junction Box BJB125

                                                    • BJB125 Ex Junction Box is designed according to ATEX and IEXEx standards.

                                                      It especially applies to Oil & Gas, Chemical, Petrochemical, Refinery, Marine and Offshore Industries for the high-corrosion and hazardous areas.
                                                    • EXcite™ Push Button BPB125

                                                    • BPB125 Ex Push Button is designed according to ATEX and IECEx standards. It especially applies to Oil & Gas, Chemical, Petrochemical, Refinery, Marine and Offshore Industries for the high-corrosion and hazardous areas. It is compatible with PLC, DCS and ESD system with 4-20 mA output. It is ideal to be used as an Ex Manual Call Point for Fire Alarm System with addressable module fixed.

                                                      The design of two LED indicators (Green and/or Red) is unique. During normal operation, the Green LED is on. When device fault or alarm status arises, the green LED will be cut off and red LED will be on. The product finish is power coating with strong adhesion. We provide colors of Red (RAL3001), Yellow (RAL1003) and Blue (RAL5005) for customer’s selection.
                                                    • EXcite™ Status Lights BSL125

                                                    • BSL125 series Ex status lights is designed according to ATEX and IECEx standards. This product certified for use and installation in Zone 1 and Zone 2 areas with gas groups IIA, IIB, IIC and temperature class T4-T6. It specially applies to Oil & Gas, Offshore Platforms, Chemical, Petrochemical, Refineries and Marine Industries.

                                                      The BARTEC TECHNOR range of Ex status lights can be configured for use as a combination of visual status lights using LED or Xenon beacons with the flexibility of adding junction boxes and manual call points. Three working status-flash, rotary and steady are available (LED Beacon & Light). Different flash or rotary rate can be adjusted. Working status type and flash/rotary rate are preset during installation. Junction box (BJB125) or push button (BPB125) can also be combined with BSL125 unit. BSL125 can also be customized to be telephone initiated to company with Ex-telephone in communication systems.
                                                  • Lighting Technology

                                                      • Lighting

                                                      • TNXCX, Flameproof Xenon Floodlight

                                                        BARTEC TECHNOR’s low profile floodlights in stainless steel 316L were developed to withstand the harshest offshore environments, while designed to provide safe, powerful illumination with no glare (e.g. to pilots or crew).

                                                        Stainless steel 316L enclosure and high quality internal electronics provides a reliable and long lifetime light source to ensure maintenance is kept to a minimum.
                                                      • Lighting TNCLS

                                                      • BARTEC TECHNOR’s Backlight for Level Gauges is based on the use of LED technology.

                                                        The Backlight is easy to install, and may be adapted to most types of Level Gauges. Additionally, it has a very long lifetime, and the power consumption is low. The equipment is maintenance free.
                                                        Applications
                                                        The range of TNCLS Backlights are designed to meet all kinds of industry where Level Gauges are installed, and an explosive atmosphere may be present.
                                                      • LEUTEX series Ex d Fluorescent Lighting Fixtures

                                                        • Housing in copper free aluminium casting
                                                        • Very light and solid polycarbonate
                                                        • Diffuser with high impact resistance, also available in borosilicate glass
                                                        • Stainless steel fixings (i.e. screws)
                                                        • Screwed side lid with neoprene gasket
                                                        • RAL‐1003 yellow anticorrosive
                                                        • Paint with polyurethanes
                                                        • Provided with standard internal components,
                                                        • lamps included
                                                        • Electronic ballast
                                                        • LED technology version available
                                                        • Sliding mounting plate in white color used as reflector
                                                    • Heating Technology

                                                        • Heating Systems

                                                        • Industrial Electrical Heating for Use in Ex Areas

                                                          The different BARTEC heating systems and technology can be used for all variations of electrical heating applications.
                                                          Systems with Self-limiting Parallel Heating Tapes

                                                          BARTEC offers self-limiting parallel heating tapes of types PSBL, PSB, MSB, HSB and HTSB and combinations with connection and termination equipment for various needs of electrical heating applications. The system certificate (ATEX, IECEx, CSA, ...) shows the designer and end user the combinations, operation limits and suitable explosion safety marking for the use of the selected electrical heating system. The BARTEC heating systems have type examination for EN/IEC 60079.
                                                          Systems with Single Core Heating Cables

                                                          BARTEC offers single core heating cables of types EKL and EMK and combinations with connection equipment for various needs of electrical heating applications. The system certificate (ATEX, IEC Ex, ...) shows the designer and end user the combinations, operation limits and suitable explosion safety marking for the use of the selected electrical heating system. The BARTEC heating systems have type examination for EN/IEC 60079. The application is typically designed and engineered to the plant requirements.
                                                          Systems for Long and Wide Dimensions

                                                          BARTEC offers for long transfer pipelines, platforms and tanks the optimal solution with the least number of feeding points, The BARTEC SEH Skin Effekt Heating System allows the use of only one power supply by means of a high voltage transformer up to 5000V (at max. 180A). The application is BARTEC designed and engineered to the plant requirements.
                                                          System for Heating of Offshore Pipelines

                                                          BARTEC offers for offshore pipelines to be heated the Deep Sea Star® (DSS).
                                                          The Deep Sea Star® prevents the emergence of wax and hydrate formations. The rated voltage of up to 5000 V allows heating circuit lengths of 20000 m using only one feeding point. The quality of the Deep Sea Star® has been confirmed by Sira in accordance with the international standards IEE 844-200 and IEC 60079-30-1.
                                                            • Heating Components Industry

                                                                • Heating Tapes and Cables

                                                                • Around two parallel positioned copper wires with a cross-section of 1 mm² an irradiated electrically conducting polymer is extruded.

                                                                  This electrically conducting matrix responds to changes of the ambient temperature with an increase or decrease of the heating output. A flame-retardant, UV-resistant jacket protects the braiding against humidity and offers additional protection against mechanical stress.

                                                                  The heating system must be designed to ensure that the maximum operating temperature of 65 °C will not be exceeded when it is energized. When it is switched off, the heating tape can be exposed to a temperature of 85 °C, not more than 1,000 hours cumulated.
                                                                • Connection Technology

                                                                • The PLEXO TCS connection system can be used for BARTEC self-limiting heating tapes. This modular connection technology allows an easy and reliable assembly of supply connections, splicing and remote-end terminations. PLEXO TCS is plugged and built up with a patented sealing and clamping technology.

                                                                  Maintenance work and later modifications on the heating circuit can be done quick and flexible. The strands from the heating tape or the supply cable are fixed in place securely by spring-loaded terminals in the internal clamping technology.
                                                                • Control Units

                                                                • The MPC II Standard is the ideal solution for compact control cabinets and can regulate up to 8 heating circuits.

                                                                  The inputs have been preconfigured completely and each is permanently assigned to one output.

                                                                  Thanks to the easy-start function, it can be put into operation as soon as the temperature setpoints and alarm values have been entered.

                                                                  Alternatively, the inputs and outputs can be programmed on site by means of the clearly organised and user-friendly control menu.
                                                                • Heaters

                                                                • The Mini-heater protects from frost and prevents the formation of condensation water inside enclosures and small electrical control panels. The explosion-proof version can be mounted in Ex-enclosures according to EN 60079-7.
                                                                  Structure
                                                                  A heating resistor is flameproof encapsulated in an anodised aluminium enclosure. The terminal leads integrated on both sides make the device a ready-to-connect heater. The heater is mounted by means of two fixing holes of ∅ 3.2 mm. A heater of similar dimensions and power output is available for use in safe areas. This version is supplied without the earth connection.
                                                                  Function
                                                                  The Mini-heater can be used without a temperature limiter in hazardous areas providing the installation instructions are carefully adhered to. Attaching the Mini-heater to a metal body can reduce the surface temperature.
                                                              • Heating Components Domestic

                                                              • BARTEC designs, manufactures and supplies heating components and systems for the following application areas:

                                                                • protection against freezing
                                                                • maintaining constant temperatures
                                                                • process heating

                                                                Innovative heating cable, connection and control systems ensure efficient and reliable heating. The BARTEC components and systems are suitable for use in buildings and industrial plants.
                                                                Please click here for detailed information on the product portfolio.
                                                                  • Water Detection

                                                                  • Leak control in buildings with electronic devices or other valuables is an elementary part in housing surveillance and protection.

                                                                    Undetected leaks may cause substantial damage:
                                                                    • Damage to plant and equipment
                                                                    • Health risk to personnel
                                                                    • Increased fire risk
                                                                    • Environment pollution
                                                                    • Lost of product