• Offer Profile
  • Welcome to REIFF Technische Produkte

    As an initial equipment and equipment supply requirements partner REIFF Technische Produkte demonstrates its expertise, not only with more than 140,000 standard products, but in further processing and providing entire assemblies.

    In addition to modern logistics we convince via maximum merchandise availability, expeditious information and uncompromising quality consciousness. Rely on our service!

    REIFF provides you a comprehensive service solution.
    From design to delivery you are well advised at REIFF
Product Portfolio
  • Drive Technology

      • Antifriction Bearings

      • Quality and perfection - we work with the most reputable vendors in the marketplace. REIFF Technische Produkte is an authorised dealer for INA, SKF and Federal Mogul.
        Whether you decide on high-tech or low-budget products – we know the ideal products for your requirements and can generally supply them right from our warehouse
      • Linear technology

      • In the linear centre, we provide a range of machining options for you: cutting to length, bores, grooves, face side inner and outer threads or machining according to your drawing. In the measuring room, we carry out optical measurements using 3D measuring machines.
      • Mechanical components

      • Installing mechanical components
        Around 16% of all premature bearing failures are due to improper installation or the use of unsuitable installation methods. Selecting the most suitable installation method for each installation situation increases the service life of the bearings and helps eliminate costs caused by premature bearing failures.

        We store balls, needles and freewheels in various dimensions and designs
        in our warehouse.
      • Timing belts and pulleys

      • The gear belt reaches 98% efficiency without grease, maintenance and regulating the tension due to an interlocking, non-slip load transmission. Gear belts are synchronous drive elements for linear, transport and drive tasks.

        The MULCO joint venture is an amalgamation of leading drive specialists. REIFF is your Mulco partner for the Württemberg sales region.
      • V-belts, flat belts, transport belts and pulleys

      • Despite the many new drive possibilities the V-belt has maintained its ground.

        The range of V-belts in use
        Hardly any other drive element is possessed of such a large range. From V-ribbed belts and raw-edged types to power belts and double V-belts to wide-angle and wide V-belts this drive element has virtually countless versions.

        Our machining service:
        Separation, surface treatment, fabrication
      • Chains, couplings and accessories

      • For drive and conveying systems. Chain drives in abundance:
        from standard roller chains to maintenance-free chains through to conveying and transport chains. We offer a broad range of quality chains and the components that go with them.
        Special designs are produced to customer requirements.

        Our machining service:
        Separation, surface treatment, fabrication

         
      • Installation and maintenance products

      • Every bearing has a specific service life. However, experience has shown that the service life of antifriction bearings which appear to be identical can differ even under the same operating conditions. Correct handling of the bearings during a work step is vitally important to ensure that they reach their full service life. If you use the right process and tools, you can significantly increase the service life of your antifriction bearings and thereby also the availability and efficiency of your systems.

        Our wide selection is impressive. On request, we can present our equipment to you on-site.
    • Sealing Technology

        • Static seals

        • Optimal seal selection depends on a wide range of technical application parameters. A considerable number of diverse seal variations were designed in order to satisfy every specification. Our experts will advise you as regards the proper application. Our extensive standard range is based primarily on the branded products of our partner Trelleborg Sealing Solutions. Many applications within the realm of sealing technology can only be covered by special products or new developments.
        • Rotary seals

        • Sealing Elements/Hydraulic Seals

          Optimal seal selection depends on a wide range of technical application parameters. A considerable number of diverse seal variations were designed in order to satisfy every specification. Our experts will advise you as regards the proper application. Our extensive standard programme is based primarily on the branded products of our partner Trelleborg Sealing Solutions. Many applications within the realm of sealing technology can only be covered by special products or new developments.
        • Hydraulic and pneumatic seals

        • Sealing Elements/Hydraulic Seals

          Optimal seal selection depends on a wide range of technical application parameters. A considerable number of diverse seal variations were designed in order to satisfy every specification. Our experts will advise you as regards the proper application. Our extensive standard programme is based primarily on the branded products of our partner Trelleborg Sealing Solutions. Many applications within the realm of sealing technology can only be covered by special products or new developments.
        • Flat seals, rubber sheets and gasket sheets

        • Rubber Plates/Insulators - supplied according to size

          The range of this product group comprises a virtually infinite programme covering sealing materials, insulation materials and grinding media, as well as wheels and rollers. Qualified associates and extensive product availability assure an optimal consultancy outcome. Application problems are analysed by us and discussed together with the customer so that a customised and cost-efficient application recommendation can be given.

          Our machining and workshop centre manufactures components made of plastic and rubber materials according to the customer's size specifications. Using modern machinery equipment we achieve precisely sized components for rubber blanks and for seal blanking presses according to design.
      • Hose Technology

          • Hoses in all variations and materials

          • There are hoses in countless versions and their applications are equally multifaceted. Hoses are made from soft PVC, polyester elastomers and various rubber blends among others.
            Depending on the application, they have to be alkali- and acid-resistant, suitable for high and low temperatures, high tensile and abrasion-resistant and pressure- and vacuum-resistant. Our experts will advise you regarding proper use.

            Fittings Galore
            Our versatile and wide range of fittings guarantees the right solution for every application and for every connection. REIFF specialises in solving hose connection problems.

            The Right Connection – Hose and Fitting
            Our strength lies in connecting both hose and fitting products to a functional and application-synchronised complete line. We supply all requisite linkage and connection parts and install them in our own workshops to ready complete hose lines – pressure-tested on request.
          • Industrial hoses

          • Our product range:
            Exhaust gas hoses, suction/blower hoses, petrol hoses, chemical hoses, steam hoses, pressurised air hoses, flat hoses, conveyor hoses, moulded hoses, gas hoses, beverage hoses, A/C hoses, compensators, fuel hoses, radiator hoses, food hoses, air hoses, metal hoses, oil hoses, pneumatic hoses, compressed air hoses, sand blasting hoses, suction/pressure hoses, hoses without reinforcement, silo hoses, spiral hoses, multi-purpose hoses, water hoses, corrugated hoses
          • Hydraulic hoses

          • Our product range:
            Cablelock AS break-away safety devices for high-pressure hoses, colour spray hoses, high-pressure hoses, maximum pressure hoses, sewer jetting hoses, compact hydraulic hoses, plastic hydraulic hoses, measuring hoses, multi-spiral hoses, low-pressure hoses, PTFE hoses with stainless steel braiding, suction hoses, hose protection, braided steel hoses, textile hoses, thermoplastic hoses, washer hoses
          • Fittings/pipelines

          • Our product range:
            Shut-off valves, pressurised air fittings, grease guns, fire-fighting fittings, bent pipes, quick couplings, industrial fittings, ball valves, measuring technology, swaged fittings, compressed air fittings, pipes, pipe clamps, tube couplings, SAE flanges, safety clamp fittings, hose reels, hose presses and accessories, hose clamps, hose brackets, hose fittings, hose trolleys, grease nipples, compression fittings, quick connect couplings, plastic protectors, tank truck couplings, EPSILON dry couplings, water metering fittings
        • Adhesive technology

                • Adhesive technology

                • Plastics – Our Strength Lies in Variety
                  With the abundance of plastics with their varying properties and ongoing innovations in the plastics sector only a plastics specialist can retain a comprehensive view of the market. Detailed knowledge of the several plastic materials is the prerequisite for rational processing and optimal use.

                  Standard Qualities Abundantly Available
                  To facilitate rapid disposition, our plastics portfolio covers every standard thermosetting semi-finished product like plates, bars, blocks and hollow rods. As a result we ensure not only the fastest delivery of semi-finished products possible, but the rapid delivery of blanks as well.

                  Our Own Workshop-based Plastics Processing Service
                  Our service includes application technology consulting and the entire processing programme from plastic semi-finished products to finished parts according to design right in our own workshops.

                  Innovative in Plastics
                  For over 20 years our specialist team has been dealing with the processing of semi-finished products and providing extensive know-how. As a founding member of K4plus, a national purchasing pool of technical distributors, REIFF Technische Produkte has been advocating for the solution of many application problem
            • Plastics technology

            • Accurately Fitting Plastics Made to Order
                • Semi-finished plastic products and finished parts

                • We offer special materials for the food and pharmaceutical industries and have our own in-house manufacturing facility.
                • Plastic rubber moulded parts

                • We have a wide range of technical know-how in moulded part design and material selection as well as thermoforming.
                • Food plastic

                • Technical plastics are making ever greater inroads in the food processing and packaging industry. They take over where standard materials fail.
                • Security and visors

                • Profit from our knowledge in the field of sight disks and put yourself at a firm advantage with REIFF Technische Produkte. As part of our professional cut part service, we can machine the sight disks from transparent plastic according to your specifications and, if required, can refine them with a special coating.
              • Profile technology

              • Range of Materials, Range of Applications and Prototypes

                No matter where, when or in what form a sealing problem exists – we find a professional solution fast. Your problem definition becomes our job.

                Profile Variety ex Warehouse
                In addition to the comprehensive selection of standard profiles REIFF Technische Produkte specialises in special manufactures. We develop profiles according to the customer's design or technical specifications for application situations and fields of the most diverse kind.

                Profile Materials
                Our range comprises every standard elastomer and plastic. Our associates select the optimal material according to the requirement.

                Profile Design - quick and cost-effective
                Modern design techniques involve prototype components and prototype tools. Prototypes are generated cost-effectively using state-of-the-art laser processes in a matter of a few days.

                Our machine language programme:
                • ACAD
                • Inventor
                • Mechanical Desktop

                Frame Vulcanisation
                For window and façade construction, the commercial vehicle industry and similar areas of production we manufacture entire profile systems. Even in the case of the most diverse dimensions we produce detail-precise sealing frames with vulcanised corner joints using the injection moulding process.
                  • Rubber and plastic profiles

                  • Coating, fabrication, profile vulcanisation and manufacturing according to drawings – everything from one source.
                  • Rubber/TPE rubber moulded parts/vulcanised profile frames

                  • Whether we're using EPDM, NBR, CR, TPE or other materials and 2-component parts, whether production is large scale or a single unit,
                    we will find the right solution for your application either in our own production facility
                    or on the international procurement markets.
                    Frame vulcanisation
                    We manufacture entire profile systems for window and façade construction, the commercial vehicle industry and similar areas of production. We produce detail-precise sealing frames with vulcanised corner joints using the injection moulding process for a wide range of dimensions.
                  • Individual Profile technology

                  • Profile systems for your conservatory system

                • Insulation technology

                • Rubber-Metal Elements
                  Machines in operation generate vibrations that can have troublesome effects and cause damage to the machines. Rubber-metal elements repress jarring, end machine vibrations and shield against excessive noise. Numerous sizes and types with various metal part connections and elastomer Shore hardness result in design possibilities for multiple applications.

                  User-oriented Consultation
                  The application of rubber-metal elements can only be determined individually and depending on weight, generating frequency and the particular environment.

                  Indeed the selection of the proper Shore hardness can be of decisive significance. We advise you one on one and relative to your application.
                    • Noise protection

                    • Noise protection - our experts help to avoid getting sick from noise


                      The second most common occupational illness is deafness. Co-workers who are steadily exposed to high levels of noise frequently suffer from irremediable late sequelae.

                      There are a number of specific acoustic noise abatement possibilities:
                      • structure-borne noise absorption
                      • structure-borne noise insulation
                      • air-borne noise absorption and
                      • air-borne noise insulation.

                      The noise protection sector is a broad field, in which it is difficult to find the appropriate material for the particular application without expert assistance. Ask our experts. Owing to our many years of experience and technical know-how we will provide you with the appropriate solution.