• Offer Profile
  • Reer was born in 1959 and ever since we have been marketing our broad collection of lamps, starting with professional light sources and then moving into the household lighting market.

    Our name is widely known among industries and wholesalers, thanks to the optoelectronic sensors manufactured by the Safety Division, and to the miniature light bulbs which are at the roots of our Lighting Division.
Product Portfolio
  • safety and automation

  • SAFETY SENSORS

    • EOS4

    • Compact, Type 4 - SIL 3 and SILCL 3 - PL e Light Curtain.
      EOS4, with its small-size housing and minimum dead zone, is ideal for the protection of any tool machine, in particular where space restrictions exist.

      Its very small dead zone, only present on one side, allows EOS4 to keep its resolution up to 30 mm if installed on a plan and up to 40 mm if installed at 90° against another EOS unit.

      EOS4 is available in the X and XHversions, with the integration of start-restart interlock and external contactor monitoring (EDM), as well as in the A and AH versions with automatic restart.

      Special versions with IP 69K watertight enclosure (WTF and WTHF), also suitable for Food & Beverage industry, available.
    • ADMIRAL

    • Optoelectronic Safety Barrier for the protection of workers exposed to risks arising from the use of dangerous machines. Safety Barrier Admiral, with its two safe static outputs, can work without external control units with all the safety functions integrated inside the Emitter and the Receiver complying perfectly with the requirments of the European Standard EN 61496-1 and the International Standard IEC 61496-1-2.

       
    • JANUS

    • Optoelectronic Safety Barrier for the protection of workers exposed to risks arising from the use of dangerous machines, in situation where the MUTING function is necessary.

      The Safety Barrier Janus, with its two safe static outputs, can work without external control units having all the safety functions integrated inside the Emitter and the Receiver and complying perfectly with the requirements of the European Standard EN 61496-1 and of the International Standard IEC 61496-1-2.
    • EOS2

    • Compact, Type 2 - SIL 2 and SILCL 2 - PL d Light Curtain.
      EOS2, with its small-size housing and minimum dead zone, is ideal for the protection of tool machines, in particular where space restrictions exist. Its very small dead zone, only present on one side, allows EOS2 to keep its resolution up to 30 mm if installed on a plan and up to 40 mm if installed at 90° against another EOS unit.

      EOS2 is available in the X versions, with the integration of start-restart interlock and external contactor monitoring (EDM), as well as in the A versions with automatic restart.

      Special versions with IP 69K watertight enclosure (WTF and WTHF), also suitable for Food & Beverage industry, available.
    • VISION

    • Type 2 optoelectronic Safety Barrier for the protection of workers exposed to risks arising from the use of dangerous machines.The Safety Barrier Vision, with its two safe static outputs, can work without external control units with all the safety functions integrated inside the Emitter and the Receiver, in perfect compliance with the requirements of the European Standard EN 61496-1 and of the International Standard IEC 61496-1-2.
    • MAGNUS

    • Magnetic Safety Sensors with coded magnets.
      They can be connected with:
      • the programmable safety controller Mosaic, with which they are certified to reach safety level PLe / SIL3 (up to 4 sensors with M1)
      • the dedicated interface MGd1, with which they are certified to reach PLd (1 sensor) or PLc (up to 4 sensors).
    • ILION, ULISSE

    • Safety photocell for the protection of workers exposed to risks arising from the use of dangerous machines (according to category 2). Used in conjunction with the AU SX or the AU SXM control units, Ilion forms a type 2 photoelectric safety system in compliance with the Standards EN 61496-1 and IEC 61496-1-2.
    • PHARO

    • Safety laser scanner PHARO is an optoelectronic device for accident prevention creating programmable protected horizontal or vertical areas
      of variable shape without the need of using a separate reflector or a receiver.

      The device does not need an external control unit as all safety functions
      are built-in.

      PHARO has a Configuration Memory Module built into the pull-out connector, where data on protected areas and programmed operational parameters are stored. This module permits replacement of a faulty
      sensor with a new device, the configuration remaining unchanged and without possibility of error.

      PHARO can create two safety zones of 4 meter max radius and two associated separately programmable pre-alarm areas.
  • SAFETY INTERFACES AND CONTROLLERS

      • MOSAIC

      • Mosaic is a modular, configurable safety controller for protecting machines or plants. Mosaic is capable of monitoring several safety sensors and commands, such as safety light curtains, laser scanners, photocells, mechanical switches, mats, emergency stops, two-hand controls, concentrating management of these in a single, flexible device.
        Thanks to MCT1 and MCT2 modules, parts of the Mosaic System can be decentralized in remote cabinets with respect to the master unit M1.
        Mosaic offers numerous advantages compared with safety solutions based on traditional components, such as relay type safety modules, as it:

        • Reduces the number of components
          and therefore footprint and wiring
        • Promotes faster electrical cabinet
          construction
        • Affords the necessary logical
          configuration using a single, simple
          programming software, facilitating
          modifications by machine designers
        • Makes it possible to set up tamper-proof
          safety systems
        • Simplifies machine maintenance through
          the MCM memory card, which can be
          used to transfer the configuration
          program to a new Mosaic in just a few
          simple steps.
      • AD SR

      • Safety relay module, category 4 / PL e for emergency stop.

        Model ADSRE4 with selectable operation: automatic restart or manual restart (not monitored).

        Model ADSRE4C with monitored manual restart.
  • SENSORS

      • METRON

      • Light curtains conceived for those industrial and automation applications in which object detection, measurement and recognition are necessary.
        Depending on the number and position of the intercepted beams, Metron is able to provide the relevant information to a PC or PLC in real time. That is:
        • Dimensional measurement
        • Profile or shape detection
        • Position detection
        • Piece counting
        • Discrimination of object presence or absence

        All the operating functions are integrated into the receiver, therefore Metron needs no external control unit. Metron can be equipped with an RS-485 serial output and/or with 0/24V pnp solid state outputs, through which the relevant data can be transmitted to the PC/PLC.

        The Metron outputs operation and operating modes can be programmed via the Metronconf special software, supplied with each light curtain. It can be installed on any PC and it is provided with a user-friendly graphic interface.

        In order to fulfil any application requirement, Metron is available in various models, having different beam spacing (resolution), that is 5, 10, 25, 30, 50 and 75 mm, and whose controlled heights vary from 140 mm to 2525 mm.

        Possibility of connecting up to 8 light curtains, even having different heights and beam spacing, on just one serial line (complex systems for multi-dimensional measurement). Complete diagnostics system.