By combining two skills: the steel structure and the manufacture of lifting and handling equipment, ADC implements a unique synergy.
These high performance equipment (capacities of up to 200t and lifting speed
up to 90 m/min) are developed according to customers’ specifications.
Designed with an open kinematics, our electric winches can be composed of
branded equipment chosen by the customer, such as reducers, engines and
brakes..
Winches are designed according to a combination of several items :
In addition and upon request:
Designed to handle light weights, the chain hoists are light with a compact and robust design, reduced maintenance and simple to use.
ADC distributes and assembles reliable brands that are famous on the market.
Covering 80 kg to 20 tonnes, the range can also handle occasional heavy lifting.
The ADC single girder overhead travelling cranes are adapted for a wide range of daily usage in plants and workshops to ease material flow.
These overhead travelling cranes are built for your lifting needs up to 12.5t and up to 30 meters span, and can be installed in new or existing buildings.
Our single girder overhead travelling cranes are built either with rolled section or welded box sections depending on load and span. Girders are made on automatic welding bench in our plant.
The highly important connection between girder and end-carriage deserves a special attention to avoid long term wear and is accurately prepared on assembly bench.
Our single girder overhead traveling cranes are equipped with low headroom wire rope hoist and enable a maximum lifting height. The ADC wire rope hoists, also designed and manufactured in Parthenay, this makes ADC the only French manufacturer of complete overhead travelling cranes.
ADC also has a Steel structure department, which calculates and provides steel work and runways beam; this dual experience reinforces greatly the role of guidance and expert of our Company.
Our overhead travelling cranes are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling (FEM). The box girder of our cranes are certified QUALIBAT.
Created from tested and standardized components, ADC’s overhead travelling cranes are designed to meet a maximum of customer’s requirements.
The double girder overhead travelling cranes ADC are built for heavy loads and/or to gain lifting height.
According to the setup of your building, we can propose an adapted solution.
Our double girder overhead travelling cranes ADC are manufactured with H-Beam girder or welded-box girder.
Our ranges of double girder overhead travelling cranes extend up to 30t capacity and 30m span.
The outsize characteristics are covered by our range of customized overhead travelling crane.
The standardization of our overhead travelling cranes allow you to get a high quality equipment at a lower cost.
All our overhead travelling cranes are designed and manufactured in Parthenay, in Deux-Sèvres (West of France). They are equipped with ADC rope hoists, also designed and manufactured in Parthenay, this makes ADC the only French manufacturer of complete overhead travelling cranes.
A lot of installations are already in use in France and in many countries.
Our technical team takes in charge the completion of your project (studies, consulting, manufacturing, assembly, maintenance (10 agencies in France)
ADC also have a Steel structure department, which calculates and provides the runways beam; this dual expertise reinforces greatly the role of guidance and specifier of our Company.
They are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling. The frames of our cranes are certified QUALIBAT bridges.
For complex buildings with limited space or low headroom, ADC offers a range of underslung crane. It runs on the runway beam directly mounted under the ceiling which is adaptable to buildings with underslung runway beams.
The underslung cranes ADC maximize the available space in buildings by reducing the clearance between hook and walls. This type of crane can be designed to allow combinations with other cranes in nearby halls so as to transfer hoists and loads between cranes and workshops.
Our range of standard underslung cranes allows to obtain a maximum lifting height under hook (with our range of low headroom wire rope hoist). The range extends up to 10 tons of lifting capacity and up to 18 meters span.
The range is adapted for chain hoist for small loads up to 3.2 tons and for rope hoist for higher lifting capacity.
ADC underslung cranes are built with standardized parts, this allows you to make the maintenance of your equipment at an economical price.
Our girders are built either with rolled section or welded box sections depending on load and span. Girders are made on automatic welding bench in our plant.
They are equipped with ADC wire rope hoists, also designed and manufactured in Parthenay, this makes ADC the only French manufacturer of complete overhead travelling cranes.
Created from tested and standardized components, ADC’s overhead travelling cranes are designed to meet a maximum of customer’s requirements.
They are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling. The frames of our cranes are certified QUALIBAT bridges.
Single or double girder, overhead or underslung, ADC overhead travelling cranes can be adapted at all your requirements.
Our technical team takes in charge the completion of your project (studies, consulting, manufacturing, assembly, maintenance (10 agencies in France)
A lot of installations are already in use in France and in many countries.
Contact us for specific developments such as:
ADC also have a Steel structure department, which calculates and provides the runways beam
ADC can provide solutions and adapted fabrication for each special case in order to meet high tech requirements and the specific needs of your industrial programme thanks to its Mechanical and Electrical Design Offices. A Sales engineer is then dedicated to the development, implementation and commissioning of your installation.
Procedures of ISO9001 standard and the rules of the European Mechanical Handling Federation (FEM) are an integral part of our production.
Many high performance apparatus (M8) already in operation.
Areas of application:
ADC’s Structural Steel department calculates and provides runway beams.
ADC has also a Steel structure department, which calculates and provides steel work and runways beam; this dual experience reinforces greatly the role of guidance and expert of our Company.
Our lifting and handling equipment are designed and made according to your instructions and our quality procedures in accordance with ISO 9001 and the Rules of the European Federation of Materials Handling. The frames of our cranes are certified QUALIBAT bridges.
MEETING YOUR EXPECTATIONS
They are designed and made according to your instructions and our quality
procedures in accordance with ISO 9001 and the Rules of the European
Federation of Materials Handling. The frames of our cranes are certified
QUALIBAT bridges.
Our technical team takes in charge the completion of your project (studies,
consulting, manufacturing, assembly, maintenance (10 agencies in France)
Our jib-cranes are designed and produced with a special care and according to current standards and coefficients. Components are determined to provide users with the highest possible levels of security.
The many options associated to our already extensive basic offer enable you to optimise the configuration of this equipment to suit your real requirements.
Partial rotation wall- or column-mounted jib-cranes: tubular profile, I-beam
triangulated jib-cranes, I-beam inverted jib-cranes, including the following
technical features:
LIGHTNESS
The system design minimizes stress on building structures.
ADC offers you a wide range of lifting platforms that may reach lifting heights of 10 metres with capacity of 80 tonnes. Our teams of experts design and manufacture adapted lifting solutions that satisfy your requirements, your constraints and your installations.
Different lifting platform models:
Steel Construction was the origin of the ATELIERS DE LA CHAINETTE, created in 1919 and which is now called ADC.
Since then, we have remained faithful to structural steel buildings. This gives us a recognised know-how.
We build structures across France of up to 65 metres span with no intermediate columns.
Production and installation of independent runway beams.The Structural Steel department also calculates and produces runway beams with:
In addition to this activity, we also produce insulated and non-insulated roofing and sidings in lacquered steel sheets or single or dual-skin sandwich panels.
If you have any construction plans, contact us.
Our teams will work with you to find the solution that best suits your functional and financial requirements. This will let you manage the cost of your investment more accurately.