• Offer Profile
  • maxGermany GmbH is your partner from warehouse technology to special machines to GaLaBau. We offer you a comprehensive product portfolio from simple low-platform trucks via INOX and special machines to heavy-duty high-platform trucks and the route train. We also offer electric forklift trucks of the brand Mora with a tonnage from 5 to 16 tons.

    A further focus is the project planning and development of special machines for use in the transport of special goods or if special safety devices are required.

Product Portfolio
  • Your partner for agricultural & construction machinery technology

    • EVERYTHING FROM ONE HAND!

      maxGermany GmbH is your partner for agricultural and construction machinery technology, from small articulated loaders for private use to articulated loaders with a tipping load of up to 2700 kg. From landscape conservation to forestry, on construction sites or in agriculture, MultiOne offers you all this!

        • SMALL ARTICULATED LOADERS FROM MULTIONE

          • With 10 different series, over 19 different models and over 170 attachments, MultiOne offers the best articulated loaders on the market to solve your tasks in agriculture, gardening, landscaping, communal landscaping and private areas.

            Discover the entire product range: from the small and agile zero radius loader, ideal for all your special tasks, to the super-strong 75 HP Series 10 loader.

            All MultiOne 4-wheel drive small loaders are equipped with articulated steering. This means that the machines have a joint between the front and rear carriages that allows them to be driven in the tightest of spaces and guarantees traction on all types of ground. From Series 5 onwards, all models are equipped with a telescopic lifting arm.

              • SERIES 1

              • SMALL LOADER WITH ZERO RADIUS STEERING AND 3 WHEEL DRIVE

                The Series 1 is a small wheel loader for private or special tasks, easy to use, comfortable and safe. The zero radius steering guarantees maximum manoeuvrability even in the most confined spaces. Hydrostatic all-wheel drive with pedal operation.

                Series 1 is a small loader with zero radius.

                MultiOne Series 1: user-friendly, convenient and safe.
                The zero-radius steering enables easy handling in the most confined spaces.

                The hydrostatic travel drive with pedal control gives a pleasant driving experience on all types of surfaces and provides high power when required.

                Advantages:

                • Small dimensions
                • Low operating costs
                • zero radius steering

                Specs:

                • Engine manufacturer: Yanmar L100
                • Power (ISO Large): 12 HP / 9 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 8 km/h (5 mph)
                • Hydr. delivery rate for attachments: 19 l/min (5 gal/min)
                • Max. Lifting height: 1.8 m (70.9 in)
                • Breaking force / 50 cm: 250 kg (551 lbs)
                • Turning radius: inside / outside: 0 / 993 mm (0 / 39 in)
                • Standard tyres (tractor treads): 18×9.50-8
                • Weight: 390 kg (860 lbs)
                • Max tipping load (with rear weight): 320 kg (705 lbs)
                • Lifting capacity (with rear weight): 250 kg (551 lbs)
                • Code: C925005
              • SERIES 2

              • THE ARTICULATED LOADER FOR PRIVATE USE AND RESIDENTIAL MAINTENANCE

                The smallest and most economical articulated loader series from MultiOne. These machines guarantee high performance on any surface.

                The smallest and most economical articulated loader series from MultiOne.

                These machines offer high performance on any surface.
                The articulated steering system allows the user to move the machine in all comfort, even in the most confined spaces.

                The combination of compact performance and innovative design makes the Series 2 the best machine in its class and the best solution for private use.

                Advantages:

                • articulated vehicle
                • Compact dimensions
                • Simple and fast starting

                Specs:

                • Engine manufacturer: B&S Vanguard 8270
                • Power (ISO Large): 25 HP / 18.6 kW
                • Fuel: Petrol
                • Service brake: Hydrostatic
                • Speed (max.): 15 km/h (9.3 mph)
                • Hydr. delivery rate for attachments: 42 l/min (11.1 gal/min)
                • Max. Lifting height: 1.6 m (63 in)
                • Breaking force / 50 cm: 500 kg (1102 lbs)
                • Turning radius: inside / outside: 700 / 1698 mm (27.6 / 66.9 in)
                • Standard tyres (tractor treads): 20×8.00-10
                • Weight: 700 kg (1543 lbs)
                • Max tipping load (with rear weight): 530 kg (1168 lbs)
                • Lifting capacity (machine straight - with rear weight): 420 kg (926 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 340 kg (750 lbs)
                • Code: C951027
              • SERIES 4

              • LIGHT, TELESCOPIC AND INEXPENSIVE

                Mini loaders for private and professional use. Diesel, 20 HP The MultiOne articulated loader 4 series is an excellent, versatile machine for the development and maintenance of landscape areas. Ideal for gardeners, farmers, private and professional use.

                The miniloader for private and professional use.

                The Multione articulated loader 4 series is an excellent versatile machine for the development and maintenance of landscape areas, ideal for gardeners, agriculture, private and professional use.

                Advantages:

                • Telescopic arm
                • Compact dimensions
                • Low operating costs
                • 20 hp diesel engine

                Specs:

                • Engine manufacturer: Kubota D722
                • Power (ISO Large): 20 HP / 14.9 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 14 km/h (8.7 mph)
                • Hydr. flow rate for attachments: 31 l/min (8.2 GPM)
                • Max. Lifting height: 2.75 m (108 in)
                • Breaking force / 50 cm: 800 kg (1764 lbs)
                • Turning radius: inside / outside: 890 / 1890 mm (35 / 74.4 in)
                • Standard tyres (tractor profiles): 23×8.50-12
                • Weight: 940 kg (2072 lbs)
                • Max tipping load (with rear weight): 1020 kg (2249 lbs)
                • Lifting capacity (machine straight - with rear weight): 820 kg (1808 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 700 kg (1543 lbs)
                • Code: C944000
              • SERIES 5

              • COMPACT, TELESCOPIC LIFTING ARM AND LESS THAN 1000 KG

                This articulated loader for daily use fits everywhere. Diesel engines from 20 to 28 hp MultiOne Series 5 are compact articulated loaders in the winning combination of high performance and low operating costs. Without compromising performance, power, economy, innovation, technology or design.

                MultiOne Series 5: these compact articulated loaders offer a convincing combination of high performance and low operating costs.

                Uncompromising performance, power, economy, innovation, technology and design.

                There are reasons why this machine represents the most user-friendly offering on the market.

                This telescopic lifting arm combined with the compact dimensions of the Series 5 is the perfect solution for all those who need to combine a wide working range of the lifting arm with high manoeuvrability in a confined space; both in the private and professional sector.

                Advantages:

                • Telescopic lifting arm
                • Compact dimensions
                • Low operating costs

                Specs:

                • Engine manufacturer: Kubota D902
                • Power (ISO Large): 25 HP / 18,4 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 14 km/h (8.7 mph)
                • Hydr. flow rate for attachments: 34 l/min (9 GPM)
                • Max. Lifting height: 2.75 m (108 in)
                • Breaking force / 50 cm: 800 kg (1764 lbs)
                • Turning radius: inside / outside: 890 / 1890 mm (35 / 74.4 in)
                • Standard tyres (tractor treads): 23X8.50-12
                • Weight: 960 kg (2116 lbs)
                • Max tipping load (with rear weight): 1020 kg (2249 lbs)
                • Lifting capacity (machine straight - with rear weight): 820 kg (1808 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 700 kg (1543 lbs)
                • Code: C977016
              • SERIES 6

              • COMPACT, ARTICULATED, STRONG AND WEIGHING ONLY 1430 KG

                A concentrate of strength. 28 HP diesel engine, Hi-Flow and over 1200 kg tipping load The Series 6 is the most compact version of the new machine generation from MultiOne. The unexpectedly small dimensions of our articulated loaders are all the more amazing when compared to the incredibly high maximum lifting capacity.

                MultiOne Series 6 is one of the most compact versions of the new articulated loaders. The incredibly handy dimensions are particularly exceptional when compared to the high lifting forces and high performance offered by this series.
                The completely new buckling frame construction and other innovative solutions underline the leading position of this new series in every respect.

                Series 6 is the cost-effective solution to acquire all the advantages of a MultiOne articulated loader at a competitive price without sacrificing performance and quality.

                These compact articulated loaders work perfectly in confined spaces, are easy to transport and allow the use of almost all attachments for digging, excavating and earth moving, cleaning, landscaping, construction, farm work and agriculture. The Series 6 multi-function loaders are ideal for private work, commercial work on the yard, on the construction site, removal of debris, lifting on any surface and general loading work.

                Advantages:

                • Advanced and modern frame design
                • Compact dimensions
                • Large lifting height and maximum lifting load

                Specs:

                • Engine manufacturer: Yanmar 3TNV76
                • Power (ISO Large): 28 HP / 21 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 11 km/h (6.8 mph)
                • Hydr. delivery rate for attachments: 46 l/min (12.2 gal/min)
                • Max. Lifting height: 2.92 m (115 in)
                • Breaking force / 50 cm: 1400 kg (3086 lbs)
                • Turning radius: inside / outside: 905 / 2020 mm (35.6 / 79.5 in)
                • Standard tyres (tractor profiles): 23×8.50-12
                • Weight: 1430 kg (3153 lbs)
                • Max tipping load (with rear weight): 1200 kg (2646 lbs)
                • Lifting capacity (machine straight - with rear weight): 960 kg (2116 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 780 kg (1720 lbs)
                • Code: C961010
              • SERIES 7

              • ENORMOUSLY VERSATILE ARTICULATED LOADERS

                35 HP diesel engine, 2 speed ranges, Hi-Flow and max. 1550 kg tipping load - for demanding operators MultiOne Series 7 is the convincing combination of power, speed and manoeuvrability. The powerful motor and the 4 radial piston wheel motors guarantee high speed and high thrust. The new front carriage and telescopic lifting arm ensure maximum lifting performance.

                MultiOne Series 7 presents the convincing combination of power, speed and manoeuvrability.

                A powerful motor combined with direct drive via radial piston motors ensures high speed and high thrust.
                The new frame design together with the new telescopic lifting arm ensure high lifting possibilities and mobility.

                MultiOne Series 7 meets most needs thanks to its high power, exceptional performance and many innovative features. MultiOne Series 7 builds its strengths on the advantages of our articulated loaders: multi-functionality and high performance.

                MultiOne Series 7 - Articulated loaders offer the entry into the professional class for agriculture, livestock and construction as an alternative to manual work or a digging skid steer loader.

                Advantages:

                • Advanced and modern frame design
                • Counterweights integrated into the frame
                • Very high lifting height and maximum lifting load

                Specs:

                • Engine manufacturer: Yanmar 3TNV76
                • Power (ISO Large): 28 HP / 21 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 11 km/h (6.8 mph)
                • Hydr. delivery rate for attachments: 37 l/min (9.8 gal/min)
                • Max. Lifting height: 2.90 m (114 in)
                • Breaking force / 50 cm: 1700 kg (3748 lbs)
                • Turning radius: inside / outside: 825 / 2090 mm (32.5 / 82.3 in)
                • Standard tyres (tractor profiles): 23×10.50-12
                • Weight: 1610 kg (3549 lbs)
                • Max tipping load (with rear weight): 1500 kg (3307 lbs)
                • Lifting capacity (machine straight - with rear weight): 1200 kg (2645 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 1020 kg (2249 lbs)
                • Code: C962015
              • SERIES 8

              • ARTICULATED LOADER WITH VERY HIGH TORQUE

                The MultiOne machine for every job. 40PS, 2 speed ranges and Hi-Flow! Series 8 from MultiOne is the best solution on the market for all those who want to take advantage of the countless possibilities of the new series and also want high torque and high speed.

                MultiOne Series 8 is the best solution on the articulated loader market for all those who need high torque and high speed for all the incredible applications of the new series.

                The Series 8 uses the same new Series 7 frame, but is equipped with a more powerful motor, giving the direct-drive wheel motors incomparably high thrust compared to the competition. The features regarding stability and reliability of these new revolutionary articulated loaders benefit from the advanced and innovative frame design, the very low centre of gravity and the integrated counterweights for maximum stability and the heavy duty hot forged central joint.

                Other design benefits include a spacious, comfortable and easily accessible operator station and the option of a luxurious cabin with air conditioning.

                This series offers the best choice for hard work where power, thrust and comfort are required.

                Advantages:

                • Advanced and modern frame design
                • Integrated counterweights
                • Powerful motor and direct drive wheel motors
                • Cabin with air conditioning possible

                Specs:

                • Engine manufacturer: Yanmar 3TNV88
                • Power (ISO Large): 40 HP / 30 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 15 km/h (9.3 mph)
                • Hydr. delivery rate for attachments: 72 l/min (19 gal/min)
                • Max. Lifting height: 2.98 m (117.3 in)
                • Breaking force / 50 cm: 1700 kg (3748 lbs)
                • Turning radius: inside / outside: 825 / 2090 mm (32.5 / 82.3 in)
                • Standard tyres (tractor treads): 26×12.00-12
                • Weight: 1722 kg (3796 lbs)
                • Max tipping load (with rear weight): 1600 kg (3527 lbs)
                • Lifting capacity (machine straight - with rear weight): 1280 kg (2822 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 1070 kg (2360 lbs)
                • Code: C963000
              • SERIES 9

              • HEAVY-DUTY ARTICULATED LOADERS

                Particularly high lifting capacity, diesel engines from 50 to 57 hp, hi-flow and top equipment The MultiOne Series 9 models are unmatched in the market in terms of their unique ratio of maximum lifting capacity to dead weight. The Series 9 is a further development of the proven GT Series and impresses with a completely new structure and design.

                The best lifting load-to-weight ratio

                MultiOne Series 9 is the articulated loader with the best ratio of maximum lifting capacity to dead weight on the market.

                The Series 9 is a further development of the former top class GT: the new models impress with their new construction and design and also guarantee a unique position in terms of performance and equipment ratio at an extremely competitive price.

                The 9 Series offers the highest value for money for those looking for a compact yet powerful solution. MultiOne articulated loaders are available at a competitive price without sacrificing performance and quality.

                These models are perfect for work requiring high maximum lifting capacity and high thrust.

                Advantages:

                • Innovative and state-of-the-art vehicle design
                • Best lifting load-to-weight ratio
                • Pollutant class: Tier 4 Final

                Specs:

                • Engine manufacturer: Yanmar 4TNV88
                • Power (ISO Large): 50 HP / 37 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 25 km/h (15.5 mph)
                • Hydr. delivery rate for attachments: 85 l/min (22.5 gal/min)
                • Max. Lifting height: 3.21 m (126.4 in)
                • Breaking force / 50 cm: 2200 kg (4850 lbs)
                • Turning radius: inside / outside: 1030 / 2550 mm (40.5 / 100.4 in)
                • Standard tyres (tractor treads): 31×15.50-15 (400/50-15)
                • Weight: 2025 kg (4464 lbs)
                • Max tipping load (with rear weight): 2600 kg (5732 lbs)
                • Lifting capacity (machine straight - with rear weight): 2080 kg (4585 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 1600 kg (3527 lbs)
                • Code: C965000
              • SERIES 10

              • THE STRONGEST SMALL ARTICULATED LOADER IN THE WORLD

                75 hp, 2700 kg tipping load and 40 km/h top speed. You have to try it... The MultiOne Series 10 offers: impressive maximum lifting capacity, incredible speed and extraordinary thrust. The Series 10 cancels what the Series 9 leaves behind and guarantees incomparable working possibilities.

                The best lifting load-to-weight ratio

                Extraordinary lifting capabilities, incredibly fast, extraordinary thrust: MultiOne Series 10 sets new standards in the articulated loader market.

                The Series 10 of our articulated loaders raises what the Series 9 leaves behind and offers exceptional and unbeatable performance in the field of small articulated loaders. To call the Series 10 the best in its class only partly does it justice. The Series 10 is based on the same design principle and the same top-quality components that characterise all new MultiOne articulated loaders and their equipment elements.

                These machines offer solutions no other can offer, with performance and capabilities far beyond what is otherwise offered on the articulated loader market.

                Anyone looking for a compact articulated loader with professional performance data will not find anything above the Series 10.

                Advantages:

                • Advanced and modern frame design
                • Top class services
                • Tier 4 Final

                Specs:

                • Engine manufacturer: Yanmar 4TNV98
                • Power (ISO Large): 72 HP / 54 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 16 - 32 km/h (10 - 20 mph) 20 - 40 km/h (12.4 - 24.8 mph)
                • Hydr. flow rate for attachments: 95 l/min (25 gal/min)
                • Max. Lifting height: 3.21 m (126.4 in)
                • Breaking force / 50 cm: 2600 kg (5732 lbs)
                • Turning radius: inside / outside: 1030 / 2550 mm (40.5 / 100.4 in)
                • Standard tyres (tractor treads): 31×15.50-15 (400/50-15)
                • Weight: 2140 kg (4718 lbs)
                • Max tipping load (with rear weight): 2700 kg (5952 lbs)
                • Lifting capacity (machine straight - with rear weight): 2160 kg (4762 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 1600 kg (3527 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 1700 kg (3748 lbs)
                • Code: C966000
              • SERIES SD

              • MULTIONE WITH SEAT ON THE REAR CAR

                Driver's seat on the rear, very tight curve radii, engines with 28, 35, 40 and 50 hp. The SD Series is the perfect blend of the strengths of the new MultiOne platform and the versatility of an articulated loader with rear seat. This new MultiOne series was originally developed for agricultural use, but is appreciated wherever extremely tight cornering radii are required.

                MultiOne with rear seat

                The SD series from MultiOne was specially developed for use in very narrow passages: the driving seat is located on the rear of the vehicle, as with large wheel loaders, to prevent the driver's cab from shearing out when cornering.

                It is clear that the SD Series is based on the latest design of the MultiOne models, offering their strengths, multifunctionality and performance.

                The large number of original attachments means that these new small MultiOne articulated loaders are indispensable for an application such as agriculture with its many different tasks.

                Advantages:

                • New MultiOne design
                • Very tight curves in very tight spaces
                • High lifting capacity

                Specs:

                • Engine manufacturer: Yanmar 3TNV76
                • Power (ISO Large): 28 HP / 21 kW
                • Fuel: Diesel
                • Service brake: Hydrostatic
                • Speed (max.): 14 km/h (8.7 mph)
                • Hydr. delivery rate for attachments: 31 l/min (8.2 gal/min)
                • Max. Lifting height: 2.90 m (114 in)
                • Breaking force / 50 cm: 1400 kg (3086 lbs)
                • Turning radius: inside / outside: 825 / 2090 mm (32.5 / 82.3 in)
                • Standard tyres (tractor profiles): 23×8.50-12
                • Weight: 1610 kg (3549 lbs)
                • Max tipping load (with rear weight): 1500 kg (3307 lbs)
                • Lifting capacity (machine straight - with rear weight): 1200 kg (2645 lbs)
                • Lifting capacity (machine fully buckled - with rear weight): 900 kg (1984 lbs)
                • Code: C967000
            • Attachment parts

              • With more than 170 original attachments, turn your MultiOne from lawn mower to forklift, from excavator to mixer, from animal feeding to barn cleaning..... or extend your reach with telescopic booms.
                  • 4IN1- SHAFT

                  • The 4in1 bucket enables various functions with one device: digging, levelling, gripping and pushing. Strong cylinders with stop valve allow safe and easy gripping of objects, as well as fine adjustments for levelling. The possibility to open the bucket increases the dumping height. The preparation for screwing of teeth is standard for all sizes for uncomplicated conversion from cutting edge to row of teeth.

                    Features & Benefits

                    • Stable construction
                    • Stop valve for gripping purposes
                    • Increased dumping height
                    • Multifunctional: digging, levelling, gripping, pushing
                  • ABRUPTION SHEARS

                  • Strong shears and strong cutting edges break concrete and cut through steel, reinforced concrete, structural steel mats and steel girders. Minimal vibrations and low noise levels make the demolition shears suitable for use where others reach their limits.

                    Features & Benefits

                    • Powerful
                    • Low volume
                    • 360° hydraulic swivelling
                    • Can be used where others are limited
                  • CULTIVATING BAGGER

                  • The MultiOne backhoe is a compact and amazingly powerful tool, ideal for landscaping and maintenance, sewer work and treatment, water and power lines and much more. Easy and quick to install, it comes standard with its own driver's seat for optimum visibility of the work area.

                    • Features & Benefits
                    • Powerful and 180° tiltable
                    • Good view of the working area
                  • FARMING PAPER

                  • The mounted forklift increases the lifting capacity of the loader. It is the optimum attachment for handling heavy pallets, large sacks and other heavy objects. It is also ideal for loading and unloading trucks. The truck-mounted forklift has foamed tyres which ensure good transportability on any surface.

                    Features & Benefits

                    • For lifting and moving heavy loads
                    • Robust and reliable
                    • Good overview
                  • TRAILER

                  • The MultiOne trailer is useful for transporting garden waste, mulch waste and similar. The trailer has a rotating trailer coupling and a parking brake.
                    Available with manual or hydraulic tipping:
                    -Manual tipping version, agricultural trailer with rear tipping. The tailgate can be opened. (1 version available)
                    -Hydraulic tipping version, trailer with hydraulic tipping, 3 dropsides can be opened. (2 versions available)

                    Features & Benefits

                    • Rugged and versatile tipper trailer, ideal for earth moving and lighter jobs
                  • PRYER

                  • This attachment is ideal for digging up hard and extremely compacted soils, removing roots or tearing stones from the soil. The tines reach 30 cm into the soil.

                    Features & Benefits

                    • Simple and effectiveExtra-strong design
                  • BAG ARM.

                  • The excavator arm is an efficient solution for smaller digging jobs and an attachment for professional use. The control of the MultiOne gives the excavator a good manoeuvrability.

                    Features & Benefits

                    • Easy to use
                    • Effective and useful
                    • Available with hydraulic rotation of 90 degrees
                  • BALKENMÄHER

                  • MultiOnes beam mower is ideal for mowing forage grass. Suitable for high grass - e.g: Hay harvest.

                    Features & Benefits

                    • Compact dimensions
                    • Günstig
                    • Fast
                  • BALE FORK

                  • Suitable for any type of bale.
                    The two bolted and replaceable tines stabilise the load.

                    Features & Benefits

                    • Efficient
                    • Durable
                  • TREE SHEARS

                  • The MultiOne pruning shears are the right choice if you want to prune trees quickly and reliably. It is also possible to cut branches in hard-to-reach areas such as roadsides and river banks. The upper grab provides a firm grip, while the strong blades make a clean and precise cut.

                    • Features & Benefits
                    • Strong and safe pruning shears
                    • For clean and precise cuts
                  • TREE-SHAKER WITH CATCHING SCREEN

                  • State-of-the-art technology for harvesting olives, almonds, nuts, pistachios, ... A minimum distance of approx. 70 cm between the soil and the foliage is required. The system works with a frequency control that transmits the vibration effect specifically to the fruit and protects the trunk from low-frequency vibrations. A hydraulic screen with a diameter of 6 m is available as an option. With the clamp around the tree, unevenness in the terrain can be adapted to the trunk. Depending on the situation, between 40 and 60 trees can be harvested per hour. The vibration head is driven by a compact hydraulic motor. The control elements for setting the vibration and movements can be read on a display visible to the operator on the machine.

                    • Features & Benefits
                    • Adjustable shaking frequency (up to 40 Hz)
                    • Also suitable for trees with wide trunks6 m diameter harvest umbrella
                  • CONCRETE MIXER

                  • The concrete mixer is an inexpensive attachment that allows the mixing, transport and pouring of concrete faster than a standard concrete mixer. Due to its compact dimensions, it is the ideal tool for working on pavements and driveways, for foundation work, in small buildings and in hard-to-reach areas.

                    • Features & Benefits
                    • Faster than a standard concrete mixer
                    • Ideal for difficult to access areas
                  • CONCRETE MIXING SHOVEL

                  • The concrete mixing bucket enables faster mixing, transport and unloading of concrete than with a traditional concrete mixer and wheelbarrow. Its compact dimensions make it ideal for pavements and driveways as well as foundation work and in narrow buildings. Ideal for areas that are difficult to access. Developed for high output rates. Downtimes are reduced and in combination with the MultiOne an efficient and reliable system.

                    • Features & Benefits
                    • Hydraulic drive for mixing and dumping
                    • Easy filling
                    • Removable protective grille for the simple
                    • Maintenance and cleaning
                  • HIVE GRAB

                  • Ideal for the beekeeper, makes transporting the hives easy. The upper frame holds the load securely on the 2 lower forks. Available in different sizes for optimal use and maximum time savings.

                    • Features & Benefits
                    • Sophisticated design
                    • Easy to use and efficient
                    • Designed for special use
                  • BIG BAG - HOOK

                  • The hook makes it possible to transport Big Bags with fertilizer, seeds, pellets, briquettes, wood chips and much more. The rounded lateral safety brackets prevent the Big Bags from swinging up. This reduces the load on the loader and improves load control when emptying, transporting and filling seed drills and spreaders. The robust construction has been proven in numerous tests as a
                    robust, reliable and durable.

                    • Features & Benefits
                    • Simple and efficient
                    • Rounded safety bracket
                • Order picking

                  • In close cooperation with Pegaso S.r.l., located in Northern Italy, which has been developing special equipment for warehouse logistics for more than 20 years, we offer an extraordinary focus on INOX versions for electric high and low lift trucks, special conversions and route trains. The INOX versions fully meet the stringent requirements of the food, pharmaceutical and chemical industries, as well as all other critical environments.

                    Pegaso S.r.l.'s own research and development department offers you the opportunity to fully integrate your wishes and specifications into the production process, so that we can develop the most efficient special equipment for you. Here you benefit from absolute freedom in the planning of your special equipment, be it a fully freely 360° rotatable gripper for paper rolls or mobile weighing systems, layer grippers, tyre carriers or feeders.

                    The ideal solution for your just-in-time logistics is available in the form of route trains in all variations for indoor and outdoor operation, which are certified and patented. In order to support your production and handling processes with the greatest possible flexibility in material flow, we also offer a specialization that fully meets the requirements of user-friendliness and reliability. Pegasolift route hoists can be operated with 2 to 5 trailers and a load capacity of 4,000 kg.

                      • High-platform trucks

                        • Pegasolift's electric high lift trucks have been developed and built as professional working aids. Our low and high lift trucks stand for countless innovations, high residual capacities and excellent manoeuvrability.

                          The wide product range of Pegasolift high lift trucks has been developed to meet the needs of the customers thanks to precise functionality, reliability and safety. Each machine can be customized thanks to many extras and our ability to realize special customer projects.

                          Pegasolift high lift trucks are the solution for every type of storage. They are also available with a driver's platform. Here safety and comfort are guaranteed by the retractable driver's platform and the side safety brackets. The reliability of our machines allows our customers to greatly reduce operating and maintenance costs. Pegasolift high lift trucks are also available in special designs. You tell us what you need, we implement it.

                          Delivery time for standard Pegasolift high lift trucks is currently 4-8 weeks after receipt of order.

                            • W12/16

                              • Load capacity: 1,200 kg
                              • Lifting height: 1,600 mm

                              Options:

                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Cold store version at -30 degrees C
                            • W12/29

                              • Load capacity: 1,200 kg
                              • Lifting height: 4,200 mm

                              Options:

                              • Load protection grille (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the fork
                              • Rubber drive ring for improved traction
                              • Cold store version at -30 degrees C
                            • W12/36

                              • Load capacity: 1,200 kg
                              • Lifting height: 3,600 mm

                              Options:

                              • Load protection grille (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the fork
                              • Rubber drive ring for improved traction
                              • Cold store version at -30 degrees C
                            • W12/42

                              • Load capacity: 1,200 kg
                              • Lifting height: 4,200 mm

                              Options:

                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Cold store version at -30 degrees C
                            • PH14/16

                              • Load capacity: 1,400 kg
                              • Lifting height: 1,600 mm

                              Options:

                              • High free lift (GAL) for DUPLEX masts 3.6m double front rollers
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                            • PH14/29

                              • Load capacity: 1,400 kg
                              • Lifting height: 2,900 mm

                              Options:

                              • High free lift (GAL) for DUPLEX masts 3.6m double front rollers
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement Cold store version at -30 degrees C
                              • Aquamatic system with connection
                            • PH14/36

                              • Load capacity: 1,400 kg
                              • Lifting height: 3,600 mm

                              Options:

                              • High free lift (GAL) for DUPLEX masts 3.6m double front rollers
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                            • PH14/38T

                              • Load capacity: 1,400 kg
                              • Lifting height: 3,800 mm

                              Options:

                              • High free lift (GAL) for DUPLEX masts 3.6m double front rollers
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30 degrees C
                              • Aquamatic system with connection
                            • PH14/45T

                              • Load capacity: 1,400 kg
                              • Lifting height: 4.500 mm

                              Options:

                              • High free lift (GAL) for DUPLEX masts 3.6m double front rollers
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Rubber drive ring for improved traction
                              • Control of stroke movement on both sides; cold store version at -30 degrees C
                              • Aquamatic system with connection
                            • PL16/16

                              • Load capacity: 1.600 kg
                              • Lifting height: 1,600 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • High free lift (GAL) for TRIPLEX mast 3.6 Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL16/29

                              • Load capacity: 1.600 kg
                              • Lifting height: 2,900 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • High free lift (GAL) for TRIPLEX mast 3.6m electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks; rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL16/36

                              • Load capacity: 1.600 kg
                              • Lifting height: 3,600 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • High free lift (GAL) for TRIPLEX mast 3.6m electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • Reinforced version: Rear metal cover.
                            • PL16/38T

                              • Load capacity: 1.600 kg
                              • Lifting height: 3,800 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • High free lift (GAL) for TRIPLEX mast 3.6m electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL16/45T

                              • Load capacity: 1.600 kg
                              • Lifting height: 4.500 mm

                              Options:

                              • High free lift (GAL) for DUPLEX poles 3.6m; High free lift (GAL) for TRIPLEX poles
                              • High free lift (GAL) for TRIPLEX mast 3.6m electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL16/55T

                              • Load capacity: 1.600 kg
                              • Lifting height: 5.500 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • High free lift (GAL) for TRIPLEX mast 3.6m electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • enPL 20/16

                              • Load capacity: 2.000 kg
                              • Lifting height: 1,600 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL 20/16

                            • Load capacity: 2,000 kg, lifting height: 1,600 mm, options: High free lift (GAL) for DUPLEX masts 3.6m; high free lift (GAL) for TRIPLEX masts; electronic limit switch (lift height limitation); load protection grille (dimensions: 1000 x 700 mm); proportional control of lowering speed of forks; pump for fast lifting of forks; rubber drive ring to improve traction; control of lifting movement from both sides; cold store version at -30°C; aquamatic system with connection; reinforced version: drive ring in VULKOLLAN; reinforced version: rear cover in metal
                            • PL 20/29

                            • Load capacity: 2,000 kg, lifting height: 2,900 mm Options: High free lift (GAL) for DUPLEX masts 3.6m; high free lift (GAL) for TRIPLEX masts; electronic limit switch (lift height limitation); load guard (dimensions: 1000 x 700 mm); proportional control of the lowering speed of the forks; pump for rapid lifting of the forks; rubber drive ring to improve traction; control of the lifting movement on both sides; cold storage version at -30 degrees C; aquamatic system with connection; reinforced version: drive ring in VULKOLLAN; reinforced version: rear cover in metal
                            • PL 20/36

                              • Load capacity: 2.000 kg
                              • Lifting height: 3,600 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL20/38T

                              • Load capacity: 2.000 kg
                              • Lifting height: 3,800 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL20/45T

                              • Load capacity: 2.000 kg
                              • Lifting height: 4.500 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts; electronic limit switch (lift height limitation); load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL 20/55T

                              • Load capacity: 2,000 kg
                              • Lifting height: 5,500 mm

                              Options:

                              • High free stroke (GAL) for DUPLEX masts 3.6m
                              • High free lift (GAL) for TRIPLEX masts
                              • Electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                            • PL25/25

                              • Load capacity: 2,500 kg
                              • Lifting height: 2,500 mm

                              Options:

                              • electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30 degrees C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                              • reinforced version: additionally reinforced wheel
                            • PL25/32

                              • Load capacity: 2.500 kg
                              • Lifting height: 3,200 mm

                              Options:

                              • electronic limit switch (lift height limitation)
                              • Load protection grid (dimensions: 1000 x 700 mm)
                              • Proportional control of the lowering speed of the forks
                              • Pump for quick lifting of forks
                              • Rubber drive ring for improved traction
                              • Double-sided control of the stroke movement
                              • Cold store version at -30Grad C
                              • Aquamatic system with connection
                              • reinforced design: drive ring in VULKOLLAN
                              • reinforced version: metal rear cover
                              • reinforced version: additionally reinforced wheel
                          • Low Lift Truck & Order Picker

                            • Pegasolift's electric high lift trucks have been developed and built as professional working aids. Our low and high lift trucks stand for countless innovations, high residual capacities and excellent manoeuvrability. The wide product range of Pegasolift high lift trucks has been developed to meet the needs of the customers thanks to precise functionality, reliability and safety. Each machine can be customized thanks to many extras and our ability to realize special customer projects.

                              Pegasolift high lift trucks are the solution for every type of storage. They are also available with a driver's platform. Here safety and comfort are guaranteed by the retractable driver's platform and the side safety brackets. The reliability of our machines allows our customers to greatly reduce operating and maintenance costs.

                                • Order picker OP 20/40

                                • The Pegasolift order picker is designed for use in department stores, the order picker may be operated without an additional driving licence. The cabin is also designed for the transport of larger or bulky goods. Due to the space available, the Pegasolift order picker can carry up to two people at the same time. The order picking lift truck is equipped with an automatic switch-off of the travel drive when the cabin is raised and a sensor that detects when something is under the cabin and automatically prevents it from being lowered. This ensures safety at all times.

                                  • Load capacity 2,000 kg
                                  • Lifting height: 4.000 mm
                                  • Options: fabric holder
                                  • Aquamatic system with connection
                                • Order picker OP 20/50

                                • The Pegasolift order picker is designed for use in department stores, the order picker may be operated without an additional driving licence. The cabin is also designed for the transport of larger or bulky goods. Due to the space available, the Pegasolift order picker can carry up to two people at the same time. The order picking lift truck is equipped with an automatic switch-off of the travel drive when the cabin is raised and a sensor that detects when something is under the cabin and automatically prevents it from being lowered. This ensures safety at all times.

                                  • Load capacity 2,000 kg
                                  • Lifting height: 6.000 mm
                                  • Options: fabric holder
                                  • Aquamatic system with connection
                                • Order picker OP 20/60

                                • The Pegasolift order picker is designed for use in department stores, the order picker may be operated without an additional driving licence. The cabin is also designed for the transport of larger or bulky goods. Due to the space available, the Pegasolift order picker can carry up to two people at the same time. The order picking lift truck is equipped with an automatic switch-off of the travel drive when the cabin is raised and a sensor that detects when something is under the cabin and automatically prevents it from being lowered. This ensures safety at all times.

                                  • Load capacity 2,000 kg
                                  • Lifting height: 6.000 mm
                                  • Options: fabric holder
                                  • Aquamatic system with connection
                                • Compact 18

                                  • Load capacity 1,800 kg with Panzellen compact battery
                                  • Aquamatik and integrated charger
                                • Compact 20

                                  • Load capacity 2,000 kg with Panzellen compact battery
                                  • Aquamatik and integrated charger
                                • TPL 16

                                • Load capacity: 1,600 kg,

                                  Options:

                                  • Double front castors
                                  • Rubber drive ring for improved traction
                                  • Cold store version at -30 degrees C (ATTENTION: battery charger 24V 10A EXTERNAL)
                                  • Aquamatic system with connection
                                • TPL 20

                                • Load capacity: 2.000 kg

                                  Options:

                                  • Double front castors
                                  • Rubber drive ring for improved traction
                                  • Cold store version at -30 degrees C (ATTENTION: battery charger 24V 10A EXTERNAL)
                                  • Aquamatic system with connection
                                • TPL 30

                                • Load capacity: 3,000 kg

                                  Options:

                                  • Double front castors
                                  • Rubber drive ring for improved traction
                                  • Cold store version at -30 degrees C (ATTENTION: battery charger 24V 10A EXTERNAL)
                                  • Aquamatic system with connection
                              • INOX

                                • Pegasolift, with 10 years of experience in material handling, has seen a growing demand for machines in the food, pharmaceutical and chemical industries. As a result of these industrial requirements, Pegasolift designed and developed the entire machine range in stainless steel.

                                  Pegasolift's stainless steel range meets all requirements in environments with health and hygiene regulations. The IP56 degree of protection allows easy cleaning and disinfection.

                                  The Pegasolift INOX pallet trucks are also available in a special version, the forks can be adapted at any time. All Pegasolift INOX machines are made of solid stainless steel, no coating but completely made of INOX AISI 304 stainless steel and are therefore legally approved for the transport of unpacked food.

                                    • W10/16 INOX

                                      • Load capacity: 1.000 kg
                                      • Lifting height: 1,600 mm

                                      Options:

                                      • Load protection grid (dimensions: 1000 x 700 mm)
                                      • Proportional control of the lowering speed of the forks
                                      • Rubber drive ring for improved traction
                                      • Cold store version at -30 degrees C
                                    • W10/29 INOX

                                      • Load capacity: 1.000 kg
                                      • Lifting height: 2,900 mm

                                      Options:

                                      • Load protection grid (dimensions: 1000 x 700 mm)
                                      • Proportional control of the lowering speed of the forks
                                      • Rubber drive ring for improved traction
                                      • Cold store version at -30 degrees C
                                    • W10/36 INOX

                                      • Load capacity: 1.000 kg
                                      • Lifting height: 3,600 mm

                                      Options:

                                      • Load protection grid (dimensions: 1000 x 700 mm)
                                      • Proportional control of the lowering speed of the forks
                                      • Rubber drive ring for improved traction
                                      • Cold store version at -30 degrees C
                                    • T14 INOX

                                    • T14 INOX (load capacity 1,400kg) is compact, handy and designed for easy operation. Since the device is made of AISI 304 INOX stainless steel, it can be used for the internal transport of food and pharmaceutical products. The device is equipped with IP56 to allow cleaning with pressurized water. Equipped with rubber tyres, it provides excellent traction even on wet soils.
                                    • PL13/16 INOX

                                      • Load capacity: 1,300 kg
                                      • Lifting height: 1,600 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL13/29 INOX

                                      • Load capacity: 1,300 kg
                                      • Lifting height: 2,900 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL13/36 INOX

                                      • Load capacity: 1,300 kg
                                      • Lifting height: 3,600 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL13/38T GAL INOX

                                      • Load capacity: 1,300 kg
                                      • Lifting height: 3,800 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL13/45T GAL INOX

                                      • Load capacity: 1,300 kg
                                      • Lifting height: 4,500 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • TPL20 INOX

                                    • COMPACT 20 INOX (load capacity 2,000kg) is compact, handy and designed for easy use. Made of AISI 304 INOX stainless steel, it can be used for the internal transport of food, pharmaceutical and chemical products. It is equipped with IP56 to allow cleaning by pressurized water. Equipped with rubber tyres, it provides excellent traction even on wet soils. The front rollers are made of nylon plyruethane.
                                    • PL16/16 INOX

                                      • Load capacity: 1,600 kg
                                      • Lifting height: 1,600 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL16/29 INOX

                                      • Load capacity: 1,600 kg
                                      • Lifting height: 2,900 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL16/36 INOX

                                      • Load capacity: 1.600 kg
                                      • Lifting height: 3,600 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL16/38T GAL INOX

                                      • Load capacity: 1.600 kg
                                      • Lifting height: 3,600 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                    • PL16/45T GAL INOX

                                      • Load capacity: 1.600 kg
                                      • Lifting height: 4.500 mm

                                      Options:

                                      • electronic limit switch (lift height limitation)
                                      • Load protection grid (dimensions: 1000 x 700 mm) INOX
                                      • Pump for quick lifting of forks
                                  • Route trains

                                            • Pegasolift Route Train

                                            • The Pegasolift route train can be driven with 2-5 trailers (max. load capacity of the complete train is 4t). Depending on the direction in which the trailers are attached, they can be loaded from the left or from the right.
                                              Advantages with raised transport trolley wheels while driving:

                                              • No damage or wear to the transport trolley wheels
                                              • Low noise and little space requirement due to very small turning radius
                                              • Optimum directional stability due to high-pressure tyres on the central axle of the Pegasolift route train frame.
                                        • Stacking: Mora electric stacker

                                          • Mora electric forklifts are equipped with advanced technology that enables them to reduce both emissions and operating costs. A saving that brings high performance.

                                            Complete freedom from pollutants for the environment and the health of the operators.
                                            Reduction of vibrations and noise levels and reduction of operating costs

                                              • Model: EP 50RA-60RA

                                              • Length: 3080 mm
                                                width: 1830 mm
                                                height: 2570 mm
                                                Lifting height: 3200 mm
                                                Capacity: 5000/6000 kg
                                                Load centre: 600 mm
                                              • Model: EP 70RA-80RA-100RA

                                              • length: 3395 mm
                                                width: 1860 mm
                                                height: 3100 mm
                                                Lifting height: 4000 mm
                                                Capacity: 7000/8000/10000 kg
                                                Load centre: 600 mm
                                              • Model: EP 120RA

                                              • Length: 4040 mm
                                                width: 2070 mm
                                                height: 3080 mm
                                                Lifting height: 3600 mm
                                                Capacity: 12000 kg
                                                Load centre: 600 mm
                                              • Model: EP 150RA-160RA

                                              • length 4260 mm
                                                width 2100 mm
                                                height 3300 mm
                                                Lifting height 4000 mm
                                                Capacity 15000/16000 kg
                                                Load centre 600 mm