During machining, specific demands for tool holding are laid down by each industry and application. The range varies from high-speed cutting to heavy roughing.
HAIMER offers the right solution and clamping technology for all specific requirements. Therefore, each year we invest approximately 10 percent of our turnover in research and development.
Our primary interest is to offer our customers sustainable solutions which enable a competitive advantage. This way, you can always maintain your competitive advantage in machining.
HAIMER grinding wheel adapters are manufactured just like all HAIMER tool holders - according to the highest quality standards and are characterized by the following features:
HAIMER Power Mill universal solid carbide endmills for machining steel, stainless steel and cast iron materials are available in a broad range of geometries and cutting edge designs. Latest PVD coating supply a maximum wear protection.
With Duo-Lock™, the modular interface of the latest generation for carbide tool heads, HAIMER offers a very flexible and universal tooling system. In combination with the Duo-Lock™ tool holders and shank extensions you always find the right solution for your application.
Only the high-precision balancing of tools and tool holders can make the complete capacity of the machines tool with regards to speed, cutting volume and produced surface finish accessible. Because balancing provides for fewer vibrations. It reduces wear of the spindle and tool, reduces the downtimes and increases process security.
The patented coil technology in conjunction with the intelligent power electronics form the core of HAIMER shrink fit technology.
Perfectly coordinated assembly groups and electronic components make sure that only the clamping area of the chuck is heated in the shrinking process.
This reduces the shrinking and cooling cycle to a minimum.
Only the HAIMER 3D-Sensor allows for the edge to be found on the first attempt. No calculating of the probe’s ball diameter is necessary – just Zero it out! Problems with mathematics or calculations are eliminated, allowing for fewer operator errors.
By using the HAIMER Centro centering bores and arbors is quick and precise.
HAIMER products represent quality and innovation in all sectors. Our innovative technical solutions represent the basis for the market success of our products.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK30 DIN 69871.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For clamping tools with cylindrical shank in HAIMER Power
Collets and ER collets according to ISO 15488.
The High Precision Collet Chuck is the collet chuck for the
highest machining capacity in high-speed manufacturing. The
optimized design with better construction combines high rigidity
with vibration dampening and noise-reducing features, giving
more protection to machines, spindles and tools. The universal
High Precision Collet Chuck is a unique high performance chuck
that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
Similar to DIN 6359-2 with taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
Similar to DIN 6359-2 with taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
According to DIN 6357 with taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
According to DIN 6358 with taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and inclined flat similar to DIN 1835-E and DIN 6535-HE.
DIN 6359-2 with taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with Morse Taper with drawbar thread according to DIN 228-1 form A.
Similar to DIN 6383 with taper SK40 form A DIN 69871.
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
Similar to DIN 6383 with taper SK40 form AD DIN 69871.
For manufacturing special tools in your factory.
With taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
Design:
Taper and groove are hardened and ground, the cylindrical part is soft.
For tapping preferably on NC milling machines. Axial length compensation on tension and pressure.
With steep taper SK40 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
Advantages:
For clamping tools with cylindrical shank, for left and right hand turn, clamping and loosening with a hexagon socket wrench.
With taper SK40 form ADB DIN 69871 ADB.
For holding chucks with three jaws e.g. according to DIN 6349.
According to DIN 238 with steep taper SK40 form A DIN 69871.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all kind of shrink fit units.
With steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
larger cutting depth
The long versions (A = 160 and 200 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
larger cutting depth
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines with 13 kW HD-Coil.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines
Shrink fit chuck suitable to all inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 13 kW shrink fit units.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
With steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For clamping tools with cylindrical shank in HAIMER Power
Collets and ER collets according to ISO 15488.
The High Precision Collet Chuck is the collet chuck for the
highest machining capacity in high-speed manufacturing. The
optimized design with better construction combines high rigidity
with vibration dampening and noise-reducing features, giving
more protection to machines, spindles and tools. The universal
High Precision Collet Chuck is a unique high performance chuck
that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
With steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
Similar to DIN 6359-2 with steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
Similar to DIN 6359-2 with steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
According to DIN 6357 with steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
According to DIN 6358 with steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and inclined flat similar to DIN 1835-E and DIN 6535-HE.
DIN 6359-2 with steep taper SK50 form ADB DIN 69871.
Form ADB means: central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with Morse taper with drawbar thread according to DIN 228-1 form A.
Similar to DIN 6383 with steep taper SK50 form A DIN 69871.
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
Similar to DIN 6383 with steep taper SK50 form AD DIN 69871.
For manufacturing special tools in your factory.
Withsteep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
Design:
Taper and groove are hardened and ground, the cylindrical part is soft.
For tapping preferably on NC milling machines. Axial length compensation on tension and pressure.
With steep taper SK50 form ADB DIN 69871.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
Advantages:
Fine-balancing for an extra charge.
For clamping tools with cylindrical shank, for left and right hand turn, clamping and loosening with a hexagon socket wrench.
With steep taper SK50 form ADB DIN 69871 ADB.
For holding chucks with three jaws e.g. according to DIN 6349.
According to DIN 238 with steep taper SK50 form A DIN 69871.
For holding tapers according to DIN 69871 AD SK 40
and JIS B 6339 BT 40.
With steep taper SK50 form AD DIN 69871.
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT30.
Shrink fit chuck suitable to all kind of shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
JIS B 6339 BT30.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For holding face mill cutters and milling cutters with radial driving slot DIN 1880.
Similar to DIN 6357 with steep taper JIS B 6339 BT30 form AD.
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT40 form ADB.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT40 form ADB.
Form ADB means: central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT40 form ADB.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, the Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
With taper JIS B 6339 BT40 form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
With taper JIS B 6339 BT 40 form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For holding face mill cutters and milling cutters with radial driving slot DIN 1880.
Similar to DIN 6357 with taper JIS B 6339 BT40 form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
According to DIN 6358 with taper JIS B 6339 BT40 form ADB.
Form ADB means: central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with Morse taper with drawbar thread according to DIN 228-1 form A.
Similar to DIN 6383 with taper JIS B 6339 BT40 form AD.
Without bore for tang Form AD
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
Similar to DIN 6383 with taper JIS B 6339 BT40 form AD.
Shrink fit chuck suitable to all kind of shrink fit units.
JIS B 6339 BT50 form ADB.
Form ADB means: Central coolant supply and coolant channels through the flange which can be sealed again.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The long versions (A = 160 and 200 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines with 13 kW HD-Coil.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines
Shrink fit chuck suitable to all inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 13 kw shrink fit units.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
With taper JIS B 6339 BT50 form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
With taper JIS B 6339 BT50 Form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
According to DIN 6359 with taper JIS B 6339 BT50 Form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
Similar to DIN 6357 with taper JIS B 6339 BT50 form ADB.
Form ADB means: central coolant supply and coolant channels on the collar which can be sealed again.
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
According to DIN 6358 with taper JIS B 6339 BT50 form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
For clamping tools with Morse taper with drawbar thread according to DIN 228-1 form A.
Similar to DIN 6383 with taper JIS B 6339 BT50 form A.
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
Similar to DIN 6383 with taper JIS B 6339 BT50 Form AD.
For manufacturing special tools in your factory.
With taper JIS B 6339 BT50 Form ADB.
Form ADB means: Central coolant supply and coolant channels on the collar which can be sealed again.
Design:
Taper and groove are hardened and ground, the cylindrical part is soft.
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
DIN 69882-2
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance
chuck that can also be used with standard collets.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
DIN 69882-2
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The long versions (A = 130 and 160 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The long versions (A = 130 and 160 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 13 kW shrink fit units.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 13 kW shrink fit units.
Shrink fit chuck suitable to all kind of shrink fit units.
Attention: Shrinking only with shrink and cooling adapter.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
Shrink fit chuck suitable to all inductive shrink fit units.
Power Mini Shrink Chuck is perfect for 5-axis-machining in the die & mould and in the medical industry. Very slim at the top like the HAIMER Mini Shrink Chucks, Power Mini Shrink is reinforced at the base. Thereby efficient milling is possible with an angled tool even at long protruding lengths.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
DIN 69882-2
For clamping cutters with cylindrical shank and inclined flat similar to DIN 1835-E and DIN 6535-HE.
DIN 69882-5
For clamping tools with Morse taper with drawbar thread according to DIN 228-1 form A.
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
For manufacturing special tools in your factory.
Design:
HSK is hardened and ground, the cylindrical part is soft.
For tapping preferrably an NC-milling machines.
Advantages:
Not compatible with system BILZ!
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-1
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The long versions (A = 160 and 200 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines with 13 kW HD-Coil.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines
Shrink fit chuck suitable to all inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 13 kW shrink fit units.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For high-precise clamping of tools with cylindrical shank with special collets. Also for shanks with clamping flats. Very useful for high-speed machining.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
For clamping shell end mills DIN 841 and DIN 1880 as well as angular milling cutters DIN 842 and cutters DIN 1830.
DIN 69882-2
For clamping cutters with cylindrical shank and inclined flat similar to DIN 1835-E and DIN 6535-HE.
DIN 69882-5
For holding tools with morse taper with thread according to DIN 228-1 form A.
For holding tools with Morse Tapers with tang according to DIN 228-11 form B.
For manufacturing special tools in your factory.
Design:
HSK is hardened and ground, the cylindrical part is soft.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
Shrink fit chuck suitable to all inductive shrink fit units.
The Power Shrink Chuck is the shrink fit chuck for highest machining capacity in high-speed manufacturing. The optimized design combines high rigidity with dampening vibrations, therefore giving more protection to machines, spindles and tools.
The long versions (A = 160 and 200 mm) with slim tips are especially versatile to use.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. The Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines with 13 kW HD-Coil.
Shrink fit chuck suitable to all high performance inductive shrink fit units.
For heavy machining applications it is now possible to replace the Weldon tool holders finally. The Heavy Duty Chuck is the shrink fit chuck for extreme cases. The contour is optimized for highest rigidity and clamping force.
To shrink with all HAIMER Power Clamp 20 kW shrink fit units and shrink fit machines
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For holding face mill cutters and cutters with radial driving slot DIN 1880.
DIN 69882-3
Shrink fit chuck suitable to all inductive shrink fit units.
Low cutting forces at highest rpm are characterizing the micro machining (die & mold, medical engineering, micro mechanical engineering). The slim and short design of the all new HSK–E25 series from HAIMER - which is well known from the HAIMER Mini Shrink tool holders – is perfectly suitable for the requirements of micro machining.
Available for Ø 3 - 12 in two different lengths
For clamping tools with cylindrical shank in ER collets according to ISO
15488.
Low cutting forces at highest rpm are characterizing the micro machining
(die & mold, medical engineering, micro mechanical engineering). The slim
and short design of the all new HSK–E25 series from HAIMER - which is well
known from the HAIMER Mini Shrink tool holders – is perfectly suitable for
the requirements of micro machining.
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-5
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools.
The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-5
Shrink fit chuck suitable to all kind of shrink fit units.
Shrink fit chuck suitable to all kind of shrink fit units.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
Shrink fit chuck suitable to all kind of shrink fit units.
DIN 69893-5
Shrink fit chuck suitable to all kind of shrink fit units.
Shrink fit chuck suitable to all kind of shrink fit units.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For clamping tools with cylindrical shank in HAIMER Power Collets and ER collets according to ISO 15488.
The Power Collet Chuck is the collet chuck for the highest machining capacity in high-speed manufacturing. The optimized design with better construction combines high rigidity with vibration dampening features, giving more protection to machines, spindles and tools. The universal Power Collet Chuck is a unique high performance chuck that can also be used with standard collets.
For clamping cutters with cylindrical shank and Weldon flat similar to DIN 1835-B and DIN 6535-HB.
DIN 69882-4
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882-3
Shrink fit chuck suitable to all kind of shrink fit units.
For clamping tools with cylindrical shank in ER collets according to ISO 15488.
DIN 69882-6
For holding face mill cutters and cutters with radial driving slot DIN 1880 and exceeding clamping diameter 40 clamping according to DIN 2079 is possible, too (4 additional tapping holes).
DIN 69882