Search for the bar feeder that is most suited to you using one or more of the search filters below.
In the case the research has not given the expected results, please contact IEMCA.
Simple, Precise, and Super Compact
The ELITE 112 SOFT TOUCH is an automatic high-performance bar feeder, for bars with diameters between 0.8 to 12.7 mm, ideal for applications on mobile headstock lathes for bar lengths from 450 to 3700 mm. The Elite is a premium bar feeder, simple to use. It is designed to meet the needs of those who are looking for the best possible performance and reliability, accurate selection of thin bars, adaptability when changeovers are needed, and a guarantee of rigidity even for the most challenging machinings.
Simple, Precise, and Superfast
The ELITE 220 SUPERFAST is an automatic high-performance bar feeder, for bars with diameters between 2 to 20 mm, ideal for applications on sliding headstock lathes for bar lengths from 450 to 3,700 mm. The Elite is a premium bar feeder, simple to use, precise, and fast. It is designed to meet the needs of those who are looking for the best possible performance and reliability, accurate selection of thin bars, adaptability when changeovers are needed, and a guarantee of rigidity even for the most challenging machinings.
The solution for machines with laser cutting
The Elite 220 WET is an automatic high-performance bar feeder, for bars with diameters between 2 and 20 mm, ideal for applications with machines equipped with laser cutters and for sliding headstock lathes equipped with laser cutting unit. It works tubes with lengths from 450 to 3,700 mm. The Elite is a premium bar feeder, simple to use, precise and very fast. It is designed to meet the needs of those who are looking for the best possible performance and reliability, accurate selection of thin bars, adaptability when changeovers are needed, and a guarantee of rigidity even for the most challenging machinings.
Simple, Fast, and Smart
The SMART 320 is an automatic high-performance bar feeder for working with sliding headstock lathes with bar diameters between 3 and 20 mm and lengths from 1,500 to 4,060 mm. The Smart is a bar feeder that is simple to use and fast.
Simple, Stiff, and Superfast
The Boss line, which accounts for more than 30,000 working units over the world, has been further improved to redefine the market standard once again. The BOSS 338 HD Superfast is an automatic bar feeder for bars with diameters between 3 and 38 mm, ideal for working with lathes with fixed or sliding headstock, available for bar lengths from 1,000 to 6,000 mm. It guarantees the maximum reliability without any compromises; the continuous improvement made to this product, the attention to detail, and more than 20 years of history have allowed the Boss line to set the market standard of quality in every working application.
Simple, Stiff, and Superfast
The Boss line, which accounts for more than 30,000 working units over the world, has been further improved to redefine the market standard once again. The BOSS 552 HD is an automatic bar feeder for bars with diameters between 5 and 51 mm, ideal for working with fixed headstock and sliding headstock lathes, available for bar lengths from 700 to 6,380 mm. It guarantees the maximum reliability without any compromises; the continuous improvement made to this product, the attention to detail, and more than 20 years of history have allowed the Boss line to set the market standard of quality in every working application.
The Short, Simple and Fast
The KID 80 is a short bar feeder for fixed headstock lathes, suitable for working bars with diameters between 5 and 80 mm and with lengths from 250 to 1,615 mm. It is simple to use and very fast.
Simple, Robust, with Sub-spindle mode
The KID 80+ is an automatic high-performance short bar feeder, ideal for applications on fixed headstock CNC lathes, even equipped with the sub-spindle. The KID 80+ can handle short bars with diameters between 5 to 80 mm, for bar lengths from 90 to 1.615 mm. It is designed to meet the needs of those ones are looking for accurate machining of short bars, adaptability to frequent work changeovers, and small occupied space. The KID 80+ is simple to use, robust and featured by the sub-spindle mode.
Single Rack
The MASTER 865 VERSO is an automatic bar feeder for bars with diameters between 8 and 65 mm, ideal for applications with fixed headstock lathes for bar lengths from 1,500 to 6,300 mm. The Master is a premium bar feeder, for those who are looking for high performance: elevated rigidity, simplicity of use, fast bar rotation, reduced time for retooling.
Single Rack
The MASTER 865 VERSO is an automatic bar feeder for bars with diameters between 8 and 65 mm, ideal for applications with fixed headstock lathes for bar lengths from 1,500 to 6,300 mm. The Master is a premium bar feeder, for those who are looking for high performance: elevated rigidity, simplicity of use, fast bar rotation, reduced time for retooling.
Single Rack, Hyper Flexible
The MASTER 80 HF is an automatic bar feeder for bars with diameters between 8 and 80 mm, ideal for applications with fixed headstock lathes, for bar lengths from 1,000 to 4,300 mm. The Master is a premium bar feeder, for those who are looking for something high performing: very rigid, simple to use, elevated velocity of bar rotation, reduced time for retooling, and maximum flexibility thanks to the HF (Hyper Flexible) technology which allows a wide range of bar diameters to be worked within the same guide channel.
Single Rack, Hyper Flexible
The MASTER 80 HF is an automatic bar feeder for bars with diameters between 8 and 80 mm, ideal for applications with fixed headstock lathes, for bar lengths from 1,000 to 4,300 mm. The Master is a premium bar feeder, for those who are looking for something high performing: very rigid, simple to use, elevated velocity of bar rotation, reduced time for retooling, and maximum flexibility thanks to the HF (Hyper Flexible) technology which allows a wide range of bar diameters to be worked within the same guide channel.
Easy, Robust, for heavy loads
The MASTER 100 VERSO is an automatic bar feeder for bars with diameters between 20 and 100 mm, ideal for applications with fixed headstock lathes, for bar lengths from 1,400 to 4,300 mm. The Master is a premium bar feeder, for those who are looking for something high performing: very rigid with large diameter bars, simple to use, with ergonomic loading, large magazine capacity, and elevated bar rotation speed.
Easy, Robust, for heavy loads
The MASTER 100 VERSO is an automatic bar feeder for bars with diameters between 20 and 100 mm, ideal for applications with fixed headstock lathes, for bar lengths from 1,400 to 4,300 mm. The Master is a premium bar feeder, for those who are looking for something high performing: very rigid with large diameter bars, simple to use, with ergonomic loading, large magazine capacity, and elevated bar rotation speed.
Simple, Flexible, and Superfast
The SIR 25 is an automatic bar feeder for multispindle lathes equipped of 6 and 8 spindles. It is perfect to load bars of diameters between 4 and 25 mm and a length between 2,500 mm and 4,300 mm. Sir allows to nimbly charge bars and manage the recovery of the remnant, without the necessity to use the stock reel. So that, it is possible to save floor space. Sir is a bar feeder simple to use, it guarantees maximum flexibility for bar diameters changeover available on the market (thanks to IEMCA’s patent for adjustable bobbins). It guarantees to reach the highest speed rotation. It is available with multi rack magazine (22 bars + 200 mm) and with bundle magazine (2 tons).
Simple, Flexible, and Superfast
The SIR 36 is an automatic bar feeder for multispindle lathes with 6 and 8 spindles. It's perfect to load bars of diameters between 5 and 36 mm and a length between 2,500 mm and 4,300 mm. SIR allows to nimbly charge bars and manage the recovery of the remnant, without the necessity to use the stock reel, and thus saving a lot of space on the ground. SIR is a bar feeder simple to use, it provides the maximum flexibility available on the market for the changeover of bar diameters (thanks to IEMCA patent of adjustable bobbins). It guarantees to reach the highest speed rotation. It is available with either multi rack magazine (11 bars + 200 mm) and with a bundle magazine (2 tons).
Simple, Flexible, and Superfast
SIR 52 is an automatic bar feeder for multi-spindle lathes equipped of 6 and 8 spindles. It is perfect for bars with diameters between 10 and 52 mm and lengths from 2,500 to 4,300 mm. The Sir allows bars to be easily loaded and manage the recovery of the remnant, without the necessity to use the stock reel and thus saving a lot of space on the ground. SIR is a bar feeder simple to use, it provides the maximum flexibility available on the market for the changeover of bar diameters (thanks to IEMCA patent of adjustable bobbins). It guarantees to reach the highest speed rotation. It is available with a bundle magazine (2 tons).
Simple, Flexible, and Superfast
SIR HEAVY DUTY is a model range of automatic bar feeders for Index multi-spindle lathes equipped of 6 and 8 spindles. This range has been developed using the platform of the automatic bar feeder Sir Heavy Duty, which is perfect to load bars with diameters between 4 and 52 mm and a length between 2,500 mm and 4,300 mm. The Sir Heavy Duty allows to load bars easily and the recovery of the remnant, without using the stock reel, and thus saving a lot of space on the ground. The Sir Heavy Duty is a bar feeder simple to use, which provides the maximum flexibility available on the market for the changeover of bar diameter (thanks to IEMCA's patent of adjustable bobbins) and it guarantees to reach the highest rotation speed. It is available with a multi rack and a bundle magazine (2 tons). It is equipped with a bar end drilling unit.
Simple, Universal, and Completely Autonomous
PRA 52 is a universal automatic bar feeder used to power the stock reel of multispindle lathes equipped with 5, 6, 8 spindles. It is able to load bars of diameter between 4 to 52 mm and a length between 1.500 mm and 4.200 mm, of round, square or hexagonal section. It is available with either multi rack magazine (4 floors of 450 mm, total 1,800 mm) and a bundle (2.5 tons). Over 3,000 customers worldwide have chosen this bar feeder for its ease of use and high productivity.