The machines of TP Series are perfect for the volume reduction of ELTs and the production of alternative fuels.
The machines of TP Series are the first that make a recovery of used tyres.
They can treat either car and truck tires up to 120 cm diameter, and some types of industrial and agricultural tires. Low-speed rotation is the winning feature of this shredders.
They consist of two rotors with opposite rotation, independent of each other. The cut is possible thanks to the action of the rotating blades on fixed blades installed on a traverse between the two rotors.
The machines can be equipped with a screen, which allows to obtain a product of defined dimensions, suitable for use as TDF.
The rotating blades and the fixed blades are interchangeable and can be sharpened. TP SERIES ELTs primary shredders
For material such as unsorted municipal waste and similar to urban, the shredder of the 'h' series completes the TP series.
Fixed blades are welded on a mobile central traverse. Fixed blades can be renewed by welding a wear-resistant material.
The central bar is designed to absorb any shock and it is released at presence of bulky intriturabile material. The traverse movement is effected by a hydraulic control unit dedicated.
The Molinari single-shaft shredder is an innovative machine in the field of grinding technology. It provides greater productivity than traditional fine shredders with presser, and may reduce energy consumption by up to 30%.
Unlike the other machines on the market, the Molinari single-shaft shredder does not need a presser to push the material against the rotor, thanks to the patented 'hollow rotor'. In fact, it is able to 'grab' the material without the aid of other devices, with the advantage of working in a continuous way and with a constant energy consumption.
Speed can be adjusted from 100 to 300 rpm, to use its full potential in terms of productivity and quality. Above the grinding chamber, a feeding device is mounted, which is composed of two rollers with teeth. They have the function of opening any agglomerate and bulky material, and particularly, of regulating the flow of material in the lower part where the cutting down takes place.
On the basis of the energy consumption, the rollers can stop interrupting the supply of the material, allowing the consumption to fall within the optimum parameters. It is equipped with a safety Release System designed to protect the rotor in case of presence of non-compliant materials.
The screen covers the 50% of the rotor. It is manufactured on Client's requirements. The model MT3000 is the perfect machinery for the production of RDF and other alternative fuels, because it guarantees the homogeneity and the final size of the treated material.
Helyos is the perfect machine for granules and alternative fuel steel-free. It is a granulator having a vertical axis with opposing cutting planes.
This technology makes it possible to easily separate the steel contained in tires.
The principle of operation is unique in the field of ELT recovery, in fact enables the shreds to be quickly expelled from the grinding chamber, avoiding overheating.
Harmonic steel liberated from rubber can be removed by a magnetic separator. Helyos allows to adjust the grain size of the output, according to the needs of the customer market.
The possibility of easy adjustment of the rotors allows to obtain 40 x 40 mm chips suitable for use as an alternative fuel, or a 15 mm granules for rubber recovery as a secondary raw material. In both cases, the steel that is released from the rubber can be economically enhanced.
The Molinari mill/grinder is an innovative machine in the grinding sector.
Our grinder allows to obtain higher output than the conventional mills (such as hammer mills, blade mills) or to save up the energy consumption to 30-50% while maintaining the same production. It is a high performance machine, especially with products hard to be treated (such as wood of medium and large size, polyethylene pipes, PVC) that can be ground with screens having 12,8,6,4,3 mm holes (for instance to obtain sawdust from wood).
All the parts of Molinari machines can be cooled: machine body, bearings support, fixed blades and rotor shaft. Therefore, also materials such as rubber can be processed without difficulties.
A presser can be installed in the back part of the loading hopper thus making it possible to grind drums and tanks without having to shear or pre-shred them. The motion of the presser is controlled by photocells installed on the loading hopper.