• Offer Profile
  • Dunkermotoren offers innovative, economic and high-quality drive technology up to 1,100 Watts output power.
    Our wide product and service range ensures you a high level of flexibility with standard components and customized system solutions:

    • Brushless DC servo motors/ Brush-type DC motors
    • Integrated power- and logic controllers
    • Planetary- and worm gearboxes
    • Linear direct drives
    • Encoders and brakes
Product Portfolio
    • brushed dc motors
    • Brushless DC motors - BG

    • Dunkermotoren's brushless DC motors (also referred to as EC motors) convince with high efficiency, highly dynamic acceleration and high power density. The BLDC motors are available with gearboxes, brakes and encoders.

      China Compulsory Certification number 2008010401283970
      Certificate UL number PRHZ2.E202145
      Rated voltage 12-360 VDC
      Rated speed 2300-4050 rpm
      Torque 2.6-150 Ncm
      Power rating 10-1.100 W
         
      The Dunkermotoren BG range of brushless, direct current motors (EC motors) are notable for:
      • Very long life
      • High efficiency
      • Highly dynamic acceleration
      • Good regulation characteristics
      • Wide speed range
      • High power density
      • Maintenance-free
      • Robust design
      • Integral Hall sensors for rotor position
      • Low moment of inertia
      • High degree of protection
      • Winding insulation - Class E or B
      • Neodymium magnets
    • brushed dc motors
    • Brushless DC motors - GR/G

    • Brushed DC motors from Dunkermotoren display low cogging torque, robust construction and low moments of inertia.

      China Compulsory Certification number 2008010401283970
      Certificate UL number PRHZ2.E202145
      Rated voltage 3-220 VDC
      Rated speed 1500-10000 rpm
      Torque 0.47-65 Ncm
      Power rating 3-240 W
         

      The Dunkermotoren GR/G range (commutated DC motors) are notable for:
      • Longer life than commutated motors from other manufacturers
      • Low detent torques
      • High efficiency
      • High dynamic acceleration
      • Good regulation characteristics
      • High power density
      • Maintenance-free
      • Robust design
      • Low moment of inertia
      • Motor insulation class E
      • Winding insulation class F
      • Extremely high short time overload capacity of the motor
      • Surface protection
      • Minimum interference radiation, optional interference versions
      • Protection up to IP 65
      • High quality due to fully automated production lines
    • brushed dc motors
    • AC motors - KD/DR

    • The motors are solidly designed and are maintenance-free for life. The multi-grooved stator contains a threefold winding which, together with the phase-shifting capacitor (series KD), creates a symmetrical rotating field at the rated working point of the motor. The rotor is of the squirrel-cage type. Two design diameters and a variety of design lengths provide rated torques from 0.75 to 31.5 Ncm in double-pole or four-pole versions.

      Rated voltage 230-400 VAC, 50Hz
      Power rating 5-86 W
      Torque 3.6-31.5 Ncm
      Variants 2/4 pole
         
         

      Special points:
      • Solid, maintenance-free
      • Reversible
      • Insulation to VDE 0530, insulating class F
      • High degree of protection, IP 54
      • Terminal box cover, can be turned by 4 x 90°
      • Built-in fan tor optimum cooling
    • brushed dc motors
    • Venetian blind drives - D

    • China Compulsory Certification number 2011010401516590
      Certificate UL number XEWR2.E168525

      • Single-phase capacitor motors for short time
        operation with mounted gear box
      • Solidly designed and maintenance free for life
      • With comfortable adjustment of the end
        positions
      • Single- and double shaft motors are available
      • With integrated (built in) temperature switch
      • With integrated electro magnetical brake
      • With cable 0.5m and mounted connector
    • brushed dc motors
    • Positioning drives - D

    • Positioning drives are motor-gearbox combinations optimised for repeated, short, powerful movements.

      Positioning drives are motor-gearbox combinations optimised for repeated, short, powerful movements, which are used in lifting tables, solaria, smoke-control shutters, venetian blinds.

      • With integral, adjustable cut-offs for two end positions
      • With integral temperature monitoring
      • With integral electromagnetic brake
      • With 0,5 m motor lead and moulded connector plug
    • brushed dc motors
    • DC venetian blind drives - DCD

    • The DC venetian blind drives are particularly designed for the use in interior blind applications.

      DC Drives for interior blinds:
      The Venetian Blind Drives series DCD22 - based on direct-current technology - are particularly designed for the use in interior blind applications.

      DCD22-2-G:
      Double shaft drive with integrated incremental encoder. The signals can be interpreted by the use of an external controller and used for end position and velocity control. The upper end position is limited by an external end switch (push-button).

      DCD-22-2-E:
      Double shaft drive with integrated controller. The integrated electronics controls upper / lower end position and velocity. The drive is connected to the power supply via an up / down push-button.

      The upper and lower end positions are adjustable; an additional external end switch is available for the upper end position.
    • brushed dc motors
    • Planetary Gearbox - PLG

    • Dunkermotoren's planetary gearboxes are notable for very compact design, low weight and excellent efficiency.

      Dunkermotoren develops and produces transmissions that are characterized by their smoothness, compact design and excellent efficiency.

      Planetary gearboxes (PLG) have the highest continuous torque capacity of all types of gearbox; at the same time they have a very compact form, low weight, and excellent efficiency. Self-centering planet gears ensure a symmetrical force distribution. The ring gear also forms the housing of the gearbox. The gearbox output shaft is supported in two ball bearings so that it can withstand high axial and radial loads. The gearboxes are customized, e.g. for use in especially low ambient temperatures, or as high-power gearboxes with reinforced output shafts, or with special lubricants for very long service life.

    • brushed dc motors
    • Worm gearbox - SG

    • Dunkermotoren's worm gearboxes are notable for very compact design, low weight and excellent efficiency.

      Dunkermotoren develops and manufactures gearboxes, which are notable for very compact design, low weight and excellent efficiency.

      Worm gearboxes (SG) are noted for their very quiet running. The worm-gear shaft has bearings on both sides. The gear components, made of bronze or steel, and the lubrication ensure a long service life at the rated torque. In many applications, the location of the output shaft at 90° to the motor shaft provides an optimum design solution. On request, worm-gearboxes can be supplied with a hollow output shaft.

    • brushed dc motors
    • SpiroTec gearbox - STG

    • Dunkermotoren's SpiroTec gearboxes are notable for very compact design, low weight and excellent efficiency.

      Dunkermotoren develops and manufactures gearboxes, which are notable for very compact design, low weight and excellent efficiency.

      Spiro Tec Gearboxes (STG) are gearboxes with right-angled output. The core of this product line is the spiral toothed gear set. This set makes it possible to responsibly transfer high torques with small axle distance in very little space. Both toothing parts are made out of hardened steel, so the gearbox works wear-free. That’s the reason why not only the toothing parts have got a very high lifetime, but also the lubricant stays free from contamination that again means a protection of the drive shaft. The housing is conducted in monoblock-design which leads to a very high precision of the gear meshing and an improved rigidity of the drive system. Impressive is the smooth running of the Spiro Tec gearbox that reaches the level of worm gearboxes.

    • brushed dc motors
    • Controllers / Gateways - RS/BGE

    • Dunkermotoren offer motors and gearboxes as well as control electronics and gateways.

      Dunkermotoren offer motors and gearboxes as well as control electronics and gateways. These include electronics for speed control and positioning to integrated PLC functions. Fieldbus and Ethernet-based communication interfaces are integrated in the drive.

    • brushed dc motors
    • Brakes - E

    • Motors in the BG, GR/G and KD/DR range can be fitted with rotor brakes. As standard, power-off brakes are employed, i.e. the brake operates when no voltage is applied and releases when current flows. Power-on brakes are available on request. IP 54 covers are available for all brakes. Combinations of incremental encoders and brakes are possible. Depending on the motor-brake combination, degrees of protection up to IP 65 are possible. To protect the DC contacts in your control system against arcing, we recommend the use of a freewheeling diode.

    • brushed dc motors
    • Absolute encoders - AE

    • Absolute encoders for BLDC motors
      Resol. single-turn 13 Bit
      Resol. multi-turn 12 Bit

      In special versions, motors of the product ranges BG 65/ S and BG 75 can be fitted with attached optical absolute encoder.

      » Optical absolute encoder
      » Multi-turn rotary encoder
      » Transmission via SSI interface to motor controller (integrated)
      » Robust and shock-resistant
      » Suitable for motors BG 65, BG 65 S and BG 75

    • brushed dc motors
    • Magnetic pulse generators - MG / ME

    • The magnetic pulse generators are applicable for speed detection, speed control and positioning.

      The magnetic pulse generators are applicable for speed detection, speed control and positioning in combination with corresponding
      electronics.
      The magnetic pulse generators are connected mechanically to the motor and transmit a series of impulses corresponding to the motor speed and direction via external leeds.
      The non-contact magnetic generator is equipped with hall sensors and magnet ring and is wearfree. A safe operation is possible due to the simple design, the magnetic signal activation and the starting signal which can be varied by the supply voltage.
      Most magnetic pulse generators are available on request with protection cover IP 54.

    • brushed dc motors
    • Digital Incremental Encoders - RE

    • Digital incremental encoders for stringent demands on the quality of regulation and positioning accuracy.

      Where stringent demands are placed on the quality of regulation and positioning accuracy, the DC motors are available with a digital
      incremental encoder.

      Incremental encoders have no sliding contacts and are not subject to wear. A light-emitting diode, a slotted metal disc, and a photo-diode array form a photoelectric circuit. An internal logic produces two squarewave signals phased at 90° to each other from the output of the photodiodes, with or without a reference impulse.

      Where the cable length between the encoder and controller or between the motor and encoder is more than 2.5 m, we recommend use of the RE .. TI, fitted with an additional power booster. The standard supply voltage for the incremental encoder is 5 VDC. As specials, 24V versions are also available. An IP54 cover is recommended as protection against external influences. In combination with motor BG 65, the incremental encoder can be incorporated in the IP65 extruded motor body. For the motors BG 45 | BG 75 an integral magnetic resistive incremental encoder is available (ME integrated).

    • brushed dc motors
    • ST | LINEAR MOTORS

    • The ST series is notable for:
      • Guided direct drive
      • 3 phase technology
      • Actuator, components and module
      • High power densit
      • High efficiency
      • Highly dynamic acceleration
      • Very long life-time
      • Freedom of maintenance
      • Robust design
      • Smooth controllability
      • High-quality rare-earth magnets
      • Integrated hall sensors for positioning
      • Mounting options for DIN/ISO 6431
      Continuous force 8,6-615 N
      Peak force up to 3690 N
      Speed up to 9,3 m/s
      Protection class > IP 65
      Repeatability < 20 μm
    • brushed dc motors
    • CASM | ELECTRIC CYLINDER

    • The CASM series is notable for:
      • Twist protected thrust rod
      • In-Line and parallel motor versio
      • Compact design
      • Maintenance free
      • Lead and ball screw version
      • Easy position configuration (PI Motor)
      • Several Bus-Interfaces available
      • Very long lifetime
      Continuous stall forces up to 5400 N*
      Peak force up to 5400 N*
      Speed up to 1 m/s
      Stroke lengths 50 – 800 mm
      Repeatability +/- 0,01 mm
      Acceleration up to 6 m/s²
      Supply voltage 12 – 48 VDC
    • brushed dc
    • LSM/LSG/LPA | SPINDLE MOTORS

    • The LSM/LSG/LPA series is notable for:
      • Lead screws combined with brushless/ brushed motors
      • Brushless DC motors combined with worm gearbox or planetary gearbox
      • Compact and space saving
      • Maintenance fre
      • Robust design for various applications
      • Universal mounting position
      • With or without integrated electronics
      • Typical Applications: Linear adjustment and positioning
      • Various installation position
      • Temperature range -40°C up to +80°C possible
      Axial forces up to 680 N
      Continuous force 650 N
      Speed up to 300 mm/sec
      Travel distance up to 1000 mm