Videos
Loading the player ...
  • Offer Profile
  • Senseair is a leading global provider of air and gas sensing technology. Our purpose is to make sense of air by providing the best possible measurement solutions, service and intelligence. You will find our sensors and solutions in the fields of indoor and outdoor air quality, alcohol screening, gas alarms, life science, and transportation.
Product Portfolio
  • Air and gas sensing technology

  • Miniature, low power, flexible or box built products? We have all you need. If you need help finding the right product for your specific application, don't hesitate to contact our dedicated team. Did you already find what you were looking for? Get a quote here in our customer support form or contact one of our sales representatives directly. You can always make adaptions to our products to fit your specific needs.
      • OEM / Sensor Core

          • Senseair Sunrise Automotive

          • A new generation NDIR sensors for automotive

            OPTICALSOLIDSTATE
            Electronics with no moving parts make this sensor robust and resistant to vibrations, which is ideal for automotive applications. Any application in a demanding environment or in environments with explosion risk is benefitted by the solid state design.

            ULTRALOWPOWER
            Thanks to the next generation LED technology, Senseair Sunrise has ultra-low power consumption: 6 times lower than other low power NDIR sensors on the markets. Average current 38μA 2.

            HIGHPRECISION
            There is a fundamental relationship between invested power and measurement resolution in all electronic sensors. The more electrical energy you invest in the measurement, the more accurate the reading will be. Therefore, it is a challenge to obtain high-resolution measurements using a low power sensor. Sunrise is the first NDIR sensor with LED technology that truly saves power while maintaining high precision. Accuracy (CO2) highest of ±200 ppm or ±10% (0 – 50°C) or ±20% (-40 – 50 – 85°C).

            SELFCORRECTION
            Mount and forget your sensor for the next 15 years and it will still be accurate, thanks to the built-in self-correcting ABC algorithm. Senseair has used Automatic Baseline Correction for three decades. Around 6 million sensors are providing data every millisecond, and, every 180 hour, they will calibrate themselves. With wireless applications, it will be even more important to rely on a sensor that you can mount and forget. Sunrise will continue the line of success.

          • Senseair Sunrise

          • A new generation NDIR sensors

            OPTICALSOLIDSTATE
            Electronics with no moving parts makes this sensor robust and resistant to vibrations. Any application in a demanding environment or in environments with explosion risk is benefitted by the solid state design.

            ULTRALOWPOWER
            Thanks to the next generation LED technology, Senseair Sunrise has ultra-low power consumption: 6 times lower than other low power NDIR sensors on the markets. Average current 38μA 2.

            HIGHPRECISION
            There is a fundamental relationship between invested power and measurement resolution in all electronic sensors. The more electrical energy you invest in the measurement, the more accurate the reading will be. Therefore, it is a challenge to obtain high-resolution measurements using a low power sensor. Sunrise is the first NDIR sensor with LED technology that truly saves power while maintaining high precision. Accuracy (CO2) ±30 ppm ±3% of reading.


            SELFCORRECTION
            Mount and forget your sensor for the next 15 years and it will still be accurate, thanks to the built-in self-correcting ABC algorithm. Senseair has used Automatic Baseline Correction for three decades. Around 6 million sensors are providing data every millisecond, and, every 180 hour, they will calibrate themselves. With wireless applications, it will be even more important to rely on a sensor that you can mount and forget. Sunrise will continue the line of success.

          • LP8

          • Miniature CO2 sensor module for battery-powered applications.A wide supply voltage range enables a variety of battery options.
            • 3.6 MC CHARGE PER MEASUREMENT (11.9MJ@3.3V)
            • MINIATURE SIZE (S8 FORMAT)
            • A WIDE SUPPLY VOLTAGE RANGE ENABLES A VARIETY OF BATTERY OPTIONS
            • ADJUSTABLE MEASUREMENT PERIOD BY HOST
            • ADJUSTABLE ABC PERIOD BY HOST
          • S8 COMMERCIAL

          • Small components - advanced design for indoor ventilation control and CO2 monitoring in commercial HVAC applications.
            • EASY INTEGRATION
            • VERY HIGH ACCURACY

            SenseAir® S8 Commercial is the ideal choice for indoor ventilation control and CO2 monitoring in commercial HVAC applications. The sensor is based on modern infrared technology (NDIR) and meassures CO2 levels with a very high accuracy. The SenseAir® S8 is designed for easy integration.
          • S8 RESIDENTIAL

          • Small components - advanced design for indoor ventilation control and CO2 monitoring in residential applicatio
            • EASY INTEGRATION
            • UART

            S8 Residential is the ideal choice for indoor ventilation control and CO2 monitoring in residential applications. The sensor is based on modern infrared technology (NDIR). The SenseAir® S8 Residential is designed for easy integration. ns.
          • S8 2%

          • Small components - advanced design for control- and alarm applications. The sensor can be integrated in a wide range of different alarm applications where you want to detect CO2, such as leakage detection.
            • EASY INTEGRATION
            • UART
          • S8 5%

          • Small components - advanced design for control- and alarm applications. The sensor can be integrated in a wide range of different alarm applications where you want to detect CO2, such as leakage detection.
            • EASY INTEGRATION
            • UART
          • S8 LP

          • More than 25 years experience of research and development within the field of infrared gas sensing has now brought us the smallest CO2 sensor, with NDIR-technique, in the world - S8 LP. The new sensor has excellent performance such as high accuracy and low power consumption. S8 LP is designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with UART digital interface. The sensor is maintenance-free and has an estimated life time of more than 15 years.
            • MINIATURE SIZE
            • INDIVIDUALLY CALIBRATED
            • MAINTENANCE-FREE
            • LONG TERM STABILITY
            • LOW POWER CONSUMPTION · 24 MONTHS WARRANTY
        • OEM / Sensor onBoard

            • K85

            • Small components - advanced design for indoor ventilation control and CO2 monitoring.
              • HIGH MEASUREMENT ACCURACY ·
              • COST EFFICIENT
              • 2 ANALOGUE OUTPUTS:
              • 0-5V/10V
              • 4-20MA
              • PREPARED FOR:
              • TERMINALS THERMISTOR
              • SLIDE POTENTIOMETER (TEMPERATURE)
              • OVERRIDE FOR FORCING VENTILATION
              • ABC

              K85 measures CO2 concentration in ambient air.
            • K30

            • K30 can be customised for a variety of sensing and control applications. The platform is designed for built-in applications in a host apparatus.
              • FLEXIBLE
              • 2 ANALOG OUTPUTS AND 2 DIGITAL OUTPUTS
              • EASY TO BE CONFIGURED
              • MAINTENANCE-FREE

              K30 can be customized for a variety of sensing and control applications. The platform is designed to be an OEM module for built-in applications in a host apparatus. K30 is a flexible product with 2 analog outputs and 2 digital outputs that can be configured with SADK or other custom software.
            • K30 3%

            • Senseair K30 3% can be customised for a variety of sensing and control applications. The platform is designed for built-in applications in a host apparatus.

              • FLEXIBLE
              • 0 TO 3%VOL MEASUREMENT RANGE
              • EASY INTEGRATION
              • EASY TO BE CONFIGURED
              • MAINTENANCE-FREE

              Senseair K30 3% can be customized for a variety of sensing and control applications. The platform is designed to be an OEM module for built-in applications in a host apparatus. K30 is a flexible product and can be configured with SADK or other custom software.

            • K30 FR

            • K30 FR is a high performance CO2 sensor module optimised for fast response time. The sample cell is well protected by a particle filter and is designed for fast diffusion without any need of external pump, in addition, there is a tube inlet to be able to feed on-line test gas through the sensor.
              • FAST RESPONSE TIME
              • DESIGNED FOR FAST DIFFUSION WITHOUT ANY NEED FOR EXTERNAL PUMP
              • TUBE INLET

              K30 FR is a high performance CO2 sensor module optimized for fast response time. The sample cell is well protected by a particle filter and is designed for fast diffusion without any need for external pump. In addition, there is a tube inlet to be able to feed on-line test gas through the sensor.
            • K33 ICB 30%

            • The Senseair ICB platform can be customised for a variety of sensing, control, and alarm applications. This platform is designed to be an OEM module for built-in applications in a host apparatus.  

              • Easy to be configured
              • Designed for built-in applications in a host apparatus
              • Maintenance-free
              • Low power module

              K33 ICB is targeted to bio-applications with required measurement range 0 to up to 30%vol CO2. As all other sensors from Senseair, the module is designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with a UART digital interface.

              Applications
              This platform is designed to be a low-power OEM module for integration into host apparatus, such as battery operated products and sensors with radio transmitters. Basically, any application where it is important to keep power consumption at a minimum without sacrificing the performance.
            • K33 ICB-F 10%

            • Senseair K33 ICB 10% is targeted on bio applications with required measurement range 0 to up to 10%vol CO2Senseair K33 ICB 10% can be supplied in diffusion modification or without tube IN/OUT. 

              • LOW-POWER CONSUMPTION
              • INDIVIDUALLY CALIBRATED
              • MAINTENANCE FREE
              • HIGH QUALITY
              • LONG TERM STABILITY

              The module is as all other sensors from Senseair designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with UART digital interface.

              This platform is designed to be a low power OEM module for integration into host apparatus, such as battery operated products and sensors with radio transmitters. Any application where power consumption is important to keep at a minimum without sacrificing the performance.

            • K33 BLG

            • The BLG is designed to measure and store records of environmental parameters such as CO2, RH and temperature. The sensor can be used in a wide range of applications; in food transportations, storages, incubators and other high concentration range applications.
              • TRIPLE SENSING: CO2, TEMP & RH
              • CONFIGURABLE SAMPLING PERIODS Configurable sampling and measurement periods
              • LOGGER FUNCTIONALITY
              • CONFIGURABLE LOGGING RESOLUTION

              BLG is a sensor module for measuring percentage range carbon dioxide concentration, ambient temperature and relative humidity. It is very easy and small to integrate and operate. It works by either battery-operation or continuous-power. The measurement interval and logging frequency can both be configured to fit a required time resolution. All this result in adaptable and very low average power consumption to fit many requirements; both regarding long battery-operated lifetime and low disturbing thermal output and self-heating.
            • K33 LP T/RH

            • K33 LP T/RH is a low-power module that measures CO2, temperature and humidity. The adjustable measurement interval, results in average power consumption that can be reduced to less than 52 μA (measurement 1/60 min).
              • MAINTENANCE-FREE
              • LOW POWER
              • INDIVIDUALLY CALIBRATED
              • LONG TERM STABILITY

              K33 LP T/RH is a low-power module that measures CO2, temperature and humidity. The adjustable measurement interval, results in average power consumption that can be reduced to less than 52 μA (measurement 1/60 min). The module is designed for low-power application. The module is as all other sensors from SenseAir designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with UART digital interface.
            • K33 ELG

            • K33 ELG is suitable for low power applications as the unit can be put into sleep-mode between measurements. The sensor measures and stores records of environmental parameters such as CO2, RH and temperature.
              • LOW-POWER CONSUMPTION
              • INDIVIDUALLY CALIBRATED
              • MAINTENANCE-FREE
              • HIGH QUALITY
              • LONG TERM STABILITY

              ELG is a sensor module for measuring CO2 concentration, temperature and relative humidity.

              ELG is designed for low-power application with demand for multiple measurement parameters. The adjustable measurement interval, results in average power consumption that can be reduced to less than 52 μA (measurement every 60 minutes).

              The module is as all other sensors from Senseair designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with UART digital interface
            • K33 LP T

            • LP is a low-power module that fits in any application where power consumption is important to keep at a minimum without sacrificing performance. The platform is designed for integration into host apparatus, such as battery operated products. The module also measures temperature, and humidity is an option.
              • LOW-POWER CONSUMPTION
              • INDIVIDUALLY CALIBRADED
              • MAINTENANCE-FREE
              • LONG TERM STABILITY

              K33 LP is a low-power module. The adjustable measurement interval, results in average power consumption that can be reduced to less than 52 μA (measurement 1/60 min). The module is designed for low-power application. The module is as all other sensors from SenseAir designed for high volume production with full traceability by sensor serial number on all manufacturing processes and key components. Every sensor is individually calibrated and is provided with UART digital interface. Optional features are RH/ Temp.
          • READY TO USE

              • ExploraPM2.5

                • LoRaWAN certified
                • IoT connected 
                • Cryptographic co-processor
                • Three sensors in one housing: PM, temp and RH 
                • Periodic measurement reports 
                • Cloud-based web portal, app or integration with HVAC control systems 
                • Powered via USB-cable 
                Senseair ExploraPM2.5 is a LoRaWAN certified, advanced and versatile 3-in-1 sensor designed for installation in the air-conditioned zone. It measures the concentration of particles, temperature and relative humidity in the ambient air. The data is encrypted and securely transmitted via LoRaWan to a cloud service. You can either use our dashboard service to display the data or design your own user interface utilizing the open API.

                Senseair ExploraPM2.5 combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Simple and easy to install, makes the Senseair ExploraPM2.5 ideal for retrofitting in existing buildings. 
              • ExploraCO2

                • Battery powered3 
                • Three sensors in one housing: CO2, temp and RH 
                • LoRaWAN certified, IoT connected using the leading radio interfaces on the market 
                • Industry leading security solution with cryptographic co-processor 
                • Periodic measurement reports and adaptive reporting 
                • Remote indoor air quality monitoring through the cloud-based web portal, app or integration with HVAC control systems 
                • No calibration needed 

                Senseair ExploraCO2 is a LoRaWAN certified, advanced and versatile 3-in-1 sensor, designed for installation in the air-conditioned zone. It measures CO2 concentration, temperature and relative humidity in the ambient air accurately without need for additional compensation. Adapting reporting when CO2 level changes more than 100ppm (higher than 750ppm). The data is encrypted and securely transmitted via LoRaWan to a cloud service. You can either use our dashboard service to display the data or design your own user interface utilising the open API. 

                Senseair ExploraCO2 combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and cost-effective environments for the occupants. Simple and easy to install without any wires, makes the Senseair ExploraCO2 ideal for retrofitting in existing buildings. 

              • Senseair Aercast

              • Battery-powered and IoT connected indoor air quality monitor with CO2, temperature & RH measurement.
                • CO2, temperature & RH
                • Battery-powered
                • IoT connected
                • IAQ indication

                Aercast is an advanced and versatile 3-in-1 transmitter designed for installation in the air-conditioned zone. It accurately measures CO2 concentration, temperature, and humidity in ambient air without the need for additional compensation true read. The data transmits to a BMS system or standalone controller using industry standard output signals and communication protocols.

                Aercast combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools, and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows a healthy, comfortable, and cost-effective environment for the occupants. It is flexible in design, with temperature control and combination of humidity control optional. Though suitable for use in many different energy-efficient ventilation strategies, Senseair welcomes any discussions for specific needs.

                Complies with ASHRAE standard 189.1 (±50 ppm @ 1,000 ppm of measured CO2 value).

              • tSENSE display

              • This versatile 3-in-1 transmitter combines all the necessary elements for effective climate control in commercial office buildings, hospitals, schools and other facilities. It measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation - true read.
                • TSENSE DISPLAY
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE is an advanced and versatile 3-in-1 transmitter designed for installation in the air- conditioned zone. It measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read. The data transmits to a BMS system or stand-alone controller using industry standard output signals and communication protocols.
              • tSENSE

              • This versatile 3-in-1 transmitter combines all the necessary elements for effective climate control in commercial office buildings, hospitals, schools and other facilities. It measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation - true read.
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE is an advanced and versatile 3-in-1 transmitter designed for installation in the air- conditioned zone. It measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read. The data transmits to a BMS system or stand-alone controller using industry standard output signals and communication protocols.
              • tSENSE VAV display

              • tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read.
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity.

                tSENSE VAV combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and cost-effective environment for the occupants. It is flexible in design with temperature control in combination with humidity control. Though suitable for use in many different energy-efficient ventilation strategies, we welcome any discussions for specific needs.

                Complies with ASHRAE standard 189.1 (±50ppm @ 1000ppm of measured CO2 value)
              • tSENSE VAV

              • tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read.
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity.

                tSENSE VAV combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and cost-effective environment for the occupants. It is flexible in design with temperature control in combination with humidity control. Though suitable for use in many different energy-efficient ventilation strategies, we welcome any discussions for specific needs.

                Complies with ASHRAE standard 189.1 (±50ppm @ 1000ppm of measured CO2 value)
              • tSENSE VAV

              • tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read.
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity.

                tSENSE VAV combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and cost-effective environment for the occupants. It is flexible in design with temperature control in combination with humidity control. Though suitable for use in many different energy-efficient ventilation strategies, we welcome any discussions for specific needs.

                Complies with ASHRAE standard 189.1 (±50ppm @ 1000ppm of measured CO2 value)
              • tSENSE VAV

              • tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity in the ambient air accurately without need for additional compensation ─ true read.
                • MAINTENANCE-FREE
                • THREE SENSORS IN ONE HOUSING
                • COLOUR TOUCH DISPLAY WITH POSSIBILITY OF CUSTOMIZABLE GUI
                • FLEXIBILITY - TEMPERATURE AND/OR HUMIDITY OPTIONAL
                • IMPROVED HOUSING DESIGN FOR EFFECTIVE MEASUREMENT
                • FIVE YEARS WARRANTY

                tSENSE VAV is an advanced and versatile three-in-one controller designed for installation in the air-conditioned zone. The unit measures CO2 concentration, temperature and humidity.

                tSENSE VAV combines all the necessary elements for effective climate control in commercial office buildings, hospitals, hotels, schools and other facilities. Using CO2-monitoring for demand control ventilation (DCV) allows healthy, comfortable and cost-effective environment for the occupants. It is flexible in design with temperature control in combination with humidity control. Though suitable for use in many different energy-efficient ventilation strategies, we welcome any discussions for specific needs.

                Complies with ASHRAE standard 189.1 (±50ppm @ 1000ppm of measured CO2 value)
              • eSENSE

              • eSENSE is a CO2 transmitter for climate control that fits directly on top of European electrical junction box standards. The unit is available both with and without display for fixed installation in the climate zone and helps you save money by decreasing your energy consumption while creating a healthier indoor air climate. Variations of this product can be found in the index.

                • TWO ANALOGUE OUTPUTS
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • COST-OPTIMISED FOR CONNECTION TO DDC:S
                • PREPARED FOR COMPLEMENTARY PASSIVE TEMPERATURE ELEMENT (MODEL -TR)
                • DIFFERENT HOUSING OPTIONS

                eSENSE is a simple, low-cost, state-of-the-art, infrared, maintenance-free carbon dioxide transmitter for installation in the climate zone or in the ventilation duct.

                eSENSE helps you save money by decreasing your energy consumption while creating a healthier indoor climate. eSENSE measures the carbon dioxide concentration in the ambient air up to 2,000 ppm and transforms the data into an analogue output.

                APPLICATIONS
                eSENSE is an extremely cost-optimised sensor solution. By controlling the ventilation based on actual demand, it helps you decrease energy consumption but still maintain a healthy indoor climate in both residential and commercial buildings.

              • eSENSE Slim

              • eSENSE Slim is used to measure indoor air carbon dioxide concentration.
                • TWO ANALOGUE OUTPUTS
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS.
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • COST-OPTIMIZED FOR CONNECTION TO DDC:S

                This product is an ultra-compact transmitter intended for factory mounting for both wall and duct applications with the protection class IP50. A 300 mm long cable connected to the PCB makes it possible to place the sensor where mounting is difficult.
              • eSENSE Duct Display

              • eSENSE Duct is an infrared and maintenance-free CO2 transmitters, for climate control of buildings and other processes. eSENSE duct is for installation in the ventilation duct.
                • TWO ANALOGUE OUTPUTS.
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS.
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS.
                • COST-OPTIMIZED FOR CONNECTION TO DDC:S.
                • PREPARED FOR COMPLEMENTARY PASSIVE TEMPERATURE ELEMENT (MODEL -TR).
                • DIFFERENT HOUSING OPTIONS.

                eSENSE Duct is an extremely cost-optimized sensor solution for climate control of buildings and other processes. By controlling the ventilation based on actual demand, it helps you decrease your energy consumption and yet have a healthy indoor climate! The different housing options makes the eSENSE available to almost any application or environment for example in greenhouses, residential and commercial buildings.
              • eSENSE II DISP

              • eSENSE II is a CO2 transmitter for climate control that fits directly on top of US electrical junction box standards. The unit is available both with and without LCD display for fixed installation in the climate zone.

                • TWO ANALOGUE OUTPUTS
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • COST-OPTIMIZED FOR CONNECTION TO DDC:S

                eSENSE II is a CO2 transmitter for climate control that fits directly on top of US electrical junction box standards. The unit is available both with and without LCD display for fixed installation in the climate zone. The unit is an extremely cost-optimized sensor solution for climate control in buildings and other processes. By controlling the ventilation based on actual demand, it helps you decrease your energy consumption and still have a healthy indoor climate. The different housing options make the eSENSE available to almost any application or environment (e.g. greenhouses, residential and commercial buildings).

              • eSENSE FAI II

              • eSENSE FAI (Fresh Air Indicator) is an infrared and maintenance-free carbon dioxide alarm for installation in areas where the carbon dioxide levels need to be monitored, such as classrooms and offices. According to various studies, adequate ventilation increases productivity and ability to learn. The product measures the carbon dioxide concentration in ambient air and alarms with sound and light when the levels exceed defined levels. Fits US standard J-boxes (visible red mute button on the front).

                • AUDIBLE ALARM
                • MUTE BUTTON
                • ONE ANALOGUE OUTPUT
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS

                eSENSE FAI is a cost-optimised sensor solution for climate monitoring in classrooms and offices, for example. According to many studies, adequate ventilation increases the productivity and ability to learn. It can also reduce the risk of temporary illness and downtime. By measuring CO2, you get a good indicator of when "fresh" outside air must be supplied for acceptable indoor air quality. The ventilation will then be based on actual demand. It helps you decrease the energy consumption and still have a healthy indoor climate. A CO2 concentration below 1,000 ppm should always be the target.

              • eSENSE Display

              • eSENSE is a CO2 transmitter for climate control that fits directly on top of European electrical junction box standards. The unit is available both with and without display for fixed installation in the climate zone and helps you save money by decreasing your energy consumption while creating a healthier indoor air climate. Variations of this product can be found in the index.
                • Two analogue outputs
                • Internal automatic self-diagnostics
                • Maintenance-free in normal applications
                • Cost-optimized for connection to DDC:s
                • Prepared for complementary passive temperature element (model -Tr)
                • Different housing options

                eSENSE is a simple, low cost, state-of-the-art, infrared, maintenance-free carbon dioxide transmitter for installation in the climate zone or in the ventilation duct.

                eSENSE helps you save money by decreasing your energy consumption while creating a healthier indoor climate! eSENSE measures the carbon dioxide concentration in the ambient air up to 2,000 ppm and transforms the data into an analogue output.

                APPLICATIONS

                eSENSE is an extremely cost-optimized sensor solution. By controlling the ventilation based on actual demand, it helps you decrease energy consumption but still maintain a healthy indoor climate in both residential and commercial buildings. The eSENSE family is also available to other normal applications or environments, for example in greenhouses.
              • eSENSE Duct Display

              • eSENSE Duct is an infrared and maintenance-free CO2 transmitter for climate control of buildings and other processes. The eSENSE Duct is for installation in the ventilation duct.

                • TWO ANALOGUE OUTPUTS
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • COST-OPTIMIZED FOR CONNECTION TO DDC:S
                • PREPARED FOR COMPLEMENTARY PASSIVE TEMPERATURE ELEMENT (MODEL -TR)
                • DIFFERENT HOUSING OPTIONS

                eSENSE Duct is an extremely cost-optimized sensor solution for climate control of buildings and other processes. By controlling the ventilation based on actual demand, it helps you decrease your energy consumption but still have a healthy indoor climate. The different housing options make the eSENSE available to almost any application or environment (e.g. greenhouses, residential and commercial buildings).

              • eSENSE FAI

              • eSENSE FAI (Fresh Air Indicator) is an infrared and maintenance-free carbon dioxide alarm for installation in areas where the carbon dioxide levels need to be monitored, such as classrooms and offices. According to various studies, adequate ventilation increases productivity and ability to learn. The product measures the carbon dioxide concentration in ambient air and alarms with sound and light when the levels exceed defined levels. Fits European standard J-boxes (mute button on the side).

                • AUDIBLE ALARM
                • MUTE BUTTON
                • ONE ANALOGUE OUTPUT
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS

                eSENSE FAI is a cost-optimized sensor solution for climate monitoring in classrooms and offices, for example. According to various studies, adequate ventilation increases the productivity and ability to learn. It can also reduce the risk of temporary illness and downtime. By measuring CO2, you get a good indicator of when "fresh" outside air must be supplied for acceptable indoor air quality. The ventilation will then be based on actual demand. It helps you decrease your energy consumption and yet have a healthy indoor climate. A CO2 concentration below 1,000 ppm should always be the target.

              • eSENSE Ind

              • eSENSE Ind is an infrared and maintenance-free CO2 transmitters, for climate control of buildings and other processes. eSENSE Ind is a wall mounted transmitter that fits IP54 environment and is applicable in most large industry spaces.
                • TWO ANALOGUE OUTPUTS.
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS.
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS.
                • COST-OPTIMIZED FOR CONNECTION TO DDC:S.
                • PREPARED FOR COMPLEMENTARY PASSIVE TEMPERATURE ELEMENT (MODEL -TR).

                eSENSE Ind is an extremely cost-optimized sensor solution for climate control of buildings and other processes. By controlling the ventilation based on actual demand, it helps you decrease your energy consumption and yet have a healthy indoor climate! The different housing options makes the eSENSE available to almost any application or environment for example in greenhouses, residential and commercial buildings.
              • aSENSE

              • aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO2 concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.
                • ASENSE
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS.
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN IT IS APPLIED IN A DEMAND CONTROL VENTILATION (DCV) STRATEGY.
                • INTERNAL AUTOMATIC SELF DIAGNOSTICS.
                • 2 ANALOGUE OUTPUTS AS STANDARD (V/MA). RELAY OUTPUT AS OPTION.
                • COST-EFFICIENT RS485 COMMUNICATION AS OPTION.
                • INTERNAL 2-CHANNEL LOGGER AS OPTION.

                aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO2 concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.
              • aSENSE VAV Display

              • aSENSE VAV is a stand alone controller that measures CO2 concentration and temperature in ambient air. It also has a terminal for extra functions for example manual override and it ́s prepared for Modbus. The unit is a key component for climate control of rooms with a varying number of people. Variations of this product can be found in the index.
                • COST-OPTIMIZED FOR DIRECT LINEAR CONTROL OF DAMPERS AND SPEED REGULATED FANS
                • ALTERNATIVE CONTROL OUTPUTS
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN APPLIED IN DEMAND CONTROLLED VENTILATION
                • INTERNAL AUTOMATIC SELF DIAGNOSTICS
                • MAINTENANCE-FREE
                • AVAILABLE WITH DIFFERENT MEASUREMENT RANGES AND SEVERAL HOUSING OPTIONS
                • SERIAL COMMUNICATION PORT FOR CONNECTION TO A PC OR A GSM MODULE AND LOCAL NETWORK

                APPLICATIONS
                A common application for aSENSE VAV is controlling ventilation in rooms occupied by people. The sensor is flexible and designed to suit many different ventilation strategies. It is a key component for energy-effective, healthy climate control of rooms with varying load like schools / nurseries, cinemas / theatres, sports centers etc.In museums and libraries etc, the ventilation control based on temperature and carbon dioxide measurements can be combined with control of humidity. To avoid condensation problems it is often necessary to measure humidity in air condi- tioning and in other cooling applications. With aSENSE VAV RH all parameters can be measured and controlled from the same unit. This sensor is a basic component to be used in a lot of different ventilation applications, as well as in industrial / agriculture process controls.
              • aSENSE VAV Duct Disp

              • aSENSE VAV Duct is a standalone controller with built-in sensors that measure CO2 and temperature for installa­tion in the ventilation duct. aSENSE VAV Duct has an industrial housing and is also prepared for Modbus.
                • COST-OPTIMIZED FOR DIRECT LINEAR CONTROL OF DAMPERS AND SPEED REGULATED FANS.
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN APPLIED IN DEMAND CONTROLLED VENTILATION.
                • INTERNAL AUTOMATIC SELF DIAGNOSTICS.
                • AVAILABLE WITH DIFFERENT MEASUREMENT RANGES AND SEVERAL HOUSING OPTIONS.
                • SERIAL COMMUNICATION PORT FOR CONNECTION TO A PC OR A GSM MODULE AND LOCAL NETWORK.

                A common application for aSENSE VAV Duct is controlling ventilation in rooms occupied by people. The sensor is flexible and designed to suit many different ventilation strategies. It is a key component for energy-effective, healthy climate control of rooms with varying load like schools / nurseries, cinemas/theatres, sports centers etc. Museums and libraries are rooms where the control of the ventilation is based on temperature and carbon dioxide measurements. It can be combined with control of humidity to secure the optimal environment of the objects. To avoid condensation problems it is often necessary to measure humidity in air conditioning and in other cooling applications.
              • aSENSE MIII Display MB

              • aSENSE MIII Disp is a controller with built-in sensors to monitor carbon dioxide and carbon monoxide simultaneously. With these parameters, the programmable unit can control ventilation rates and generate alarm signals, for example. The sensor can be configured with the UIP Software.
                • State-of-the-art infrared (NDIR) technology to measure carbon dioxide gas
                • State-of-the-art ENVIRONMENTALLY FRIENDLY ELECTROCHEMICAL SENSOR TO MEASURE CARBON MONOXIDE GAS.
                • Flexible control outputs for connection to DDC or direct control of dampers and speed regulated fans
                • Contributes to lower energy costs when applied in DemandControlledVentilation
                • Internal data recorder for environmental trend logging
                • Serial com port for connection to PC, GSM- module, or local network
                • Maintenance-free for more than 5 years
                aSENSE MIII is a controller with built-in sensors that monitors carbon dioxide simultaneously. With these parameters, the programmable unit can control ventilation rates, for example, and generate alarm signals for personal safety devices. aSENSE MIII is designed for both standalone operation, as well as being connected to larger building automation systems.

                Applications
                The MIII is applicable in most large spaces where combustionis the source of potential toxic danger (e.g. public garages, truck terminals, tunnels, and mines). It offers the possibility to combine CO and CO2 measurements, which not only guarantees public safety but also saves energy when applied to Demand Controlled Ventilation. The aSENSE MIII offers the possibility to regulate ventilation systems standalone, as well as being a sensor in a larger system. To cover larger spaces, several sensors could be joined in a simple relay loop and together control an intermittent two-speed exhaust fan, for example. The sensors can also be connected together in a MODBUS RS485 network (optional) for serial communication to a global control system or to a simple web Gateway for data presentation on the internet.
              • aSENSE MIII Display MB

              • aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO₂ concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.

                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN IT IS APPLIED IN A DEMAND CONTROL VENTILATION (DCV) STRATEGY
                • INTERNAL AUTOMATIC SELF-DIAGNOSTICS
                • 2 ANALOGUE OUTPUTS AS STANDARD (V/MA). RELAY OUTPUT AS AN OPTION
                • COST-EFFICIENT RS485 COMMUNICATION AS AN OPTION
                • INTERNAL 2-CHANNEL LOGGER AS AN OPTION

                aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.

              • aSENSE Duct

              • aSENSE Duct is an infrared and maintenance-free carbon dioxide transmitter for installation in the ventilation duct. The unit has an industrial housing (protection class IP65) with duct probe.
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN IT IS APPLIED IN A DEMAND CONTROL VENTILATION (DCV) STRATEGY
                • INTERNAL AUTOMATIC SELF DIAGNOSTICS
                • 2 ANALOGUE OUTPUTS AS STANDARD (V/MA). RELAY OUTPUT AS OPTION
                • COST-EFFICIENT RS485 COMMUNICATION AS OPTION
                • INTERNAL 2-CHANNEL LOGGER AS OPTION

                aSENSE Duct is an infrared and maintenance-free carbon dioxide transmitter for installation in the ventilation duct. The unit has an industrial housing (protection class IP65) with duct probe. The productis designed to control ventilation by transmitting the measured carbon dioxide and temperature value to the system´s Master or DDC. The transmitter is flexible and suits many different ventilation strategies. According to most building regulations, the fresh air flow should, in rooms where people stay more than occasionally, be at least 7 litres/sec and person.
              • aSENSE Ind

              • aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO2 concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.
                • MAINTENANCE-FREE IN NORMAL APPLICATIONS.
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN IT IS APPLIED IN A DEMAND CONTROL VENTILATION (DCV) STRATEGY.
                • INTERNAL AUTOMATIC SELF DIAGNOSTICS.
                • 2 ANALOGUE OUTPUTS AS STANDARD (V/MA). RELAY OUTPUT AS OPTION.
                • COST-EFFICIENT RS485 COMMUNICATION AS OPTION.
                • INTERNAL 2-CHANNEL LOGGER AS OPTION.

                aSENSE™ is an advanced transmitter for installation in the climate zone. It measures both CO2 concentration and temperature. The data is transmitted to a BMS system or controller and can be configured with UIP Software. The unit is prepared for Modbus. Variations of this product can be found in the index.
              • aSENSE GH Display

              • aSENSE GH “Green House” is a transmitter for installation in the climate zone. The special coated PCB and extra dust/ water protection lter make aSENSE GH suited for all kinds of greenhouses, incubators and similar environments. The unit measures both temperature and carbon dioxide concentration. Variations of this product can be found in the index.
                • STATE-OF-THE-ART NON-DISPERSIVE INFRARED (NDIR) TECHNOLOGY TO MEASURE CARBON DIOXIDE GAS
                • MAINTENANCE FREE IN NORMAL APPLICATIONS
                • ·MEMBRANE COVERED SAMPLE CHAMBER RESULTING IN A STABLE, RELIABLE AND HIGHLY ACCURATE CARBON DIOXIDE SENSOR
                • RELIABLE AND ACCURATE BUILT-IN NTC THERMISTOR FOR MEASURING TEMPERATURE
                • FULLY COATED PCB TOGETHER WITH A SPECIAL FILTER EQUIPPED HOUSING MAKES ASENSETM - GH PERFECTLY RESISTANT TOWARDS DUST AND HUMIDITY
                • 2 X PROGRAMMABLE MIXED SENSOR ANALOGUE OUTPUTS 0/2-10 VDC AND/OR 0/4-20 MA FOR CONNECTION TO REMOTE CENTRAL COMPUTER.
                • OPTIONAL RS485 DIGITAL INTERFACE TO PC AND ADVANCED CONTROL NETWORK SYSTEMS

                aSENSE GH measures both temperature and carbon dioxide concentration in the ambient air, transforms the data into digital output signals and sends these values to the control system.

                aSENSE GH is an all-digital, low-cost transmitter for installation in the climate zone. The special coated PCB and extra dust/water protection filter, makes aSENSETM - GH suited for all kinds of greenhouses, mushroom farms, incubators and similar environments.
              • aSENSE Ind Display 3%

                • Maintenance-free in normal applications
                • Contributes to lower energy costs
                • Cost-efficient RS485 communication as an option
                aSENSE Ind 3% Disp RL is a key component for climate control of buildings. The transmitter is flexible and suits many different ventilation strategies. It is also a cost efficient gas alarm sensor for spaces where carbon dioxide gas is a potential danger.

                The aSENSE Ind 3% Disp RL is designed to control ventilation by transmitting the measured carbon dioxide and temperature value to the Master of the system or DDC to save energy and ensure a good indoor environment.
              • aSENSE MIII Disp MB

              • aSENSE MIII Disp is a controller with built-in sensors to monitor carbon dioxide and carbon monoxide simultaneously. With these parameters, the programmable unit can for example control ventilation rates and generate alarm signals. The sensor can be con gured with the UIP Software.
                • STATE-OF-THE-ART INFRARED (NDIR) TECHNOLOGY TO MEASURE CARBON DIOXIDE GAS
                • STATE-OF-THE-ART HYBRID THICK FILM SENSOR (MMOS) TECHNOLOGY TO MEASURE CARBON MONOXIDE GAS.
                • FLEXIBLE CONTROL OUTPUTS FOR CONNECTION TO DDC, OR DIRECT CONTROL OF DAMPERS AND SPEED REGULATED FANS
                • CONTRIBUTES TO LOWER ENERGY COSTS WHEN APPLIEDIN DEMANDCONTROLLEDVENTILATION
                • INTERNAL DATA RECORDER FOR ENVIRONMENTAL TREND LOGGING
                • SERIAL COM PORT FOR CONNECTION TO PC, GSM- MODULE OR LOCAL NETWORK
                • MAINTENANCE FREE MORE THAN 5 YEARS

                aSENSE MIII is a controller with built-in sensors to monitor at the same time carbon dioxide and carbon monoxide. With these parameters, the program- mable unit can control, for example, ventilation rates, and generate alarm signals for personal safety devices. aSENSE MIII is designed for both stand- alone operation, as well as being connected to larger building automation systems.

                APPLICATIONS
                The aSENSE MIII is applicable in most large spaces where combustion is the source of the potential toxic danger, such as in public garages, truck terminals, tunnels and mines. It offers the possibility to com- bine CO and CO2 measurements which not just guarantees public safety, but also saves energy when applied to Demand Controlled Ventilation. The aSENSE MIII offers the possibility to regulate ventilation systems stand-alone, as well as being just a sensor in a larger system. To cover larger spaces, several sensors could be joined in a simple relay loop and together control an intermittent two- speed exhaust fan, for example. The sensors can also be connected together in a MODBUS RS485 network (optional) for serial communication to a global control system or to a simple webb Gateway for data presentation on the internet.
            • Accessories

                • Evaluation kit / SADK

                • The Senseair Development Kit is a configuration and test utility to assist you in your work with our Senseair Core products and eSENSE (K50 platform). The program UIP5 gives you access to the main features of the connected product. You also have the option to configure, log, and test the possibilities of most of our engine products.

              • APPLICATIONS

              • Our sensors can be used in a wide range of applications where only your fantasy sets the limitation. However, we have six main areas.
                  • ALCOHOL SENSING

                  • Scan - Exhale - Pass

                    We offer three solutions:
                    • Sober Workplace – Designed to support you in creating a Sober and safe work environment
                    • Sober Transportation – The modern solution to secure that no one drives a vehicle with alcohol in their blood.
                    • Sensor inVehicle – Development of integrated non obtrusive breath sensing technology.
                  • INDOOR AIR QUALITY

                  • This is our largest field of applications today, you will find our sensors in residential, commercial and official buildings. The primarily task is to save energy by regulating the air flow according to need. The more people in a building the more CO2 is exhaled. This means that i.e. a shopping mall most probably needs less ventilation on a Monday afternoon than the same time on a Friday. You can use our sensors in rooms or in ventilation drums.
                  • OUTDOOR AIR QUALITY

                  • Pollution is making a difference
                    As the earth is becoming more populated the destiny to our survival is in our hands. Urbanization shows clearly that in dense areas air pollution affects our own health and the environment. We do not have a solution for that, but we strongly believe that measuring is a good way to scientifically prove what we have to do. Our High resolution platform is a new generation infrared sensor technology that will open possibilities never explored before.
                  • SAFETY

                  • You find our sensors in alarm systems at restaurants, factories and mines. Urbanization, automation, smart cities will increase the need of sensors to make the right decisions but you will find alarms becoming more important than ever. Often there is no border between sensing/control and an alarm system.

                    Alarms are devices we need to trust and as a provider you want to make sure you can sleep well at night. Trust is part of a brand that candiminish with one incident. We can provide solutions sensing carbon dioxide, methane, ammoniac and freons. Major applications today are fast food restaurants, breweries, parking houses, personal safety equipment etc.

                    Look at alcohol for being a big safety issue as well, not only in cars but also at work places with a high safety factor.
                  • LIFE SCIENCE

                  • Life Science is a market where demand for controlled environment in green houses, chicken hatcheries etc is growing. You will also find more about fruit and vegetables under transportation. In the medical world you will find CO2 meters in anesthetic equipment but we also see a demand in patient related safety equipment. Health and fitness is a field where you can use CO2 as an indicator for metabolism or the best exercise cycle.

                    Definition of ”life science” a branch of science (such as biology, medicine, and sometimes anthropology or sociology) that deals with living organisms and life processes —usually used in plural.
                • Design your own branded solution

                • YOUR PRODUCT, YOUR BRAND, OUR TECHNOLOGY

                  We will help you create successful solutions for your market, no matter if it aims to improve indoor air quality, extend the range of your car, build intelligence into your alarm product, or save lives related to drunk driving. We don't compete with you; we use our tried and tested technology to improve your unique solution with your own brand. Our concept is divided into three simple steps - from sensor core to a complete inCase solution with all its intelligence.