Navigation : EXPO21XX > RENEWABLE ENERGY 21XX > H44: Hydraulics > ENERPAC
Videos
Loading the player ...
  • Offer Profile
  • Enerpac is the recognized global leader in high-force tools & equipment used in industrial markets.

    Our comprehensive family of tools and equipment deliver reliable and dependable performance for virtually any industrial segment, from the smallest cylinder to computer-controlled systems for lifting huge structures.
Product Portfolio

  • Cylinders, Lifting Products and Systems

  • Enerpac provides the largest selection of cylinders and lifting systems, fully supported and available through the most extensive network of distributors worldwide. We have a solution for virtually any application – lifting, pushing, pulling, bending or holding – in most industrial and commercial work environments. Enerpac offers hundreds of different configurations of cylinders and lifting systems, plus products ranging from jacks and lifting bags, for portability and tight fits, to engineered systems for precise control over multiple lift points.

    • General Purpose Cylinders

    • RC, RSM, RCS, CLP, RCH, RRH, BRC, BRP, SC-series

      Capacity: 5 - 500 tons
      Stroke: .25 - 14.25 inches
      Max. Pressure: 10,000 psi

    • Lightweight Aluminum Cylinders

    • Utilizing the latest in alloy technology, high-strength coatings, seal design and bearing materials, Enerpac aluminum cylinders can change the way you think about your cylinder applications. Our cylinders provide the strength of steel with the weight, transportability and easy positioning of aluminum.

      Capacity: 20 - 150 tons
      Stroke: 1.97-7.87 inches
      Max. Pressure: 10,000 psi

    • High Tonnage Construction Cylinders

    • Capacity: 50 - 1,000 tons
      Stroke: 1.97 - 11.81 inches
      Max. Pressure: 10,000 psi

    • Low Height Cylinders

    • CLP, RSM, RCS-series

      Capacity: 5 - 500 tons
      Stroke: .25 - 2.44 inches
      Max. Pressure: 10,000 psi

    • Hollow Plunger Cylinders

    • RCH, RACH, RRH-series

      Capacity: 12 - 150 tons
      Stroke: .31 - 10.13 inches
      Center Hole: .77 - 3.13 inches
      Max. Pressure: 10,000 psi

    • Long Stroke / High Cycle Cylinders

    • RR, RD, AD-series

      Capacity: 4 - 500 tons
      Stroke: 1.13 - 48.00 inches
      Max. Pressure: 10,000 psi

    • Specialty Lifting Products

    • LPC, LB, PR, JHA, JH, LW, SOH-series

      Capacity: 5 - 150 tons
      Stroke: 2 - 6.18 inches
      Max. Pressure: 10,000 psi

    • Lifting Systems

    • PR, SLS, SHS, BLS-series

      Capacity: 10 - 1000 tons
      Max. Stroke: 6 - 19.6 inches
      Max. Pressure: 10,000 psi

  • Pumps and Valves

  • ENERPAC combines the widest selection of hydraulic pumps available with reliability, durability and built-in safety to make it easy to find the right pumps for any application requiring applied force. Enerpac features over 1,000 different pump configurations, including manual, battery powered, electric-, air-, and gasoline-powered models, perfectly matched to Enerpac’s family of tools and accessories. These pumps offer a lifetime warranty, and are designed to make you more productive and efficient in the work you perform.

    • Manual Pumps

    • Portable, durable, easy-to-use. Enerpac’s large selection of manual pumps makes it easy to find the most effective compact pump.

      Reservoir: 18 - 453 in3
      Flow: .037 - .58 in3/stroke
      Max. Pressure: 1,500 - 40,000 psi

    • Electric Pumps

    • Enerpac’s wide range of electric-driven hydraulic pumps provide durability, high performance and economy.

      Reservoir: .5 - 25 gal.
      Flow: 8.0 - 200 in3/min.
      Max. Pressure: 10,000 ps

    • Air Hydraulic Pumps

    • Enerpac’s air-driven hydraulic pumps all feature rugged construction, high-efficiency designs and proven reliability.

      Reservoir: 1.0 - 305 in3
      Flow: 8 - 80 in3/min
      Max. Pressure: 10,000 - 21,750 psi

    • Gasoline Pumps

    • Enerpac’s gasoline-driven hydraulic pumps are designed for high efficiency, with higher by-pass pressure for improved productivity. From small portable and high-performance transportable configurations, to large capacity models.

      Reservoir: 2.5 - 25 gallon
      Flow: 1.5 - 200 in3/min
      Engine Size: 7.1, 8.5 and 17.0 Ft.lbs
      Max. Pressure: 10,000 psi

    • Hydraulic Valves

    • Available in a wide variety of models and configurations, Enerpac has the correct valve to match your application.

      Pressure: 0 - 10,000 psi
      Flow Max.: 920 - 1040 in3/min
      Voltage: 24, 115, 230 V

  • System Components

  • Enerpac’s System Components are the perfect complement to Enerpac’s cylinders, tools and pumps. The most extensive range of components, available and supported worldwide, completes the Enerpac hydraulic system to provide dependable and efficient performance. Every one of these components - gauges, fittings, manifolds, hoses, couplers and hydraulic oil – is manufactured to the highest standards, in keeping with Enerpac’s focus on reliability and commitment to safety.

    • Gauges and Accessories

    • Pressure Range: 0 - 50,000 psi
      Face Diameter: 2.5 - 6.4 inches
      Accuracy: ± 0.2% - 1.5%

    • Hoses, Couplers and Oil

    • Contents: 1 quart - 55 gallon

      Inside Diameter: .25 - .38 inch
      Length: 2 - 50 feet
      Max. Pressure: 10,000 psi

      Max. Flow: 2,500 in3/min
      Thread: 1/4" and 3/8" NPTF
      Max. Pressure: 10,000 psi

    • Manifolds and Fittings

    • Connection: 6 and 7 oil ports
      Oil Ports: 3/8" NPTF
      Max. Pressure: 10,000 psi

      Ports: 2 - 4
      Max. Pressure: 10,000 psi

    • Hydraulic Valves

    • Pressure: 0 - 10,000 psi
      Flow Max.: 920 - 1040 in3/min
      Voltage: 24, 115, 230 V

  • Presses

  • Enerpac’s System Components are the perfect complement to Enerpac’s cylinders, tools and pumps. The most extensive range of components, available and supported worldwide, completes the Enerpac hydraulic system to provide dependable and efficient performance. Every one of these components - gauges, fittings, manifolds, hoses, couplers and hydraulic oil – is manufactured to the highest standards, in keeping with Enerpac’s focus on reliability and commitment to safety.

    • Press Accessories for VLP, XLP, BPR-series

    • Capacity: 10 - 200 ton

    • A, IP-Series, Arbor, C-Clamp and Bench Frame Presses

    • Capacity: 5 - 30 ton
      Max. Daylight and Width: 15.38 and 15.00 inches
      Mounting Capabilities: Fixed or Portable
      Max. Pressure: 10,000 psi

    • TM, LH-Series, Tension Meter and Load Cells

    • Capacity: 2,000 - 200,000 lbs
      Accuracy: ± 2%

    • IPR-Series, Roll Frame Presses

    • Capacity: 50 - 200 tons
      Max. Daylight and Width: 51.00 & 48.00 inches
      Max. Pressure: 10,000 psi

    • BV-Series, Hydraulic Bench Vise

    • Max. Force: 5 tons
      Max. Jaw Opening: 8 inches
      Jaw Width: 8 inches
      Max. Pressure: 10,000 psi

    • IP-Series H-Frame Presses

    • Capacity: 10 - 200 tons
      Max. Daylight and Width: 54.5 - 48.0 inches
      Max. Pressure: 10,000 psi

    • IP-Series, Custom Built Presses

    • Capacity: 10-200 tons
      Max. Daylight and Width: 54.5 & 48.0 inches
      Max. Pressure: 10,000 psi

  • Pullers

  • ENERPAC offers a complete line of pullers with the widest range of sizes, capacities and styles. Whether your application requires mechanical, hydraulic or the patented Posi Lock® system, Enerpac can satisfy your requirements. Made of high strength steel alloys, you can depend on Enerpac pullers to provide years of trouble-free operation, even in the harshest environments.

    • EP-Series, Posi Lock® Mechanical Pullers

    • Capacity: 2 - 40 tons
      Max. Reach: 4.00 - 14.00 inches
      Max. Spread: 0.50 - 25.00 inches

    • EPH-Series, Posi Lock® Hydraulic Grip Pullers

    • Capacity: 10 - 50 tons
      Max. Reach: 8.0 - 14.0 inches
      Max. Spread: 0.75 - 25.0 inches
      Max. Pressure: 10,000 psi

    • EPH-Series, Posi Lock® 100 Ton Hydraulic Grip Pullers

    • Capacity: 100 tons
      Max. Reach: 48 inches
      Max. Spread: 70 inches
      Max. Pressure: 10,000 psi

    • BHP-Series, Bearing Puller

    • Capacity: 8, 20, 30 and 50 tons
      Max. Reach: 4.33 - 5.71 inches
      Max. Spread: 4.33 - 14.17 inches
      Max. Pressure: 10,000 psi

    • BHP-Series, Bearing Cup Puller

    • Capacity: 8, 20, 30 and 50 tons
      Max. Reach: 4.33 - 5.71 inches
      Max. Spread: 4.33 - 14.17 inches
      Max. Pressure: 10,000 psi

    • BHP-Series, Grip Puller Sets

    • Capacity: 8, 20, 30 and 50 tons
      Max. Reach: 9.92 - 27.56 inches
      Max. Spread: 9.84 - 43.30 inches
      Max. Pressure: 10,000 psi

    • BHP-Series, Cross Bearing Puller Sets

    • Capacity: 8, 20, 30 and 50 tons
      Max. Reach: 14.0 - 34.00 inches
      Max. Spread: 10.50 - 22.46 inches
      Max. Pressure: 10,000 psi

    • BHP-Series, Master Puller Sets

    • Capacity: 8, 20, 30 and 50 tons

  • Specialty Tools

  • Enerpac offers the most complete line of Specialty Tools in the industry. Each is designed to efficiently and safely solve unique maintenance and production challenges such as bearing & wheel pulling, pipe bending, cutting, spreading and tensioning applications. Enerpac’s Specialty Tools are available in both hydraulic and mechanical configurations, and are also available as complete sets – the precise matching of tools, pumps and system components – to make your work easier and safer to perform.

    • WR, A-Series, Hydraulic Wedgie and Spread Cylinders

    • Capacity: 0.75 - 1.50 ton
      Tip Clearance: 0.50 - 1.38 inches
      Max. Spread: 3.70 - 11.50 inches
      Max. Pressure: 10,000 psi

    • STB-Series, Pipe Bender Sets

    • Nominal Pipe Size: 0.5 - 4 inches
      Max. Bend Angle: 90º
      Max. Pressure: 10,000 psi

    • WMC-Series, Self-Contained Hydraulic Cutters

    • Capacity: 3 - 20 tons
      Max. Material Diameter: 0.38 - 3.38 inches
      Max. Pressure: 10,000 psi

    • WHC, WHR-Series, Hydraulic Cutterheads

    • Capacity: 3 - 20 tons
      Cutting Capacity: 0.50 - 4 inches
      Max. Pressure: 10,000 psi

    • CM-Series, Industrial Storage Cases

    • Case Size: .67 - 16 Cubic Ft.

    • SP-Series, Lightweight Hydraulic Punch

    • Capacity: 35 tons
      Hole Sizes: 0.31 - 0.81 inches
      Max. Pressure: 10,000 psi

    • LW-Series, Vertical Lifting Wedge

    • Min. Clearance: .39 inches
      Max. Lift Height: 2.72* inches
      Max. Force: 16 tons
      Max. Pressure: 10,000 psi

    • SP-Series, 50 Ton Hydraulic Punch

    • Capacity: 50 tons
      Hole Sizes: 0.53 - 1.03 inches
      Max. Pressure: 10,000 psi

    • ELP, ER, ES-Series, Heavy-Duty Caterroller Load Skates

    • Max. Carrying Capacity: 80 tons

    • MS-Series, Maintenance Sets

    • Capacity: 2.5 - 12.5 tons
      Max. Pressure: 5,000 psi

    • ST-Series, Tool-Pump Sets

    • Punch Sets: 35 tons
      Cutter Sets: 4-20 tons
      Pipe Benders: 1/2-4 inches
      Max. Pressure: 10,000 psi

    • DA, PTJ-Series, Mono-Strand Stressing Tools

    • Capacity: 20 - 30 tons
      Stroke: 8.5 - 10 inches
      Strand Diameters: .375 - .60 inch
      Max. Pressure: 6,500 - 10,000 psi

    • MS-Series, Base, Collar and Plunger Attachments

    • Capacity: 2.5 - 12.5 tons
      Pressure: 5,000 psi

    • MS-Series, Chains and Attachments for Pulling

    • Capacity: 2.5 - 12.5 tons
      Pressure: 5,000 psi

    • MS-Series, Tubes, Connectors and Adaptors

    • Capacity: 1.0 - 12.5 tons
      Pressure: 5,000 psi

  • Bolting

  • Enerpac’s comprehensive range of hydraulic and mechanical Bolting products provides precise & effective force to make your work more productive, safer, and easier to perform. From joint assembly and controlled tightening to joint separation, Enerpac’s bolting tools & accessories offer the solution best-suited to the project, available from one source.

    • Joint Assembly Tools

    • Capacity: 12 - 100 tons
      Stroke: .31 - 6.13 inches
      Center Hole: .77 - 3.11 inches
      Max. Pressure: 10,000 psi

      Bolt Hole Range: 11/16 inch - 2-1/8 inches
      Flange Wall Thickness: 11/16 - 8 inches
      Max. Force: 0.3 - 5.5 tons

    • Controlled Tightening Tools

    • Fasteners must be tightened to the correct force to prevent failure in service. The accurate application of load to a fastener assembly is critical to achieving joint integrity. Enerpac’s Bolting solutions provide a comprehensive range of applied force controlled tightening options best matched to your application.

      Max. Torque: 19,875 - 35,000 Ft.lbs
      Square Drive:3/4 – 2 1/2 inches
      Nose Radius: .99 - 4.52  inches
      Max. Pressure: 10,000 - 21,750 psi

    • Joint Separation Tools

    • Correct joint disassembly is especially important during maintenance operations. Separation of stubborn joints is often a laborious and time-consuming task. Traditional methods may carry the risk of personal injury or damage to expensive joint components. Our wide range of Joint Separation equipment is designed specifically to provide quicker, simpler and safer solutions.

      Capacity: 0.75 - 192.5 ton
      Tip Clearance: 0.50 - 1.38 inches
      Max. Spread: 0.24 - 11.50 inches
      Max. Pressure: 10,000 - 11,600 psi

    • Associated Pumps

    • Enerpac offers a wide range of hydraulic wrench pumps, with electric or air motors to power single or double-acting hydraulic torque wrenches. Safe and efficient new Enerpac Z-Class ZU4T-series pumps with universal electric motor made especially for repetitive bolting tasks.

      Reservoir: 0.5 - 10 gal.
      Flow: 8 - 120 in3/min.
      Max. Pressure: 10,000 - 21,750 psi

  • Workholding

  • The full range of well-designed, versatile and reliable Workholding products from Enerpac provides users with dependable production automation solutions in virtually every type of manufacturing process. Global distribution yet local technical support ensure that your application needs will be solved successfully. Exclusive designs like our Collet-Lok® products series, and a wide selection of high-performance power sources, bring innovation and reliability to your project challenges.

    • Swing Cylinders

    • Enerpac Swing Cylinders offer the benefits of precision and maximum clamping force, plus application flexibility through our wide range of products. Their flexible design allows easier connections and precise positioning, plus simple installation and removal. Available in single- and double-acting models.

      Clamp Force: 475 - 7600 lbs
      Stroke: .25 - 2.50 inch
      Pressure: 500 - 5,000 psi

    • Work Supports

    • Enerpac Work Supports combine the multiple mounting configurations for design flexibility, corrosion resistance, and low-pressure lock-up to plug into mechanical tool hydraulic systems. Our exclusive Collet-Lok design allows the support to maintain its position even after the hydraulic force is removed.

      Force: 1650 - 10,000 lbs
      Stroke: .38 - .65 inch
      Pressure: 700 - 5000 psi

    • Linear Cylinders

    • Enerpac has the most complete line of Linear Cylinders – compact short-stroke spring return cylinders to heavy-duty double-acting automation cylinders. Whether you need to push it, pull it, clamp it, punch it, stamp it, press it, or hold it in place for days at a time, Enerpac has the right linear cylinder.

      Force 380 - 62,850 lbs
      Stroke 0.09 - 12 inch
      Pressure 500 - 10000 psi

    • Power Sources

    • From simple manual pumps, to heavy-duty, and even customizable electric-driven hydraulic pumps, Enerpac has a wide range of power sources to meet your specific needs. Combined with a wide range of accessories, Enerpac power sources are versatile, durable and designed for long life and reliability.

    • Valves

    • A complete line of valves & accessories to complement any hydraulic system. This includes manual and electric directional valves, plus pressure control, flow control and specialty valves to satisfy your application needs.

      Pressure: 0 - 10000 psi
      Flow: 250 - 1830 in3/min
      Voltage: 24 - 230 VAC

    • System Components

    • The complete line of Enerpac’s Systems Components – gauges, pressure switches, hoses, couplers – is available in a variety of sizes, and is versatile enough for many applications. Specialized components such as accumulators and automatic coupler systems complete the full range of products. Each component is engineered to make your work easier and safer to perform.

  • Mechanical Actuators

  • Enerpac’s line of Uni-lift® mechanical actuators has set a new standard for linear motion control. Improving on the time-tested concept of converting rotary movement into linear motion, the Uni-Lift actuator series is ideal for a variety of challenging screw jack applications such as satellite dish positioning, solar panel tracking as well as moving heavy equipment.

    • M-Series, Machine Screw Actuators

    • Capacity .25 - 250 tons
      Max. Travel 232 inches
      Max. Speed 129 in/min

    • B-Series, Ball Screw Actuators

    • Capacity 1 - 100 tons
      Max. Travel 230 inches
      Max. Speed 175 in/min

    • Accessories

    • A comprehensive range of accessories are available to tailor your UNI-LIFT® system to meet your project requirements.

  • Concrete Stressing Products

  • Enerpac features a versatile line of concrete pre-stressing & post-tensioning hydraulic pumps, jacks, and accessories; all from a single source. These comprehensive solutions combine the best of three recognized brands: Enerpac, TT Fijnmechanica and Precision SURE-LOCK®.

    • Tensioning Jacks

    • capacity: 20 - 1000 tons
      stroke: 6 - 20 in
      strand diameters: .375-.60 in
      max. pressure: 6,500-10,000 psi

    • Hydraulic Pumps

    • High efficiency, two-speed pumps makes fast work of most stressing applications
      Available in multiple voltage configurations
      Reservoirs feature level indication and steel construction for ease of operation and maximum durability

  • Rail Maintenance Equipment

  • Enerpac's rail maintenance equipment provides work site solutions for stressing, lifting and surfacing.

    • A-Series, Mechanical Track Jacks

    • Rated Capacity per Jack 15 tons
      Stroke 5.25 - 13 inch

    • RP-Series, Hydraulic Rail Pullers

    • Rated Pulling Capacity 120 tons
      Stroke 6.5 - 15.5 inches

    • TJ-Series, POW'R-CLAW Hydraulic Track Jacks

    • Rated Capacity per Jack 10 tons
      Stroke 5-9 inches

    • RP-Series, Hydraulic Rail Pullers

    • Rated Pulling / Pushing Capacity 70 / 35 tons
      Stroke 8.00 inches

    • PR-Series, POW'R-RISER Lifting Jack

    • Rated Lifting Capacity 60-200 tons
      Stroke 14-27 inches
      Max. Pressure 10,000 psi

    • 550-Series, Mechanical Rail Puller

    • Rated Capacity 30 tons

    • WJ-Series, Hydraulic Wheel Truck Jacks

    • Rated Capacity per Jack 60 tons
      Stroke 5.50 & 16.20 inches