Optronis
Videos
Loading the player ...
- Offer Profile
- Optronis develops, manufactures and distributes streak cameras and high-speed video cameras for scientific and industrial applications.
Our high-end cameras can be used to capture ultra-fast phenomena. Our primary goal: to provide our customers with innovative solutions for fast optical measurements.
Product Portfolio
Machine Vision
- HIGH-SPEED MACHINE VISION
Cameras provided by Optronis for applications in machine vision as well as research allow to capture and transfer images at very high frame rate. These high-speed machine vision cameras are offered in 3 series. Each CamPerform series uses a different interface for data transfer. CamPerform-Cyclone
- CamPerform-Cyclone series cameras are high-speed cameras for machine vision applications. The cameras us the fast CoaXPress 2.0 interface to transmit data at up to 12.5 Gb per second and per channel. Up to 4 channels can be combined to reach a bandwidth of 50 Gb per second. High Performance image sensors are integrated without compromising Speed. Real time image transfer at high-speed and high spatial resolution becomes possible with CamPerform-Cyclone series cameras.
- CXP-12 interface for 4x 12.5 Gb/s
- small housing
Cyclone-1HS-3500
- Cyclone-65-70 is a machine vision camera with very high frame rate of 71 frames/sec at full resolution. Additional increase of frame rate is possible by reducing image height. The image sensor GMAX3265 is operating in global shutter mode. It is available in monochrome and color version. High dynamic range and low noise are resulting from large pixel surface. Similar to all models of CamPerform-Cyclone series the CoaXPress interface version 2.0 with 4 channels at 12.5 Gb/s each is used.
The Cyclone-65-70 is well appropriate for applications where small intensity differences at high speed need to be detected.
PERFORMANCEResolution (H x V); Frames / second 9344x7000 71 4672x3500 141
SPECIFICATIONSComponent / feature Value Sensor Type GMAX3265 Resolution 9344x7000 Pixel
Cyclone-2-2000
- The high performance LU19HS sensor is integrated in the Cyclone-2-2000 camera. The sensor operates in global shutter mode and is available in a monochrome version as well as a color version. Signal processing in the Cyclone-2-2000 is optimized for low noise. At full HD Resolution of 2 MPixel this CamPerfrom-Cyclone series camera provides more than 2,000 Frames per second. At reduced image height, framerate can be increased well beyond this.
The flexibility of the Cyclone-2-2000 makes it the ideal camera for various applications but particularly for 2D/3D measurements.
PERFORMANCEResolution (H x V); Frames / second 1,920 x 1,080 2,166 fps 1,280 x 960 2,587 fps
SPECIFICATIONSComponent / feature Value Sensor Type LUX19HS, global shutter Resolution 1,920 pixel x 1,080 pixel
Cyclone-5-700
- With 5 MPixel resolution a frame rate of more the 700 fps is reached with the Cyclone-5-700 camera of the CamPerform-Cyclone series. Even higher Frame rates can be reached at reduced Image height. The high resolution LUX51 sensor is integrated. This high performance chip operates in global shutter mode. It is available in a monochorme version and a color version.
The high resolution makes the Cyclone-5-700 perfectly suited for demanding applications in 2D- and 3D- measurement.
PERFORMANCEResolution (H x V); Frames / second 2,560 x 1,920 705 fps 1,920 x 1,080 1,252 fps
SPECIFICATIONSComponent / feature Value Sensor Type LUX51, global shutter Resolution 2,560 pixel x 1,920 pixel
Cyclone-16-300
- Cyclone-16-300 provides high spatial resolution of 16 MPixel and allows to capture images at about 300 frames/sec. The mashine vision camera is part of Optronis’ CamPerform-Cyclone series and integrates the LUX160 sensor. This sensor is operating in gloabal shutter mode and provides low noise image data. A monochrome as well as color version is available. Frame rate can be increased by reducing height of image area.
The Cyclone-16-300 can be used for a broad range of applications but due to the low noise sensor, the camera is well suited for measurement applications.
PERFORMANCEResolution (H x V); Frames / second 4,672 x 3,416 284 2,304 x 1,720 564
SPECIFICATIONSComponent / feature Value Sensor Type LUX160, Global Shutter Resolution 4,672 pixel x 3,416 pixel
CamPerform-CP
- CamPerform-CP series offers a wide range of cameras for various machine vision applicatins. High-speed sensors are implemented in different housings. All camera models use CoaXPress interface to transmit image data at up to 6.25 Gbps and per channel.
- CXP-6 Interface 4x 6.25 Gbps
- different housings for individual applications
For easy camera evaluation TimeViewer software can be used. Application note AN-CamPerform-CP-TimeViewer provides valuable information. 
CP70-16-M/C-148
- The CP70-2-M/C-1000 camera of the CamPeform-CP series provides full HD resolution at more than 1000 fps. Large Pixels with 10 µm x 10 µm pitch result in high light sensitivity. Low noise designs ensures accurate data to simplify measurement tasks.
Reducing window size in vertical but also horizontal direction leads to higher Maximum Frame rate. The camera provides adjustments for gain and offset. A factory set lookup table (LUT) is implemented. The LUX19HS sensor is operated in global shutter mode and is availabel in monochrome and color version.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-2-M/C-1000
- The CP70-2-M/C-1000 camera of the CamPeform-CP series provides full HD resolution at more than 1000 fps. Large Pixels with 10 µm x 10 µm pitch result in high light sensitivity. Low noise designs ensures accurate data to simplify measurement tasks.
Reducing window size in vertical but also horizontal direction leads to higher Maximum Frame rate. The camera provides adjustments for gain and offset. A factory set lookup table (LUT) is implemented. The LUX19HS sensor is operated in global shutter mode and is availabel in monochrome and color version.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP90-25-M/C-72
- The CP90-25-M/C camera is optionally equipped with a 25 megapixel monochrome or colour On-Semi image sensor. An outstanding feature, in addition to the high image refresh rate in global shutter mode, is the large quantum well (compared to other sensors), allowing a high signal-to-noise ratio. This means that the image appears particularly contrast-rich. The A/D converter depth is optionally 8 bit or 10 bit. The CP90-25-M/C-72 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP90-25P-M/C-72
- The CP90-25P-M/C-72 camera from the CamPerform-CP series is equipped with a 25 megapixel Python monochrome or colour On-Semi image sensor. In addition to the high image rate in global shutter mode, its outstanding features are the low parasitic light sensitivity (PLS) – meaning the sensor’s immunity to light hitting the sensor outside the exposure period – and the low thermally conditioned dark current, resulting in an extremely homogeneous dark and bright image over the entire sensor surface. The A/D converter depth is optionally 8 bit or 10 bit. The CP90-25P-M/C-72 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-12-M/C-188
- The CP70-12-M/C-188 camera is equipped with a 12 megapixel CMV12000 monochrome or colour AMS image sensor (CMOSIS). In addition to the high image rate in global shutter mode, its outstanding features are the high image quality and the low thermally-conditioned dark current, resulting in an extremely homogeneous dark and bright image over the entire sensor surface. An expanded high dynamic range (HDR) can be set for large differences in brightness. The A/D converter depth is optionally 8 bit or 10 bit. The CP70-12-M/C-188 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
QQuality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-12-M/C-188
- The CP70-12-M/C-188 camera is equipped with a 12 megapixel CMV12000 monochrome or colour AMS image sensor (CMOSIS). In addition to the high image rate in global shutter mode, its outstanding features are the high image quality and the low thermally-conditioned dark current, resulting in an extremely homogeneous dark and bright image over the entire sensor surface. An expanded high dynamic range (HDR) can be set for large differences in brightness. The A/D converter depth is optionally 8 bit or 10 bit. The CP70-12-M/C-188 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP80-4-M/C-500
- The CP80-4-M/C-500 camera is equipped with a 4 megapixel AM41 monochrome or colour Alexima image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y orientation, which makes the sensor particularly well suited to light section tasks. The sensor image is homogeneous and has an extremely low pixel error count of less than 4 over the entire sensor surface. The A/D converter depth is 8 bit. The CP80-4-M/C-500 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP90-4-M/C-500
- The CP90-4-M/C-500 camera is equipped with a 4 megapixel AM41 monochrome or colour Alexima image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the linear speed increase in the Y orientation, which makes the sensor particularly well suited to light section tasks. The sensor image is homogeneous and has an extremely low defect pixel count of lessn than 4 over the entire sensor surface. The A/D converter depth is 8 bit. The CP90-4-M/C-500 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP80-3-M/C-540
- The CP80-3-M/C-540 camera is equipped with a 3 megapixel LUPA3000 monochrome or colour On-Semi image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the speed increase in the X and Y orientation, which makes the sensor particularly well suited for high speeds above 10,000 images per second. The sensor image is homogeneous and has an extremely low defect pixel rate. The A/D converter depth is 8 bit. The CP80-3-M/C-540 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP90-3-M/C-540
- The CP80-3-M/C-540 camera is equipped with a 3 megapixel LUPA3000 monochrome or colour On-Semi image sensor. Its outstanding feature, in addition to the high image rate in global shutter mode, is the speed increase in the X and Y orientation, which makes the sensor particularly well suited for high speeds above 10,000 images per second. The sensor image is homogeneous and has an extremely low defect pixel rate. The A/D converter depth is 8 bit. The CP80-3-M/C-540 camera of the CamPerform-CP series is specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-HD-M/C-900
- The CP70-HD-M/C-900 camera of the CamPerform-CP series is equipped with an AMS image sensor (CMOSIS). The sensor offers a winning combination of an extremely high image refresh rate and Full HD resolution in global shutter mode. The CP70-HD-M/C-900 camera is particularly suited to industrial applications involving streaming. The A/D converter depth is 8 bit. The CP70-HD-M/C-900 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-1-M/C-1000
- The CP70-1-M/C-1000 camera of the CamPerform-CP series is equipped with a 1.3 megapixel large latest-generation LUX1310 sensor from Luxima. The sensor impresses with a homogeneous overall image, 12 bit AD conversion at maximum performance and its initial, already low non-linearity. This means that accurate 2D high-speed measuring tasks can be performed at speeds of well above 10,000 images per second. The CP70-1-M/C-1000 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-1HS-M/C-1900
- The CP70-1HS-M/C-1900 camera is equipped with a 1.1 megapixel large latest-generation LUX13HS sensor from Alexima. The sensor impresses with its large pixel coverage and high frame rate, which allow accurate 2D/3D high-speed measuring tasks to be performed at speeds of well above 10,000 images per second. The CP70-1HS-M/C-1900 cameras are part of CamPerform-CP series. They are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-004-M/C-19000
- The CP70-004-M/C-19000 camera is equipped with a latest-generation LUX1310 sensor from Luxima and part of Optronis’ CamPerform-CP series. The camera is optimised for high frame rates. The sensor impresses with a homogeneous overall image, 12 bit AD conversion at maximum performance and its initial, already low non-linearity. This means that accurate 2D high-speed measuring tasks can be performed at speeds of well above 30,000 images per second. The CP70-004-M/C-19000 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CP70-004-M/C-19000
- The CP70-004-M/C-19000 camera is equipped with a latest-generation LUX1310 sensor from Luxima and part of Optronis’ CamPerform-CP series. The camera is optimised for high frame rates. The sensor impresses with a homogeneous overall image, 12 bit AD conversion at maximum performance and its initial, already low non-linearity. This means that accurate 2D high-speed measuring tasks can be performed at speeds of well above 30,000 images per second. The CP70-004-M/C-19000 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Maximum standardization
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform series, Optronis offers high-speed cameras that utilize the latest technology yet remain affordable. The basic principle in developing the CamPerform series was to put consistent emphasis on using standards:- GenICam Compatible interface for easy programming
- EMVA 1288 Simple comparability via tested, characteristic camera features
- Shockproof Robust and fit for industry uses thanks to tested shock and vibration performance to DIN EN 60721-3-2
- CoaXPress High-performance data transfer using DIN 1.0/2.3 connections
CamPerform-CL
- Machine vision systems using the well established CameraLink interface are served with these cameras.
- CameraLink interface (base-medium-full)
- very small housing
CL600x2 M/C
- The CL600x2 M/C camera is equipped with a 1.3 megapixel large LUPA1300 sensor from On-Semi. The camera of the CamPerform-CL series is suitable for fast measuring tasks in 2D or 3D. The camera offers many winning features which enable the camera to be used flexibly on different measuring tasks. One special feature is the increased image rate in the X and Y sensor orientation. The CL600x2 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform CL series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the C-mount format to the ROI (Region of Interest) of the image sensor. C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ease of use
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform CL series, Optronis offers high-speed cameras with CameraLink connection which are easy to operate and deliver great performance.- EMVA 1288 Simple comparability via tested, characteristic camera features
- CameraLink CameraLink MDR-26 connectors for Base (CL300x2) and Full (CL600x2) CameraLink configuration
- Start-up and Factory mode Up to 8 user-specific and 10 pre-set operating modes available
- Look-Up Table 10 bit to 8 bit look-up table
- Edge and Level trigger modes Triggering on a rising/falling edge or input level
- XY speed increase Increasing the image rate by reducing the image format in the X and Y orientation
- Very high light sensitivity Up to 12,000 ISO/ASA (SNR noise 10, gain 1) high light sensitivity
CL300x2 M/C
- The CL300x2/MC camera of the CamPerform-CL series is equipped with a 1.3 megapixel large LUPA1300 sensor from On-Semi. The camera is suitable for fast measuring tasks in 2D or 3D. The camera offers many winning features which enable the camera to be used flexibly on different measuring tasks. One special feature is the increased image rate in the X and Y orientation of the sensor. The CL300x2 cameras are specified to EMVA1288 and tested for consistent image quality.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform CL series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the C-mount format to the ROI (Region of Interest) of the image sensor. C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount/FMG-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- M42x1 Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ease of use
Quality, comparability and transparency are key factors in the purchase and use of image processing components. In the CamPerform CL series, Optronis offers high-speed cameras with CameraLink connection which are easy to operate and deliver great performance.- EMVA 1288 Simple comparability via tested, characteristic camera features
- CameraLink CameraLink MDR-26 connectors for Base (CL300x2) and Full (CL600x2) CameraLink configuration
- Start-up and Factory mode Up to 8 user-specific and 10 pre-set operating modes available
- Look-Up Table 10 bit to 8 bit look-up table
- Edge and Level trigger modes Triggering on a rising/falling edge or input level
- XY speed increase Increasing the image rate by reducing the image format in the X and Y orientation
- Very high light sensitivity Up to 12,000 ISO/ASA (SNR noise 10, gain 1) high light sensitivity
Slow Motion
- CAMRECORD – HIGH PERFORMANCE IN ALL ENVIRONMENTS
Whether it’s needed in the laboratory, at external sites or for crash tests, you can expect high performance every time, every place and everywhere from Optronis’ slow motion cameras of CamRecord-CR and CamRecord-Sprinter series. The systems are particularly easy to operate. The high level of light sensitivity of these cameras gives you a clear view of your subject, even in poor light conditions. The CamRecord-CR and CamRecord-Sprinter series have a range of cameras with different resolutions and frame rates. You can also freely configure the resolution and frame rate for the required performance. Standard F-, G- and C-mount lenses can be used, and each system is supplied with the TimeViewer analysis software.
FUNCTIONAL DESIGN- Standard lens mount (F-/ G- /C-mount)
- Sturdy camera housing
TIME VIEWER – ANALYSIS SOFTWARE
TimeViewer is professional analysis software which is intuitive and extremely easy to operate. You can use it to for recording and analysis, protocol sequences and project management. TimeViewer integrates a object tracking function to autmatically extrace trajectories.
TIMEVIEWER FEATURES AT A GLANCE:- Image trigger for automatic recording startup
- Logo and text overlaid into the sequences
- Fully adjustable pre- and post-triggers
- Export of AVI formats
- Preview images for simplified navigation
- Synchronous multi-camera control
- Object tracking
- CAMRECORD – HIGH PERFORMANCE IN ALL ENVIRONMENTS
Sprinter-FHD
- The Sprinter-FHD high-speed camera is equipped with a large-format, light-sensitive image sensor that records the fastest movements. With a high image refresh rate of more than 1,800 images per second in full HD Format, the camera is suitable for making very fast object movements visible, right through to simple ballistics. This CamRecord series camera therefore solves highly demanding measurement tasks in fault analysis and quality assurance for particularly fast-moving objects.
Standard-lens-attachments
The Sprinter-FHD camera is user friendly and designed to be used for various applications. What makes these cameras user-friendly is a number of standard interfaces but particularly the availabilitly of standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the object size to the sensor size. C-Mount lenses are low priced and due to their wide aperture particularly suitable for applications with high image refresh rates (frames per second).
- F-Mount Allows using widespread Nikon-F lenses with mechanically adjustable aperture ring. Many fixed Focus models are available but also various zoom models.
- FMG-Mount For standard applications with Nikon G-mount lenses. The aperture is adjusted using the ring located on the mount.
- M42-Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ring Memory
The 16 GB Memory of the Sprinter-FHD is operated as a ring memory. After starting recording, the camera stores the image sequence continuously. After triggering, recording continues for a set time. This allows some response time for the exernal trigger detection sytsem.
Using the 16 GB memory, it can store the recording over a period of 4 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process.
Interfaces
There are several connections on the aluminium camera housing:- Mechanical interface Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
- Fast GigE interface Allows high download speeds from the image memory to the connected PC
- External trigger and synchronization interface Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
- SSD Slot Plugin for a SSD harddisk
Sprinter-HD
- The Sprinter-HD high-speed camera of the CamRecord-Sprinter series is equipped with a large-format, highly light-sensitive image sensor that records the fastest movements. Capturing at a rate of 3,500 images per second in full format and 12,000 images at a resolution of 1,280 x 240 pixels, the camera is suitable for making very fast object movements visible, right through to simple ballistics. This camera therefore solves demanding measurement tasks in fault analysis and quality assurance for particularly fast-moving objects. The Sprinter-HD is identical to the formally availabe CR-S3500 model.
Standard-lens-attachments
The Sprinter-HD camera is ideally suited for industrial applications. What makes these cameras user-friendly is a number of standard interfaces but particularly the availabilitly of standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the object size to the sensor size. C-Mount lenses are low priced and due to their wide aperture particularly suitable for applications with high image refresh rates (frames per second).
- F-Mount (Nikon) Allows using widespread Nikon-F lenses with mechanically adjustable aperture ring. Many fixed Focus models are available but also various zoom models.
- FMG-Mount For standard applications with Nikon G-mount lenses. The aperture is adjusted using the ring located on the mount.
- M42-Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ring memory
The Sprinter-HD is equipped with an 16 GB ring memory. After starting recording, the camera stores the image sequence continuously. After triggering, recording continues for a set time. This allows some response time for the exernal trigger detection sytsem.
Using the 16 GB memory, it can store the recording over a period of 4 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process.
Interfaces
There are several connections on the aluminium camera housing:- Mechanical interface Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
- Fast GigE interface High download speeds from the image memory to the memory of the connected PC
- External trigger and synchronization interface Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
- SSD Slot Plugin for a SSD harddisk
CR3000x2
- The CR3000x2 of Optronis’ CamRecord series has a large-format, light-sensitive image sensor (up to 5000 ISO/ASA). The sensor resolution is 3 megapixels, which means that up to 3 times greater image detail can be displayed simultaneously by comparison with the CR600x2. The image refresh rate can be configured and increased by reducing the resolution to suit in the X and Y orientation. Typical applications are in the range from 50 to 20,000 images per second. Housing is free from ventilation slots.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- EFS-Mount Canon mount with electronically adjustable aperture and focus
- FMG-Mount For standard applications with lenses available in the photo trade with Nikon G-mount lens connectors. The aperture is adjusted using the ring located on the mount.
- M42-Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ring memory
The CR3000x2 is equipped with an 8 GB or 16 GB ring memory, depending on requirements. This doesn’t just fulfil a purely data storage function. The CamRecord is operated via a trigger; in other words, via a shutter release. After you have starting recording, the CamRecord stores the relevant image sequence even before you activate the trigger. The recording then continues for a set time, as ultimately you’re working with particularly fast processes. The sequence is backed up in the ring buffer, and that’s how the CamRecord takes account of response times entirely automatically.
Using the 16 GB memory, it can store the recording over a period of 11 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process. Other models in this performance category are often only offered with a 4 GB or 8 GB memory. With 8 GB, the recording time is around 5 seconds.
Working anywhere
Whether it’s needed in the laboratory, at external sites or for crash tests, you can expect high performance every time, every place and everywhere from Optronis’ CamRecord. In fact, with its sturdy housing and no ventilation slots, it is best equipped for such conditions. That’s why your CamRecord is particularly well suited for use outside. Fixtures for attaching a tripod to various sides of the housing make these high-speed cameras even more versatile.
The CR3000x2 offers exceptionally high light sensitivity. Using ISO12232, up to 5,000 ISA/ASA (gain 1, Snoise 10). This means that you have a clear view of your subject even in poor light conditions.
Interfaces
There are several connections on the robust aluminium camera housing:- Mechanical interface Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)
- Fast GigE interface High download speeds from the image memory to the memory of the connected PC
- HDMI video output Recording situation monitoring during recording
- Ring memory with data trigger VGA video output
- Trigger for image changes External trigger and synchronization interface Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
CR600x2
- The CR600x2 is the Optronis slow-motion camera of CamRecrod series with the highest light sensitivity, at up to 12,000 ISO/ASA. Fast movements are reliably recorded with exposure times of as little as one (1) microsecond (1 millionth of a second). The camera takes 500 images per second at full resolution (1,280 x 1,024 pixels), although the resolution can be freely configured in the X and Y orientation. Lowering the resolution increases the image refresh rate or, if the image refresh rate is kept the same, extends the recording period. Typical applications are in the range from 50 to 10,000 images per second. The camera housing is free from ventilation slots.
Works with standard lenses
Designed with a sturdy camera housing and no ventilation slots, the CamPerform series is ideally suited for industrial applications. What makes these cameras particularly user-friendly is the possibility of using standard lens attachments.- C-Mount For microscopy applications or for optimal adjustment of the image sensor to the ROI (Region of Interest). C-Mount lenses are particularly suitable for applications with high image refresh rates (frames per second) with a simultaneously wide aperture.
- F-Mount With adjustable or mechanically adjustable aperture ring, Nikon-F lenses can be adjusted very easily to the object to be recorded.
- EFS-Mount Canon mount with electronically adjustable aperture and focus
- FMG-Mount For standard applications with lenses available in the photo trade with Nikon G-mount lens connectors. The aperture is adjusted using the ring located on the mount.
- M42-Mount Industrial lenses with the choice of x1 or x0.75 (T2) thread pitch.
Ring memory
The CR600x2 is equipped with an 8 GB or 16 GB ring memory, depending on requirements. This doesn’t just fulfil a purely data storage function. The CamRecord is operated via a trigger; in other words, via a shutter release. After you have starting recording, the CamRecord stores the relevant image sequence even before you activate the trigger. The recording then continues for a set time, as ultimately you’re working with particularly fast processes. The sequence is backed up in the ring buffer, and that’s how the CamRecord takes account of response times entirely automatically.
Using the 16 GB memory, it can store the recording over a period of 26 seconds, at full resolution and speed. This option for checking more extended process flows is of particular benefit if it is difficult to assess the particular point at which a fault arises in the process. With 8 GB, the recording time is around 13 seconds.
Working anywhere
Whether it is needed in the laboratory, at external sites or for crash tests, you can expect high performance every time, every place and everywhere from Optronis’ CamRecord. In fact, with its sturdy housing and no ventilation slots, it is best equipped for such conditions. That’s why your CamRecord is particularly well suited for use outside. Fixtures for attaching a tripod to various sides of the housing make these high-speed cameras even more versatile. The large-format image sensor on the CR600x2, with 14 µm pixels, guarantees very high light sensitivity.
Interfaces
There are several connections on the robust aluminium camera housing:- Mechanical interface Sturdy stainless steel camera mount with either 4 x M4 screws or photographic thread (¼-20 UNC)Fast GigE interface
- High download speeds from the image memory to the memory of the connected PC HDMI video output
- Recording situation monitoring during recordinRing memory with data trigger Trigger for image changes
- External trigger and synchronization interface Connection for various trigger sources (e.g. mechanical switch) and synchronization to motion-dependent image refresh rates
Streak-Camera
- STREAK SYSTEMS – OPTOSCOPE
Streak camera technology was developed for measuring ultra-fast optical phenomena. OptoScope streak cameras provide temporal resolution down to the Picosecond regime. Additionally, OptoScope systems have high sensitivity allowing single photon detection. Streak cameras are the only instruments that can capture the behavior over time of multiple optical signals. Combined with a spectrometer this allows their application in the field of time resolved spectroscopy. 
OptoScope SC-10 Systems
- SC-10 systems are based on the SC-10 main unit. These systems provide a high degree of flexibility and cover a large range of applications. High temporal resolution of 2 ps can be obtained. The main unit integrates a streak tube with quartz input window to allow light detection from UV to NIR. Sweep units for triggered operation as well as synchroscan operation are available. Furthermore, it is possible to add a second sweep unit with orthogonal deflection.
SC-10 systems are well suited for time resolved spectroscopy as they are flexible and they provide a wide range for optical coupling. For applications in detonics and plasma physics the 2-dimensional active area can be used to image the target area and consequently to simplify alignment.
OptoScope SC-20 Systems
- SC-20 streak camera systems have a particularly large detection area of 35 mm x 4 mm as well as a large useful screen with 40 mm diagonal. Optical signals are focused onto the fiber optical input window without requirement of demagnification. A version with UV fiber optic input window is proposed. The slit mask is used in direct contact with the input window. The mask can be exchanged. Alternatively to a fixed slit, the input optics can be completed with an adjustable slit and coupling optics as well as object lens mount and shutter. The SC-20 systems provide sub-Nanosecond temporal resolution for applications in the field of detonics and plasma physics research.
Fig.: SC-20 with IOS-20, TSU12-20 and Control Pad
OEM-Solutions
- ONLY THE BEST COMES FROM TEAMWORK
A top athlete is capable of producing extraordinary performances. Their capabilities come from years of training and daily practice. You can make use of the professionals in high-speed technology and image-processing solutions so that you too can profit from an array of peak performances.
Optronis develops and markets cameras that stand out for their exceptional performance. Machine vision cameras are equipped with fast CMOS image sensors, and notably with the CoaXPress interface. They offer up to 25 gigabits/second transfer speed on 4 CoaX channels. Future standards even go up to 50 gigabits/second. It opens up applications that offer performance up to 100 times better than when using conventional CCD cameras. These “Standard Machine Vision Cameras” from Optronis already have many basic functionalities and standards needed in various machine vision applications.
If you want to solve your image processing tasks using Optronis cameras, and possibly your own image processing algorithms on a system platform, we can offer you a range of services:
CUSTOMIZED ADJUSTMENT
Starting from the standard Optronis camera platforms, the cameras can be customized for the individual customer (Machine Vision / Slow Motion / Streak). In most cases, the requirements can be solved using existing modules. This realizes innovative camera solutions for our customers that offer an additional technological advantage.
IMAGE PROCESSING
Your image processing task, and achieving it cost-efficiently, is what spurs us on. If you want to scale the performance of your existing image processing solution using higher-performance cameras or introduce a new image processing solution, then Optronis offers you the right development environment. By using the plug-in enabled EyeMotion image processing software connected to e.g. Adaptive Vision, Matlab or C++ codes, you can test your image processing algorithms together with Optronis cameras and prepare or validate this for use in the field.