Level limit detection
- Suitable for most bulk goods
- Simple & reliable measurement principle, maintenance free
- Insensitive to dust, electrical charge, adhesion, temperature and pressure
- Suitable for Hazardous Locations (dust explosion)
- Small and compact design, requires little space
- Swivelling housing for simple installation
- Robust die-cast aluminium housing
- Enclosure IP 66
- Variety of supply voltages and process connections available
- Approvals: ATEX/IEC Ex/GOST Ex/RTN Ex und EHEDG

WORLD PREMIERE- universal voltage electronic, without jumper and with integrated heating

Level limit detection
- Favourably priced model with plastic housing, designed for use in bulk materials with lower mechanical load
- Reliable and simple functionality, maintenance free
- Small and compact design, requires little space
- Rotatable plastic housing for easy installation
- Insensitive to dust, electrical charge and adhesion
- Suitable in hazardous locations (dust explosion)
- Approvals:ATEX / IEC Ex/GOST Ex und RTN Ex

WORLD PREMIERE- universal voltage electronic, without jumper and with integrated heating

Level limit detection
- Suitable for most bulk goods
- Simple and reliable measurement principle, maintenance free
- Insensitive to dust, electrical charge, adhesion, temperature and pressure
- Large housing for easy wiring
- Robust die-cast aluminium housing
- Standard and flame-proof version
- Certificates for hazardous locations (gas and dust), ATEX, FM and CSA
- Approvals: ATEX/IEC Ex/GOST Ex/RTN Ex und EHEDG

WORLD PREMIERE- universal voltage electronic, without jumper and with integrated heating

Level limit measurement
- Especially suited for applications in fine grained and powdery bulk goods
- Simple and reliable function principle, maintenance free
- For difficult applications with high mechanical loading
- Short insertion length allows installation in very limited spaces, e.g. down pipes
- Favourable design to avoid build up between the forks
- Detection of solids in liquids
- Robust die-cast aluminium housing
- Enclosure IP 66
- Certified for hazardous locations (gas and dust)

Level limit measurement
- Especially suited for applications in fine grained and powdery bulk goods
- Simple and reliable function principle, maintenance free
- Detects lightest bulk materials from 5g/l
- Compact design for installation in limited spaces
- Robust die-cast aluminium housing
- Enclosure IP 66
- Oscillators made of stainless steel
- Certified for hazardous locations (gas and dust)
- NAMUR electronic available

Level limit detection
- Especially suited for applications in fine grained and powdery bulk goods that do not tend to form heavy deposits
- Excellent price-performance ratio
- Simple and reliable function principle, maintenance-free
- Compact design for mounting in limited spaces
- Enclosure IP 66
- Die-cast aluminium housing
- Osciallator made of stainless steel
- Certified for hazardous locations (dust explosion)
- Approvals:ATEX / IEC Ex/GOST Ex und RTN Ex

Level limit measurement
- Wide range of applications
- For difficult applications with high mechanical loading
- Simple and reliable function principle, absolutely maintenance free
- Short insertion length allows installation in very limited spaces, e.g. down pipes
- Favourable design to avoid build up between the probes
- Certified for use in hazardous locations (gas and dust), ATEX, FM, CSA
- Standard and flame-proof version available
- Approvals: ATEX/IEC Ex/GOST Ex/RTN Ex und EHEDG

Level limit measurement
- Suitable for most bulk goods
- Simple and reliable function principle, absolutely maintenance free
- Detects very light bulk materials from 5g/l
- Large housing for easy mounting
- Robust die-cast aluminium housing, twistable for simple installation
- Certified for hazardous locations (gas and dust), ATEX, FM and CSA
- Standard and flame-proof version available
- NAMUR electronic available
- Approvals: ATEX/IEC Ex/GOST Ex/RTN Ex und EHEDG

Level limit measurement
- Reliable operation in pneumatically conveyed silicic acids
- Level control in vertical shafts and pipes
- Developed for full detection in balance tanks
- Full, demand or empty detection
- High sensitivity, suitable for bulk goods even lighter than 5g/l, adjustable in 2 steps
- Quick reaction time

Full, demand and empty detector 1-probe & 2-probe level limit detection
- Level monitoring of electrical conductive liquids and sludges in metal containers
- Large range of applications in the building industry; also for the chemical industry and for environmental technology
- Mechanically robust design
- Standard to every unit is a delayed signal output to ensure accurate measurement in rippling lidquids
- The use of alternating current in the measuring circuit prevents corrosion of the probe rod and electrochemical reactions of the bulk liquid
- Adjustable sensitivity

- Discontinuous level measurement for nearly all kinds of bulk goods and interface measurement
- Simple and reliable measuring principle
- Sensor weights in various designs suitable for every application
- Insensitive to dust, dielectricity, conductivity, humidity, caking
- Easy installation, maintenance-free operation
- Very precise results covering large measuring ranges
- Suitable in hazardous locations (dust explosion)
- Detection of solids in liquids
- Suitable for interface applications
- Increased durability via brushless motor also with high measuring frequency
- Large measurement distances and long intervals between services thanks to new rope system
- Complementary Remote box NB9000 allows remote programming and analysis for up to 10 units
- A multitude of different process connections and accreditations ensure that Nivobob is suitable for the international market

- Sensational cost/performance ratio
- Regardless of material properties such as conductivity, dust, di-electricity
- Easy installation - also for direct mounting on an inclined silo roof
- Easy installation, maintenance-free operation for many years
- Simple and reliable measuring principle Suitable in hazardous locations (dust explosion)
- Multilanguage software menu [german, english, french, russian, italian]

Nivobob®4000 is used in dry and unproblematic bulk goods. It is particulary suitable for the building, animal feed and grain industry.

Measuring distance of up to 70m with metal band

Microprocessor controlled measuring process, intelligent monitoring

Integrated tape cleaner

- Discontinuous level measurement for nearly all kinds of bulk goods and liquids
- Simple and reliable measuring principle
- Designed for high mechanical loads
- Insensitive to dust, dielectricity, conductivity, humidity, caking
- Easy installation, maintenance-free operation
- Very precise results covering large measuring ranges of up to 70 metres

Sensor, transducer and controller unit

- Integral unit with compact design
- Easy installation and commissioning
- Programming via integrated keypad or Nivowave PC-Software
- NW 5000 series optimised for measurement in solids
- NW 5000L series optimised for measurement in liquids

Transducer and controller unit

- Very attractive cost/performance ratio
- Easy programming via Nivowave PC-Software
- Compact unit without display and keypad
- NW 4000 series optimised for solids
- NW 4000L series with 2" thread for basic measurements and short distances
- Approvals: ATEX

Transducer – NW 1000
Sensor for use with controller NW 2000 series
- Easy installation and wiring
- For process temperatures up to 150°C
- Optimised for applications in solids and challenging measurements in liquids

Level Controller – NW 2000
Controller and evaluation unit for transducer NW 1000 series
- Clearly arranged display
- Easy programming via integrated keypad or Nivowave PC-Software
- 5 freely programmable Relays
- Relays state indication via LED
- 500m (1650ft) distance to transducer possible
- Approvals: ATEX

GPRS/ EDGE Modem – NW 9100

- Remote configuration of all parameters
- Remote support for the whole application
- To be combined with one of our Service packages

Remote control of all parameters and visualisation of the complete measurement network

Level limit measurement Volumetric dosing controller

Mode of operation
 Flexinivo FN6 combines the qualities of a vibration sensor from the Vibranivo series with the ability to detect varying filling levels. Measurement evaluation and control of the height adjustable unit is via a programmable logic controller.

Features
- Simple to use Reliable operation, not affected by awkward bulk materials, e.g. dusty, strong conductivity, dieelectricity, and so on
- Measuring range up to 4.4 Metres
- User-defined measuring points via flexible height adjustment

Height adjustable unit for level limit measurement of variable levels in volumetric dosing systems.

Mode of operation
Either a Vibranivo or Rotonivo sensor is attached to a motorised adjustable sliding unit. A very precise potentiometer provides an output signal of the position of the sliding unit. For analysis of the output, we can provide you with a custom made control unit.

Features
- Mechanically robust design made from stainless steel
- Sliding unit with ball bearing and belt drive
- Low maintenance operation

• Comprehensive visualization software for displaying silo and vessel fill levels on a 5.7“ touch panel, including trend display
• Display in volume, percentage, height or weight
• Signal evaluation of 4-20 mA analogue, digital input as well as the UWT Nivowave® Acoustic Wave sensor Modbus RTU.
• Touch panel is available as a fixture or complete with control cabinet

 

• Display of the silo fill level on LED digital displays
• Fill monitoring via alarm signal and shut off valve control
• Signal evaluation of 4-20 mA analogue and digital input
• Easy to use fill monitoring via Lorry module
• Complete system with project specific electrical plans

 

• Fill level visualization via web server module
• Password protected access on standard internet browser software via Ethernet
• Data storage and download, trend data via software
• Worldwide access via remote enquiry
• Fill monitoring via alarm signal and shut off valve control
• Signal evaluation of 4-20 mA analogue, digital input as well as the UWT Nivowave® Acoustic Wave sensor Modbus RTU.
• Easy to use fill monitoring via Lorry module
• Complete system with project specific electrical plans

 

• We assemble all components and systems professionally and quickly
• Our experts set up your individual installation right from the start promptly and precisely
• We only use premium materials for our professional wiring services (such as UV-resistance cables for outside use)
• We eliminate your risk in advance and prevent follow-up problems

• We assemble all components and systems
• You can rely on our specialists to help save you precious time
• Our service technicians leave nothing to chance during the set up.
• You can trust our service team to provide a smooth installation and setup, thus saving you valuable time
• Our measurement technology can be parameterized and readjusted via remote diagnostics
• We provide a guarantee for flawless operation and are happy to look after your installation after the initial setup.

• We prepare your sensor and Nivotec systems operators for their work
• Special training provides your staff a maximum level of preparation
• You can trust our service team to provide a smooth installation and setup, thus saving you valuable time
• Our measurement technology can be parameterized and readjusted via remote diagnostics
• We provide a guarantee for flawless operation and are happy to look after your installation after the initial setup.