• Offer Profile
  • Filter presses made in Germany

    Filtration is multifaceted and requires individual solutions. Filox Filtertechnik therefore exclusively produces custom-made products and develops them in its in-house ideas and production workshop. Competent engineers and designers work out demand-specific products that perfectly fit the customer. From the idea to the production, this is done in Germany - because Made in Germany is still the best guarantee for a long product life.

Product Portfolio
  • Filter presses

  • Our products offer you a wide range of possibilities

    • Manual or electro-hydraulic closing/opening of filter presses
    • Fully automatic plate transport with accident prevention system
    • Drip plate made of PP, steel, stainless steel; manually operated or hydraulically driven
    • Cake washing, pressure and washing plates
    • Latest generation PLC control with remote maintenance module
    • Filter cloth acidizing
    • Fully automatic filter cloth cleaning
    • Cake release system
    • Drip-tight filter plate packs
    • Two-sided filling
    • Ex-protection versions

    Chamber filter presses

    By generating pressure from the feed pump, the suspension is conveyed into the filter chambers.

    Membrane filter presses

    Here, the suspension is conveyed into the filter chambers only with limited pressure. Final dewatering is achieved by pressurizing the membranes.

    Frame filter presses

    Here the same process is used as in the chamber filter press. The filter chambers are formed by the frame plates used.

    Versions

    • Filter plate sizes from 250 x 250 mm to 2,000 x 2,000 mm
    • Side-bar filter presses in small, medium and large formats
    • Overhead filter presses as chamber and membrane filter presses from a size of 800 x 800 mm
    • Mobile filter presses
    • Filtration pressure up to 30 bar (high pressure filter presses)
    • Operation: manual, semi-automatic and fully automatic
    • Contents: 5 to 19,500 dm3
      • Manual chamber filter press 250 - 630

      • The manual chamber filter press is closed by means of a single-acting hydraulic cylinder. Opening is done by spring return.

        All necessary modifications of our filter presses are taken into account during planning. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements

        Hydraulic closing by means of a two-stage manual piston pump.

        The drip plate can be used either as a manual sliding plate orin a swiveling design with a hand lever.

        Our manual chamber filter presses are ideally suited for sludge dewatering in small industrial wastewater treatment plants as well as for laboratories.

        Additional products:

        • Discharge hoppers
        • Screw / twin screw conveyors
        • Service platforms / service platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying
      • Semi-automatic chamber filter press 470 - 630

      • The semi-automatic chamber filter press is closed by means of a motor hydraulic system. Opening takes place via spring return.

        All necessary modifications of our filter presses are taken into account during planning. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements.

        Hydraulic closure by means of a two-stage hand piston pump.

        The drip plate can be used as a manual sliding plate or in a swiveling design with a hand lever.

        Our manual chamber filter presses are ideally suited for sludge dewatering in small industrial wastewater treatment plants as well as for laboratories.

        Additional products:

        • Discharge hoppers
        • Screw / twin screw conveyors
        • Service platforms / service platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying
      • Chamber filter press with vibrator 470 - 800

      • Our chamber filter press in Vmatic design. Due to a longer hydraulic cylinder stroke and multiple routing, the filter chambers are opened and emptied in one go. An additional vibrating device supports the discharge of the filter cake.

        All necessary modifications of our filter presses are taken into account during the planning stage. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements

        Due to the multiple installation of the filter plates, the individual filter chambers are opened in one go. This process saves a lot of time when emptying the filter press.

        The vibrating device is an optimal aid to loosen the filter cake when emptying the filter plates

        Additional products:

        • Discharge hopper
        • Screw / twin screw conveyors
        • Service platforms / service platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying
      • Automatic chamber filter press 630 - 1000

      • Our automatic filter press is equipped with hydraulic plate transport and drip plate, which is operated by PLC control. The filter press is closed and opened by a double-acting hydraulic cylinder.

        All necessary modifications of our filter presses are taken into account during the planning stage. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements.

        The automatic plate transport is hydraulically driven and controlled by a pressure sensor. The low-maintenance plate transport carriages are guided on lateral stainless steel profiles.

        The light barrier or protective grid is installed on our filter presses in accordance with the applicable safety guidelines.

        The automatic drip plate can be driven hydraulically or pneumatically. Execution as swivel / or scissor device.

        Our automatic filter press is operated via a PLC control system. The visualization is done via a key screen or via a touch panel.

        Additional products:

        • Discharge hopper
        • Screw / twin screw conveyors
        • Service platforms / service platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying
      • Chamber filter press Membrane technology and Additional functions 1200 - 2000

      • In addition to membrane technology, our chamber filter presses can be equipped with further additional functions. Automatic washing devices, cloth loosening devices as well as cloth acidification can be integrated into a chamber filter press as required.

        All necessary modifications of our filter presses are taken into account during the planning stage. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements

        In membrane technology, a second filtration process takes place. With the help of a re-pressing station, the membranes are stretched by the re-pressing medium, whereby the filter cake is pressed again.

        This results in a lower residual moisture content. Depending on the application, the filter plate package consists only of membrane plates or alternately of chamber plate & membrane plate as a mix package.

        The automatic filter cloth washing device is used to clean the filter cloths in order to ensure an optimum throughput for a longer period of time. The filter cloths are sprayed with max. 100 bar through a nozzle bar.

        A cloth spreading device supports and facilitates the cake release from the filter cloth. This function is very suitable for adhesive filter cakes.

        Additional products:

        • Discharge hopper
        • Screw / twin screw conveyors
        • Serving platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying
      • Overhead presses 1000 - 2000

      • FILOX® overhead presses from size 1000-2000 mm can be used for high volumes of wastewater from municipal and industrial wastewater treatment plants, in addition to applications in the chemical and food industries.

        All necessary modifications of our filter presses are taken into account during the planning stage. So that it becomes your press!

        FILOX® - individual solutions tailored to your requirements

        Support
        The sliding suspension of the filter plates is maintenance- and pendulum-free. Locking of the individuals is not necessary, as static friction prevents unintentional opening of the plates.

        Wash register
        Optional wash register / filter cloth spreading device

        After prolonged use of the filter cloths, they must be cleaned so that the original throughput can be achieved again. With the help of the automatic washing device, this work is done without any operating effort. The maximum water pressure is 100 bar.

        Additional products:

        • Discharge hopper
        • Screw / twin screw conveyors
        • service platforms / service platforms
        • Tipping bins and roll containers for cake discharge
        • Feeding pumps
        • Special designs in container systems
        • Mobile chamber filter presses
        • Heating plate for filter cake drying