Newly developed grades for longer and stable tool life in machining of various cast irons - from grey cast iron (FC) to high-strength ductile cast iron (FCD).
Our new PVD coated grades named AC5015S and AC5025S achieve excellent crater and notch wear resistance thanks to tough substrate combined with new adhesion technology.
AC6000M Series offer grades for stainless steel cutting with excellent wear and fracture resistance.
Besides our general purpose grade AC8025P, the AC8000P Series have been expanded with two new grades named AC8015P for high speed cutting and AC8035P for heavy interrupted cutting.
T1500A is a general purpose uncoated cermet that provides stable finish quality in finishing and medium cutting. This cermet grade features varying levels of granularity that leaves a beautiful glossy finish while achieving excellent resistance against wear and fracture.
T1000A is an uncoated high speed finishing grade designed with wear resistance in mind that provides long tool life and excellent wear resistance in continuous finishing and profiling applications.
PVD coating process "Brilliant Coat" for glossy finished surface with excellent adhesion resistance. A general purpose coated cermet grade capable of maintaining high-quality finished surfaces while providing excellent wear resistance.
The MultiDrill MDF Type can be used for various purposes including high-efficiency spot facing and drilling in inclined and curved surfaces thanks to its point angle of 180°.
MLDH micro long drills are oil-hole drills for high efficiency drilling that were developed for drilling deep, small-diameter holes. These next-generation, small-diameter hole drills feature improved strength which is often a problem area with small-diameter drills. Special PVD coating provides long tool lfe with a wide variety of work materials.
The SDM SumiDrill Power-Series offer an optimized design for drilling of stainless steel. Provided with latest technology of Sumi-Power Coating there are high adhesion resistance and high wear resistance to achieve a long tool life.
The SumiDrill Power-Series SDP-Type offers high efficient drilling in wide application range. Provided with latest technology of Sumi-Power Coating there are improved anti-adhesion as well as high wear resistance. Top performance parameters with maximum feed and stable long tool life are given.
The Super MultiDrill XHGS Type is a next-generation drill for deep hole drilling, features stable chip control and improved strength to further enhance efficiency of deep hole drilling. The application of our special thinning shape "RX thinning" reduces cutting resistance during high efficiency drilling. Improved chip evacuation makes it possible to reduce spindle load fluctuation, ensuring stable, long tool life. The XHGS Type provides excellent guide performance due to the unique design when compared to the conventional drill.
PDL/PCT tools cut in the Z axis direction where tool rigidity is highest, allowing high efficiency roughing for aeronautic components and dies with long tool overhang must be used to machine deep holes and pockets.
Our SMD MultiDrill MFS Type expands our line-up of detachable head type drills. Thanks to a point angle of 180° MFS Type is applicable to high-efficiency spot facing, drilling in non-flat surfaces such as inclined and cylindrical surfaces and interrupted drilling.
The SMD MultiDrill Series are detachable head type drills using a radial serrated connection design for high precision and strength. The exchangeable drill head provides a new cutting edge, higher productivity and cost efficiency with easy tool management. Regrinding allowance of 1,5mm to 3,0mm makes further tool cost reductions possible.
SumiDrill WDX type has excellent cutting balance that provides stable hole drilling in a wide application range. Available in three original chipbreaker styles, the WDX type features improved chip management and reduced cutting resistance for use in low rigidity set ups.
The SumiDual Mill DFC Type is a high-efficient shoulder milling cutter with double-sided 6-cornered inserts.
The SumiDual Mill TSX Type is a new high-efficient and high precision shoulder milling cutter with tangentially mounted carbide inserts.
The cutter body of WEX Type offers a high resistance against both abrasion and corrosion. Additionally the chip evacuation is supported by inner coolant and air pressure. The wave shaped cutting edges generate lower cutting forces whilst the high shear cutting action ensures smooth reliable cutting even when deep slotting or milling with low rigidity machines.
DGC Series are general-purpose cutter which provide high cutting edge strength for high efficiency milling and low-burr chipbreaker design that achieves high quality machined surface. Two types of inserts can be used with a single body depending on milling application to reduce costs.
The Wavemill WGX Type employs unique chipbreaker design to provide lower cutting resistance and higher quality surface finishes than conventional tools.
The Wave Radius Mill RSX Series enables stable machining even when using equipment with low clamp rigidity thanks to its body design achieving excellent cutting performance and rigidity. In addition to the ACM Series for stainless steel and exotic alloys two grades have been added: ACP200 grade for steel machining and ACK300 grade for cast iron machining. Handle an even wider range of milling needs with the RSX(F)08000 and RSX(F)20000 types.
Wave Mill WFX type for shoulder milling is a screw-locking type cutter capable of using four corners. Ideal cutting edge design delivers good squareness.
BNC2010 and BNC2020 are the latest additions to the coated SUMIBORON Series, to provide even better stability and longer tool life for hardened steel machining.
SUMIBORON Binderless is a polycrystalline cubic boron nitrid (CBN) that directly binds nanometer- or sub-micron-level CBN particles without binder materials. Binderless CBN is harder and has better thermal conductivity. Therefore, it enables higher efficiency and longer tool life in machining of hard-to-cut materials, such as titanium alloy and cobalt-chromium alloy.
The CBN boring systems BSME and SEXC were developed specifically for the machining of ultra small diameter holes in hardened steel. The entire boring bar series is equipped with internal cooling. In order to achieve high rigidity and accuracy, all boring bars are designed in carbide. For easy setup and handling, the use of a clamping sleeve, which can take all boring bar sizes by the unified shaft, is provided.
Our innovative HFT System combined with new 8-cornered CBN insert achieves a cycle time that is 6-times faster than conventional ones.
DA1000 is a high density, ultra-fine grained sintered PCD grade with high toughness similar to that of carbide. Excellent micro cutting edge geometry, optimum wear and fracture resistance facilitate high performance, longer tool life and achieve high efficiency machining especially during milling of aluminium alloys.
The PCD grade DA90 is our first recommendation for roughing of cemented carbides and hard and brittle materials.
NLD/NGD type chipbreakers achieve outstanding chip control in semi-and fine-finishing of aluminum alloys. The employment of high toughness grade DA1000 achieves stable, long tool life.
The binderless PCD grade NPD10 is our first recommendation for high-precision machining of tungsten carbide as well as hard and brittle materials.