Advantages with Airflo® - dissolved air flotation unit
The Malmberg Airflo® system includes:
Advantages with a Triton
Malmberg µXenic™ is an advanced filter treatment solution to be inserted as a fourth treatment step. The solution is based on the efficient Triton® underdrain filter system with a sand filter followed with active carbon filter. Modular thinking and a scaleable solution provides an off-site building where only a hall building is necessary on-site and x amount of tanks are placed above ground level in the building including automation.
Malmberg plastic chain scraper
Precision moulding to extremely close tolerances guarantees perfect form and uniform strength. The scraper blades shaping, made of nylon reinforced with glass fiber, gives it extra long service life. The scraper can be adapted to all usual types of rectangular sedimentation basins either with surface or bottom scraping or a combination of the two. Because it is resistant to corrosive environments, the scraper is especially suited for aggressive waste water and for operations using chemical dosages.
Robust and efficient diffussor
Malmberg disc difffusor has a diameter of xxx mm and a body of fibreglass reinforced plastic. The rubber membrane is specially designed to resist aggressive environments but also very easy to replace if necessary. The small perforations in the membrane ensures fine-sized bubbles.
Quick and easy installation
The superstructure is completely prefabricated and is mounted on a foundation or placed on a gravel bed, alternatively concrete casted. The well will have a excellent frost free spaceing which is easily accessabel by a door. At larger maintenance work as pump chnages the entire superstructure can be lifted of from the foundation. The house is locked and released by hatches on the inside.
Extra shell protection in the Solid version
As standard Furuboda has a layer of fully galvanized steel sheet . The walls consist of a core of insulating 40 mm extruded polystyrene plastic (80 mm as option) Furuboda can also be ordered with an outer wall shell protection of fiberglas armoured concrete board. A perforated aluminum sheet is also glued between the concrete board and the polystyrene core. We call it Furuboda Solid.
Furuboda in four sizes
Furuboda I: 1930 x 1930 mm
Furuboda II: 2930 x 1930 mm
Furuboda III: 2930 x 2720 mm
Furuboda Solid: 3340 x 2700 mm
Protect your other water installations
Prisma can also be used to protect water reservoirs. The superstructure is then placed above the descent door. It is also suitable for protecting valve installations above ground.
Service-friendly and easy handling of your well installation
The front of Prisma is easily opened by two spring dampers. Here is plenty of
room by inspection and service- and maintenance. For larger service work the
entire superstructure can be folded backwards and then exposing the
installation. The pump- and electrical installation are completely protected
from frost and external polution from th surface. The electrical equipment is
mounted on a wall panel made of aluminum, 800 x 1000 mm, and is fixed on the
base so it remains on its place when the superstructure is folded or off lifted.
Prisma in two sizes
Prisma I: 1850 x 1850 mm
Prisma II: 2850 x 1850 mm
Adapted to the surroundings and service-friendly
Yngsö well superstructure is developed to melt into the surroundings.
Standard colour is in Aluzink. For an additonal price Yngsjö is of course
available in other colours. For larger jobs, with the well, such as pump
cleansing or pump replacement, the superstructure can be easily lifted aside and
work can proceed unhindered.
Yngsjö in two sizes
Yngsjö I: 2000 x 2000 mm
Yngsjö II: 3000 x 2000 mm
Malmberg enerGeo™ is a completely pre-built geothermal central and is easily docked to the energy wells, as well as the property's heating and cooling systems. The approach has several advantages compared with the site-built centrals. Energy Drilling and landscaping with connections are made on-site and in parallel the energy central is built in our workshop. The central is then delivered as a complete unit including the electrical, control and plumbing installations. It is the docking that makes enerGeo™ so smart, its completed in the workshop and just docked in. A site-built geothermal central often needs to involve multiple subcontractors and working in the customer's building for a long time. Thanks to a prefabricated solution, you have full control over production and ensures that costs are kept down, resulting in a lower price for the customer. It only requires a power supply and the entire facility is directly prepared for remote support if needed.
Operating cost-effective and environmentally friendly
Geothermal heating is operating cost efficient, environmentally friendly and a sustainable heating technology compared with other alternatives as district heating, pellet, gas or electric boiler. 1 part electricity for the operation of geothermal heating results in heat production worth 4 parts. 1 part electricity for the operation of free cooling results in produced cooling worth 40 parts. Besides, the geothermal energy is also CO2 neutral and a renewable energy source. If you, as a property owner then only uses green electricity, such as wind, solar or hydropower your facilities will be completely environmentally friendly.
We can help you with