• Offer Profile
  • We offer more than 40 years experience and KnowHow in the development and manufacturing of components for bulk solids handling with the core competences storing-, conveying-, metering- and weighing technology as well as in the engineering and realisation of complete, automatic bulk handling systems.
Product Portfolio
  • Pneumatic conveying systems

  • The solids solutions group offers nine well-engineered and tested pneumatic conveying systems using components assembled by the company for the pneumatic conveying (pneumatic pressure- and vacuum-conveying). 

    With 45 engineers and technicians as well as highly trained staff in assembly, installation and service we are objectively able to offer the most advantageous system for pneumatic conveying for every product and every task.

    • solids Fly Pneu Dilute phase conveying Pressure- or suction conveying system
    • solids Fluid Pneu Dense phase pressure conveying Pressure- or suction conveying system
    • solids Step Pneu Push conveying Pressure conveying system
    • solids Split Pneu Dense phase conveying with bypass Pressure conveying system
    • solids Puls Pneu Low velocity conveying with bypass, impulse valve and relay stations Pressure conveying system
    • solids Vibro Puls Pneu Plug conveying with bypass, impulse valve and relay stations Pressure conveying system
    • solids Vacu Fill  Vacuum batch conveying suction conveying system
    • solids Vacu Dense Vacuum plug conveying with impulse valve and pressure bypass Vacuum batch conveying system
    • solids Truck Discharge Low velocity conveying with bypass and relay stations Pressure conveying system
      • solids Fly Pneu

      • Dilute phase conveying classic dilute phase conveying system for suction- or pressureconveying.
        Particles and particle clouds orstrands are carried by
        air flow.

      • solids Fluid Pneu

      • Dense phase pressure conveying
        Fluidised powders are carried as homogeneous material-/air mixture using thrust.
      • solids Vacu Fill

      • Dense phase-vacuum batch conveying
        products are carried fluidised or streamed using suction power.
      • solids Step Pneu

      • Push conveying with indicated plug formation.
        Grainy products with close grain spectrum are
        streamed and “slided” as stand or plug. The plug
        flow is indicated by air impulse.
      • solids Split Pneu

      • Dense phase conveying with bypass and cones or boosters for demanding bulk solids. For avoiding blockage longer plugs are being dissolved.
      • solids Puls Pneu

      • Low velocity conveying with bypass, impulse valve and relay stations.
        Plugs are generated and preserved and “slided”
        through conveyor pipes. Gentliest low velocity conveying for sensitive and abrasive products.
      • solids Vibro Puls

      • Plug conveying with bypass, impulse valve and relay stations.
        Non-flowing products are inserted with vibration and pressure into the conveyor pipes, plugs are generated und preserved and are slided without demixing through the conveyor pipes .
      • solids Vacu Dense

      • Vacuum plug conveying with impulse valve and pressure bypass for slow and gentle suction conveying.
      • solids Truck

      • Low velocity conveying with bypass, impulse valve and relay stations like„solids Puls Pneu“ using the silo truck as pressure vessel.
      • Weighing- and Metering-Technology

      • Taking out a certain quantity of material from a feed bin under control of a weighing unit and the transfer of this quantity to a downstream process is called gravimetric metering of batches. This has to be realized within a preset period of time at a preset velocity.

        This process is oftenly jeopardized by the wide spectrum of bulk material properties and the usually unfavorable ambient conditions for the weighing process, in which the scale has to work properly.

        The equipment necessary for metering is comprising the metering device, the scale and the pertinent control.

        For optimum results these units must be compatible and have to be suitable for the bulk material and also for the ambient conditions. However, the function of this assembly depends also on the proper design of the process interfaces at the intake and the discharge.
            • Small components batches

              • rotary bowl scale
              • bin scale
              • loss-in weight scale
              • suction scale
            • Middle an large components batches

              • bin scale
              • suction scale
              • silo scale
              • big-bag scale
            • Dosing equipment

              • Dosing screws
              • Vibratory metering screws
              • Precision dosing devices
              • Micro feeders
            • Liquids

              • dosing cabinet
              • bin scale
              • pipe loop scale
            • Loss-in-weight feeder

              • High-precision hybrid bin scale on a parallel guide bars system with mechanical tare compensation
              • Bin scale with direct induction of tare and net weight to the load cells
        • Storage and discharge - Complete silo installations

        • Bulk solids, produced or handled in a production process, have to be put on stock as a raw product, to be buffered as an intermediate product, or to be stored as a final product. The bulk solid has to be discharged from the storage bin and mostly forwarded to the downstream process by a mechanical conveyor. Special attention has to be paid to a suitable design of storage bin, discharge and conveying system, which have to be adapted to the bulk solid properties and the process requirements. Equally important is that all units fit together regarding the process technology.
              • Silo installations - Fitting to the product

              • A safe silo operation is important for a reliable production and preservation of the product quality. The following problems may require a solution:
                • Irregular material flow
                • Fast flow
                • Segregation
                • Particle degradation
                • Different retention times
                • Solidification over storage time / residues
                • Bridging
                • Formation of a central shaft
              • Pneumatic filling of silos

              • Most bulk solids are supplied by silo truck or railcar and have to be unloaded at the customer’s site into a storage silo. In most cases the conveying into the silo is made pneumatically. The following systems are available:

                solids truck discharger

                • The compressed air for conveying is generated by the compressor unit on board of the truck.
                • The vessel of the silo truck or railcar constitutes the pressure vessel.

                solids Puls-Pneu-Truckdischarger
                • The compressed air supplied by the truck’s on-board system is supported by compressed air from the plant net (high conveying capacity) or completely substituted (for gentle unloading without segregation).
                • The vessel of the silo truck or the railcar constitutes the pressure vessel
          • Equipment for silo installations from our own production

              • Silo equipment for silos and bins

                • Vibratory bottoms
                • Fluidized cones
                • Fluidising panels, cushions, pipes
                • Mechanical agitators
              • Filling stations for:

                • Silo trucks
                • Big-Bags
                • Barrels and containers
              • Mechanical convveyors and metering devices

                • Tubular screw conveyors
                • Trough screw conveyors
                • Metering screws
                • Rotary valves
                • Clearing rotary valves
                • Rotary metering valves
            • Process automation

            • Automation of bulk solids handling systems

              Automation and storage, automation and discharge:
              The storage of large bulk solids quantities is realised in silos, big-bags and containers, equipped with automatic discharge aids for a safe extraction of the required product amount from the container. In case of larger capacities the bags emptying is made automatically; at smaller discharge capacities the manual discharge process is usually supported by mechanical devices (like hoists ....).

              Automation and conveying:
              The application of automation technologies in the field of bulk solids transport - comprising both mechanical systems (screw conveyors, bucket elevators, chain conveyors...) and also pneumatic systems (conveying under overpressure and by vacuum, fluidized bed chutes...) - has a very strong impact on production and productivity. It allows to transport even very large bulk quantities in a reliable and safe manner over great distances without human intervention.
                • Plant control by PLC

                • For the automation of bulk solids systems we apply mainly PLC controls based on SIEMENS S7 or equivalent systems.

                  These control systems supervise the instruments connected to the inputs of the switch cabinet and control – depending on their values and in accordance with the program – the actuators connected to the outputs. The inputs are given by pressure transmitters, temperature detectors, limit switches, rotation detectors etc. The outputs control gear motors and positioning drives.

                  The control disposes about AND/OR functions, counters, markers and timers; which enable it to operate even time–related.

                  The application of PLC controls allows to realise both control purposes and also regulating functions.
                • Process visualisation

                • The visualisation serves to display the actual operating conditions of the plant.

                  The plant is visualised on a PC screen by diagrams for overview and details showing schematically all operation conditions (ON, OFF, MALFUNCTION).

                  Mouse and keyboard allow the access to the visualisation.

                  This allows at any time a detailed overview on the actual operating conditions of the entire plant.

                  Detailed diagrams show in different colours the actual operating conditions of all units (ON, OFF, MALFUNCTION).

                  Several different parameters of the individual units can be displayed and modified if required.

                  Analog and binary signals (process data) can be manually displayed as time diagrams or inserted permanently into the diagrams.

                  In a protected service mode the units can be switched on and off without interlocks even in the automatic mode, but also in the manual mode.
                • Process control system

                • The control room is the heart of every installation, where all signals from production and process are coming in – this is the place where the automation of the plant and the synchronisation of the processes is realized.

                  The process control system serves to control a process plant by
                  • Field devices
                  • Work stations for operation and monitoring
                  • The free programmable control system with batch program

                  The field devices (sensors – like e.g. pressure transmitters – and actuators – like regulating valves) realize the control and regulation duties. The work stations for operation and monitoring serve to visualize the process plant and are connected to the field devices by a bus system.
                • Basic Engineering / Functional Description

                • For the elaboration of the control sequences a graphic tool is applied, which follows the functional plan (acc. to DIN 40719, part 6) as well as the sequential function charts (acc. to IEC 1131-3). This formal description allows a smooth transition between the development phases analysis, draft and implementation.

                  The process sequence is described verbally characterized by its funtcional groups, single steps, control steps, forward switching conditions, interlockings and start conditions.

                  This form of decription has the particular advantage, that also personnel not being familiar with automation technology is enabled to understand and comprehend without problems the sequences and interdependences of the process technology.
              • Intralogistics for bulk solids

                    • Non-interfaced integrated storage-, conveying-, metering- and automation-systems

                      • Comprehending of task and target
                      • Analysis of raw material and intermediate goods regarding quality and flow behaviour
                      • Conception of complete process-solutions
                      • Engineering completely with process engineering, machine process technology and automation
                      • Manufacturing and delivery of the whole equipment
                      • Assembling mechanical and electrical, commissioning, instruction and support of the operational staff
                      • „Full Service“ all around-the-clock
                • Branch solutions

                    • Food & Beverages

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the food industry and is developing continually new, individual solutions.

                      Reference solutions for:
                      • Confectionery
                      • Pasta
                      • Dairy products
                      • Sauces and Spices
                      • Beverages
                    • Chemistry

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the chemical industry and is developing continually new, individual solutions.

                      Reference solutions for:
                      • Generic Chemistry
                      • Laquers and Paints
                      • Detergents and Body Care
                    • Minerals

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the mineral industry and is developing continually new, individual solutions.

                      Reference solutions for:
                      • Minerals handling
                      • Building material
                      • Ceramics
                    • Plastics & Rubber

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the plastics and rubber industry and is developing continually new, individual solutions.

                      Reference solutions for:
                      • Technical rubber
                      • Duroplast preparation
                    • Feeding stuff

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the feeding stuff industry and is developing continually new, individual solutions.

                      Reference solution for:
                      • Feeding stuff
                    • Environment

                    • system-technik GmbH has more than 40 years experience in the engineering and realisation of automatic bulk handling systems for the environmental industry and is developing continually new, individual solutions.

                      Reference solutions for:
                      • Deashing
                      • Adsorbent handling
                  • Equipment & Components

                      • Discharging devices

                      • The discharging of bulk solids from silos or containers requires improving the product's flow characteristics.
                        Many bulk solids do not discharge freely through the generally feasible, expedient filling/discharge cross sections.
                        Flow is achieved by the application of force to loosen up settled grains/particles/fibres.
                        Depending on product characteristics, operating conditions and the type of task, vibration, fluidisation / ventilation, or mechanical agitation / mechanical tumbling is selected as a suitable method for discharging.
                        The solids discharging devices are offered in the 4 Designlines solids Basic, solids Clean, solids Hygienic, solids Heavy.

                          • Vibration Bin Discharger "ExtraVib" Type EVK

                          • Discharge out of silos with mass flow avoids clearance volumes and segregation, permits high loads.
                          • Vibration Bin Discharger "ExtraVib" Type EVK-Hygienic

                          • Using mass flow for silo discharge under hygienic conditions, avoids dead zones and particle segregation, permits high loads, Hygienic Design acc. EHEDG-Guidelines
                          • Vibration Cone Type EVS

                          • In addition to a smooth discharge from containers or silos, our vibratory hoppers also provide high metering consistency by optimally filling the metering device.
                          • Aeration Bottoms Type FLC

                          • Discharge and homogenising of fluidizable powders and dusts, gentle treatment of the discharged material.
                          • Aeration Panel Type ADS/Aeration Pad Type ADF/Aeration Stick Type FLS

                          • Selective aeration, flexible installable at the necessary points, part-fluidization in the silo cone.
                          • Agitator Type BAR

                          • Homogenising and discharge, better dosing accuracy, optimal adaption of the agitator geometry to the product characteristics.
                        • Conveying screws

                        • In the field “Mechanical Conveying” are used rotary valves as well as screws.

                          S.S.T.-Schüttguttechnik GmbH offers rotary valves in the following designs: Standard, Protection system, Clean and Hygienic.

                          There are two designs of screw conveyors: tubular and trough. The screw's helix can be either full-bladed or shaftless. Screw conveyors are used both in heavy industry and in the fine chemicals industry. Screw conveyors basically consist of a trough or tube, the screw, which consists of a screw shaft with a helical blade, and a drive unit. Carbon or stainless steels as well as wear-resistant or heat-resistant materials are used for this purpose.

                          Our experts will select the proper rotary valve or screw type for your application depending on product characteristics, operating conditions and the type of task.

                            • Tube Screw Conveyor Type DSR

                            • Mechanical conveying and dosing of bulk solids, horizontal or diagonal, broad application spectrum for many products.
                            • Rotary Valves Type ZRS

                            • Dosing rotary valve, low pulsation where applicable with plenty pockets rotor, ideal for products wich are tending to extreme flow.
                            • Trough Screw Conveyor Type DST

                            • Easy top accessibility with demountable cover, well possibility of cleaning and simple inspection or revision.

                            • Self Cleaning Rotary Valve Type RRS

                            • Trouble-free discharge and dosing of sticky, non-flowing bulk solids, with self cleaning paddle for completely emptying of the pockets.
                          • Filling devices

                          • Bulk solids are filled into or conveyed to specialised vehicles, big bags / freight containers, barrels or other units.

                            Filling is often combined with weighing and metering. Precision - i.e., the correct detection of the filled weight - reproducibility and metering control are crucial here. Usability is also a key issue.

                            The filling process can be fully automated through a complete electrical and pneumatic installation with integrated control.

                              • Filling Chutes Type TLB

                              • For dustfree loading of bulk solids out of silos or processes into trucks or railway carriage.
                              • Filling Chute Type TLC

                              • Dust-free loading of bulk solids from silos or processes to lorries or railway cars. Particularly suitable for abrasive products.
                              • Big-Bag Filling Device Type BFA

                              • Dustfree filling of all kinds of big-bags, optional
                                modules like cross lifting table, compactor,
                                dusttight docking, scale and control.
                              • Drum Filling Device

                              • Dustfree filling of drums and other packages, optional modules for weighing, compacting, locking.
                              • Packing stations

                              • Filling of small-sized packages and minimum-sized packages with highest accuracy and reproducibility
                            • Emptying devices

                            • Bulk solids are discharged from: Big bags, containers, sacks, or barrels. The reliable and usable complete solution provides Big bag attachment, dustproof connection, discharging and integrated control.

                              The container to be discharged is moved into a suitable position. Then the solid goods are discharged, either by free-fall or using a discharging device or metering device. Frequently, a discharging tool is required to facilitate product flow and to ensure a complete discharge.

                                • Big-Bag Dischargers Type BBD

                                • Dustproof and easy-to-operate emptying of all types of big-bags, docking unit manually operated or pneumatically with clamping device. Options: double rocker and tumble frame as a discharge aid, hopper, metering equipment, big-bag handling by crane or forklift.
                                • Big-Bag Discharger Type BAB

                                • Economic solution: big-bag support plate with base frame. Options: discharge aid vibration hopper with unbalanced motor or tumbling device with pneumatic cylinder and punching tool, discharge hopper.
                                • Big-Bag Sack Discharger Type SBD

                                • Dustfree and easy operating emptying of all kinds of big-bags and sacks in one equipment, modular construction, options for big-bag-handling by crane or fork-lifter, different discharge helps, inliner traction device, sack-chute Type SMS, optional with vibration sieve, filter, fan, discharge help, also for separate installation.
                                • Container Discharger Type CVD

                                • Dustfree emptying of all kinds of containers, all-purpose, all dosing and conveying systems can be connected, all container sizes possible.
                                • Bag Discharger Type SMS

                                • Dustfree and easy operating emptying of all kinds of sacks, optional with vibration sieve, filter, fan, discharge help, weighing and dosing.
                              • Pneumatic conveyors

                              • Pneumatic conveyance is implemented using the following devices:
                                Pneumatic senders (container conveyance), airlock feeders to pneumatic conveying systems, Vacu-Fill cyclic suction conveyors, selector valves and conveyor line parts.
                                They are used both in heavy industry (carbon steel) and in the fine chemicals industry (stainless steel).
                                Both dense and lean-phase conveying methods are possible, either pressure or vacuum-operated.
                                  • Pneumatic conveyors in Hygienic Design

                                  • Pneumatic conveyor in Hygienc Design acc. EC-guidelines, fulfills GMP- and FDA-requirements
                                  • Pneumatic Conveyor Type PHP

                                  • Dense phase conveying with push conveying process and high loading, low velocity for a gentle transport of sensitive or abrasive bulk solids.
                                  • Feed Conveyor Type PIP

                                  • PIP-type feed conveyor for pneumatic dense-phase conveying by pushing. Thanks to their high load capacity and low operating speed damage to the transported goods is minimised. They are particularly suitable for sensitive or abrasive bulk solids.
                                  • Blow Trough Rotary Valve Type DBS

                                  • Dosing rotary valve for continous feed into pressure - or vaccum conveying pipelines.
                                  • Rotary Valves Type ZRS with Leakage Air Collector and Blowing Shoe

                                  • For pneumatic pressure conveying
                                  • Vaccum Batch Conveyor Type VACUFILL

                                  • Alternate filling and discharge of the vaccum batch conveyor, suction under vacuum, completely discharge by pressure impulse.
                                  • Vacuum batch conveyors VACU FILL in Hygienic Design

                                  • The hygienic vacuum batch conveyor for pneumatic vacuum conveying.
                                    Alternating the filling and emptying.
                                  • Batch vacuum push conveyor Type PCV

                                  • The compact batch vacuum push conveyor:
                                    Reliable technology for safe conveying of even those products that have poor flowing properties
                                  • Multi-Way Diverters Type MWW

                                  • Diverters for pneumatic pressure conveying pipelines or collector of vacuum conveying pipelines, up to 20 exits, plane and jointfree material duct, free of clearence volume.
                                  • Multi-Way Diverters Type MWW abrasive resistant design

                                  • Diverter pipe and connections with ceramic lining or hardened / heavy-walled pipe
                                • Dosing equipment

                                • 1. Filling the metering unit, resp. drawing product from store
                                  2. Discharging the metering device, e.g. chambers, pockets, or cells, and supplying a fixed product quantity to the downstream process.

                                  The objectives are a high volumetric metering accuracy, as well as continuity and reproducibility. Ideally, this objective is achieved by 100% filling and then 100% discharging isolated metering units.

                                  Typical volumetric metering devices:

                                  • Rotary airlock
                                  • Micro-metering airlock
                                  • Metering screws
                                  • Vibratory metering screws with hoppers
                                  • PreciDos precision metering device
                                  • Scraper-equipped rotary airlocks
                                    • Rotary Valves Type ZRS

                                    • Dosing rotary valve, low pulsation where applicable with plenty pockets rotor, ideal for products wich are tending to extreme flow.
                                    • Microfeeding Rotary Valve Type MDS

                                    • Pulsationfree dosing of products, which are tending to extreme flow or sticking, with high accuracy, for low and lowest capacities.
                                    • High precision micro feeders

                                    • with rotating bowl scale for minimum-sized components, high accuracy and liability up to +- 0,05g, easy and flexible operation
                                    • Linear Powdering machine

                                    • Realising of sprinklings on the width of the machine with good distribution profile and with a large flexibility
                                    • Multi-heads feeders

                                    • Concurrently, quickly and precisely dosing of the same feed material on multi heads
                                    • Dosing Screw Type DSC

                                    • Dosing with high accuracy and constancy, all-purpose, horizontal or diagonal, measurement fabrication.
                                    • Dosing screw Type DSC-Hygienic

                                    • Dosing screw with high precision, design acc. to EHEDG-Guidelines for maximal production hygiene, with Europe-Patent protection
                                    • Vibration Dosing Screw Type DSV with Vibration Cone

                                    • Reliable dosing with optimal filling, low pulsation, high accuracy, avoid of bridging in the inlet.
                                    • Precision Dosing Equipments for PreciDos Type DSA

                                    • Dosing with highest accuracy, easy removable, easy to clean, suitable also for lowest capacities.
                                  • Weighing equipment

                                  • Weighing includes all methods of mass determination used in a system, including the use of mechanics, electronics, controls and peripherals.

                                    A scale's method of operation is determined by the process conditions: Either continuous operation or batch operation is required.

                                    A scale consists of the following components: A tray for holding goods for weighing until their discharge, a load frame/weighing module, peripherals including supply and discharge metering devices, a measuring amplifier with mass indicator, and a metering control unit.

                                      • Rotating Bowl Scale GiroScale Type GSC

                                      • Weighing hopper, 180° rotable for emptying, very compact design, scale capability up to 50 kg, very high accuracy, ideal for small components +- 1 g.
                                      • Hopper Scales Type BSG/BSN

                                      • Weighing hopper, direct on load cells type BSG, or on guided scale frame in a parallel handle bar system type BSN, avoiding disturbing forces, with mechanical tare compensation, according to accuracy demand.
                                      • Vacuum Scales Type SVN

                                      • Combination of pneumatic vacuum conveying with hopper scale and dosing for compose charges.
                                    • Fine dosing - The fine art of fine dosing

                                    • S.S.T. Schüttguttechnik GmbH introduces on the German market a new brand of gravimetric micro feeders and powdering machines on the brand name Fine dosing. Thanks to an exclusive principle of extraction, highly developed, Fine dosing system is creating new standards in term of accuracy, speed and flexibility.

                                      How does this technology work?
                                      Take a coin on a paper sheet, and move it with an alternate movement whom return speed is higher than forward way. You can see that the coin is moving to the right side of the sheet…
                                      Movement is given by a mechanical mechanism working in oil bath, designed for long term operation with low maintenance needs.
                                      Based on this principle; a full range of advanced feeders and solutions has been developed: loss-in-weight feeders, Micro feeders of high accuracy, powdering machines, multi heads volumetric feeders

                                        • Loss in weight feeder

                                        • For batch feeding from 10 g to 50 kg, with accuracy from 1 g. This feeder can feeder can be operated in a continuous mode, with flow regulation.
                                        • Micro feeder with high accuracy

                                        • Design for small and accurate batch feeding. Four level of accuracy, from 0.1 g to 0.1 mg.
                                        • Linear powdering machine

                                        • For continuous scattering of dry ingredients, width up to 2 m.
                                        • Multi-heads feeder

                                        • The best solution on the market, to give on multiple application points, a simultaneous, quick and accurate dispensing of ingredient, with perfect sprinkling effect.
                                        • Hygienic packing machine

                                        • For accurate filling of bags or pots: accuracy below 1 g.
                                      • Rotary valves

                                      • Rotary valves are used for the dosing, feeding or the discharge of fine-grained and powdered materials or granulates.
                                        S.S.T.-Schüttguttechnik GmbH offers rotary valves in the following designs: Basic, Protection system, Clean and Hygienic.

                                        Our experts will select the proper rotary valve or screw type for your application depending on product characteristics, operating conditions and the type of task.

                                          • Locking valves for bulk solids

                                          • Despite the broad range of available shut-off devices for solids it can be quite a challenge to find a suitable device for a particular set of requirements.

                                            Requirements might be, for instance:

                                            Pressure-resistant, dustproof and reliable:

                                            • abrasive or poorly flowing bulk solids
                                            • at temperatures exceeding 200 °C
                                            • with high availability through long seal maintenance intervals and low-maintenance operation
                                            • compact design
                                            • preventing any escape of product or gases to the outside

                                            As of May 2002, shut-off devices for bulk solids with operating pressures exceeding 0.5 bars are required to fulfil the new Pressure Equipment Directive 97/23/EC.

                                            Typical shut-off devices for bulk solids:

                                            • Slide gate valve
                                            • Rotary gate valve
                                            • Butterfly valve
                                            • Chambered airlocks
                                            • Segmented shut-off devices
                                              • Slide Gate Types FSH-FSP-FSE

                                              • Dust tight locking of powdery to granular bulk solids, with different flange dimensions, as a emergency valve, f.e. for maintenance and as a process valve, measurement fabrication.
                                              • Pivoting Shutter Type SSP

                                              • Pressure tight locking valve for pressure-/vacuum-hoppers, pipelines or reactors, free passage when open, shutting disc is not leaving the housing when open/close position.
                                              • Chamber Valve Type DSP

                                              • Lock out and dosing out of a pressure-/vacuum-system or lock in f.e. into a reactor, filling and discharge discontinously, interlock for gases and vapours.
                                              • Flap Valve Types DKP-DKH

                                              • Dust tight, pressure tight and vacuum tight locking valve for silos, hoppers and pipelines, special design for bulk solids, simple and low-cost design, low height, easy to dismantle and to maintain.
                                              • solids Disc valve Type DKA-Hygienic

                                              • Special design for bulk solids,
                                                Hygienic Design acc. to EHEDG-Guidelines
                                            • Diverters for bulk solids

                                                • Lump crushers

                                                • Lump crushers for breaking down lumps or agglomerates are always used if in a process (usually) undesirable, large lumps of material are formed due to storage, sedimentation or pressure. A dedicated mill is impractical or unprofitable in most cases. Lump crushers may be integrated into a system without requiring additional conveyors or vacuum devices. This increases cost effectiveness and reduces space requirements. Areas of application include chemicals, environmental engineering, construction materials and powdered minerals, as well as foodstuffs.
                                                    • Coarse Crusher Type K1G

                                                    • Breaking up lumps and agglomerates, arising from storage or pressing, or recycling materials, low height, replaceable grate with defined gap.
                                                    • Fine Crusher with Sieve Type K1S

                                                    • One-shaft lump breaker with sieve, exact defined particle size, horizontal beam beating mechanism, semicircular formed sieve with support, repleacable.
                                                    • Fine Crusher Type K2

                                                    • Two-shaft lump breaker with toothed plates, adjustable gap geometry, with scrapers or sieve.
                                                    • Coarse-Fine Crusher-Combinations Type K3R

                                                    • Three-shaft lump breaker for crushing coarse lumps and crusts in one or two stages.