Navigation : EXPO21XX > PROCESS INDUSTRY 21XX > H45: Energy > DEBEM
Videos
Loading the player ...
  • Offer Profile
  • Debem has been operating in the liquid transfer sector for more than 30 years. A pioneering business specialising in industrial pumps for highly corrosive and aggressive applications.

    The entire company philosophy hinges on close cooperation with the end user and customer feedback, thus establishing a highly-effective technological design and development system for products and services that has gained the approval of an increasing number of leading players in various sectors.
Product Portfolio
  • SERIES DM - MAGNETIC DRIVE CENTRIFUGAL PUMPS

  • DM magnetic drive centrifugal pumps are succesfully suitable for many different application fields such as: laboratory technique, medical equipments, photo processors, x rays film processors, laser beam systems, metal finishing machines, graphics, heat exchangers.

    Components and material
    1. Shaft Alumina in ceramics 99,7%
    2. Thrust bearing washer in PTFE + 30% Graphite
    3. Bearing in PTFE + 30% Graphite
    4. O-ring in VITON/EPDM
    5. Impeller in PP/PVDF+CF
    6. Pump Casing in PP/PVDF+CF
    7. Head thrust bearing washer in alumina Ceramics 99,7%

    Main features
    • vailable in polypropylene, pvdf;
    • Positive suction head operation;
    • Weldless;
    • High flow rates: from 5 to 35 m3/h ;
    • Quick and easy maintenance;
    • Inexpensive spares;
    • There is no possibility of fluid leakage;
    • Head: up to 24 mt;
    • Viscosity: up to 150 cps;
    • Motors:
      Standard iec - ip 55 - class f - 2 pole - 2.900rp
      Optional: three phase 230/400v 50/60 hz
      Single phase 230v 50/60 hz
    • Working temperatures:
      PP min +3°C/max +65°C
      PVDF min +3°C/max +95°C

    How it works
    A couple of magnets leads the operation of the pump; the outer magnet placed on the drive shaft transmits the motion to the inner magnet integrated with the impeller that is hermetically insulated. The pump impeller is not physically fixed to the drive shaft, seals are therefore eliminated and this consequently avoids leakages of the liquid drawn by the pump which are usually due to its wear and tear. The pump head is manufactured with few components, thus the maintenance of which becomes extremely easy. The materials used as standard are polypropylene (pp) and polyvinylidene fluoride (pvdf). The pumps can’t run dry. Dirty liquids can reduce the pump life.
      • DM 06

          • DM 06 PP

          • TECHNICAL DATA
            Intake connections G 1” F
            Delivery connections G 3/4” m
            Max. flow rate 6 m3/h
            Max. head 8,5 m
            Max. viscosity 150cps
            Construction materials PP - PVDF
          • DM 06 PVDF

          • TECHNICAL DATA
            Intake connections G 1” F
            Delivery connections G 3/4” m
            Max. flow rate 6 m3/h
            Max. head 8,5 m
            Max. viscosity 150cps
            Construction materials PP - PVDF
        • DM 10

            • DM 10 PP

            • TECHNICAL DATA
              Intake connections
              1” 1/2 F
              Delivery connections 1” m
              Max. flow rate
              13 m3/h
              Max. head 13,8 m
              Max. viscosity 150cps
              Construction materials PP - PVDF
            • DM 10 PVDF

            • TECHNICAL DATA
              Intake connections
              1” 1/2 F
              Delivery connections 1” m
              Max. flow rate
              13 m3/h
              Max. head 13,8 m
              Max. viscosity 150cps
              Construction materials PP - PVDF
          • DM 15

              • DM 15 PP

              • TECHNICAL DATA
                Intake connections
                1” 1/2 F
                Delivery connections 1” 1/4M
                Max. flow rate
                23,5 m3/h
                Max. head 19,8 m
                Max. viscosity 150cps
                Construction materials PP - PVDF
              • DM 15 PVDF

              • TECHNICAL DATA
                Intake connections
                1” 1/2 F
                Delivery connections 1” 1/4M
                Max. flow rate
                23,5 m3/h
                Max. head 19,8 m
                Max. viscosity 150cps
                Construction materials PP - PVDF
            • DM 30

                • DM 30 PP

                • TECHNICAL DATA
                  Intake connections
                  2 F
                  Delivery connections 1” 1/2M
                  Max. flow rate
                  35 m3/h
                  Max. head 24 m
                  Max. viscosity 150cps
                  Construction materials PP - PVDF
                • DM 30 PVDF

                • TECHNICAL DATA
                  Intake connections
                  2 F
                  Delivery connections 1” 1/2M
                  Max. flow rate
                  35 m3/h
                  Max. head 24 m
                  Max. viscosity 150cps
                  Construction materials PP - PVDF