Videos
Loading the player ...
  • Offer Profile
  • Innovative farming technology for high-yield agriculture.

    We develop innovative solutions for productive and efficient agriculture. We focus all our know-how accumulated over centuries on developing technologies that help you to grow crops sustainably and successfully.

    For over 240 years, we have been developing and manufacturing agricultural technology for farmers all over the world. For profitable agriculture, important prerequisites must be fulfilled in various areas. We are at your side and supply you not only with what you need for your farm, but also with much more.

Product Portfolio
  • Soil Cultivation

  • We let your soil breathe

    LEMKEN is always at least one step ahead as far as pioneering soil cultivation solutions are concerned. Our ploughs, furrow presses, cultivators, compact disc and rotary harrows feature numerous well-designed details and additionally powerful electronics to combine operating comfort with ultimate safety and reliability of use for both conventional and conservation tillage.

      • Ploughing

      • A clean plough furrow - a prerequisite for safe and high yields

        The use of ploughs is gaining more and more importance in arable farming as the use of crop care products is being reduced. For many farmers, ploughs are the first choice, above all as an alternative to the use of total herbicides and as a means to control herbicide resistant weeds.

        LEMKEN ploughs are available in numerous versions and with quadruple or variable working width adjustment. With extensive equipment, they can be adapted to all individual conditions. Many models are also suitable for onland use with wide tyres to protect the soil.

        Advantages of Ploughing

        • Controls weeds.
        • Breaks the transmission chain of infectious diseases caused by pests.
        • Reduces pest populations (mice, slugs...) and associated damage.
        • Incorporates organic matter.
        • Aerates the soil to promote the gas exchange necessary for the mineralisation of organic matter.
        • Perfectly levels the surface horizon.
          • Mounted Ploughs - Juwel 6

          • The particularly light Juwel 6 is available in a 3- to 5-furrow versions featuring a four working widths or variable working width adjustment.

            • Frame diameter 110 mm.
            • Frame height 80 cm.
            • Body spacing 90 or 100 cm.
            • Also available with mechanical non-stop overload safety device.
            • Choice from an extensive range of plough bodies, skimmers and other equipment.
            • For tractors from 50 - 130 hp.
            • 3-5 furrows.
          • Mounted Ploughs - Juwel 7

          • The easy to pull Juwel 7 is available in 3 - 6 furrow versions with 4 or variably adjustable working widths. Numerous equipment options of the larger Juwel 8 and 10 ploughs are also available for the Juwel 7.

            • From 3 to 6 furrows.
            • Tractors between 70 - 200 Hp | 51 - 147 kW.
            • 120 x 120 x 10 mm box section frame.
            • Frame diameter 120 mm.
            • Frame height 80 cm.
            • Body spacing 90, 100 or 120 cm.
            • Also available with mechanical non-stop overload safety device or hydraulic overload device OptiStone.
            • Choice from an extensive range of plough bodies, skimmers and other equipment.
          • Mounted Ploughs - Juwel 8

          • The 3 - 7 furrow Juwel 8 impresses with a wide range of variants and available options. Like the Juwel 10, it is available with OF equipment for onland or in-furrow ploughing. The Juwel 8i has ISOBUS control and is therefore particularly easy to operate.

            • From 3 to 7 furrows.
            • For tractors from 90 - 315 hp.
            • Body spacing 90, 100 and 120 cm.
            • Frame diameter 140 mm.
            • Frame height 80 cm.
            • Also available with mechanical non-stop overload protection (X-versions) or hydraulic overload protection OptiStone (U-versions).
            • Also available in OF version for onland and in-furrow ploughing.
            • Choice from an extensive range of plough bodies, skimmers and other equipment.
          • Mounted Ploughs - Juwel 10

          • The 4 - 7 furrow Juwel 10 is specially designed for heavy conditions and large tractors with up to 450 hp and can be an alternative to the semi-mounted plough. Like the Juwel 8, it is available with OF equipment for onland or in-furrow ploughing. For safer transport and to reduce the load on the tractor, special top link damping and a transport function are available.

            • From 3 to 7 furrows.
            • For tractors from 150 - 450 hp.
            • Body spacing 90, 100 and 120 cm.
            • Frame dimension 160 x 160 x 10 mm.
            • Frame height 80 cm.
            • Also available with hydraulic overload protection OptiStone (U-versions).
            • Also available in OF version for onland and in-furrow ploughing.
            • Memory turnover device for particularly convenient adjustment available.
            • Choice from an extensive range of plough bodies, skimmers and other equipment.
          • Semi Mounted Ploughs - Diamant 16

          • Diamant 16 is built for performance and equipped with all our technologies to help you achieve a high level of productivity. On the road or in the field, you will appreciate the comfort!

            • From 5 to 9 furrows.
            • Tractors from 110 kW | 150 hp.

            Diamant 16: easy handling & high efficiency

            • For more clearance
            • Traction booster
            • OptiLine adjustment system
            • OF-Version
            • Horizontal draw point adjustment
            • Reliable & long service life
          • Semi Mounted Ploughs - Titan 18

          • The demands placed on modern semi-mounted reversible ploughs are becoming ever more stringent as farms continue to increase in size. In view of various factors such as yield potential, precipitation and different crop rotations, farm managers still rely on powerful and efficient plough technology. Handling, quality of work and increase in productivity play an important role. With the Titan 18, LEMKEN fulfils farmers’ high demands. The Titan 18 semi-mounted reversible ploughs are used exclusively as onland versions to protect soils.

            • From 9 to 13 furrows.
            • Tractors from 132 kW | 180 hp.
            • Body spacing 100 cm.
            • Frame dimension 180 x 180 x 12.5 mm.
            • Frame height 80 cm.
            • Also available with hydraulic overload protection OptiStone (U-versions).
            • Choice from an extensive range of plough bodies, skimmers and other equipment.
            • Available as Titan 18 with four settings or as Titan 18 V with hydraulically adjustable working width.
        • Reconsolidation

        • LEMKEN pays a lot of attention to optimal reconsolidation: with different packer types or following rollers of the machines for seedbed preparation and stubble cultivation.

          When ploughing, the soil is loosened, crumbled and at the same time its porosity volume is increased. This allows air and heat to enter the soil and interrupts the soil capillaries. Because of tight crop rotations, there is usually no time for gradual settling and natural fermentation of the soil. In addition, drying out of the ploughed soil must be prevented. On the other hand, capillary action must be restored as quickly as possible for the seed sub-bed.

            • Furrow Presses - FlexPack

            • Distance from farm to field, often increases with farm size. This means furrow presses fully-mounted on the plough, offer a practical and time-saving solution by avoiding the need for a separate transport tractor. The FlexPack can also deal with variable working widths for mounted ploughs.

              Advantages

              • The packer frame runs parallel to the plough frame. This avoids strips of land being double pressed when the plough does not utilise its maximum working width. Thus the FlexPack guarantees uniform reconsolidation of the soil.
              • The FlexPack is also used during ploughing of the first furrow, and the packer can be used both at the headland and side edges of the field.
              • Packer ring arrangements offset in pairs, with a diameter of 60 cm V-profile, ensure that work is performed without any clogging. This ensures an excellent pressing effect whilst preventing them sinking too deeply into the soil.
              • The load, transferred to the FlexPack, can be adjusted hydraulically to provide the optimum level of consolidation for the conditions.
            • Furrow Presses - VarioPack

            • Immediately behind the plough, and thus at the most favourable moment and in the optimum moisture state, the soil is reconsolidated at the depth of the crock and coarse clods are broken up. The formation of fermentation is promoted and drying is prevented. The capillary action interrupted by the loosening and crumbling of the soil and the enlarged pores is quickly restored. The furrow press thus lays the foundation for the seedbed in the tight crop rotations.

            • Furrow Presses - VarioPack Frontpacker

            • The front packer (FE) is characterised by its short design, active steering, and a very favourable centre of gravity. It is available with one row of rings in rigid and folding versions.

              Due to its reconsolidation, apart from the plough furrow press with push device, the VarioPack attached to the front hydraulics prevents the tractor wheels from sinking deep into the soil and the formation of a ridge between the wheels.

          • Seedbed Preparation

          • The soil is the most important resource in productive agriculture. Choice of the primary cultivation procedure, for the particular location, and optimal use of technology, help retain the long-term profitability of the soil. An important factor for a successful harvest is the preparation of seedbeds.

            Tasks of seedbed preparation

            • Levelling the surface to create uniform conditions for sowing.
            • The tools must break up clods, lumps and crumbs.
            • Optimum distribution of aggregate sizes and creation of a longterm structural stability of the soil
            • Cultivation to a consistent working depth.
            • Adequate reconsolidation of the soil under the seeds to ensure the water supply of seedlings are during the first growth phase.
            • Create a large enough pore volume in the topsoil, to ensure an adequate supply of water and air to the plant roots.
              • Power Harrows - Zirkon 8

              • The Zirkon 8 is the rotary harrow model for tractors with 60 to 175 HP. Various additional equipment options enable to adapt the rotary harrow to suit your operational conditions in seedbed preparationpreparation.

                • From 2,5 m to 4 m working width
                • Tractors between 60 - 175 Hp | 44 - 129 kW
                • Maximum robustness
                • Wide range of tines
                • Combinable with seed drills
                • Rear and front mounting
                • Optional adjustment of the crumbling intensity
                • Easy to adjust
              • Power Harrows - Zirkon 12

              • The Zirkon 12 is suitable for maximum constant load both in conventional and conservation-tillage procedures in the seedbed preparation. The active tools of the Zirkon 12 prepare an optimum seedbed in almost all soil conditions. The intensity of preparation can be specifically adjusted by selecting appropriate combinations of forward travel speed, PTO speed, and the transmission setting of the rotary harrow.

                • From 3 m to 6 m working width
                • Tractors between 90 - 408 Hp | 66 - 300 kW
                • Welded gearbox
                • DUAL-Shift transmission
                • Quick-change tine system
                • Also available in folding version
              • Seedbed Combinations - Korund 8

              • The Korund seedbed combination is characterised by particularly good levelling, loosening and grubbing with a high degree of surface coverage. It capacity, due to its various tine options, is demonstrated in professional potato or maize cultivation.

                • From 3 m to 12 m working width
                • Tractors between 65 - 420 hp | 48 - 309 kW
                • Passive seedbed combinations
                • Short and compact design
                • Flexible support arms
                • Deep or flat seedbed preparation
                • Toothed bar crumblers with maintenance free ball bearings
              • Seedbed Combinations - System Kompaktor

              • The Kompaktor is the ideal machine for preparing a finely cultivated, well reconsolidated seedbed with an even depth. This provides the basis for an even establishment, particularly of fine seeds like sugar beet and rape seed, and thus achieving high yields.

                • From 3 m to 16 m working width
                • Tractors between 75 - 732 hp | 55 - 539 kW
                • Passive seedbed combinations
                • Optimum crumbling and reconsolidation
                • Even working depth
                • Perfect levelling
                • Safe road transport
            • Stubble Cultivation

            • Everything for stubble cultivation

              LEMKEN offers a wide product range of compact disc harrows and cultivators to enable the forward-looking farmer and contractor to implement a coordinated strategy of stubble cultivation and basic soil cultivation for mulch sowing, depending on the location, soil and prevailing crop rotation.

              In the process, implements with different tillage intensities, such as the Heliodor and Rubin compact disc harrows or the Koralin, Kristall and Karat cultivators, can be linked to form intelligent process chains. In this way, all crop production requirements can be optimally taken into account at low process costs.

              Targets of stubble cultivation

              • Creating germ conditions for volunteer seeds
              • Regulating the water balance of the soil
              • Straw management
              • Controlling weeds and animal pathogens (mice and snails)
              • Levelling the field
              • Incorporating lime and fertiliser (slurry, fermentation residues, manure, etc.)
                • Compact Disc Harrows - Heliodor 9

                • The Heliodor compact disc harrow can be used for shallow stubble cultivation on light and medium soils, and for seedbed preparation before mulch sowing, or after ploughing. This means the Heliodor can be used in both conventional and mulch sowing systems. High working speeds and a low power requirement give high-performance tillage.

                  • From 2 m to 16 m working width
                  • Tractors between 50 - 640 hp | 37 - 471 kW
                  • Working depth up to 12 cm
                  • Robust leaf spring
                  • Maintenance-free axial angular ball bearings
                  • Lightweight
                  • Combinable with the Solitair pneumatic seed drill
                  • Gigant system carrier
                • Compact Disc Harrows - Rubin 10

                • The Rubin compact disc harrow guarantees intensive, uniform mixing of organic matter and soil to a depth of approximately 14 cm, Its high weight guarantees penetration, even under hard conditions, and therefore reduces moisture loss from evaporation. This makes the Rubin highly suitable for shallow, reliable stubble cultivation at high working speeds.

                  • From 3 m to 7 m working width
                  • Tractors between 87 - 350 hp | 64 - 258 KW
                  • Working depth up to 14 cm
                  • Symmetrical arrangement of every row of serrated concave discs
                  • Middle discs are offset
                  • DuraMaxx discs
                  • An impact harrow and a levelling harrow
                  • Semi-mounted versions
                  • Support wheels
                  • Recoil cushioning
                • Compact Disc Harrows - Rubin 12

                • With Rubin 12, LEMKEN introduces a compact disc harrow that enables deeper cultivation comparable to a tined cultivator up to a depth of 20 cm. The Rubin 12 is suitable both for stubble cultivation and for primary soil tillage, even under the heaviest soil conditions.

                  • From 3 m to 7 m working width
                  • Tractors between 135 - 560 hp | 99 - 412 kW
                  • Working depth up to 20 cm
                  • Two rows of serrated concave discs
                  • Symmetrical arrangement of the discs
                  • Optimum penetration
                  • Cultivation over the whole width
                  • Specially curved and coiled legs
                  • An impact harrow and a levelling harrow
                  • Semi-mounted versions
                • Cultivators - Koralin 9

                • Agriculture is subject to continuous change and needs to adapt to new challenges all the time. The increasing drought affects soils, and water is becoming a more and more precious resource as a result. Therefore, the Koralin cultivator offers a versatile solution for the gentle cultivation of agricultural land. It protects your soil and you can look forward to a perfect result once the work is done.

                  • Combines disc harrow and tine elements
                  • Working depths from 2 - 12 cm across the while working width
                  • Working widths 6.60 and 8.40 m
                  • Combines the advantages of disc harrow and cultivator
                  • Ideal for entire surface shallow tillage
                  • Can be used without roller and with four-row harrow
                  • Enhances the water-holding capacity of the soil
                • Cultivators - Kristall 9

                • The Kristall cultivator combines the proven advantages of a twin-beam cultivator with the added benefits of a cultivator with three or more tine rows.

                  • From 3 m to 6 m working width
                  • Tractors between 90 - 270 Hp | 66 - 199 kW
                  • Twin-beam
                  • Shallow and medium-depth working in several operations
                  • Fit for mulch sowing
                  • Versatile soil cultivation
                  • Basic equipment with shear-off safety
                  • U-version with automatic maintenance-free overload protection
                • Cultivators - Karat 9

                • The Karat 9 intensive cultivator is suitable for initial shallow, all-over stubble cultivation after combining, as well as deep, intensive mixing to incorporate straw at a later date. The tractor-mounted Karat 9 has an easily accessible depth adjustment system to set working depth in small increments between 5 and 30 cm without using tools. The Karat 9 is available in mounted folding versions with 4 and 5 m working width. Rigid and semi-mounted three-beam cultivators can be found on the successor model Karat 10.

                  • From 4 m to 5 m working width
                  • Tractors between 140 - 300 Hp | 105 - 220 kW
                  • Triple-beam
                  • Innovative quick-change system
                  • Simple depth adjustment
                  • Non-Stop overload safety device
                • Cultivators - Karat 10

                • The new Karat 10 three-beam cultivator reveals its efficient design even at first glance: The tines are now arranged symmetrically about the towing axle, making the machine extremely low-draught and ensuring intensive mixing at the same time. This is particularly important when using the cultivator with track guidance systems.

                  • Working width from 3 to 7 m
                  • Tractors between 105-490 Hp | 75-360 kW
                  • 3 beams
                  • Extremely low-draught
                  • Ensures intensive mixing
                  • Lower traction requirements
                  • Symmetrically arranged tines about the towing axle
                  • Blockage-free working
                • Cultivators - Karat 12

                • LEMKEN has developed the Karat 12 for both shallow and deep tillage, also in heavy soils. Four rows of tines produce the desired loosening and mixing effect, depending on the share type used.

                  • From 4 m to 7 m working width
                  • Tractors between 180 - 595 Hp | 132 - 441 kW
                  • Quadruple-beam
                  • Innovative quick-change system
                  • Optimum levelling
                  • Centrally integrated transport axle
                  • Optimum weight distribution
                  • Non-Stop overload safety device
              • Sowing

              • Precise sowing technique that ensures yields

                LEMKEN's modern sowing technology combines optimum seed placement and high output. A wide range of combination options and good reconsolidation create the basis for a good harvest.

                What LEMKEN sowing technology provides

                • Mechanical and pneumatic seed drills
                • Drill combination with different tillage units
                • Working widths from 3 - 12 metres
                • Suitable for all tillage methods
                • Innovative precision seeding
                  • Drill Seeding

                  • Perfect sowing on all soils

                    Modern arable farms need high performance equipment, a versatile combination of different functions within an implement, and fast, simple road transport. And all this without compromise to good consolidation and perfect seed placement. The most important feature of a modern drill technology is that it will work flawlessly in both conventional and conservation tillage.

                    Sowing process

                    • Loosening and crumbling with power harrow or compact disc harrow
                    • Levelling
                    • Stripwise reconsolidation with the roller
                    • Seed placement with the double disch coulter
                    • Pressing in seeds with the depth control wheel
                      • Mechanical Seed Drills - Saphir 9

                      • The Saphir 9 impresses with outstanding operating comfort and easy handling. The combination of a reliable mechanical seeding shaft drive and large hopper volumes makes for high area outputs. As a result, the Saphir 9 is the perfect seed drill for small and medium-sized farms.

                        • Nominal hopper volume: 860 L
                        • Exclusively in 3 m

                        Advantages

                        • Proven dosing and placement system with double disc coulters with parallel suspension and depth control wheels for even germination rates.
                        • The Saphir 9 features the electronic EcoDrill control, which is operated via the LET-40 terminal with touch display.
                        • The star wheel, maintenance-free cardan drive and continuously variable oil bath transmission ensure accurate and easy metering of seeds. Seeding rates between 0.5 and 500 kg/ha can be precisely set. The smooth operation of the seeding shaft guarantees a precise longitudinal distribution of seeds.
                        • Improved comfort and greater safety due to redesigned access grille, loading bridge and handrail.
                      • Mechanical Seed Drills - Saphir 10

                      • The Saphir 10 offers a wide range of options for highly precise, accurate seeding. Thanks to the electric drive, the seeding rate can be adjusted from the comfort of the cab.

                        • Nominal hopper volume: 860 L
                        • Exclusively in 3 m
                        • ISOBUS compatible

                        Advantages

                        • The electric seeding shaft drive allows seeds to be precisely metered at seeding rates from 0.5 to 500 kg/ ha.
                        • ISOBUS and GPS technologies combined with an optional CCI 50, 800 or 1200 terminal, allow seeding maps to be processed easily.
                        • Proven dosing and placement system with double disc coulters with parallel suspension and depth control wheels for even germination rates.
                        • The redesigned seed hopper with volumes of up to 1,160 litres features a tightly closing plastic lid.
                        • Easier filling from big bags through the new hopper lid with extra wide opening.
                      • Pneumatic Seed Drills - Solitair 8+

                      • The updated Solitair 8+ is ideal for small and medium-sized farms that are looking for a cost-efficient way of using high-precision pneumatic seed drill technology for conventional and conservation tillage.

                        • Nominal hopper volume: 1 450 L
                        • From 3 m to 4 m working width

                        Advantages

                        • The mechanical drive of the metering system is maintenance-free. The star wheel runs within the seed drill working width and ensures a consistent drive. This in turn produces a precise longitudinal distribution of seeds for even germination rates.
                        • The Solitair 8+ features the electronic EcoDrill control, which is operated via the LET-40 terminal with touch display.
                        • Proven dosing and placement system with double disc coulters with parallel suspension and depth control wheels for even germination rates.
                        • Seeds are conveyed from the seed hopper, which holds up to 1,850 litres, by an extremely quiet blower fan with very low oil consumption.
                        • Folding access grille for improved access and easier dosing and calibration.
                        • The adjustable single harrow is easy to lift and to adjust to a wide range of different conditions.
                      • Pneumatic Seed Drills - Solitair 9+

                      • The Solitair 9+ pneumatic seed drill can be used as a rigid, semi-mounted version in various working widths. As it can be combined with various tillage implements or run in solo operation, it can be used in a wide range of applications and with various cultivation methods.

                        • Nominal hopper volume from 1 450 L to 1 850 L
                        • From 3 m to 4 m working width

                        Advantages

                        • Proven dosing and placement system with double disc coulters with parallel suspension and depth control wheels for even germination rates.
                        • New, modern tank with wide-opening plastic lid for easy filling from big bags.
                        • Particularly quiet, proven blower fan from the Solitair 25 with very low oil consumption.
                        • The integrated calibration sensor allows calibration testing to be performed right on the machine without needing to go to the tractor.
                        • Folding access grille for improved access and easier dosing and calibration.
                        • The adjustable single harrow is easy to lift and to adjust to a wide range of different conditions.
                      • Pneumatic Seed Drills - Solitair 9+ Duo

                      • The Solitair 9+ Duo pneumatic seed drill features a divided seed hopper and therefore offers multiple options for simultaneously applying seeds, fertiliser or even interseeds.

                        • Nominal hopper volume: 1 850 L
                        • From 3 m to 4 m working width
                      • Pneumatic Seed Drills - Solitair 9

                      • The Solitair 9 pneumatic seed drill is available as a folding or semi-mounted folding version in working widths of 3 to 6 metres. The potential for solo use, or in combination with a wide range of tillage implements, creates a versatile machine that can be used in a number of establishment situations.

                        • Nominal hopper volume from 1 850 L to 2 300 L
                        • From 4 m to 6 m working width

                        Advantages

                        • The 6 cell wheels in the central metering unit can be easily adjusted using the tool provided, Seeding rates of 1,5 to 300 kg/ha, over a range of seed types, are possible.
                        • The Solitronic system takes care of all the control and monitoring functions for the electric seeding shaft drive. The easy-to-read colour display provides simple operator guidance.
                        • The seed distributors are located outside the seed hopper, immediately above the coulter bar. The seed tubes between the distributor and the coulter are as short as possible and all the same length to give accurate seed distribution.
                        • The parallelogram-mounted double disc coulters with rubber-tyred depth wheels place the seed accurately at a uniform depth even in variable soils. Depth control is maintained even at high forward speeds.
                      • Pneumatic Seed Drills - Solitair 12

                      • With Solitair 12, LEMKEN offers trailed pneumatic seed drills in working widths of 8 to 12 metres for maximum field performance and cost-effectiveness.

                        • Nominal hopper volume: 5 800 L
                        • From 8 m to 12 m working width

                        Advantages

                        • The large, 5,800 litre seed hopper allows work for long periods without interruption and minimises downtime.
                        • The large volume tyres protect the soil and make transport safe.
                        • The seeding shafts in the metering unit are driven by a high-performance electric motor and controlled electronically. The metering devices provide uniform seed flow and good lateral distribution.
                        • The coulter bar of the Solitair 12 is in two parts. An innovative hydraulic system provides the ground following that is particularly important with large working widths. Mounted on four hydraulic cylinders, coulter sections can float independently of the main folding parts of the drill.
                      • Pneumatic Seed Drills - Solitair 23+

                      • The Solitair 23+ front tank can be used for sowing or fertilising and can be combined with various LEMKEN seed drills such as the Azurit precision planter for fertilising or the Optidisc 25 coulter bar for sowing.

                        • Nominal hopper volume from: 1 900 L
                        • Seeding or fertilising
                        • ISOBUS

                        Advantages

                        • It can be used for under-root fertilisation with the Azurit precision seed drill or combined with the OptiDisc 25 coulter bar as a seed hopper.
                        • The Solitair 23+ is designed as an injector tank. It can optionally be fitted with a pressure system to ensure that seeds or fertiliser are dosed reliably at rates of up to 500 kg per hectare even across long conveyor distances and at high forward speeds.
                        • Its management is based on the LEMKEN MegaDrill operating system. This can be configured from an ISOBUS terminal to manage seeding and fertilisation in the most efficient way possible to help you reduce costs and maximise profitability.
                        • Electrical width section control avoids overlap and thus saves costs for fertiliser and seeds.
                        • In keeping with the design of the entire product family, the plastic Solitair 23+ tank has a low profile, despite its large capacity of 1 900 litres, to ensure good visibility.
                        • The Solitair 23+ can optionally be equipped with a front tyre packer or modular case weights.
                      • Pneumatic Seed Drills - Solitair 25 KA

                      • The Solitair 25 KA pneumatic seed drill has been specially developed to work in a wide variety of conditions. The implement can be combined with a range of different tillage implements and coulter bars for maximum utilisation.

                        • Nominal hopper volume: 3 000 L
                        • From 4 m to 6 m working width

                        Advantages

                        • With a newly developed metering and distribution system, the Solitair 25 KA can be used as both a seed hopper and a fertiliser, which opens up a wide variety of applications.
                        • Four electrically operated metering units deliver precise application rates between 0.5 and 500 kg/ha, as seeds flow continuously and evenly at all times due to a fine balance between chamber volume and speed of rotation.
                        • The new blower fan has a stainless steel wheel and an aluminium housing which is integrated in the tank. This generates an adequate volume of air while keeping noise levels low.
                        • The implement is optionally available with a weighing unit and filling auger to help refilling and shorten waiting times.
                        • The parallelogram-guided double disc coulter system with depth control roller is available in a mechanical version (up to 45 kg coulter pressure) and a hydraulic version (up to 70 kg coulter pressure).
                      • Pneumatic Seed Drills - OptiDisc 25

                      • The LEMKEN OptiDisc 25 solo coulter bar now provides farmers with yet another sowing option. The coulter bar can be combined with the Solitair 23+ front tank and a rotary harrow to form an agile, compact drilling combination with optimal weight distribution, even when working with a smaller tractor.

                        • From 3 m to 6 m working width

                        Advantages

                        • The proven OptiDisc double disc coulter with parallel guidance allows the seed depth and coulter pressure to be adjusted independently to ensure that seeds are always placed at precisely the correct depth.
                        • The coulter pressure in the new coulter bar can be adjusted either mechanically (to up to 45 kg) or hydraulically from the tractor cab (to up to 70 kg).
                        • Uniform transverse distribution even with tramlines, as the distributor is directly above the coulter bar and the tramline mechanism does not require a seed return.
                        • To ensure safe road travel, all drill combinations with a 4.5 m working width or above are supplied with an additional carriage. The carriage can be locked and unlocked manually from the left side of the machine in just a few steps. Up to 3.5 t of the weight of the drill combination can be transferred to the additional carriage. This ensures that neither the permissible rear axle load nor the permissible total weight of the tractor are exceeded. The carriage support wheels follow the track reliably even when cornering.
                      • Drill Combinations - Solitair DT

                      • Incredibly easy to tow, integrated compact disc harrow, comfortable operation and a large, optionally divided seed hopper – that is LEMKEN’s new Solitair DT seed drill, available in working widths of 4 and 6 metres.

                        Greatest possible efficiency with maximum precision – these were the maxims set for designing the Solitair DT. The result is a drill combination with truly impressive performance: lighter, more efficient, better.

                        • Working width from 4 m to 6 m
                        • Container volume from 3,400 L to 5,100 L
                        • Transport speed up to 40 km/h
                      • Drill Combinations - Compact-Solitair 9 H

                      • High performance is becoming ever more important when sowing with modern drills - with no compromises, good reconsolidation, and perfect seed placement. The drill combination must also be versatile for use in mulch drilling and conventional ploughing and drilling.

                        • Nominal hopper volume from 3 500 L to 4 500 L
                        • From 3 m to 6 m working width
                        • Tractors between 120 - 300 Hp | 88 - 221 kW

                        Advantages

                        • The big seed hopper is easy to fill and meets all the requirements for high performance.
                        • The depth of the cultivation section, with two rows of notched hollow discs, can be adjusted hydraulically.
                        • The spring-loaded levelling tines are essential for levelling ploughed land. The large volume, AS profile, tyre packer reduces the draft requirement and provides good reconsolidation and safe road transport.
                        • The maintenance-free OptiDisc double disc coulters with rubber-tyred depth control wheels prevent blockages and provide uniform seed placement and ideal depth control even at high forward speeds.
                      • Drill Combinations - Compact-Solitair 9 HD

                      • With summer cereals in regions with brief vegetation periods, in particular, significant increases in profits can be realised with drill combinations that place grain and fertiliser simultaneously. In both conventional and minimum tillage cultivation, a speedy seedling development is achieved.

                        • Nominal hopper volume from 3 500 L to 5 000 L
                        • From 4 m to 6 m working width
                        • Tractors between 140 - 300 Hp | 103 - 221 kW

                        Advantages

                        • The two-part, variable hopper can be used for both seed and fertiliser.
                        • Heliodor compact disc harrow tools are used for seedbed preparation.
                        • 400 mm diameter double disc coulters place fertiliser, behind the cultivation section, and allow depth to be adjusted independently of other parts of the machine. Their coulter pressure can be increased to a maximum of 200 kilogram.
                        • The large tyre packer wheels guarantee optimum reconsolidation of the seedbed.
                        • The low-maintenance OptiDisc double disc coulters, with depth control wheel and row distance of 167 mm, guarantee exact seed delivery with uniform seed depth.
                        • The arrangement of the tools, and the delivery of the fertiliser between the seed rows, ensure that all the plants receive an optimum amount of fertiliser while also helping to reliably avoid any cauterisation of the plant roots - thereby providing the ideal conditions for speedy growth.
                        • Easy operation of all functions with the Solitronic machine control vial the LEMKEN graphic terminal LVT 50 or an ISOBUS terminal (option).
                        • An integrated trapeze packer roller for the pre-reconsolidation of the seed rows is available.
                      • Drill Combinations - Compact-Solitair 9 Z & KK

                      • For efficient seeding in varying conditions LEMKEN offers the CompactSolitair drill combination combined with the Zirkon power harrow.

                        • Nominal hopper volume from 3 500 L to 4 500 L
                        • From 3 m to 6 m working width
                        • Tractors between 120 - 315 Hp | 88 - 232 kW

                        Advantages

                        • Soil cultivation can be optimised due to indiviual adaptation of working parameters such as working depth, rotor speed, tine position and driving speed.
                        • The power harrow creates an optimum seedbed, both in conventional as well as in minimum tillage methods, whatever the soil conditions.
                        • The tyre packer roller ensures precise power harrow depth guidance.
                        • Due to a standardised rear threepoint linkage the coulter bar can be removed and replaced by a precision drill for maize. When sowing maize, the Compact-Solitair hopper is used as a fertiliser hopper. The drill combination can be fully utilised, which in turn makes it particularly interesting for biogas operation.
                        • The Compact-Solitair is available in three, four and six metres working width.
                    • Precision Seeding

                    • Innovative precision seeding technology

                      With the Azurit, LEMKEN has set standards in precision seeding. The staggered placement of the grains in the DeltaRow triangle provides the plants with more nutrients, more water and more light. With this advantage for the plant, a higher yield can be achieved with the same crop density. The DeltaRow method also enables tramlining with a constant number of plants.

                      The precision air seeder Azurit 10 uses the innovative DeltaRow method for sowing. After clearing the seed furrow, mineral fertiliser is placed centrally underneath the DeltaRow via a double disc coulter. After pre-consolidation of the seed rows, double disc coulters place the seed in the soil. As an alternative to underfoot fertilisation, the MicroHub micro granule unit is also available.

                      Precision seeding with the DeltaRow

                      The Azurit 10 features the innovative precision seeding technology in the DeltaRow method. The optimised space distribution of the plants ensures a better use of resources and thus leads to higher yields.

                      The advantages of the precision drill:

                      • Optimal utilisation of under-root fertiliser
                      • More nutrients, water and light for each plant
                      • Rapid soil cover during juvenile development
                      • Plant spacing helps prevent erosion
                      • Greater weed suppression capacity in juvenile development
                      • Better root growth and biomass development
                        • Intercrop Seeding

                        • Sowing catch crops

                          For most farmers, sowing catch crops directly as they cultivate their stubble is the easiest approach, as it avoids an additional pass and reduces working time, effort and costs. This is why LEMKEN now offers a combined pneumatic intercrop seeder for its cultivators and compact disc harrows. This allows farmers to utilise the optimal time for sowing and benefit from immediate erosion protection.

                              • SeedHub 5

                              • With its SeedHub, LEMKEN offers a catch crop seed drill that can be combined with various tillage implements. This allows catch crops to be sown during stubble cultivation to save working time and costs.

                                • Nominal hopper volume: 200 L or 500 L.
                                • Blower fan and baffle plates for precise sowing in each width section even in strong winds.
                                • Comfortable monitoring of speed and fan speed from the operating terminal.
                                • Ability to adjust the seeding rate electronically from the tractor cab while sowing.
                                • A calibration button on the seed hopper allows the calibration to be performed comfortably on the implement.
                                • Two dosing shafts as standard for consistently correct seeding rates.
                                • The SeedHub is available with tank volumes of 200 and 500 litres.
                          • CropCare

                          • For the health of the plant

                            LEMKEN takes the term Crop Care literally, because it is about protecting and caring for the crops and giving them everything they need to thrive. At the same time, the environment should be protected and the use of pesticides and fertilisers should be as precise as possible and reduced to a minimum.

                              • Fertilisation Technology

                              • Minimise losses, increase performance!

                                Fertilisation accounts for about one third of the operating costs of an arable farm. This makes the technology used all the more important, so that losses can be minimised and output and precision can be increased. The six fertiliser spreader models in three performance classes make your work easy and help you achieve your goals.

                                  • Spica

                                  • The LEMKEN SPICA 8 fertiliser spreader combines easy handling with high operator comfort. Straightforward attachment, loss-free filling and secure adjustment ensure a rapid, effective deployment on the field.

                                    • Nominal hopper volume from 900 L to 2 100 L
                                    • From 9 m to 24 m working width

                                    Advantages

                                    • Seed hopper with a volume of 800 to 2,100 litres. 24 m working width.
                                    • Oscillating agitator for an even, gentle flow of granules.
                                    • Two funnel outlets with angled gates for an even flow of fertiliser.
                                    • ECOBORD border spreader system.
                                    • Mobile feeder chute for comfortable calibration testing and easy drainage.
                                    • Electrical TRIBORD 2D border spreader for comfortable switching between full working width and border spreading from the cab (optional).
                                  • Tauri

                                  • With its larger tank and longer spreading distances, the TAURI fertiliser spreader is particularly well suited for use in mixed and livestock farming businesses. The automatic weighing system (Tauri 12) provides for even application and ensures the efficient use of fertiliser.

                                    • Nominal hopper volume from 1 500 L to 3 000 L
                                    • From 12 m to 36 m working width

                                    Advantages

                                    • Seed hopper with a volume of 1,500 to 3,000 litres. 36 m working width.
                                    • The continuously operating automatic weighing system ensures that fertiliser is applied evenly and therefore reduces application losses by up to 10 percent (Tauri 12).
                                    • The inclination sensor, which comes as standard, effectively adjusts for measurement errors when spreading on slopes.
                                    • ISOBUS preparation for the optional use of a LEMKEN CCI terminal or ISOBUS terminal (Tauri 12).
                                    • Four-stage, GPS-based section control (only Tauri 12).
                                    • High-quality, durable tank lid to keep fertiliser reliably dry (optional).
                                    • Two funnel outlets with angled gates for an even flow of fertiliser.
                                    • ECOBORD border spreader system.
                                  • Polaris

                                  • The POLARIS fertiliser spreader features a comprehensive range of smart features such as intelligent electronic assistance systems for maximal spreading precision and flexibility. Its variable tank sizes and full ability to control all systems from the comfort of the cab ensure maximum operator comfort. The Polaris delivers ultimate efficacy with superior efficiency on large fields.

                                    • Nominal hopper volume from 1 900 L to 4 000 L
                                    • From 18 m to 50 m working width

                                    Advantages

                                    • Seed hopper with a volume of 1,900 to 4,000 litres. From 18 to 50 m working width.
                                    • EPSILON double spreader vanes with two fertiliser streams, one above the other, for an even spreading pattern.
                                    • The GPS-based automatic ECONOV section control system prevents over- or under-fertilisation of individual width sections in the field (e.g. at the headland) and thus allows fertiliser savings of up to 6 percent.
                                    • ECONOV supports the independent control of up to 12 width sections (Polaris 14) and, in combination with a DGPS signal and ISOBUS control (optional), the high-precision implementation of application maps.
                                    • Continuously operating weighing system with inclination sensor for adjusting for measurement errors on slopes.
                                    • Oscillating agitator with two funnel outlets with angled gates for an even, gentle flow of fertiliser.
                                    • SpeedControl automatic spread pattern adjustment depending on the travel speed enables an optimal distribution of the fertilizer (optional).
                                • Weed control

                                • Do you want a clean field?

                                  Every field and every crop is different, including the weeds that compete with our arable crops for light, water and nutrients. Efficient weed control is essential for highest crop quality and safe yields.

                                    • Mechanical Weed Control - EC-Weeder

                                    • The EC-Weeder is suitable for all crops seeded in rows.

                                      • Fully customizable hoeing machine
                                      • Easy-to-use, low maintance and high quality
                                      • Optional IC-Light camera steering system
                                      • Individually adapted row widths from 15 to 150 cm
                                      • Individually adapted working widths up to 17 m
                                      • 70 cm passage height
                                    • Mechanical Weed Control - EC-Steer

                                    • The EC-Steer parallel steering frame makes controlling your hoeing machine a breeze. Whether you have a third-party machine or an EC-Weeder – EC-Steer allows you to upgrade any hoeing machine with a steering system controlled via an in-cab joystick or with the IC-Light camera control. This is particularly advantageous if you want to use hoeing machines for various row widths with a single steering system.

                                      • Parallel sliding frame for every hoeing machine
                                      • Control manually via seat and joystick or automatically with the camera control IC-Light
                                      • No transfer of movement between the tractor and steering frame when driving with open lower link stabilisers
                                      • Hoeing machine swivel range of up to 20 cm to the right and left
                                      • IC-Light camera control or manual control via an in-cab joystick
                                      • Optional short linkage connection for an optimised centre of gravity
                                    • Mechanical Weed Control - EC-Ridger

                                    • The EC-Ridger is suitable for all crops grown on ridges with 75 cm row distance, like potatoes and carrots, also in later growing stages.

                                      • Hoeing and earthing up machine for ridges, while protecting the crop
                                      • Hoeing and earthing up machine for ridges, while protecting the crop
                                      • Easy to use, low maintance and high quality
                                      • Working width up to 6 m
                                      • Driving speed up to 8 km/h
                                      • Row distance 75 cm
                                      • Automatic & manual steering systems

                                      The working principle of the EC-Ridger consists of three to five steps:

                                      • Optionally, the subsoiler cultivates the soil between the ridges.
                                      • Then the hoeing discs cut the weeds from the sides of the ridge and the spring tines loosen the soil between the ridges.
                                      • At the end of the process, the earthing-up rebuilds the ridge back into its shape.
                                    • Mechanical Weed Control - IC-Weeder

                                      • Automatic intra-row hoeing machine for vegetables
                                      • Single plant recognition due to camera images
                                      • Active hoeing knifes move between the plants in one row
                                      • Row width minimum 25 cm
                                      • Plant distance minimum 20 cm
                                      • Working width up to 6 m
                                      • Driving speed up to 4 km/h
                                      • Weeding up to 2 cm close to the crop
                                      • Detection of green hues and the RGB-colour spectrum
                                      • Remote service for direct support
                                    • Mechanical Weed Control - IC-Weeder AI

                                    • What characterizes the IC-Weeder AI

                                      • FARM MACHINE 2022 in the category "Mechanical Weed Control"
                                      • Automatic intra-row hoeing machine also for sown crops
                                      • Single plant recognition based on artificial intelligence (AI)
                                      • Reliable detection even under unfavourable conditions
                                      • Active hoeing knifes move between the plants in one row
                                      • Easy-to-use and intuitive operation
                                    • Chemical Weed Control - EC-Spray

                                    • The EC-SprayHood is suitable for crop rows on the flat field. The herbicide is sprayed inside the hood, therefore it is placed inter-row, so between the rows to kill weeds and volunteer plants.

                                      • Row application between and on the crop rows
                                      • Saves up to 80% of herbicides and fungicides
                                      • Less growth depression of the crops thanks to direct application on the weeds
                                  • Camera Technology

                                  • You want to work without fatigue?

                                    The Intelligent Camera Concept (IC) automates row guidance and plant detection. The handling and operation of the IC technology is very intuitive and simple. And if you need additional help, you can get direct support in the field via remote maintenance.

                                        • IC-Light

                                        • The IC-Light system contains three key components: The camera, the terminal including job computer and the parallel sliding frame. Together they form a precise automatical steering system for your EC-Weeder or EC-Steer to create space to grow for your crops.

                                          • Detection between 1 and 5 crop rows
                                          • Detection of green hues and the RGB-colour spectrum including autolearning-function
                                          • Weeding 2 cm close to the crop
                                          • Driving speed up to 15 km/h
                                          • Remote service for direct support
                                    • Application Technology for Liquids

                                    • Precise application technology for optimum crop management

                                      Modern crop production combined in one operation. With the flexible use of the front tank and application technology, measures can be optimally adapted to the needs of the crop.

                                        • Front Tank SprayHub

                                        • Band spraying in row crops for herbicide reduction No matter whether herbicide, fungicide or insecticide measures or the application of micronutrients up to liquid fertilisers - the Fronttank SprayHub offers the most flexible combination possibilities and has all the features known from a modern crop protection sprayer.

                                          Advantages

                                          • Saves 40 to 60 % pesticides
                                          • Versatile combinable

                                          Features

                                          • Filling screen in the tank, optionally with an induction nozzle for liquid and solid products
                                          • Hydraulically driven piston diaphragm pump, flow rate of 140 l / min
                                          • Two rotating interior cleaning nozzles for easy cleaning
                                          • CTS connection for contactless induction (optional)
                                          • Greater ballast with additional weight plates (330 kg or 660 kg)
                                          • Tank volume of 1,100 or 1,500 litres with adjustable agitator
                                          • Operation of the water hydraulics with optional manual or electric control
                                          • Clean water tank with 127 litres capacity
                                        • Band Sprayer - SprayKit for EC-Weeder

                                        • The LEMKEN SprayKit allows you to apply liquid fertilisers, crop care products and other liquids. The compact application unit is suitable for installation on any attachment. Various features such as the mechanical width section control and the water hydraulics make the SprayKit a highly efficient tool.

                                          The best solution from a single source: with the SprayKit, LEMKEN turns the Steketee EC-Weeder into a highly efficient hoeing machine with a band sprayer. In this combination, the SprayKit is available in different variants.