Navigation : EXPO21XX > AUTOMATION 21XX > H20: Control Equipment > Zaber Technologies
Videos
Loading the player ...
  • Offer Profile
  • Zaber's extensive line of computer controlled motorized linear slides, miniature linear actuators, motorized rotary stages, motorized mirror mounts, goniometers and other devices, make automating sub-micron positioning applications quick, easy, and affordable.

    Zaber's motorized linear slides, linear actuators and other products are easier to set up than competing devices. Multiple linear actuator or linear slide devices, as well as rotation stages, mirror mounts, and/or stepper motor controllers can be daisy-chained tao a single serial or USB port on any computer. No additional hardware or motor controllers are required.

    See how easy it is to install a Zaber linear actuator.

    This setup facilitates a low entry-level cost without sacrificing expandability. For example, you may purchase a single motorized linear slide to automate one axis of your application, then add additional linear actuators, linear slides, rotation stages, mirror mounts, stepper motors, etc to automate more axes as your time and budget permits.
Product Portfolio
  • Linear Actuators

      • Motorized with Built-in Controllers and Motor Encoders

          • X-NA-E Series

          • Micro linear actuators with built-in controllers and motor encoders

            25 and 50 mm travel
            Up to 30 mm/s speed and up to 25 N thrust
            Built-in controller; daisy-chains with other Zaber products
            Built-in, 250 CPR, motor encoder provides slip/stall detection and recovery
            Designed to replace standard micrometer heads on manual translation stages
            Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
          • A-BAR-E Series

          • Closed-loop motorized electric cylinders with built-in stepper motors, motor encoders, and controllers

            200 or 300 mm travel
            540 N peak thrust
            Up to 65 mm/s speed
            Ball screw driven
            Inline and parallel drive configurations
            Encoder position feedback with slip/stall detection and automatic recovery
            Built-in controller; daisy chains with other A-Series and T-Series products
          • A-LAR-E Series

          • Closed-loop motorized electric cylinders with built-in stepper motors, motor encoders, and controllers

            200 or 300 mm travel
            540 N peak thrust
            Up to 40 mm/s speed
            Lead screw driven
            Inline and parallel drive configurations
            Encoder position feedback with slip/stall detection and automatic recovery
            Built-in controller; daisy-chains with other A-Series and T-Series products
        • Motorized with Built-in Controllers

            • X-NA Series

            • Micro linear actuators with built-in controllers

              25 and 50 mm travel
              Up to 30 mm/s speed and up to 25 N thrust
              Built-in controller; daisy-chains with other Zaber products
              Designed to replace standard micrometer heads on manual translation stages
              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
            • A-LAR Series

            • Motorized electric cylinders with built-in stepper motors and controllers

              200 or 300 mm travel
              540 N peak thrust
              Up to 40 mm/s speed
              Lead screw driven
              Inline and parallel drive configurations
              Built-in controller; daisy chains with other A-Series and T-Series products
            • A-BAR Series

            • Motorized electric cylinders with built-in stepper motors and controllers

              200 or 300 mm travel
              540 N peak thrust
              Up to 65 mm/s speed
              Ball screw driven
              Inline and parallel drive configurations
              Built-in controller; daisy chains with other A-Series and T-Series products
            • T-NA Series

            • Micro linear actuators with built-in controllers

              25 and 50 mm travel
              Up to 8 mm/s speed and up to 50 N thrust
              Our most compact, precise and robust actuators with built-in controllers
              Built-in controller; daisy-chains data and power with other T-Series products
              Designed to replace standard micrometer heads on manual translation stages
              Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
              Custom versions available
            • T-LA Series

            • Miniature linear actuators with built-in controllers

              13, 28 and 60 mm travel
              Up to 4 mm/s speed and up to 15 N thrust
              Built-in controller; daisy-chains data and power with other T-series products
              Designed to replace standard micrometer heads on manual translation stages. (See note #2 below)
          • Motorized with Built-in Motor Encoders

              • LAR-E Series

              • Closed-loop motorized electric cylinders with built-in motor encoders

                200 or 300 mm travel
                540 N peak thrust
                Up to 40 mm/s speed
                Precision lead screw driven
                Inline and parallel drive configurations
                Encoder position feedback with slip/stall detection and automatic recovery
                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
              • BAR-E Series

              • Closed-loop motorized electric cylinders with built-in motor encoders

                200 or 300 mm travel
                540 N peak thrust
                Up to 65 mm/s speed
                Ball screw driven
                Inline and parallel drive configurations
                Encoder position feedback with slip/stall detection and automatic recovery
                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
            • Motorized

                • LAR Series

                • Motorized electric cylinders
                  200 or 300 mm travel
                  540 N peak thrust
                  Up to 40 mm/s speed
                  Precision lead screw driven
                  Inline and parallel drive configurations
                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                • BAR Series

                • Motorized electric cylinders
                  200 or 300 mm travel
                  540 N peak thrust
                  Up to 65 mm/s speed
                  Ball screw driven
                  Inline and parallel drive configurations
                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                • LAC Series

                • Compact motorized linear actuators
                  Compact size: great for applications with limited space
                  10 mm travel
                  Resolution down to 0.024 µm
                  Multiple tip options included
                  Designed for use with an X-MCB1 controller or any 2-phase stepper motor controller
                • NA Series

                • Electric linear actuators
                  16, 30, and 60 mm travel
                  Available in several sizes for a variety of thrusts and speeds
                  Designed for use with our X-MCB1 controller or any 2-phase stepper motor controller
                  Threaded tip for multiple mounting options
                  Custom versions available
              • Linear Stages

                  • Motorized with Built-in Controllers and Linear Encoders

                      • X-LDQ-AE Series

                      • High speed, precision linear motor stages with built-in controllers

                        Minimum incremental move of 50 nm
                        Integrated linear encoder provides high accuracy closed loop servo positioning
                        Up to 1.5 m/s speed and up to 2 g acceleration
                        75, 150, 300, 450, 600 and 1000 mm travel
                        Up to 2.5 µm accuracy over 1000 mm travel
                        Built-in controller; daisy-chains with other Zaber products
                        Zero backlash
                        One digital input and two digital outputs
                        Technical Article - Linear Motors: Overview and Selection Process
                      • X-LDM-AE Series

                      • Ultra precision linear motor stages with built-in controllers

                        High repeatability (80 nm) and accuracy (1 µm), with 25 nm minimum incremental move
                        Direct position measurement from 1 nm resolution linear encoder
                        Up to 1.2 m/s speed and up to 3.5 g acceleration
                        60, 110, 210 mm travel options
                        Built-in controller; daisy-chains with other Zaber products
                        Non-contact ironless linear motor for ultra precision, high dynamics and zero backlash
                        One digital input and two digital outputs
                        Mounts directly in XY
                        Technical Article - Linear Motors: Overview and Selection Process
                      • X-LDA-AE Series

                      • Miniature linear motor stages with built-in controllers

                        High repeatability (200 nm) and accuracy (1 µm), with 20 nm minimum incremental move
                        Direct position measurement from 1 nm resolution linear encoder
                        Up to 0.8 m/s speed and up to 4 g acceleration
                        25, 75, 150 mm travel options
                        Built-in controller; daisy-chains with other Zaber products
                        Non-contact ironless linear motor for high precision, high dynamics & zero backlash
                        One digital input and two digital outputs
                        Mounts directly in XY
                        Technical Article - Linear Motors: Overview and Selection Process
                      • X-LRT-AEC Series

                      • High-load, high accuracy linear stages with built-in controllers, linear encoders, and dust covers

                        100, 250, 500, 750, 1000 mm travel
                        20 µm full travel accuracy
                        300 kg load capacity
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Ball screw and lead screw configurations
                        Includes stainless steel dust covers
                      • X-LRQ-DEC Series

                      • High precision stages with built-in controllers and linear encoders and dust covers

                        75, 150, 300, 450, 600 mm travel
                        Up to 13 µm accuracy over 600 mm travel
                        100 kg load capacity
                        Up to 205 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Includes stainless steel dust cover
                        Custom versions available
                      • X-LRQ-DE Series

                      • High precision stages with built-in controllers and linear encoders

                        75, 150, 300, 450, 600 mm travel
                        Up to 13 µm accuracy over 600 mm travel
                        100 kg load capacity
                        Up to 205 mm/s speed and up to 300 N thrust
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        Inline and parallel drive configurations
                        Ball screw and lead screw configurations
                        Custom versions available
                      • X-LRM-DE Series

                      • Miniature, steel, motorized linear stages with built-in controllers and linear encoders
                        Hardened steel construction and recirculating ball bearing guide provide exceptional stiffness and thermal stability
                        100, 150, 200 mm travel
                        Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                        15 µm accuracy over 200 mm
                        50 kg load capacity
                        Built-in controller, daisy chains with other Zaber products
                      • X-DMQ-DE Series

                      • Direct Drive Linear Stages with Built-in Controllers and Linear Encoders

                        2.2 µm accuracy; < 0.5 µm repeatability
                        12 mm travel and 15.5 N peak thrust with adjustable force control mode
                        Up to 1400 mm/s speed, 25 Hz full-travel
                        Built-in controller; daisy-chains with other Zaber products
                        Integrated 200 nm resolution linear encoder provides closed-loop, high precision position control
                        Technical Article - Linear Motors: Overview and Selection Process
                    • Motorized with Built-in Controllers and Motor Encoders

                        • X-LRT-EC Series

                        • High-load, closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
                          100, 250, 500, 750, 1000, 1500 mm travel
                          500 kg load capacity
                          High cantilever stiffness
                          Up to 700 mm/s speed and up to 1200 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                          Ball screw and lead screw configurations
                          Includes stainless steel dust covers
                        • X-LRQ-EC Series

                        • Closed-loop stages with built-in stepper motors, motor encoders, controllers, and dust covers
                          75, 150, 300, 450, 600 mm travel
                          100 kg load capacity
                          Up to 840 mm/s speed and up to 300 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Inline and parallel drive configurations
                          Ball screw and lead screw configurations
                          Includes stainless steel dust cover
                          Custom versions available
                        • X-LRQ-E Series

                        • Closed-loop stages with built-in stepper motors, motor encoders, and controllers

                          75, 150, 300, 450, 600 mm travel
                          100 kg load capacity
                          Up to 840 mm/s speed and up to 300 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Inline and parallel drive configurations
                          Ball screw and lead screw configurations
                          Custom versions available
                        • X-LSQ-E Series

                        • Closed-loop stages with built-in stepper motors, motor encoders, and controllers

                          75, 150, 300, 450 and 600 mm travel
                          20 kg load capacity
                          Up to 1 m/s speed and up to 100 N thrust
                          Encoder position feedback with slip/stall detection and automatic recovery
                          Built-in controller; daisy-chains with any other Zaber products
                          Custom versions available
                        • X-BLQ-E Series

                        • Closed-loop, belt-driven linear stages with built-in stepper motors, motor encoders, and controllers

                          70, 145, 295, 445, 595, 1045, 1495, 2095, 3000 mm travel
                          Up to 2.0 m/s speed, 20 N thrust, and 20 kg load capacity
                          Encoder position feedback with slip/stall detection and automatic recovery
                          Built-in controller; daisy-chains with any other Zaber products
                        • X-LRM-E Series

                        • Miniature, steel, motorized linear stages with built-in controllers and motor encoders
                          Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                          25, 50, 100, 150, 200 mm travel
                          Motor encoder position feedback with slip/stall detection and automatic recovery
                          Up to 8 µm accuracy and 50 nm resolution
                          50 kg load capacity
                          Built-in controller, daisy-chains with other Zaber products
                        • X-LSM-E Series

                        • Miniature motorized linear stages with built-in motor encoder and controllers
                          25, 50, 100, 150, 200 mm travel
                          10 kg load capacity
                          Up to 104 mm/s speed and up to 55 N thrust
                          Built-in controller; daisy-chains with other Zaber products
                          Integrated, 200 CPR, motor mounted encoder provides slip/stall detection and recovery
                          Custom versions available
                        • X-LHM-E Series

                        • Motorized linear stages with built-in controllers and motor encoders

                          25, 50, 100, 150, 200 mm travel
                          3 kg load capacity
                          Up to 65 mm/s speed and up to 25 N thrust
                          Our most affordable linear stage with built-in controller and motor encoder
                          Daisy-chains with other Zaber products
                      • Motorized with Built-in Controllers

                          • X-LRT-C Series

                          • High-load, motorized linear stages with built-in controllers and dust covers
                            100, 250, 500, 750, 1000, 1500 mm travel
                            500 kg load capacity
                            High cantilever stiffness
                            Up to 700 mm/s speed and up to 1200 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Ball screw and lead screw configurations
                            Includes stainless steel dust covers
                          • X-LSQ Series

                          • Motorized linear stages with built-in controllers

                            75, 150, 300, 450 and 600 mm travel
                            20 kg load capacity
                            Up to 1 m/s speed and up to 100 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Custom versions available
                          • X-LRM Series

                          • Miniature, steel, motorized linear stages with built-in controllers

                            Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                            25, 50, 100, 150, 200 mm travel options
                            Up to 8 µm accuracy and 50 nm resolution
                            50 kg load capacity
                            Built-in controller, daisy-chains with other Zaber products
                          • X-LSM Series

                          • Miniature motorized linear stages with built-in controllers
                            25, 50, 100, 150 and 200 mm travel
                            10 kg load capacity
                            Up to 104 mm/s speed and up to 55 N thrust
                            Built-in controller; daisy-chains with other Zaber products
                            Custom versions available
                          • X-LHM Series

                          • Motorized linear stages with built-in controllers
                            25, 50, 100, 150, 200 mm travel options
                            3 kg load capacity
                            Up to 65 mm/s speed and up to 25 N thrust
                            Our most affordable linear stage with built-in controller
                            Daisy-chains with other Zaber products
                          • T-LSR Series

                          • Motorized linear slides with built-in controllers

                            75, 150, 300 and 450 mm travel
                            20 kg load capacity
                            Up to 76 mm/s speed and up to 100 N thrust
                            Built-in controller; daisy-chains data and power with other T-Series products
                            Custom versions available
                          • T-LS Series

                          • Motorized linear stages with built-in controllers
                            13 and 28 mm travel
                            10 kg load capacity
                            Up to 6.5 mm/s speed and up to 15 N thrust
                            Built-in controller; daisy-chains data and power with other T-Series products
                            The stage top can deflect up to 0.5 mm away from the motor under a force of 15 N. When the load is released, the stage top springs back to its original position. Consider this when pulling forces such as lifting a weight in a vertical configuration with the motor end facing upward. This isn't a factor in most horizontal applications.
                            It is more delicate, less accurate, and has lower performance specifications than the X-LSM.
                        • Motorized with Built-in Linear Encoders

                            • LRQ-DEC Series

                            • High precision linear stages with built-in linear encoders and dust covers

                              75, 150, 300, 450, 600 mm travel
                              Up to 13 µm accuracy over 600 mm travel
                              100 kg load capacity
                              Up to 205 mm/s speed and up to 300 N thrust
                              Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                              Inline and parallel drive configurations
                              Ball screw and lead screw configurations
                              Includes stainless steel dust cover
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available
                            • LRQ-DE Series

                            • High precision linear stages with built-in linear encoders
                              75, 150, 300, 450, 600 mm travel
                              Up to 13 µm accuracy over 600 mm travel
                              100 kg load capacity
                              Up to 205 mm/s speed and up to 300 N thrust
                              Integrated linear encoders with 50 nm resolution provide slip/stall detection and position correction
                              Inline and parallel drive configurations
                              Ball screw and lead screw configurations
                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              Custom versions available
                          • Motorized with Built-in Motor Encoders

                              • LRT-EC Series

                              • High-load motorized linear stages with built-in motor encoders and dust covers

                                100, 250, 500, 750, 1000, 1500 mm travel
                                500 kg load capacity
                                High cantilever stiffness
                                Up to 360 mm/s speed and up to 1200 N thrust
                                Built-in, 400 CPR, motor encoder provides slip/stall detection and recovery
                                Ball screw and lead screw configurations
                                Includes stainless steel dust covers
                              • LRQ-EC Series

                              • Motorized linear stages with built-in motor encoders and dust covers
                              • LRQ-E Series

                              • Motorized linear stages with built-in motor encoders
                                75, 150, 300, 450, 600 mm travel
                                100 kg load capacity
                                Up to 840 mm/s speed and up to 300 N thrust
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Inline and parallel drive configurations
                                Ball screw and lead screw configurations
                                Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available
                              • LSQ-E Series

                              • High-speed motorized linear stages with built-in motor encoders
                                75, 150, 300, 450 and 600 mm travel
                                20 kg load capacity
                                Up to 1 m/s speed and up to 100 N thrust
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available
                              • LRM-E Series

                              • Miniature, steel motorized linear stages with built-in motor encoders
                                Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                                25, 50, 100, 150, 200 mm travel
                                Up to 8 µm accuracy and 50 nm resolution
                                Encoder position feedback with slip/stall detection and automatic recovery
                                50 kg load capacity
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              • LSM-E Series

                              • Miniature motorized linear stages with built-in motor encoders
                                25, 50, 100, 150 and 200 mm travel
                                10 kg load capacity
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Multiple LSM-E stages can be assembled in XY or XYZ configurations without additional hardware
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                Custom versions available
                              • LHM-E Series

                              • Economy motorized linear stage with built-in motor encoders
                                3 kg load capacity
                                Up to 65 mm/s speed; 25 N peak thrust
                                50 N⋅cm cantilever load
                                Encoder position feedback with slip/stall detection and automatic recovery
                                Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                            • Motorized

                                • LRT-C Series

                                • High-load motorized linear stages with dust covers
                                  100, 250, 500, 750, 1000, 1500 mm travel
                                  500 kg load capacity
                                  High cantilever stiffness
                                  Up to 360 mm/s speed and up to 1200 N thrust
                                  Ball screw and lead screw configurations
                                  Includes stainless steel dust covers
                                • LSQ Series

                                • Motorized linear stages
                                  75, 150, 300, 450 and 600 mm travel
                                  20 kg load capacity
                                  Up to 1 m/s speed and up to 100 N thrust
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  Custom versions available
                                • LRM Series

                                • Miniature, steel motorized linear stages
                                  Hardened steel construction and integrated recirculating ball bearing guide provide exceptional stiffness and thermal stability
                                  25, 50, 100, 150, 200 mm travel
                                  Up to 8 µm accuracy and 50 nm resolution
                                  50 kg load capacity
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                • LSM Series

                                • Miniature motorized linear stages
                                  25, 50, 100, 150 and 200 mm travel
                                  10 kg load capacity and up to 104 mm/s speed
                                  Very low profile at only 21 mm stage height
                                  Can be mounted in XY and XYZ configurations
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  Custom versions available
                                • LHM Series

                                • Economy m3 kg load capacity
                                  Up to 65 mm/s speed; 25 N peak thrust
                                  50 N⋅cm cantilever load
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  otorized linear stage
                                • LSA Series

                                • Micro motorized linear stages10 or 25 mm travel
                                  < 25 nm microstep size
                                  Up to 10 mm/s speed and up to 3.5 kg thrust
                                  Fits into the most restrictive spaces
                                  Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                  Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                              • Non-motorized

                                    • TSB Series

                                    • Translation stages
                                      25, 28, 50 and 60 mm travel
                                      10 kg load capacity
                                      Available with a micrometer head
                                      Stages without a manual micrometer require a X-NA, T-NA08, T-LA, or an NA11
                                • Vertical Stages

                                    • X-VSR Series

                                    • Vertical lift stages with built-in controllers
                                      20 mm or 40 mm travel
                                      Up to 48 mm/s speed and up to 200 N thrust
                                      10 kg load capacity
                                      55 or 85 mm retracted height
                                      Built-in controller; daisy-chains with other Zaber products
                                    • VSR Series

                                    • Vertical lift stage
                                      20 mm or 40 mm of travel
                                      Up to 48 mm/s speed and up to 200 N thrust
                                      10 kg load capacity
                                      55 or 85 mm retracted height
                                      Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                  • Rotary Stages

                                      • Motorized with Built-in Controllers and Direct Reading Encoders

                                            • X-RST-DE Series

                                            • High precision motorized rotary stages with built-in controllers and direct encoders
                                        • Motorized with Built-in Controllers and Motor Encoders

                                            • X-RST-E Series

                                            • High load motorized rotary stages with built-in controllers and motor encoders
                                            • X-RSB-E Series

                                            • High speed motorized rotary stages with built-in controllers and motor encoders
                                              Continuous 360° rotation stage
                                              Speeds up to 300 rpm
                                              50.8 mm aperture
                                              Built-in controller; daisy-chains with other Zaber products
                                              Multiple motor configurations
                                              Encoder position feedback with slip/stall detection and automatic recovery
                                            • X-RSW-E Series

                                            • Motorized rotary stages with built-in controllers and motor encoders
                                              Worm gear driven for continuous rotation
                                              Two lens holders allow for use as a polarizer mount
                                              Speed up to 75 rpm and torque up to 2.25 N⋅m
                                              Encoder position feedback with slip/stall detection and automatic recovery
                                              Built-in controller; daisy-chains with other Zaber products
                                              Multiple X-Series products in a daisy-chain can share a single power supply
                                              Custom versions available
                                            • X-RSM-E Series

                                            • Motorized rotation stages with built-in controllers and motor encoders
                                              21 mm total height
                                              0.02° repeatability
                                              4 mm aperture
                                              50 N load capacity
                                              Worm gear driven for continuous rotation
                                              Built-in controller; daisy-chains with other Zaber products
                                              Encoder position feedback with slip/stall detection and automatic recovery
                                          • Motorized with Built-in Controllers

                                              • X-RST Series

                                              • High load motorized rotary stages with built-in controllers
                                                50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                50 kg centered load capacity
                                                Speed up to 24 °/s and torque up to 10 N⋅m
                                                Built-in controller; daisy-chains with other Zaber products
                                                Multiple X-Series products in a daisy-chain can share a single power supply
                                                Custom versions available
                                              • X-RSB Series

                                              • High speed motorized rotary stages with built-in controllers
                                                Continuous 360° rotation stage
                                                Speeds up to 300 rpm
                                                50.8 mm aperture
                                                Built-in controller; daisy-chains with other Zaber products
                                                Multiple motor configurations
                                              • X-RSW Series

                                              • Motorized rotary stages with built-in controllers
                                                Worm gear driven for continuous rotation
                                                Two lens holders allow for use as a polarizer mount
                                                Speed up to 75 rpm and torque up to 2.25 N⋅m
                                                20 kg centered load capacity
                                                Built-in controller; daisy-chains with other Zaber products
                                                Multiple X-Series products in a daisy-chain can share a single power supply
                                                Custom versions available
                                              • X-RSM Series

                                              • Motorized rotary stages with built-in controllers
                                                21 mm total height
                                                0.02° repeatability
                                                4 mm aperture
                                                50 N load capacity
                                                Worm gear driven for continuous rotation
                                                Built-in controller; daisy-chains with other Zaber products
                                            • Motorized with Built-in Direct Reading Encoders

                                                  • RST-DE Series

                                                  • High precision motorized rotation stages with built-in direct reading encoders
                                                    Direct reading encoder for position correction; stage accuracy to 0.01°
                                                    Continuous 360° rotation stage
                                                    50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                    50 kg centered load capacity
                                                    Speed up to 24 °/s and torque up to 10 N⋅m
                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                    Custom versions available
                                              • Motorized with Built-in Motor Encoders

                                                  • RST-E Series

                                                  • High load motorized rotation stages with built-in motor encoders

                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                    Continuous 360° rotation stage
                                                    50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                    50 kg centered load capacity
                                                    Speed up to 24 °/s and torque up to 10 N⋅m
                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                    Custom versions available
                                                  • RSB-E Series

                                                  • High speed motorized rotation stages with built-in motor encoders
                                                    Continuous 360° rotation stage
                                                    Speeds up to 300 rpm
                                                    50.8 mm aperture
                                                    Multiple motor configurations
                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                    Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                  • RSW-E Series

                                                  • Motorized rotation stages with built-in motor encoders
                                                    Worm gear driven for continuous rotation
                                                    Two lens holders allow for use as a polarizer mount
                                                    Speed up to 75 rpm and torque up to 225 N⋅cm
                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                    23 mm aperture
                                                    Designed for use with an X-MCB1 controller, or can be used with any 2-phase stepper motor controller
                                                    Custom versions available
                                                  • RSM-E Series

                                                  • Motorized rotation stages with built-in motor encoders
                                                    21 mm total height
                                                    0.02° repeatability
                                                    4 mm aperture
                                                    50 N load capacity
                                                    Worm gear driven for continuous rotation
                                                    Encoder position feedback with slip/stall detection and automatic recovery
                                                    Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                • Motorized

                                                    • RST Series

                                                    • High load motorized rotation stages
                                                      Continuous 360° rotation stage
                                                      50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly
                                                      50 kg centered load capacity
                                                      Speed up to 24 °/s and torque up to 10 N⋅m
                                                      Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                    • RSB Series

                                                    • High speed motorized rotation stages
                                                      Continuous 360° rotation stage
                                                      Speeds up to 300 rpm
                                                      50.8 mm aperture
                                                      Multiple motor configurations
                                                      Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                    • RSW Series

                                                    • Motorized rotation stages
                                                      Worm gear driven for continuous rotation
                                                      Two lens holders allow for use as a polarizer mount
                                                      Speed up to 75 rpm and torque up to 225 N⋅cm
                                                      23 mm aperture
                                                      Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                      Custom versions available
                                                    • RSM Series

                                                    • Motorized rotation stages
                                                      21 mm total height
                                                      0.02° repeatability
                                                      4 mm aperture
                                                      50 N load capacity
                                                      Worm gear driven for continuous rotation
                                                      Designed for use with a X-MCB1 controller or can be used with any 2-phase stepper motor controller
                                                  • Stepper Motors

                                                      • X-NMS-E Series

                                                      • Stepper motors with built-in controllers and motor encoders
                                                        NEMA 17 stepper motor with built-in controller
                                                        Up to 25,600 microsteps per revolution
                                                        Up to 2,650 rpm speed and 30 N⋅cm torque
                                                        Home sensor and small magnet included, optional magnetic away sensor
                                                        Daisy-chains data and power with X-series products
                                                        Custom versions available
                                                      • X-NMS Series

                                                      • Stepper motors with built-in controllers
                                                        NEMA 17 stepper motor with built-in controller
                                                        Up to 25,600 microsteps per revolution
                                                        Up to 2,650 rpm speed and 30 N⋅cm torque
                                                        Home sensor and small magnet included, optional magnetic away sensor
                                                        Daisy-chains data and power with X-series products
                                                        Custom versions available
                                                      • NM Series

                                                      • Stepper motors
                                                        Standard NEMA frame stepper motors
                                                        Available in size 8 to 34 for a variety of torques and speeds with single or double shaft
                                                        Home sensor (HSM8) and small magnet included
                                                        Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        Custom versions available
                                                    • Optical Mounts

                                                        • X-FWR-E Series

                                                        • Motorized filter wheels with built-in controllers and motor encoders
                                                          Interchangeable filter holders for 25 mm optics (10 positions) or 32 mm optics (7 positions)
                                                          Smooth, high speed filter changes; Adjacent filter change time of 57 ms (10 position wheel)
                                                          Built-in controller; daisy-chains with other Zaber products
                                                          Mounting provided for optical cage systems and C-mount components
                                                        • T-OMG Series

                                                        • Miniature motorized gimbal optic mounts with built-in controllers
                                                          Two-axis gimbal mount with +/- 7 deg range
                                                          Holds 1" (25 mm) optics
                                                          Built-in controller; daisy-chains data and power with other T-Series products
                                                          Our most compact optical mount weighing only 350 grams
                                                        • T-MM Series

                                                        • Motorized mirror mounts with built-in controllers
                                                          Two-axis kinematic mount with +/-5° range
                                                          Repeatability down to 0.015°
                                                          Holds 2" (50 mm) optics; adaptors available for C-Mount, 1" (25 mm), and 1/2" (12.5 mm) optics
                                                          Built-in controller; daisy-chains data and power with other T-Series products
                                                      • Goniometers

                                                          • X-GSR-E Series

                                                          • Large diameter, motorized goniometers with built-in controllers and motor encoders
                                                            Integrated, 500 CPR, motor mounted encoder provides slip/stall detection and automatic recovery
                                                            Built-in controller; daisy-chains with other Zaber products
                                                            Up to 80 deg/s speed and up to 60 Nm of torque
                                                            50 kg centred load capacity
                                                            150 mm and 225 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                          • X-GSM-E Series

                                                          • Motorized goniometers with built-in controllers and motor encoders
                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                            30 N load capacity
                                                            Low profile, small footprint
                                                            Built-in controller; daisy-chains with other Zaber products
                                                            Encoder position feedback with slip/stall detection and automatic recovery
                                                          • X-GSM Series

                                                          • Motorized goniometers with built-in controllers
                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                            30 N load capacity
                                                            Low profile, small footprint
                                                            Built-in controller; daisy-chains with other Zaber products
                                                          • GSM-E Series

                                                          • Motorized goniometers with built-in motor encoders
                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                            30 N load capacity
                                                            Low profile, small footprint
                                                            Encoder position feedback with slip/stall detection and automatic recovery
                                                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                          • GSM Series

                                                          • Motorized goniometers
                                                            40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                            30 N load capacity
                                                            Low profile, small footprint
                                                            Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                        • Grippers

                                                            • X-GLP-E Series

                                                            • Parallel grippers with built-in motor encoders and controllers
                                                              40 mm travel
                                                              Grips and measures different sized objects without programming
                                                              Position feedback from motor encoder
                                                              Maintains grip even if power is lost
                                                              Built-in controller
                                                              Daisy-chains with other X-Series products to share a single power supply
                                                              Includes removable finger blanks
                                                            • GLP-E Series

                                                            • Parallel grippers with motor encoders
                                                              40 mm travel
                                                              Measures size of gripped part with motor encoder
                                                              Maintains grip even if power is lost
                                                              Includes removable finger blanks
                                                              Designed for use with an X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                          • Vacuum Devices

                                                              • High Vacuum Devices with Built-in Controllers

                                                                  • X-LRQ-SV2 Series

                                                                  • High vacuum motorized linear stages with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    75, 150, 300, 450, 600 mm travel
                                                                    100 kg load capacity
                                                                    Up to 205 mm/s speed and up to 100 N thrust
                                                                    Built-in controller; daisy-chains with other Zaber products
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                    Custom versions available
                                                                  • X-LSM-SV2 Series

                                                                  • High vacuum miniature motorized linear stages with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    25, 50, 100, 150, 200 mm travel
                                                                    10 kg load capacity
                                                                    Up to 100 mm/s speed and up to 35 N thrust
                                                                    Built-in controller; daisy-chains with other Zaber products
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                    Custom versions available
                                                                  • X-VSR-SV2 Series

                                                                  • High vacuum vertical stages with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    20 mm or 40 mm travel
                                                                    Up to 48 mm/s speed and up to 200 N thrust
                                                                    10 kg load capacity
                                                                    55 or 85 mm retracted height
                                                                    Built-in controller; daisy-chains with other Zaber products
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                  • X-RSW-SV2 Series

                                                                  • High vacuum motorized rotary stages with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    Worm gear driven for continuous rotation
                                                                    20 kg load capacity
                                                                    Speed up to 100 °/s and torque up to 100 N⋅cm
                                                                    Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                  • X-RSM-SV2 Series

                                                                  • High vacuum light load rotary stages with built-in controllers

                                                                    Vacuum compatible to 10-6 Torr
                                                                    21 mm total height
                                                                    0.02° repeatability
                                                                    4 mm aperture
                                                                    Worm gear driven for continuous rotation
                                                                    Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                  • X-GSM-SV2 Series

                                                                  • High vacuum motorized goniometers with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                    Built-in controller; daisy-chains with other Zaber products
                                                                    Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                  • T-NA-SV2 Series

                                                                  • High vacuum micro linear actuators with built-in controllers
                                                                    Vacuum compatible to 10-6 Torr
                                                                    25 and 50 mm travel
                                                                    Up to 8 mm/s speed and up to 46 N thrust
                                                                    Our most compact, precise and robust actuator
                                                                    Built-in controller; daisy chains with other T-series devices inside vacuum chamber
                                                                    Designed to replace standard micrometer heads on manual translation stages
                                                                    Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
                                                                • High Vacuum Devices with Stand-alone Controllers

                                                                    • LRQ-V2 Series

                                                                    • High vacuum motorized linear stages
                                                                      Vacuum compatible to 10-6 Torr
                                                                      75, 150, 300, 450, 600 mm travel
                                                                      100 kg load capacity
                                                                      Up to 205 mm/s speed and up to 100 N thrust
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                    • LSM-V2 Series

                                                                    • High vacuum miniature motorized linear stages

                                                                      Vacuum compatible to 10-6 Torr
                                                                      25, 50, 100, 150, 200 mm travel
                                                                      10 kg load capacity
                                                                      Up to 100 mm/s speed and up to 35 N thrust
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                      Custom versions available
                                                                    • LSA-V2 Series

                                                                    • High vacuum micro motorized linear stages
                                                                      Vacuum compatible to 10-6 Torr
                                                                      10 or 25 mm travel
                                                                      < 25 nm microstep size
                                                                      Up to 10 mm/s speed and up to 35 N thrust
                                                                      Fits into the most restrictive spaces
                                                                      Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                    • VSR-V2 Series

                                                                    • High vacuum vertical stages
                                                                      Vacuum compatible to 10-6 Torr
                                                                      20 mm or 40 mm travel
                                                                      Up to 48 mm/s speed and up to 200 N thrust
                                                                      10 kg load capacity
                                                                      55 or 85 mm retracted height
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                    • RSW-V2 Series

                                                                    • High vacuum motorized rotary stages
                                                                      Vacuum compatible to 10-6 Torr
                                                                      Worm gear driven for continuous rotation
                                                                      20 kg load capacity
                                                                      Speed up to 100 °/s and torque up to 100 N⋅cm
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                    • RSM-V2 Series

                                                                    • High vacuum light load rotary stages
                                                                      Vacuum compatible to 10-6 Torr
                                                                      21 mm total height
                                                                      0.02° repeatability
                                                                      4 mm aperture
                                                                      Worm gear driven for continuous rotation
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                    • GSM-V2 Series

                                                                    • High vacuum motorized goniometers
                                                                      Vacuum compatible to 10-6 Torr
                                                                      40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                      Only 7 feedthrough wires required to control these units
                                                                      Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                  • Low Vacuum Devices with Built-in Controllers

                                                                      • X-LRQ-SV1 Series

                                                                      • Low vacuum motorized linear stages with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        75, 150, 300, 450, 600 mm travel
                                                                        100 kg load capacity
                                                                        Up to 205 mm/s speed and up to 100 N thrust
                                                                        Built-in controller; daisy-chains with other Zaber products
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        Custom versions available
                                                                      • X-LSM-SV1 Series

                                                                      • Low vacuum miniature motorized linear stages with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        25, 50, 100, 150, 200 mm travel
                                                                        10 kg load capacity
                                                                        Up to 100 mm/s speed and up to 35 N thrust
                                                                        Built-in controller; daisy-chains with other Zaber products
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                        Custom versions available
                                                                      • X-VSR-SV1 Series

                                                                      • Low vacuum vertical stages with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        20 mm or 40 mm travel
                                                                        Up to 48 mm/s speed and up to 200 N thrust
                                                                        10 kg load capacity
                                                                        55 or 85 mm retracted height
                                                                        Built-in controller; daisy-chains with other Zaber products
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                      • X-RSW-SV1 Series

                                                                      • Low vacuum motorized rotary stages with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        Worm gear driven for continuous rotation
                                                                        20 kg load capacity
                                                                        Speed up to 100 °/s and torque up to 100 N⋅cm
                                                                        Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                      • X-RSM-SV1 Series

                                                                      • Low vacuum light load rotary stages with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        21 mm total height
                                                                        0.02° repeatability
                                                                        4 mm aperture
                                                                        Worm gear driven for continuous rotation
                                                                        Integrated stepper motor controller and motor driver allows for easy-to-use control
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                      • X-GSM-SV1 Series

                                                                      • Low vacuum motorized goniometers with built-in controllers

                                                                        Vacuum compatible to 10-3 Torr
                                                                        40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                        Built-in controller; daisy-chains with other Zaber products
                                                                        Only 4 feedthrough wires required to control all units in the daisy-chain via serial port (with an X-PIB adaptor)
                                                                      • T-NA-SV1 Series

                                                                      • Low vacuum micro linear actuators with built-in controllers
                                                                        Vacuum compatible to 10-3 Torr
                                                                        25 and 50 mm travel
                                                                        Up to 8 mm/s speed and up to 46 N thrust
                                                                        Our most compact, precise and robust actuator
                                                                        Built-in controller; daisy chains with other T-series devices inside vacuum chamber
                                                                        Designed to replace standard micrometer heads on manual translation stages
                                                                        Hardened ball-tip (removable so you can use the built-in threaded tip or a flat tip)
                                                                      • T-MM-V Series

                                                                      • Low vacuum motorized mirror mounts with built-in controllers
                                                                        Two-axis kinematic mount with +/-5° range
                                                                        Repeatability down to 0.0005°
                                                                        Holds 2" (50 mm) optics; adaptors available for C-Mount, 1" (25mm), and 1/2" (12.5mm) optics
                                                                        Built-in controller; daisy chains with other T-series products inside the vacuum chamber
                                                                        Low vacuum compatible to 10-3 Torr
                                                                    • Low Vacuum Devices with Stand-alone Controllers

                                                                        • LRQ-V1 Series

                                                                        • Low vacuum motorized linear stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          75, 150, 300, 450, 600 mm travel
                                                                          100 kg load capacity
                                                                          Up to 205 mm/s speed and up to 100 N thrust
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • LSM-V1 Series

                                                                        • Low vacuum miniature motorized linear stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          25, 50, 100, 150, 200 mm travel
                                                                          10 kg load capacity
                                                                          Up to 100 mm/s speed and up to 35 N thrust
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                          Custom versions available
                                                                        • LSA-V1 Series

                                                                        • Low vacuum micro motorized linear stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          10 or 25 mm travel
                                                                          < 25 nm microstep size
                                                                          Up to 10 mm/s speed and up to 35 N thrust
                                                                          Fits into the most restrictive spaces
                                                                          Mounts directly in XY (requires AB106 angle bracket for Z axis/vertical mounting)
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • VSR-V1 Series

                                                                        • Low vacuum vertical stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          20 mm or 40 mm travel
                                                                          Up to 48 mm/s speed and up to 200 N thrust
                                                                          10 kg load capacity
                                                                          55 or 85 mm retracted height
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • RSW-V1 Series

                                                                        • Low vacuum motorized rotary stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          Worm gear driven for continuous rotation
                                                                          20 kg load capacity
                                                                          Speed up to 100 °/s and torque up to 100 N⋅cm
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • RSM-V1 Series

                                                                        • Low vacuum light load rotary stages
                                                                          Vacuum compatible to 10-3 Torr
                                                                          21 mm total height
                                                                          0.02° repeatability
                                                                          4 mm aperture
                                                                          Worm gear driven for continuous rotation
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                        • GSM-V1 Series

                                                                        • Low vacuum motorized goniometers
                                                                          Vacuum compatible to 10-3 Torr
                                                                          40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation
                                                                          Only 7 feedthrough wires required to control these units
                                                                          Designed for use with a X-MCB1 Series stepper motor controller or any 2-phase stepper motor controller
                                                                      • Non-motorized

                                                                            • TSB-V Series

                                                                            • Low vacuum translation stages
                                                                              Vacuum compatible to 10-3 Torr
                                                                              28 and 60 mm travel
                                                                              10 kg load capacity
                                                                              Requires a T-NA-SV1 actuator to drive it
                                                                        • Micromanipulators

                                                                              • M-LSM Series

                                                                              • Motorized micromanipulators
                                                                                Adjustable probe holder
                                                                                Up to 14 mm/s speed and 15 N thrust
                                                                                Plug and play controllers and Joystick included
                                                                                25 mm travel XYZ with resolution finer than 0.05 µm
                                                                                Programmable or joystick-activated 4th virtual axis to allow approach along probe angle
                                                                          • XY, XYZ & Gantry Systems

                                                                              • XY Series

                                                                              • Two-axis stages with built-in controllers13 mm up to 1000 mm travel per axis
                                                                                Built-in controllers
                                                                                Several units daisy-chain to a single serial port
                                                                                Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                Available in various speed / resolution options
                                                                                Custom versions available
                                                                              • XYZ Series

                                                                              • Three-axis stages with built-in controllers
                                                                                13 mm up to 450 mm travel per axis
                                                                                Built-in controllers
                                                                                Several units daisy-chain to a single serial port
                                                                                Machinist's Square (SQ3) included free with all XY and XYZ systems
                                                                                Available in various speed / resolution options
                                                                                Custom versions available
                                                                              • T-G-LSM Series

                                                                              • Gantry systems with built-in controllers
                                                                                100 or 200 mm travel per axis (custom lengths available)
                                                                                Low profile - 70 mm overall height
                                                                                Customizable - add another Zaber stage for a Z-axis
                                                                                Custom versions available
                                                                              • G-LSQ Series

                                                                              • Gantry systems
                                                                                150, 300 or 450 mm travel per axis
                                                                                Up to 330 mm/s speed or 100 N thrust depending on lead screw choice
                                                                                Customizable - add another Zaber stage for a Z-axis
                                                                                Designed for use with X-MCB2 Series two-axis stepper motor controllers
                                                                                Custom versions available
                                                                            • Scanning & Microscope Stages

                                                                                • ASR-E Series

                                                                                • Closed-loop motorized XY scanning stages with built-in motor encoders
                                                                                  50 mm up to 305 mm travel per axis
                                                                                  Easily adjustable non-contact hall sensor limit switches
                                                                                  Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                  Supported by µManager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                  Custom versions available
                                                                                • ASR Series

                                                                                • Motorized XY microscope stages
                                                                                  50 mm up to 305 mm travel per axis
                                                                                  Easily adjustable non-contact hall sensor limit switches
                                                                                  Up to 12 µm accuracy; 2 µm repeatability; 85 mm/s speed
                                                                                  Supported by µManager and MetaMorph® Microscopy Automation & Image Analysis Software
                                                                                  Custom versions available
                                                                              • Controllers & Joysticks

                                                                                  • X-MCB2 Series

                                                                                  • Stepper motor controllers, two-axis, 2D linear and circular interpolation
                                                                                    Controls two axes of bipolar stepper motors or actuators, 1.41 Arms (2.0 A peak) per phase drivers
                                                                                    Coordinated 2D linear and circular interpolation with line, arc, and circle primitives
                                                                                    Executes streaming commands and primitives from computer seamlessly in real time
                                                                                    Each axis is also capable of independent and pre-emptive motion with trapezoidal velocity profile
                                                                                    High speed quadrature encoder input and 4 limit switch inputs per axis
                                                                                    4 isolated digital inputs, 4 isolated digital outputs, and 4 analog inputs
                                                                                    Multiple communications options: RS-232, RS-485 and USB
                                                                                    Intuitive ASCII protocol, programmable triggers, and macros simplify complex automation tasks
                                                                                    Designed for easy mounting to panels, breadboards, lab benches, and enclosures
                                                                                    Axes can be locked together to move simultaneously as if they were a single axis, carrying out all motion in parallel
                                                                                  • X-MCB1 Series

                                                                                  • Stepper motor controllers
                                                                                    Controls any bipolar stepper motor or actuator with high resolution using an integrated 1.41 Arms (2.0 A peak) per phase driver with customizable microstepping
                                                                                    Two isolated digital inputs, two isolated digital outputs, and two analog inputs
                                                                                    Intuitive ASCII protocol simplifies complex automation tasks
                                                                                    Designed for easy mounting to panels, breadboards, lab benches, and enclosures
                                                                                  • X-MCA Series

                                                                                  • Stepper Motor Controllers
                                                                                    Controls any bipolar stepper motor or actuator with high resolution using an integrated 1.0 Arms (1.4 A peak) per phase driver with customizable micro-stepping
                                                                                    Intuitive ASCII protocol simplifies complex automation tasks
                                                                                    Designed for easy mounting to panels, breadboards, lab benches, DIN rails and enclosures
                                                                                    Support linear and motor encoders for closed-loop control
                                                                                  • X-JOY3 Series

                                                                                  • Programmable 3-axis joystick
                                                                                    Controls up to three axes, each with programmable sensitivity and velocity profile
                                                                                    Compact bench-top design for manual control with or without a computer
                                                                                    Eight programmable keys for functions like storing and recalling positions
                                                                                    Intuitive ASCII protocol simplifies complex automation tasks
                                                                                    Custom versions available
                                                                                    Technical Article - Manual Control Using a Joystick