- Offer Profile
- Tolomatic is a leading supplier of linear actuators, both electric and pneumatically driven. Backed by the best service in the industry, Tolomatic's expertise includes linear actuators, servo driven high thrust actuators, servo and stepper motors, drives, and configured linear systems. Standard products are built-to-order and shipped in 5 days or less. Tolomatic also manufactures right-angle gear drives, caliper disc brakes, and clutches.
Electric Linear Motion
- Tolomatic has all you need for electric linear motion control with an extensive offering of rodless and rod-style electrical linear actuators. Complete your actuator system with either servo or stepper motion control.
Electric Rod Actuators
- Tolomatic offers a wide variety of electric rod actuator/cylinder solutions from low cost to high performance.
ERD Low-cost Electric Cylinders for Pneumatic Cylinder Replacement
-
ERD low-cost electric cylinder series are the perfect alternative to pneumatic cylinders for automating manual processes.
The ERD is an economical electric cylinder and is compatible with many NEMA & metric mount stepper and servo motors to create a flexible, powerful, yet cost-effective electric cylinder solution over traditional pneumatic cylinders.
Perfect for gating, sorting, diverting and product change overs, ERD electric cylinders offer these features:
- 4 body sizes
- Ball and acme screw choices
- Force/thrust capabilities up to 500 lbf (2.2 kN)
- Stroke lengths up to 24 inches (610 mm)
- Guide and anti-rotate options
- Stepper and servo drive/controller and motor solutions
- IP67 and IP69K options
- All stainless steel body options
ERD-SS2 Stainless Steel Electric Actuators with Protective Motor Enclosure
-
ERD stainless steel electric actuators are IP69k rated and are washdown ready.
The all stainless steel ERD actuator with protective motor enclosure (ERD-SS2) accommodates both servo (23-frame) and stepper (NEMA 17 and NEMA 23-frame) motors. Combine any ERD-SS2 with the Tolomatic ACS servo or stepper drive and get a complete motion control system with high performance at a very competitive price.
- 3 body sizes
- Ball and acme screw choices
- Force/thrust capabilities up to 500 lbf (2.2 kN)
- Stroke lengths up to 24 inches (610 mm)
- Choice of stepper and servo drive/controller and motor solutions
ERD Hygienic (3A/USDA approved) Electric Actuators
-
ERD hygienic electric actuators are approved by 3A and USDA for food and beverage applications.
Tolomatic's line of hygienically designed all stainless steel electric actuators offer up to 7868 lbf (35 kN) and they are the perfect solution for food and beverage applications where higher forces are required for pressing, pumping, cutting or slicing. Use the Tolomatic Your Motor Here® database to select from a wide variety of stainless steel motor manufacturers for a complete all stainless package.
- 3 body sizes
- Ball, acme and roller screw choices
- Force/thrust capabilities up to 7,868 lbf (35 kN)
- Stroke lenghts up to 39.4 inches (1001 mm)
- IP69K with all stainless steel construction is standard
- USDA and 3A (#14159-1-2010) approved hygienic option for over food operation
- Standard 15-day built-to-order shipping
RSA/RSM-ST Electric Linear Rod Actuators
-
The RSA-ST electric linear rod actuator combines excellent accuracy with a low-to-medium thrust capacity
RSA-ST electric linear rod actuators feature accurate, medium force performance making them ideal for replacing pneumatic cylinders. High thrust bearings and internal bumpers deliver heavy duty performance. A rigid, strong aluminum housing allows for easy mounting of switches and sensors. These electric linear rod actuators are suitable for pneumatic replacement, general motion control applications and many more.
- 6 body sizes with built-to-order stroke lengths of 12 to 60 inches (305 to 1,524 mm)
- Maximum thrusts of up to 4,038 lbf (40,257 N)
- Solid, ball and bronze screw/nut combinations
- Available with low-backlash ball screw/nut
- Multiple mounting options
IMA Linear Servo Actuators
-
The IMA servo linear actuator has a unique integrated servo motor design.
The IMA is an integrated linear servo actuator design in a compact, heavy duty package. Available in both ball and roller screw configurations, the IMA servo linear actuators provide forces up to 6875 lbs even in high duty cycle applications.
Get extremely long service life with IMA linear servo actuators
Utilizing Tolomatic's patented re-lubrication design, the IMA heavy duty linear servo actuators can easily be relubricated without disassembly for extremely long service life.
IMA linear servo actuator simplifies mechanical design.
Tolomatic's unique integrated linear servo actuator design eliminates:
- Motor Couplers
- Motor Adapters
- Timing Belts
- Gear boxes
- Unneeded assembly labor
- Forced air or water cooling
- Hydraulic systems
- Pneumatic systems
- Need for multiple vendors
IMA Food Grade Servo Actuator
-
The IMA food grade servo linear actuator offers sanitary protection in wash-down applications.
IMA food grade servo actuators offer a white epoxy food grade coating, food grade grease and are available with stainless-steel fasteners, rod and rod ends. Using the same integrated servo motor design as IMA servo linear actuators they offer a compact footprint. Available in both ball and roller screw configurations, IMA food grade servo actuators provide forces up to 30.6 kN (6875 lbf) even in high duty cycle applications. The standard servo motor is available with many feedback types to integrate with most servo drives.
Get sanitary protection and long service life with IMA food grade servo actuators
Tolomatic's patented re-lubrication design offers easy re-lubrication with food grade grease and do not require disassembly for reduced maintenance.
Tolomatic IMA food grade servo actuator design eliminates:- Contamination from air or oil
- Hydraulic systems
- Pneumatic systems
- Forced air or water cooling
- Need for multiple vendors
- Unneeded assembly labor
- Motor couplers, adapters, timing belts and gear boxes
GSA/GSM Linear Slide Actuators
-
The GSA linear slide actuator is ideal for medium- to high-thrust applications.
GSA/GSM Linear Slide Actuators combine an electric rod actuator with guide rods, mounting blocks and bearings. A complete selection of sizes, options and system components are available. The GSA/GSM Linear Slide Actuator offers high performance, dependability and mounting flexibility for pivotal applications.
- 4 U.S. customary and metric body sizes
- Thrust capacities range from 70 to 950 lbf (.31 to 4.2 kN)
- Wide tooling plate for end effector mounting
- Choice of linear ball or composite bearings with internal lubrication of guide rods for increased bearing life
- Standard or oversized guide rod diameter for increased rigidity and lower deflection
- Strokes in any incremental length up to 36 inches (91 mm) depending on body size
SWA/SWB ServoWeld® Integrated Servo Spot Welding Actuators
-
ServoWeld® SWA & SWB integrated servo spot welding Actuators offer light weight with high performance
Tolomatic's ServoWeld family of lighter weight integrated servo motor actuators for resistance spot welding (RSW) provide a cost-effective actuator design and best-in-class performance. SWA/B actuators provide users the lowest lifetime cost (lowest cost per spot weld) by providing the highest quality welds (best force repeatability) combined with the longest lasting actuators. ServoWeld SWA/B integrated servo spot welding actuators are highly efficient and the broad product family has may choices to optimize weight and performance.
SWA/SWB integrated servo motor actuators offer:- 20+ million cycles for SWA models and 10+ million cycles for SWB
- Standard roller screw with highest dynamic load rating for more welds over competing roller screws, ball screws or pneumatic actuators
- Skewed motor windings designed for welding minimizes motor cogging for the best force repeatability
- Light-weight actuator design
- Forces to 4,000 lbf (17.8 kN)
- Optional water cooling
RSA/RSM-HT Heavy Duty, High Force Electric Rod Actuators
-
Heavy duty electric rod actuator ideal for applications requiring high force performance in tough environments.
The RSA/RSM-HT heavy duty electric rod actuator accommodates larger motors and delivers high force with excellent accuracy. These high force electric linear actuators feature ball or roller screw selections, an enhanced high thrust bearing and heavy duty internal bumpers. The standard grease zerk extends screw life by making relubrication easy and convenient without dissassembly. RSA/RSM-HT actuators are suitable for valve actuation, punch press, injection molding applications and many more.
- 4 body sizes with stroke lengths from 18 to 60 inches (457 to 1,524 mm)
- Maximum force/thrust up to 13,039 lbf (58,001 N)
- Positional accuracy of +/- 0.0004"/ft (+/- 0.0102mm/300mm) for roller screw actuators or +/- 0.002"/ft (+/- 0.051mm/300mm) for ball screw models
- Optional IP67 linear actuator configuration available to protect against dust and moisture
RSX Extreme Force Electric Linear Actuators
-
Replace hydraulics without the messy leaks or noisy operation.
The RSX family of extreme force electric linear actuators are more efficient and flexible compared to hydraulic cylinders. Designed and tested for 100% duty cycle, the RSX family of hydraulic class actuators will be capable of up to 50,000 lbf (222.5 kN). The first RSX actuator in the family, the RSX-096 is capabable of 30,000 lbf (133.5 kN) and is designed to withstand extreme conditions and cold-weather operation.
RSX extreme force electric linear actuators offer these features:
- Roller screw driven for long, consistent life
- Type III hardcoat anodized aluminum or zinc-plated steel
- Anti-rotation of the actuator rod
- IP67 rated for water, dust and corrosion resistance
- Compatible with servo motors and gearboxes up to 215mm frame sizes
ServoChoke® SVC Electric Choke Valve Actuator / Operator
-
ServoChoke® SVC is a high performance linear integrated electric choke valve
actuator that meets the rigorous needs of the oil and gas industry. The SVC
provides a more reliable, high-speed, precision electric choke operator in
performance drilling applications vs. conventional hydraulics or jack screw
assemblies. The ServoChoke SVC is perfect for Managed Pressure Drilling (MPD),
Set-point choke control and Choke & Kill for well control applications.
The actuator's integrated servo motor, gear box and planetary roller screw enables the ServoChoke SVC to quickly and continuously modulate with the highest accuracy and repeatability. With global certifications for ATEX, IECEx, and Class I Div. 1 together with a temperature rating of -40° C to +60° C, the all steel, SVC actuator is designed to perform in the harshest environments.- Globally certified: CID1 • ATEX • IECEx
- Worry-free performance in the most hazardous location environments
- Speeds up to 19.6 mm/sec (0.77"/sec) - open/close choke in less than 3.2 seconds
- 3 mm (0.125") adjustments happen in less than 0.5 second
- Temperature range: -40° to +60°C (-40° to +140° F)
- Positional repeatability to within 0.08% of span or better
- Planetary roller screw for long life and no maintenance
- Fully integrated motor/actuator/feedback in a single, sealed housing
- Rugged NACE MR0175 compliant steel body
Rodless Electro-mechanical Actuators
- Tolomatic offers rodless electro-mechanical actuators in both screw and belt driven designs with a wide variety of bearing styles and options.
MXE-S Screw Actuators
-
The MXE-S electric linear screw actuator with a solid bearing design reduces stress concentration for optimal performance.
The MXE-S electric linear screw actuator is designed for applications requiring moderate load carrying and guidance. The MXE-S actuator utilizes two field replaceable solid bearings that optimize stress distribution for optimal performance.
- Large bearing surface contact area optimizes stress distribution on bearing for long service life
- Large carrier mounting pattern for more load stability and compatibility
- Engineered bearing material does not require additional lubrication
- Field replaceable bearings
MXB-U Unguided Belt Driven Actuators
-
MXB-U belt driven actuators are designed for applications where loads are externally guided and supported.
The MXB-U belt driven actuator is a pre-assembled compact linear belt solution for use in applications where higher speeds are desired but loads are supported by existing guides & supports.
- High speed and acceleration capabilities up to 1200 in/sec2 (30.5 mm/sec2)
- 6 body sizes accommodate a wide range of forces and loads
- Polyurethane belt with steel members resists stretching
- Excellent repeatability, high duty cycle performance
- Choose MXB belt drive for longer strokes than screw drive actuators
MXE-P Screw Driven Actuators
-
The MXE-P screw driven actuators with profiled rail bearing offers high load and bending moment capacities in a low profile package
The MXE-P screw driven actuator is designed for applications requiring moderate to heavy load carrying and guidance. MXE-P screw driven actuators features a profiled rail system with recirculating ball linear guides for optimal performance.
- Recirculating ball bearings with reduced friction for reliable long life
- High load and bending moment capacities
- Low profile to fit your application
- High prescision bearings feature smooth, low breakaway motion
MXB-P Heavy Duty Linear Actuator
-
MXB-P heavy duty linear actuators with profiled rail bearing support offers high load and bending moment capacities in a low profile package.
The MXB-P heavy duty linear actuator is designed for applications requiring moderate to heavy load carrying and guidance. The MXB-P actuator features a profiled rail system with recirculating ball linear guides and belt drive train for optimal performance and high speeds.
- High speed and acceleration capabilities up to 1200 in/sec2 (30.43 m/sec2)
- 6 body sizes accommodate a wide range of forces and loads
- Polyurethane belt with steel members resists stretching
- Excellent repeatability, high duty cycle performance
- Choose MXB belt drive for longer strokes than screw drive actuators
B3S Ball Screw Linear Actuators
-
B3S ball screw linear actuators have an enclosed ball bearing design that accomodates heavy loads, high bending moments and delivers long service life.
The B3S/M3S ball screw linear actuator is capable of accommodating heavy loads and handling high bending moments with consistent, smooth operation. B3S/M3S ball screw actuators incorporate an enclosed recirculating ball bearing system that eliminates the need for external load guidance. The B3S/M3S ball screw linear actuator delivers repeatability and 100% duty cycle with long service life.
- 3 body sizes
- Ball or acme screw choices
- Load carrying capacities up to 8032 lbf (35.7 kN)
- Strokes up to 179 inches (4,547mm) depending on screw selections
- US customary (standard) and metric (optional) construction
- Mount your motor of choice with Tolomatic's Your Motor Here® program
B3W Linear Belt-Drive Actuators
-
B3W linear belt drive actuators have an enclosed ball bearing design for heavy loads, high bending moments, and long service life.
The B3W/M3W linear belt drive actuator is capable of accommodating heavy loads and handling high bending moments with consistent, smooth operation. B3W linear belt drive actuators incorporate an enclosed recirculating bearing system eliminating the need for external load guidance. The B3W linear belt drive actuator delivers repeatability and 100% duty cycle with long service life.
- 3 body sizes
- Wide urethane-steel belt delivers greater thrust with no stretch
- Load carrying capacities up to 8032 lbf (35.7 kN)
- Strokes up to 292 inches (7,147 mm)
- US customary (standard) and metric (optional) construction
- Mount your motor of choice with Tolomatic's Your Motor Here® program
TKS Precision Linear Actuators for X-Y Tables and Stages
-
TKS precision linear actuators offer a dual profile rail with wide, low profile base ideal for XY tables/stages and XYZ systems.
The TKS precision linear actuator is designed for applications carrying moderate load and requiring high precision in parameters such as flatness, straightness and accuracy. XY or XYZ tables/stages can easily be created using TKS precision linear actuators. Two parallel profiled rails with four recirculating ball linear guides provide consistent and precise performance.
- 4 compact actuators with corresponding screw sizes
- Choice of either acme or ball nuts
- System payloads ranging from 100 to 750 lb (45 to 340.5 kg)
- 12 metric body size screw/nut combinations
- Strokes in any incremental length up to 96 inches (244 mm)
TKB Precision Linear Stages
-
TKS precision linear actuators offer a dual profile rail with wide, low profile base ideal for XY tables/stages and XYZ systems.
The TKS precision linear actuator is designed for applications carrying moderate load and requiring high precision in parameters such as flatness, straightness and accuracy. XY or XYZ tables/stages can easily be created using the TKS Precision Linear Actuator. Two parallel profiled rails with four recirculating ball linear guides provide consistent and precise performance to the TKS Precision Linear Actuator.
- 4 Compact actuators with corresponding belt sizes.
- System payloads ranging from 100 to 750 lb
- Strokes in any incremental length up to 96"
BCS/MCS Rodless Screw Actuators
-
BCS rodless screw actuators are designed for carrying light to moderate loads at a low price.
The BCS rodless screw actuator guidance system uses a patented adjustable carrier bracket that transmits the load to the cylinder body instead of the screw for good tracking, superior load support and controlled minimum friction load. The screw actuator's patented band retention system forms a tight metal-to-metal seal keeping contaminants out.
- 3 actuator body sizes
- Maximum loads range from 60 to 600 lbs (27 to 272 kg) depending on load carrying selection
- Same envelope size as the B3S Series Screw Drive electric cylinder
- 12 U.S. customary screw/nut combinations
- 12 metric screw/nut combinations
- Strokes are available in any incremental length up to 120 inches (305 mm) depending on screw selections
SLS/MLS Electric Linear Slide Actuator
-
SLS series electric linear slide actuators are pre-engineered, load-supporting and compact.
The SLS/MLS series electric linear slide actuator is designed for carrying light to moderate loads on a wide, rigid base. A similar design as our LS pneumatic linear slide, it utilizes a guidance system consisting of two linear guide rods with recirculating ball bearings for stable, smooth and low friction operation.
- Rigid low-profile design is ideal for space sensitive applications
- 1 body size in U.S. customary and metric models.
- Wide actuator base for easy mounting
- Strokes in any incremental length up to 72 inches (183 mm) depending on screw selections
Motors, Drives & Gearheads
- Tolomatic offers both servo and stepper controllers, drivers and motors, plus planetary gearheads for inertia matching or higher torque output at lower speeds.
ACS Servo Drive / Servo Controller and Motors
-
ACS servo drive and controller was designed specifically for creating single axis actuator solutions.
The ACS servo controller/servo drive is compatible with NEMA23 & 34 servo motors which are pre-tuned, making the entire servo system very simple to deploy with any of Tolomatics family of electric actuators.
ACS Servo Drive / Controller basic features include:
- Several modes of operation including; Index move, pneumatic mode, and analog position mode (configurable for voltage and amperage
- Controlled using Modbus RTU Network Mode over RS485 provides infinite positioning capability or configurable digital I/O (24 Vdc Opto-Isolated)(NPN or PNP) for up to 16 move commands
- High current brake output
- Easy to use configuration software knows the actuator mechanics, no need to calculate
ACS Stepper Driver, Controller and Motors
-
The ACS stepper driver and controller creates low cost, easy-to-use actuator and motor control.
The ACS is an extremely easy-to-use, low-cost stepper controller and stepper driver developed specifically for electric actuators. Simply select the configured Tolomatic electric actuator in the driver software to automatically set-up most of the necessary parameters to create motion in the desired linear units (mm or inch). Orderable with Nema 11, 17, 23, and 34 size stepper motors with the option for gearheads, inline brakes and encoders.
Capabilities of the ACS stepper driver and controller include:
- Several modes of operation including; Index move, pneumatic mode, and analog position mode (configurable for 0-10 Vdc or 4-20 mA input)
- Controlled using Modbus RTU Network Mode over RS485 provides infinite positioning capability or configurable digital I/O (24 Vdc Opto-Isolated)(NPN or PNP) for up to 16 move commands
- High current brake output control
- Easy to use configuration software knows the actuator mechanics
ACSI Integrated Servo Motor/Drive/Controller
-
ACSI integrated servo motor/drive/controller
The ACSI servo motor/drive/controller is available with several control options: EtherNet/IP, PROFINET, ModbusTCP and Basic (Digital or Analog I/O). Ordered with a Tolomatic electric actuator, Tolomatic will mount, configure and test the entire assembly creating an easy-to-use, all-in-one actuator control system.
The ACSI integrated servo motor/drive/controller offers these features:
- Nema-23 and Nema-34 frame sizes
- 10Vdc to 60Vdc input supply
- Dual Ethernet ports supports star, daisy chain and ring topologies
- IP65 rating
ServoWeld® Resistant Spot Welding Actuators
- ServoWeld® GSWA Series servo actuators are used in servo resistance spot welding for robotic applications. They combine servo motor technology in a powerful high-force actuator for a compact profile and faster resistant spot weld cycles—perfect for automotive body-in-white spot welding applications.
GSWA 33 & 33 Guided ServoWeld® Resistance Spot Welding Servo Actuators
-
ServoWeld® GSWA33 Series spot welding actuators offer a compact size, lighter weight and enclosed anti-rotate assembly.
The ServoWeld® GSWA 33 series actuator is a compact, highly efficient alternative to pneumatic welding actuators. When used in P- (pinch), C- , X-guns or Euro gun robotic spot welding applications, they provide faster spot weld cycles and higher quality, more repeatable welds than pneumatic robotic spot welding equipment. GSWA spot welding actuators integrates a hollow core servo motor for efficient, repeatable high force in three different model designs. The actuators support multiple weld schedules and easily accommodate different materials and material thicknesses.
GSWA33 spot welding actuators offer:- 10+ million cycles
- No forced air or water cooling required
- Elimination of couplers, adapters, belts and gears
- Maintenance free service life
- Ball or roller screw selections
- Replacement for numerous pneumatic cylinder configurations
GSWA 44 & 04 ServoWeld® Spot Welding Servo Actuators
-
ServoWeld® GSWA 44 and 04 Series spot welding actuators offer faster spot weld cycles with the highest force and efficiency.
The ServoWeld® GSWA 44 and 04 Series spot welding actuator for spot weld guns provide peak thrusts of 3,300 lbf (14,679 N) while maintaining the smallest possible profile.
GSWA 44 and 04 spot welding actuators offer:- 10+ million cycles
- No forced air or water cooling required
- Elimination of couplers, adapters, belts and gears
- Maintenance free service life
- Ball or roller screw selections
- Replacement for numerous pneumatic cylinder configurations
- 3-phase, brushless servo motor with skewed windings, for reduced cogging and high force repeatability
- Integration for 7th axis operation with most global robot manufacturers
SWA/SWB ServoWeld® Integrated Servo Spot Welding Actuators
-
ServoWeld® SWA & SWB integrated servo spot welding Actuators offer light weight with high performance
Tolomatic's ServoWeld family of lighter weight integrated servo motor actuators for resistance spot welding (RSW) provide a cost-effective actuator design and best-in-class performance. SWA/B actuators provide users the lowest lifetime cost (lowest cost per spot weld) by providing the highest quality welds (best force repeatability) combined with the longest lasting actuators. ServoWeld SWA/B integrated servo spot welding actuators are highly efficient and the broad product family has may choices to optimize weight and performance.
SWA/SWB integrated servo motor actuators offer:- 20+ million cycles for SWA models and 10+ million cycles for SWB
- Standard roller screw with highest dynamic load rating for more welds over competing roller screws, ball screws or pneumatic actuators
- Skewed motor windings designed for welding minimizes motor cogging for the best force repeatability
- Light-weight actuator design
- Forces to 4,000 lbf (17.8 kN)
- Optional water cooling
Pneumatic Linear Actuators
- Tolomatic pneumatic linear actuators include space-saving rodless pneumatic linear actuator designs in band-type, cable and magnetically coupled air cylinder styles. Rod-style Power-Block™ pneumatic linear actuators or thrusters are perfect for short stroke applications.
Rodless Pneumatic Air Cylinders
- A rodless pneumatic air cylinder can guide and support a load throughout the entire stroke length of the cylinder making them a great choice over rod-style air cylinders for longer stroke applications where saving space is a concern.
MXP-N Internal Bearing Compact Air Cylinders
-
MXP-N internal bearing compact air cylinder is a low-cost solution for applications requiring limited loads and bending moments.
The Tolomatic MXP-N internal bearing compact air cylinder offers a space-saving design over typical rod type air cylinders.
- Lowest breakaway pressure of the MXP line of cylinders
- Perfect for use in vertical applications
- Permanently lubricated internal bearing for reduced maintenance
MXP-S Long Stroke Pneumatic Air Cylinder
-
MXP-S Solid bearing pneumatic air cylinder is available in long strokes (up to 206 inches).
The Tolomatic MXP-S solid bearing long stroke pneumatic air cylinder offers a large carrier mounting pattern for load stability.
- Large bearing suface contact area minimizes wear for long service life
- Engineered bearing material does not require additional lubrication
- Solid bearings are field replaceable for easy service
- Higher Mx moment capacity than the Tolomatic BC2 band cylinder
MXP-P Profiled Rail Air Actuator
-
MXP-P air actuator with profiled rail provides high load and bending moment capacities.
The Tolomatic MXP-P profiled rail air actuators offer the highest load carrying capacity of the MXP actuator line (over 1200 lbf or 5745 N).
- Recirculating ball bearings reduce friction for long, reliable life
- Low profile, space-saving design
- Smooth, low-breakaway motion
BC3 Heavy Duty Pneumatic Actuators
-
The BC3 heavy duty pneumatic actuator is specifically designed for large load carrying capacities.
BC3 heavy duty pneumatic actuators employ a recirculating ball bearing system capable of handling large off-center loads with consistently smooth motion.
- Low breakaway pressure
- High moment load capacities
- Cost-effective alternative to auxiliary rail systems
BC2 Pneumatic Band Cylinder
-
The BC2 pneumatic band cylinder, Tolomatic's first band-type cylinder design, continues to be a solid performer for a wide variety of pneumatic applications.
BC2 pneumatic band cylinders provide multiple mounting options for both vertical and horizontal applications and offer low to moderate load carrying capacities.
- Rubber dust band sealing design does not attract metal particulates making the BC2 a good choice for welding powder metal pressing or metal grinding applications
- Adjustable cushions for smooth deceleration
- Adjustable load carrying bracket provides true tracking and load support
- Maximum flexibility and versatile horizontal and vertical mounting
LS Pneumatic Linear Slide
-
The LS pneumatic linear slide offers a rigid, torque-resistant low-profile design for increased torsional stability and mounting flexibility
Tolomatic LS pneumatic linear slides are an excellent choice for X-Y configurations or for applications where space constraints are are a factor.
- Large mounting area for high load stability along the entire stroke of the slide
- Bearing design offers low friction and long wear
- Integrated end-of-stroke adjustment
LC100 Low Cost Band Cylinders
-
The LC100 low-cost cylinder requires externally guided load support
The LC100’s low-cost band cylinder design makes this product especially affordable for large OEM applications that use a guided and supported load with shock absorbers or external cushions. This cylinder works best in applications such as opening and closing doors, automating factory assembly lines, and providing primary control for long stroke applications.
- Space saving
- Lightweight
- Low breakaway
- Simple construction
- Stroke lengths to order
Double-Acting Pneumatic Air Cylinders
-
The Tolomatic double acting pneumatic air cylinder offers the widest variety of sizes and options
Double acting pneumatic air cylinders offer a cost savings over rod cylinders when strokes exceed four feet and provide a versatile space-saving design.
- Strokes up to 60 feet (1524 mm)
- 9 different bore sizes from 1/2 to 5 inches (13 to 127 mm)
- Optional auto tensioners keeps cable rigid and extends cable and gland seal life
- 3-ported heads for convenient connection
- Aluminum tube standard; steel option available for strength
- Caliper disc brake option for additional holding force in vertical applications
Single Acting Pneumatic Air Cylinders
-
The Tolomatic single acting pneumatic air cylinder provide a cost saving advantage over double acting cylinders.
Ideal for vertical lifting applications, single acting pneumatic air cylinders can be positioned horizontally and still achieve a vertical movment.
- 8 different bore sizes from 3/4 to 5 inches (19 to 127 mm)
- Optional 3-ported heads for convenient air connection
- Other options include steel tube, Viton® seals and switches
Double Purchase Pulley Actuators
-
Double Purchase pulley actuators double stroke lengths up to 120 feet (36.5 m) without increasing space requirements.
The Tolomatic double purchase pulley actuator can double the stroke and velocity of a double acting cable cylinder with considerable cost-saving advantages. Double purchase pulley actuators can also be operated when placed away from hostile environments where motion is required.
- Bore sizes from 1.5 to 4 inches (38 to 101 mm)
- Aluminum or steel tube
- Optional 3-ported heads for convenient air connection
- Other options include auto tensioner, caliper disc brake, Viton® seals and switches
Track Cable Cylinders
-
Track cable cylinders provide a pre-engineered guide and support system.
A track cable actuator's guide and support system can offer greater bearing surface than other types of cable cylinders and carry larger loads.
- Aluminum bearing block guides and support loads
- Precision linear ball bearings with hardened ground steel shafts
- Bore sizes from .5 to 1 inch (13 to 25.4 mm)
- Aluminum or steel tube
- Optional 3-ported heads for convenient air connection
- Other options include auto tensioners, caliper disc brake, Viton® seals and switches
MG Magnetic Linear Cylinders
-
Magnetic cylinders are an excellent choice for applications with environmental concerns.
The MG magnetic linear cylinder has no mechanical connection of the carrier to the piston resulting in easy rotation of its mounting block for mounting flexibility.
- 3 magnetic coupling strengths for a maximum of 100 lbs (45.4 kg)
- Field repairable design minimizes downtime
- Fully enclosed actuator body for contaminant prevention
MGS Magnetic Linear Slides
-
The MG magnetic linear slide provides exceptional rigidity in a low-profile design
Like the MG cylinder the MGS magnetic linear slide has no mechanical piston connection resulting in easy rotation of its mounting block for mounting flexiblity. Block heads are multi-ported for flexible air connection.
- Coupling forces to 70 lbs (31.8 Kg)
- Choice of precision linear ball or sintered bronze bearings
- End-of-stroke deceleration adjustment
Power-Block Pneumatic Linear Thrusters
- Tolomatic linear thrusters can withstand heavy side loading making them good choices for conveyor line stops and short stroke load lifting applications.
Power-Block Pneumatic Linear Thruster
-
The Power-Block pneumatic linear thruster features two precision steel guide rods with composite bearings to provide positive load support.
Loaded with standard features, the Power-Block pneumatic linear thruster is the ideal solution to a wide variety of short-stroke applications. Use alone or in conjunction with other Tolomatic linear actuators.
- Force output up to 120 lbs (534 N)
- Maximum stroke of 3 inches (76 mm)
- Durable and tough lightweight extruded aluminum design offers low profile
- Options include stop collar/bumper kit, dual tooling plates and switches
Power-Block 2 Guided Air Cylinders
-
The Power-Block 2 guided air cylinder offers stroke lengths up to 6 inches (154.2 mm) and thrusting capabilities over 800 lbs.
Tolomatic Power-Block 2 guided air cylinders provide increased power over the Power-Block series of thrusters. The longer stroke capablities make them good choices for a variety of pick-and-place and material handling applications.
- Choice of linear ball or composite bearings
- Six bore sizes for a wide range of force output capabilities
- Available with Reed, Hall-effect or Triac switches
Power Transmission
- Tolomatic's line of industrial power transmission products which includes gearboxes, brakes and clutches have over 60 years of proven performance in a wide variety of industrial applications.
Industrial Caliper Brakes
- Tolomatic manufacturers industrial brakes in pneumatic, hydraulic, mechanical, hydraulic/mechanical combinations and spring applied caliper brake models.
Industrial Pneumatic Cone Clutches
- The pneumatic cone clutch is often used with Tolomatic caliper brakes and gearboxes for complete power tranmission control in OEM machines and automated assembly lines.
Industrial Gearboxes
- Tolomatic offers two lines of industrial gearboxes: The Slide-Rite® industrial gearbox and the Float-A-Shaft® industrial gearbox. Our gearboxes can turn power around any corner.