Videos
Loading the player ...
  • Offer Profile
  • Thanks to over 30 years of experience in the development and building of manipulators we were able to introduce new technical features to correct and remove some troubles that this kind of equipment can have, satisfying always more the expectations of our costumers.

    Atis manipulators special features are:
    • Easy to move
    • Maximum precision
    • High security standards
    • High productivity
    • Avoiding damage to the
    • products
    • Customized solutions for any product
Product Portfolio
  • ATISmirus

  • ATISmirus – an articulated rigid arms pneumatic manipulator with parallelogram for vertical movements, designed for maximum precision in load handling. It is most suitable for handling offset loads in every direction without hindrance, but with ease and precision.

    These manipulators can be supplied with bespoke gripping tool, designed to meet the customer's specific requirements. The bespoke gripping tool comes with either manual or pneumatically powered movements that allows execution of load handling cycle.

    ATISmirus series are appropriately defined to meet customer's requirements, suit the chosen tooling head and render load handling easy for operator to carry out.

    Our engineering design team of experts made load handling easier and functionality of the system is operator friendly became the priority and emphasis were placed, from onset, on the operator’s requirements. These are fundamental elements, of technical specification of the product to handle, that are taken account of by our engineering personnel.

    ATISmirus pneumatic industrial manipulators with parallelogram are available in different configurations such as:
     
    • Fix to floor base-plate column mounted
    • Auto-stable base plate column mounted
    • Fixed overhead
    • Overhead trolley mounted on tracks

    ATISmirus pneumatic industrial manipulators do not require an electrical power supply, but only 5-7 bar (73 to 116 psi) of compressed air. This implies that installation time is drastically reduced and certainly the setting-up of the working area is simplified and brief.
      • ATISmirus 80

      • Pneumatic Manipulator with swivel rigid arms, the smallest one of its category. Developed for handling light products even special shaped, is ideal for elevated working cycles.

        Lightness, precision and agility are the main features of this manipulator. It can be completed with custom made gripping tools, designed and studied according to specific customer's requirements: pneumatic grabs, suction cups, special hooks and many more.

        TECHNICHAL CHARACTERISTICS
        Operation: pneumatic only
        Transmission: through a parallelogram and terminal arm
        Configuration : - column mounted fixed to the floor
        - column mounted on self standing base plate
        - fixed overhead
        - overhead on rails
        Net capacity:  115 Kg * (2100 mm radius)
        Radius max:  3100 mm* (range 60 kg)
        Radius min:  400 mm
        Vertical stroke: 1250 - 1500 mm
        Supply:  from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
        Column axle: 360° continuous rotation
        Intermediate axle: max 300° rotation
        Noise level: <70 dB
      • ATISmirus 100

      • Pneumatic rigid arm manipulator with swivel arms, the right compromise between capacity and agility. Ideal for handling medium weights, gives its best adapting to many common working situations.

        Completed with a specific gripping tool it gives the opportunity to handle even offset products in any direction without big effort.




        TECHNICAL CHARACTERISTICS
        Operation: pneumatic only
        Transmission: through a parallelogram and terminal arm
        Configuration : - column mounted fixed to the floor
        - column mounted on self standing base plate
        - fixed overhead
        - overhead on rails
        Net capacity: 180 Kg * (2900 mm radius)
        Radius max: 4000 mm* (range 100 kg)
        Radius min:  400 mm
        Vertical stroke: 1500 - 1750 - 2050 mm
        Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
        Column axle: 360° continuous rotation
        Intermediate axle: max 300° rotation
        Noise level: <70 dB
      • ATISmirus 200

      • Pneumatic manipulator with swivel rigid arms, is the higher capacity model of ATISmirus 100. Developed with the same technical and structural characteristics, is equipped with additional pneumatic cylinder to obtain higher capacities and longer radiuses.

        Also this manipulator can be integrated with a customized gripping tool to comply with customer's needs.


        TECHNICAL CHARACTERISTICS
        Operation: pneumatic only
        Transmission: through a parallelogram and terminal arm
        Configuration : - column mounted fixed to the floor
        - column mounted on self standing base plate
        - fixed overhead
        - overhead on rails
        Net capacity: 260 Kg * (2450 mm radius)
        Radius max: 3250 mm* (range 180 kg)
        Radius min:  400 mm
        Vertical stroke: 1500 - 1750 - 2050 mm
        Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
        Column axle: 360° continuous rotation
        Intermediate axle: max 300° rotation
        Noise level: <70 dB
      • ATISmirus 300

      • Pneumatic Manipulator with articulated rigid arms, is the solution for higher capacities. Designed for increased performance and capacity, always fulfils highest accuracy and ergonomics, even in the most critical conditions.

        Reliability and safety with bulky and heavy loads makes this model the right choice for heavy industry, while our technical experience completes it with customized gripping tools to comply with customer's requirements.

        TECHNICAL CHARACTERISTICS
        Operation: pneumatic only
        Transmission: through a parallelogram and terminal arm
        Configuration : - column mounted fixed to the floor
        - column mounted on self standing base plate
        - fixed overhead
        - overhead on rails
        Net capacity: 440 Kg * (2450 mm radius)
        Radius max: 4400mm* (range 200 kg)
        Radius min:  400 mm
        Vertical stroke: 1500 - 1750 - 2050 - 2300 mm
        Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
        Column axle: 360° continuous rotation
        Intermediate axle: max 300° rotation
        Noise level: <70 dB
      • ATISmirus 500

      • Pneumatic rigid arm manipulator with swivel arms, is the evolution of the previous model with higher capacity. Provided with improved technical and structural features, it is equipped with an enhanced cylinder in order to handle very heavy loads and to achieve longer radiuses.

        Customised gripping tools are developed according to customer's requests and the higher capacity allows even more specific personalization.


        TECHNICAL CHARACTERISTICS
        Operation: pneumatic only
        Transmission: through a parallelogram and terminal arm
        Configuration : - column mounted fixed to the floor
        - column mounted on self standing base plate
        - fixed overhead
        - overhead on rails
        Net capacity: 600 Kg * (2700 mm radius)
        Radius max: 4000mm* (range 300 kg)
        Radius min:  400 mm
        Vertical stroke: 1500 - 1750 - 2050 - 2300 mm
        Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
        Column axle: 360° continuous rotation
        Intermediate axle: max 300° rotation
        Noise level: <70 dB
    • ATISacer

    • ATISacer – Series of pneumatic manipulator with steel cable actionable by pneumatic power.

      These manipulators can be supplied with bespoke gripping tool, designed to meet the customer's specific requirements. The bespoke gripping tool comes with either manual or pneumatically powered movements that allows execution of load handling cycle.

      Appropriately designed, taking account of load capacity, working radius and suitable gripping tool, to render load handling easier for operator to carry out.

      Each gripping tool, from ATIS, is unique and it is designed inline with the company’s philosophy, which is “adapt to customer’s request and be certain that gripping tool design meets all points on the technical specification of product to handle and not neglecting the operator’s needs as well”.

      ATISacer pneumatic industrial manipulators are available in different configurations such as:
       
      • Fix to floor base-plate column mounted
      • Auto-stable base plate column mounted
      • Fixed overhead
      • Overhead trolley mounted on tracks

      ATISacer pneumatic industrial manipulator runs on compressed air of 5-7 bar (73-116 psi).
        • ATISacer 55

        • Like all ATISacer manipulators, ATISacer 55 is provided with double wire rope trasmission system combined with a pneumatic cylinder.
          ATISacer 55 is the smallest of the family, light and easy to handle for loads up to 50 Kg.; it allows the handling of many kind of products in easy and safe way, thanks to the special gripping tools that can be integrated.
          To grant most safety ATISacer 55 works with double rope, it's furthermore provided with load and no-load balancing system. The operator acts directly on the product or on the tool, with high precision and without effort.
          If needed ATISacer 55 manipulator can be provided with a "sensitive" handle, which allows to operate on variable weight products just acting on it. Also this manipulator can be installed on column, both mounted fixed to the floor and on transportable self standing base, or overhead fixed or on rails.

          TECHNICAL CHARACTERISTICS
          Operation: pneumatic only
          Transmission: double rope system
          Configuration : - column mounted fixed to the floor
          - column mounted on self standing base plate
          - fixed overhead
          - overhead on rails
          Net capacity: 55 Kg *(2500 mm radius)
          Radius max: 1600 mm
          Radius min:  400 mm
          Vertical stroke: 1500 - 1750 - 2050 - 2300 mm
          Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
          Column axle: 360° continuous rotation
          Intermediate axle: max 300° rotation
          Noise level: <70 dB
        • ATISacer 80

        • ATISacer 80 is the newest member of ATISacer family, provided with double rope system and pneumatic cylinder. It completes the range of ATIS' rope system manipulators.
          The pneumatic system of the manipulator allows balanced movements, both with and without load. Integrated with standard hook or with special gripping tools ATISacer gives its best in small and constricted working areas.
          The manipulator is provided with certified accumulation tank to allow the operator to carry out the handling process in case the main air supply fails. It's furthermore provided with double safety ropes. It mounts also double braking pads on the main axle and on medium joint as well.
          ATISacer 80 turns out very easy to handle, lightweight and quick-moving.

          TECHNICAL CHARACTERISTICS
          Operation: pneumatic only
          Transmission: double rope system
          Configuration : - column mounted fixed to the floor
          - column mounted on self standing base plate
          - fixed overhead
          - overhead on rails
          Net capacity: 80 Kg *(3100 mm radius)
          Radius max: 4000 mmspan>
          Radius min:  400 mm
          Vertical stroke: 1800 mm
          Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
          Column axle: 360° continuous rotation
          Intermediate axle: 300° rotation with mechanical stop
          Noise level: <70 dB
        • ATISacer 150

        • ATISacer 150 is the biggest of ATISacer family, provided with rope system and pneumatic cylinder. The pneumatic system of the manipulator allows balanced movements, both with and without load. Integrated with standard hook or with special gripping tools ATISacer gives its best in small and constricted working areas.
          The manipulator is provided with certified accumulation tank to allow the operator to carry out the handling process in case the main air supply fails. It's furthermore provided with double safety ropes. It mounts also double braking pads on the main axle and on medium joint as well.
          ATISacer 150 turns out very easy to handle, lightweight and quick-moving

          TECHNICAL CHARACTERISTICS
          Operation: pneumatic only
          Transmission: double rope system
          Configuration : - column mounted fixed to the floor
          - column mounted on self standing base plate
          - fixed overhead
          - overhead on rails
          Net capacity: 55 Kg *(2500 mm radius)
          Radius max: 1600 mm
          Radius min:  400 mm
          Vertical stroke: 1500 - 1750 - 2050 - 2300 mm
          Supply: from 0.5 to 0.8 MPa of clean, dry and oil free compressed air
          Column axle: 360° continuous rotation
          Intermediate axle: max 300° rotation
          Noise level: <70 dB
      • ATISlinear

            • ATISlinear

            • ATISlinear manipulators are able to handle load s in both vertical and horizontal orientations, thanks to the forceful vertical movement and attachment, with the aid of steel plate flange, to trolley mounted on overhead tracks.

              ATISlinear manipulators are compact and ideal for applications in all restricted working areas.

              Thorough study and analysis of manipulator, during design stage, coupled with our design engineers years of experience brought about this exceptionally sensitive manipulator capable of formidable efficiency in any onerous condition.

              ATISlinear manipulators can be supplied with bespoke gripping tool, designed to meet the customer's specific requirements. The bespoke gripping tool comes with either manual or pneumatically powered movements that allows execution of load handling cycle.
        • ATISferax

        • ATISferax – lever actionable manipulators with vertical movement and ability to handle load extremely well and precise in any direction.

          These are extraordinarily lightweight manipulators, with minimum resistance to change of movements, undoubtedly optimise the most extreme cycle time requirement and notably reduce the stresses on operators.

          ATISferax is a unique manipulator of its kind, one of many INNOVATIONS by ATIS in this area:
           
          • as a result of our experience
          • as a result of desire to always propose the best solutions to our customers
          • as a result of continuous research & development

          ATISferax manipulators can be supplied with bespoke gripping tool, designed to meet specific requirements. The bespoke gripping tool comes with either manual or pneumatically powered movements that allows execution of load handling cycle.

          ATISferax manipulators are available in different configurations such as:
           
        • Fix to floor base-plate column mounted
        • Fixed overhead
        • Overhead trolley mounted on tracks