SMW-AUTOBLOK offers a comprehensive portfolio of work holding solutions for Automotive, OCTG, Industrial equipment and Aerosopace. A modular system of standard products allows the flexible use for different applications.
All our high quality standard products are in stock, and thus offer a quick availability.
We develop, produce and distribute our sytems with passion worldwide.
SRG | SRG-B:
High precision grinding Steady Rests
Grinding diameter Ø 3 - 126 mm
■ Fine adjustment of the grinding center
■ Retractable arms
■ Suitable for follow-down grinding
■ High rigidity
High precision air chucks
Chuck sizes Ø 80 - 250 mm
■ For OD and ID clamping
■ Built-in pneumatic actuation
■ For universal grinding applications
High precision 4 jaw chuck
■ 2+2 jaws independently operated
■ Hydraulic actuation
■ Quick change center or adjustable
■ For grinding
■ Fully sealed and low maintenance
D | D-Kombi | D-Plus | D-Vario:
Chuck sizes Ø 210 - 400 mm
■ Diaphragm technology for highest precision
■ External or pitchline clamping
■ With or without open center
High precision face drivers
for machining between center pins
■ Machining of the entire surface of the workpiece with one single operation
■ Power operated on the side of the spindle
■ Highest run-out accuracy
Pneumatic pancake cylinder for diaphragm
chuck D-VARIO and face driver FDG
■ Easy installation for grinding and turning machines without hydraulic unit
■ Operating pressure 2-8 bar
■ Medium feed for air / coolant
Segment sleeve mandrel
Clamping diameter Ø 18 - 105 mm
■ For ID clamping
■ Very rigid design
With the new APS zero point clamping system, users can reduce set-up times by up to 90%.
The APS zero point clamping system can be used in all operations such as turning, milling,
measuring, eroding or grinding. This means users benefit from significantly reduced costs due
to reduced set-up times while increasing the availability of machines throughout the production line.
3 different ranges – Basic, Premium and Top – offer optimum solutions for all application requirements.
Cennectable fl exible zero point clamping module, Fully sealed
Manual Zero Point Clamping System for the Workpiece Direct Clamping
Single quick-actuation for the rapid opening and closing, Fully sealed
Thanks to the SinterGrip clamping inserts, it is possible to clamp workpieces safe with a clamping
depth of just 3.5 mm, so the workpiece can be completely machined in a single operation.
This reduces the cost of materials, particularly where raw material costs considerably influence
the piece price. SinterGrip also optimizes the performance of the machine and tools: faster cutting
and feeding speeds mean larger cutting volumes and shorter machining times for each workpiece.
In addition, production steps required until now, such as workpiece pre-marking, are no longer
necessary. Eliminating the pre-marking process reduces investment costs and saves on upstream
processing costs. Considerable time is also saved as the workpiece, it can be clamped immediately
by eliminating upstream processes.
The triangular insert with pyramidal teeth penetrates into the material, creating a positive fit
between the clamp and the workpiece. The forces and vibrations generated during machining
are evenly distributed and absorbed.
SinterGrip comes in 3 different versions for different materials: steel, hardened steel
(up to 54 HRC)/titanium and aluminium/plastic. SinterGrip is compatible with all commonly
available types of vices and clamping devices.
5-Axis Machine Tools ensures the following advantages:
Fully sealed – protected spindle, Centrical clamping
The GTO stationary chuck for standard collets is particularly impressive, above all due to its high
gripping force, accuracy and rigidity.
Lateral bearing surfaces also allow the chuck to be mounted vertically or horizontally. Profitability
is increased due to considerably reduced set-up times since collets can be changed very quickly.
Thanks to its extremely compact design, the GTO is ideal for 5-axis machining.
Power vices can be pneumatic, hydraulic or spring actuated, self-centering or with a fixed jaw.
In addition, two different jaw strokes are available: a standard stroke for maximum clamping forces
and a long stroke for extended jaw strokes. The highly compact power vices make it possible to
determine the jaw position and control the workpiece support (SL type). This makes them ideal
for automation or for Industry 4.0 applications.
SMW-AUTOBLOK offers two different multiple clamping systems: CV with serration 2.5 x 60° and TB with
serration 2.0 x 60°. Both of these multiple clamping systems come with different jaw widths and lengths.
For the CV system, the "CLAK-SYSTEM" quick change system for jaws and parallels is available as an option.
The user can also clamp safe raw parts using jaws fitted with SinterGrip clamping inserts (see photo).
The intelligently designed modular system of the RT tombstones offers an extended product range
with the shortest possible delivery times. The tombstones can also be individually equipped with a
wide variety of stationary clamping systems and delivered ready for operation. Suitable geometries
offer optimum accessibility to the machine spindle with the highest accuracy and precision.
The RT tombstones are available in steel (hardened steel if required), cast iron or aluminium
version and offer maximum rigidity and excellent vibration damping. The clamping areas are pre-milled,
fine milled or provided with a grid bore holes, depending on the customer's requirements. In addition
to the extensive catalogue, special sizes with short delivery times are also available upon request.
The RT tombstones are suitable for standard machines according to DIN 55201 or JIS 6337-1980.
The wide range of accessories guarantee the flexible use of the vices.
Also the clamping by using SinterGrip clamping inserts is possible as a standard.
For the actuation of standard power chucks on mill-turn centers
Modular construction kit : customizable to customer requirements
2+2 self centering, Independent self centering clamping in 2 axis, Weight-optimized chuck body
2+2 self centering, Independent self centering clamping in 2 axis, Centrifugal force compensation
Electro-mechanical tombstone with integrated drives
Electro-mechanical universal 4-jaw chuck
Weight optimized electro mechanical patented universal 4-jaw chuck
KNCS-2G: Quick jaw change
Power chuck sealed with quick jaw change
Ø 170 - 630 mm
Large through hole
Protection against dust and swarf
High flexibility: jaws radially adjustable/ reversible
Revolutionary steady rest
with innovative technology
Extra compact design with smallest outside dimensions
Large clamping range
Integrated coolant flush
Highest repeatability and centering accuracy
Linear stroke control
KNCS-matic: Quick jaw change
Automatic quick jaw change
Ø 210 - 630 mm
Fully automatic set up with robot for
Standard KNCS-N jaws can be used