Stork IMM
Videos
Loading the player ...
- Offer Profile
- You probably know us as a
manufacturer of moulding machines, but there's so much more to be said! In
this section of our website you will find information about past, present
and future.
Stork IMM develops, produces and maintains top quality injection moulding machines for markets where production speeds and reliability are crucial factors in the business model.
Stork IMM distinguishes its self by offering a product line for each application.
Product Portfolio
PLUS-LINE
-
The high standards of the Plus-line
Fifty years of experience in developing and producing injection moulding machines have culminated in the Stork Plus-line. The machines from this line offer solutions for most companies in the injection moulding business. Because of its high production speed, the Plus-line is eminently suitable for thin-walled applications. Nevertheless, the heavy-duty design is also much appreciated in other markets due to its long lifetime and low costs of ownership (TCO). Plus-line: the fastest and most reliable machines
-
The Stork injection units are characterized by screws with high l/d ratios and high circumferential speeds. It makes them highly suitable for short cycle-times. Stork uses extremely stiff platens for symmetrical filling at minimum clamping force. The linear rail guidance of the movable platens distinguishes itself by its sturdy construction. Stork uses a robust toggle system which guarantees the shortest dry-cycle time at the lowest energy consumption. Stork also supplies fully electric machines, 2K units in different sizes and arrangements, IML technology, robots and other automation possibilities. Stork offers turn-key solutions in co-operation with the highest reputed suppliers.
- Robust rail guidance
- The lowest energy consumption
- 2K-Unit
- Massive steel platens
- Air ejector
- Highest injection speeds
- Electrical drives
POT-LINE
-
Particulars of the potline
The regrind material used for flowerpots is often heavily contaminated. This causes mould damage and down-time. The large sized Stork melt filter prevents this and has a positive influence on the process. Stork offers a wide choice in drive systems which enables us to offer you always the fastest and most energy efficient machine. Extremely thin-walled flowerpots require extremely high injection speeds. The Stork Pot-Line combines an extremely high injection speed with a fast and accurate switch-over to holding-pressure. Potline: injection moulding machines for the production of flowerpots
-
Special screws with high l/d ratios are ideal for homogeneous plasticizing of regrind material. Extremely high circumferential speeds make these wear resistant screws highly suitable for short cycle-times. Our high-flow air-valves with separate adjustment of flow and pressure guarantees the shortest drop-out time. The fast and accurately reacting mould safety provides an excellent protection for your valuable mould. Stork uses extremely stiff platens for symmetrical filling at minimum clamping force.
- Increasing pitch barrièrscrew
- Air ejector
- Large melt-filter
- Massive steel platens
- Highest injection speeds
FOOD-LINE
-
Focus on the foodline
The production of containers for the food-industry requires maximum hygiene. The Stork Food-Line can also be lubricated with food-grade oil and lubricants. Stork uses extremely stiff platens for symmetric filling and minimum clamping force. Stork offers a wide choice in drive systems which enables us to offer you always the fastest and most energy efficient machine. Foodline: injection moulding machines for the production of food packaging
-
Extremely thin-walled food packaging requires extremely high injection speeds. The Stork Food-Line combines an extremely high injection speed with a fast and accurate switch-over to holding-pressure. Stork also supplies fully electric machines. Stork electric drives are distinguished by a robust rack and pinion drive that allows for the highest speeds. The rack and pinion drive has proven to be the most reliable drive. Injection moulding machines are often part of a production cell. Stork offers turn-key solutions in co-operation with the highest reputed suppliers.
- Food-grade applications
- Massive steel platens
- Highest injection speeds
- Electrical drives
PAIL-LINE
-
Primary assets of the Pail-Line
The production of containers for the food-industry requires maximum hygiene. The Stork Pail-Line can also be lubricated with food-grade oil and lubricants. Stork offers a wide choice in drive systems which enables us to offer you always the fastest and most energy efficient machine. Thanks to enlarged opening-strokes, IML and take-out is possible in one movement which results in a shorter cycle-time. Pailline: injection moulding machines to produce plastic pails and covers
-
Stork uses a robust toggle system. The toggle system guarantees the shortest dry-cycle time at the lowest energy consumption. Ejecting containers requires a lot of air and perfect timing. The freely programmable high-flow air-valves with separate adjustment of flow and pressure guarantees the shortest demoulding times, resulting in the shortest cycle-times. Pails are increasingly fitted with integrated handles. The 2K unit needed to facilitate this is available in different sizes and arrangements.
- Massive steel platens
- Air ejector
- Highest injection speeds
- 2K-Unit
- Enlarged opening-strokes
CRATE-LINE
-
Charasteristics of the Crate-line
Stork offers a wide choice in drive systems which enables us to offer you always the fastest and most energy efficient machine. Stork offers special wear resistant mixing-screws for perfect distribution of the master-batch and high output. Stork distinguishes itself by always delivering the fastest machine, also in the large machine range (>4400). Crate moulds are often complicated moulds with multiple core-pulling and ejector movements. The free programmable core-puller is extremely user-friendly and makes perfect parallel movements possible, resulting in the shortest possible cycle times. Crateline: injection moulding machines for the production of logistic packaging systems
-
The boost function of the integrated hot-runner switches on extra power during start-up to avoid injection points freezing off. This eases the start-up of these complicated productions. The Stork linear rail guidance of the movable platens distinguishes itself by its robust construction. Logistic packaging systems are increasingly moulded with 2K technology. The 2K unit needed to facilitate this, is available in different sizes and arrangements.
- The fastest machine
- Robust rail guidance
- The lowest energy consumption
- 2K-Unit
- Double pitch mixing screw
2K UNIT E100
-
Stand-alone or fully integrated
The stand-alone Stork E100 vertical injection unit is the optimal solution for fast cycling 2K applications.
The unit is mounted vertically on top of the fixed platen of the injection moulding machine. The position can be adjusted horizontally to the gate position of the mould. E100: all electric injection 2K unit
-
The unit has a sturdy construction. The all electric servo drives provide a fast and precise injection process. This ensures that no hydraulic oil will contaminate the mould area and the operation is very energy efficient.
The unit can operate stand alone, but it can also be integrated seamlessly with Stork IMM machines. In this case, the unit is operated directly from the control of the main machine!
For safety and sequencing, the unit is equipped with two Euromap 67 interfaces. This allows the system to be used in cooperation with side-entry systems. No special adaptions are required for the main machine. Additional signals are provided in the Euromap 67 interface to enable and ensure optimal process injection timing for optimal product quality.
A 19” multi touch screen is mounted for operating and setting the unit. The operation is intuitive and is easy, according the Stork standard look and feel! The IPC control system is fast and uses the EtherCAT fieldbus system.
Stork IMM machines need extra hard- and software to enable the integration features and optimal injection timing.- Stand-alone or integrated
- Fast cycling
- All electric
- Euromap 67 interface
- 19" Multi touch screen
Specification:- E100 type A - D
- Screw diameter mm 25 - 35
- L/D 16 - 20
- Max. injection pressure bar 1100 - 2200
- Injection volume cc 44 - 86
- Injection speed cc/s 122 - 239
USED MACHINES
-
A used machine from Stork... a good idea
Sometimes a new machine is just a step too far. Also for a used injection-moulding machine Stork is your partner. Young or old, whether or not refurbished, with or without guarantee. Everything is negotiable. If you have a specific need, please let us know. We will try to find the right machine for you, using our extensive network. 
Premium Used Machine: S 5500 – 3550
-
Specification:
- Year 2006
- Clampingforce 5500kN
- Openingstroke 850mm
- Distance between tiebars 830x830mm
- Mouldheight 600-1250mm
- Injection 3550 72mm 25 L/D PE2 mixing screw
- Shotvolume (max.) 1547cm³ speed → 2443 cm³/s
Premium Used Machine: S 9000 – 8650R
-
Electrical Screwdrive
Specification:- Year 2006
- Clampingforce 9000kN
- Openingstroke 1100mm
- Distance between tiebars 1010x1010mm
- Mouldheight 300-1190mm
- Centerline machine 1660mm
- Shotvolume reduced (max.) 1886cm3
Premium Used Machine: S 18000 – 31500
-
Specification:
- Year 2005
- Clampingforce 18000kN
- Openingstroke 1650mm
- Distance between tiebars 1470x1450mm
- Mouldheight 500-1600mm
- Centerline machine 1750mm
- Shotvolume (max.) 20994cm3
SERVICE
Skilled engineers
-
All over the world they are there for you! In some countries, we work with well-trained local technicians. Other countries we serve from the Netherlands. In all cases, you are assured of fast and good support.
Always state your machine type and number, that way we can help you as fast as possible!
