KAUP Container spreaders for forklift trucks guarantee efficient handling for all container types. Whether it’s a top spreader, spreader for lateral or frontal pick-up, rigid design or telescopic - KAUP spreaders can be optimally configured for almost any application.
KAUP forklift trucks spreaders ensure maximum handling performance, providing an excellent view of the container corners. This enables the operator to position the spreader quickly and accurately.
KAUP Container Spreaders are variably usable and have proven to be successful in worldwide use since more than 30 years - on ships, port terminals or transhipment stations. Due to the consequently applied modular principle of KAUP they have a very favourable ratio between empty weight and payload and can be adapted without any problems to individual requests concerning load capacity, stroke speed and increasing container sizes.
For centering the view-optimized designed spreader during positioning on a free-standing container the KAUP Container Spreaders are equipped with folding flippers. Depending to the specific need the crane operator can fold them upwards or downwards.
The range of Container Spreaders from KAUP is extremely diverse. But the individual data concerning type, mounting, details of load calculation, data about the transported containers and other technical specifications render Container Spreaders very complex. Therefore it is necessary to contact us directly to adapt container Spreaders to the particular application.
The Fork Positioner T160B - 'e-operated' is a so-called viable study. This attachment does not need even one drop of hydraulic oil. An absolute novelty!
The T160B - 'e-operated' can be used normally. Why? KAUP has been successful in implementing all known functions of a fork positioner electrically - electronically driven: 'e-operated'. In addition, the patented control system with an open interface opens up new communication options for the attachment and forklift truck. The Fork Positioner T160B - 'e-operated': an attachment 4.0.
What makes the Fork Positioner T160B - 'e-controlled' so special? It's not the drive. Because the attachment still uses hydraulic oil, the same as all other other well-known attachments. Rather, the control system of the fork positioner is surprising.
The new control system enables the control and adaption of the sideshift and fork adjusting functions electronically - 'e-controlled'. Thus the maximum permitted sideshift is always available so that the maximum possible load capacity can always be used. The Fork Positioner T160B - 'e-controlled': an attachment 4.0.
Sideshifters are the most common attachments encountered on forklift trucks. Depending on the capacity of the truck Sideshifters allow lateral shift of the load from ± 100 up to ± 160 mm. This saves time and increases manoeuvrability. With the so called Container Sideshifter even larger lateral sideshift stroke is possible.
KAUP has two different versions of Sideshifters in their product range - hook-on version and integrated version.
KAUP Sideshifters can be combined with numerous other KAUP attachments and thus considerable increase the application possibilities.
The demands on material handling tasks are increasingly more complex. KAUP Fork Positioners accommodate these requirements, as they increase the flexibility and profitability with more handling capacity of every forklift truck.
Especially when the width of the load changes constantly. For this reason Fork Positioners are the most frequent attachment found on forklift trucks after sideshifters. And KAUP offers a large variety of Fork Positioners - suitable for every transportation and operational task.
KAUP Fork Positioners are also, in some cases, available as integrated version with even better residual capacity.
KAUP Multi Pallet Handlers significantly rationalise in-plant transportation and are in operation world wide in all branches of industry. They are put into operation where several pallets or other loads are transported simultaneously; therefore KAUP Multi Pallet Handlers contribute to efficient and economical logistics.
The construction consisting of KAUP T-profiles, C-profiles and, depending on the model, round profiles ensures highest stability even under tough working conditions, long operation with extended intervals between servicing and a minimum of required maintenance.
The Rotators of KAUP are the right choice to turn load, to empty container, to tip recumbent load on a palette or to put up a recumbent load. Driven by four possible oil engines and three differently big snail gears running in the oil bath, these attachments can be equipped with fork carriage as well as forks. In addition, they are the base for numerous rotating attachment combination.
Beside the normal versions of his Rotators KAUP also has special variations for the fishing economy and for foundries on offer.
With the Ladle Tipper of KAUP different foundry ladles can be taken up, be transported as well be emptied to the left, on the right and forwards.
The Fork Clamps of KAUP can be used to the transport of palletised good as well as for clamp works.
With different slip-on clamp arms these attachments become special clamps to transport, for example, stones or barrels with few handles.
Combined with other attachments of KAUP the application possibilities of the fork clamps still increase once more.
No matter if it is for the transportation of reusable materials in the recycling industry or loading and unloading of trucks or railway wagons in the paper industry: transportation of non-palletised products and goods makes the most different demands for forklift truck attachments. KAUP's large variety of special clamps always ensures the availability of the right device for the most different material handling tasks in their programme.
Based on a modular construction method all KAUP clamps have an identical robust, view-optimised basic construction of T and C profiles. They differ only concerning the load-carrying capacity and the construction width. Also the combination with suitable rotary units is possible if the application case demands it.