Videos
Loading the player ...
  • Offer Profile
  • For 15 years, POKOLM has been supplying tool systems geared to the needs of industry from one single source. We started as a classic family business in the 80’s. Today, 80 employees work on over 3,000 square meters of operational area. Many of these employees have decades of experience in the manufacture of milling tools. Along with that, the depth of expertise and the modern plants guarantee continuously high quality. And this has a long tradition at POKOLM.
Product Portfolio
  • Milling Cutter Bodies

      • New: Doubletriga universal milling cutter

            • Doubletriga: The state-of-the-art universal milling cutter with 2 x 3 cutting edges per insert for maximum efficiency

            • With Doubletriga, the latest entry in POKOLM's range of milling cutters, POKOLM's engineers have developed a genuine universal state-of-the-art design. Six cutting edges per insert provide maximum efficiency. The advanced geometry guarantees high milling rates and excellent finish quality at the same time. High feed rates of up to fz 1.5 mm are possible. The fully peripherally ground inserts with robust cutting edge profiles and a real corner radius of 3 mm are installed with positive locking and feature a positioning grove to avoid twisting

              • 1.2 mm chamfer for circular finishing
              • 3 mm real corner radius
              • planar chamfer for planar finishing
              • Torx Plus system for long service life of the fastening screw
              • deep chip breaker for minimised chip compression and power consumption
        • Face milling cutters

            • Baseworx®

            • Remarkably economic face milling cutters for highly efficient milling with medium depths of cut.

              These tools stand out on account of their reduced power consumption. These milling cutters can also be used for chamfering.
            • Planworx®

            • Face-milling cutter with maximum chipping depth of 6 mm, negative axial rake angle for square inserts with eight cutting edges. Internal coolant supply up to tool diameter 125mm. Differential pitch for smooth running.
            • Mirroworx®

            • Milling instead of grinding is our slogan for these finishing milling cutters. Developed for producing smooth and levelled surfaces with enormous feed rates. These tools enter into grinding domains.
          • Square shoulder face milling + slotting cutters

              • SLOTWORX® - k90°

              • Outstandingly capable for using on high-speed milling machines and smaller machining centres.
                • the increased no. of teeth allows for very large feed-rates
              • ADEW - k90°

              • These universal milling cutters for machine building and toolmaking are characterized for their low energy consumption.
              • QUADWORX® XL - k90°

                • four cutting edges per insert for extremely efficient operations
                • very big metal removal rates and extremely easy cutting
                • as a standard, every tool has internal coolant supply
                • allows extremely high feed rates per tooth up to fz = 2.8 mm
            • Copy cutters

                • SPINWORX®

                • The all-rounders in the SPINWORX series.
                  • Wide range of uses for almost all areas of application.
                  • With specially adapted primary and secondary coolant supply.
                  • Low power consumption, high chip removal rate.

                  CAUTION! PLEASE NOTE!

                  For optimum results with the SPINWORX®-tooling system we recommend using internal coolant supply air, emulsion or MMS for chip removal in the tool! Wet machining up to max speed Vc of 140 m/min!
                • Cutters for round inserts - k0-90°

                • Tools especially suitable for milling small dies and engraving. The larger number of teeth allows much higher feed rates.
              • Rhombic cutters

                  • Finworx®

                  • Universal milling cutters for finishing and profile milling with small radii.
                    • particularly smooth operating in corners and pockets
                    • extreme economic due to four effective cutting edges
                    • low energy consumption
                  • XDHW | XDHT 06

                  • Universal milling cutters for finishing and profile milling with small radii.
                    • particularly smooth operating in corners and pockets
                    • low energy consumption
                  • XDHW 10

                  • Universal tool for finishing and contour cutting with small radii, size 10 mm
                    • Universal milling cutters for finishing and profile milling with small radii.
                    • particularly smooth operating in corners and pockets
                    • low energy consumption
                • Cutters for non-ferrous materials

                    • VDGT - k93°

                    • These milling cutters are especially suitable for milling aluminium, copper, plastics and graphite. It allows very easy cutting and very high cutting speeds and feed rates. These inserts have a 3° clearance (kappa 93°) - a design specially for milling vertical walls.

                      Only for roughing and pre-finishing operations!
                    • VCGT - k92°

                    • These milling cutters are especially suitable for milling aluminium, copper, plastics and graphite. It allows very easy cutting and very high cutting speeds and feed rates.

                      Only for roughing and pre-finishing operations!
                    • VDGT - k90°

                    • These milling cutters are especially suitable for milling aluminium, copper, plastics and graphite. It allows very easy cutting and very high cutting speeds and feed rates.

                      Only for roughing and pre-finishing operations!
                    • VcGT - k90°

                    • These milling cutters are especially suitable for milling aluminium, copper, plastics and graphite. It allows very easy cutting and very high cutting speeds and feed rates.

                      Only for roughing and pre-finishing operations!
                  • Ball end bull end mill cutters

                      • Uniworx®

                      • Our ball nose and bull end combi end mills provide maximum precision because of both the V-shaped insert seat and because the insert was ground in only one setup. The helix-shaped rake angle allows very easy cutting and extremely smooth operation.

                        Only for finishing and pre-finishing operations.
                      • Waveworx®

                      • This new generation of ball nose end mills was developed especially for roughing of steel:
                        • for roughing, removing residual material and pre-finishing of steel
                        • for deep cavities and low spindle revolutions
                        • two effective cutting edges double its efficiency
                      • Cutters for inserts with 4 cutting edges

                      • The special insert geometry of these tools makes it ideally suited for finishing and pre- finishing operations on modern high-speed milling machines with 5 axes. The advantage of the insert with 4 cutting edges is: it is reversible, thus it doubles its productivity.

                        Optimum cutting conditions can only be achieved with an approach angle of spindle.
                    • High feed rate cutters (HSC)

                        • Quadworx®

                          • four cutting edges per insert for extremely efficient operations
                          • very big metal removal rates and extremely easy cutting
                          • as a standard, every tool has our patent protected incorporated insert seats and internal coolant supply
                          • allows extremely high feed rates per tooth up to fz = 1.5 mm
                        • Trigaworx®

                          • allows extremely high feed rates per tooth up to fz = 1.5 mm
                          • better utilization of insert because of its 3 effective cutting edges
                          • very smooth operation, especially in deep slots or profiles

                          Especially for roughing operations
                        • Slotworx® - k15°

                          • exceptionally suitable for High Feed Machining of hardened materials up to 60+2HRC.
                          • PVTiH Coating well suited for milling of die steels, f.e. 1.2714.
                          • extremely long life time and high running smoothness because of the adapted cutting surface geometry.
                        • Slotworx® HP

                        • Excellent for use on small HSC machines and machining centers.
                          • due to high number of flutes very high feedrates are possible
                          • offers a real corner radius for close contour work
                        • FOURWORX®

                          • Four cutting edges per indexable insert for ultimate efficiency
                          • Very high material removal rates and extremely easy cutting
                          • All tools possess internal coolant supply as standard.
                          • Extremely high feedrates up to fz 1.2 mm/teeth
                      • Solid carbide end mills

                          • End mills for steel universal up to 52 HRC

                              • Ball nose end mills | 2 flutes

                              • 2 flutes, plain shank, 30° right hand helix angle
                                • center cutting end mill
                                • short I long I extra long version
                                • with and without clearance between shank and flute
                              • Toric / corner radius end mills | 2 flutes

                              • 2 flutes, plain shank, 30° right hand helix angle
                                • center cutting end mill
                                • corner radius end mill
                                • short I long version
                                • with and without clearance between shank and flute
                              • End mills | 2 flutes

                              • 2 flutes, plain shank, 30° right hand helix angle
                                • center cutting end mill
                                • straight face
                                • with chamfer
                                • short I long I extra long version
                                • with and without clearance between shank and flute
                            • End mills for steel up to 58 HRC

                                • Ball nose end mills | 2 flutes

                                • 2 flutes, plain shank, right hand helix angle
                                  • center cutting end mill
                                  • ball nose
                                  • with and without clearance between shank and flute up to 20xd
                                  • high precise: r = +/- 0.005 ; d1 = -0.015
                                • Toric / corner radius end mills | 2 flutes

                                • 2 flutes, plain shank, right hand helix angle
                                  • center cutting end mill
                                  • with and without clearance between shank and flute up to 20xd
                                  • high precise r = +/- 0.005 ; d1 = - 0.015
                                • End mills

                                • end mill multiple flutes, plain shank, 50° right hand helix angle
                                  • center cutting end mill
                                  • straight face
                                  • short I long version
                                  • with and without clearance between shank and flute
                              • End mills for steel more than 58 HRC

                                  • Ball nose end mills | 2 flutes

                                  • 2 flutes, plain shank, 15° right hand helix angle
                                    • center cutting end mill
                                    • short I long version
                                    • with and without clearance between shank and flute
                                    • extrem strong core diameter
                                  • corner radius end mill | 5 flutes

                                  • 5 flutes, plain shank, 30° right hand helix angle
                                    • corner radius end mill
                                    • without clearance between shank and flute
                                    • extrem strong core diameter
                                • End mills for micro machining up to 2.5 mm

                                    • Ball nose end mills | 2 flutes

                                    • 2 flutes, plain shank, 30° right hand helix angle
                                      • center cutting end mill
                                      • ball nose
                                      • 3 mm shank-diameter
                                      • short version
                                      • without clearance between shank and flute
                                    • End mills | 2 flutes

                                    • 2 flutes, plain shank, 30° right hand helix angle
                                      • center cutting end mill
                                      • straight face
                                      • 3 mm shank-diameter
                                      • short version
                                      • without clearance between shank and flute
                                  • End mills for stainless steel | titanium alloys

                                      • Toric / corner radius end mills | 4 flutes | uneven cutting pitch

                                      • 4 flutes, plain shank, right hand helix angle
                                        • center cutting end mill
                                        • straight face
                                        • unequal helix angle
                                        • uneven cutting pitch
                                      • End mills | 4 flutes | uneven cutting pitch

                                      • 4 flutes, plain shank, right hand helix angle
                                        • center cutting end mill
                                        • straight face
                                        • unequal helix angle
                                        • uneven cutting pitch
                                    • End mills for aluminium | copper | plastic | synthetic

                                        • Ball nose end mills | 2 flutes

                                        • 2 flutes, plain shank, 30° right hand helix angle
                                          • center cutting end mill
                                          • short I long version
                                          • with and without clearance between shank and flute
                                        • Toric / corner radius end mills | 2 flutes

                                        • 2 flutes, plain shank, 30° right hand helix angle
                                          • center cutting end mill
                                          • corner radius end mill
                                          • short I long version
                                          • with and without clearance between shank and flute
                                        • End mills | 1 flute for aluminium

                                        • single flute, plain shank, right hand helix angle
                                          • polished
                                      • End mills for graphite | GRP | CFRP

                                          • Ball nose end mills | 2 flutes

                                          • 2 flutes, plain shank, 30° right hand helix angle
                                            • center cutting end mill
                                            • short I long version
                                            • with and without clearance between shank and flute
                                            • < Ø 3 mm: PVDiaG-Diamond treated
                                            • ≥ Ø 3 mm: PVDiaN-Diamond
                                          • Toric / corner radius end mills | 2 flutes

                                          • 3 flutes, plain shank, 30° right hand helix angle
                                            • center cutting end mill
                                            • short I long version
                                            • with clearance between shank and flute
                                            • ≥ Ø 3 mm: PVDiaN-Diamond
                                          • End mills | 2 flutes

                                          • X-Cut flutes, for machining graphite and composites, plain shank
                                            • center cutting end mill
                                            • straight face
                                            • 2 cutting face teeth
                                            • without clearance between shank and flute
                                        • End mills for extreme machining | HPC

                                            • 3 and 4 flutes

                                            • 3 and 4 flutes, plain shank, 50° right hand helix angle
                                              • center cutting end mill
                                              • straight face
                                              • short I long version
                                              • without clearance between shank and flute
                                              • < Ø 12 mm clamping surface is available on demand, ≥ Ø 12 mm with clamping surface by default
                                            • 4 flutes with corner radius, Steel | Cast iron

                                            • 4 flutes, plain shank, 50° right hand helix angle, Steel | Cast iron
                                              • center cutting
                                              • straight face
                                              • short I long version
                                              • without clearance between shank and flute
                                              • < Ø 12 mm clamping surface is available on demand, ≥ Ø 12 mm with clamping surface by default
                                            • 4 flutes with corner radius, RSH | Non ferrous materials

                                            • 4 flutes, plain shank, 50° right hand helix angle, RSH | Non ferrous materials
                                              • center cutting
                                              • straight face
                                              • short I long version
                                              • with clearance between shank and flute
                                              • < Ø 12 mm clamping surface is available on demand, ≥ Ø 12 mm with clamping surface by default
                                            • 4 flutes for HPC machining

                                            • 4 flutes, plain shank, 50° right hand helix angle
                                              • center cutting end mill
                                              • straight face
                                              • short version
                                              • with corner radius
                                              • unequal division
                                              • < Ø 12 mm clamping surface is available on demand, ≥ Ø 12 mm with clamping surface by default
                                              • with clearance between shank and flute on demand
                                            • 4 flutes | with working depth

                                            • 4 flutes, plain shank, 50° right hand helix angle
                                              • center cutting end mill
                                              • straight face
                                              • short version
                                              • 1 x d cuttingedge length
                                              • with corner radius or chamfer
                                              • unequal division
                                              • < Ø 12 mm clamping surface is available on demand, ≥ Ø 12 mm with clamping surface by default
                                          • High feed machining | Trigaworx® | HSC

                                              • 3 flutes

                                              • 3 flutes, plain shank, special style of face teeth
                                                • short version
                                                • roughing at great depths possible, extremely smooth operation
                                                • with clearance between shank and flute
                                                • Note: r* = corner radius to be programm
                                              • 4 flutes

                                              • 4 flutes, plain shank, special style of face teeth
                                                • short version I long version
                                                • roughing at great depths possible, extremely smooth operation
                                                • with clearance between shank and flute
                                                • Note: r* = corner radius to be programm
                                              • 4 flutes | with internal coolant supply

                                              • 4 flutes, plain shank, special style of face teeth
                                                • short version I long version
                                                • roughing at great depths possible, extremely smooth operation
                                                • with clearance between shank and flute
                                                • with internal coolant supply
                                                • Note: r* = corner radius to be programm
                                            • Arbors and Adapters

                                                • Adapters, extensions, collet chucks and precision drill chucks

                                                    • Pokolm DuoPlug®

                                                    • The solid carbide adapters which are part of the POKOLM DuoPlug®-System are especially well suited for HSC and provide absolutely backlash-free fitting and extreme precision combined with the retention force required for roughing applications.
                                                    • Pokolm DuoPlug® shrinking adaptors

                                                    • DuoPlug®-shrinking adaptors are the ideal solution for economic milling or contouring with solid carbide end mills in deep slots, pockets or cavities, providing an exceptional high degree of rigidity during processing.
                                                    • Pokolm screw-on shrinking extensions

                                                    • Pokolm screw-on shrinking extensions are the perfect alternative solution for machining cavities, if the corresponding shrinking arbor is not available. Hexagonal clamping flats - also suitable for use of hexagon wrenches (ring spanners) makes spanning most flexible.

                                                      The short and slim design with internal coolant supply are other positive benefits.
                                                    • Solid carbide adapters - for screw-on end mills

                                                    • POKOLM solid carbide adapters for screw-on end mills are well suited for HSC and with extreme precision provide the retention force required for roughening applications. All adapters have an internal coolant supply as standard.
                                                    • Dense antivibration adapters -for screw-on end mills

                                                    • POKOLM solid carbide adapters for screw-on end mills are characterised by their outstanding precision. These adapters are excellent for HSC finishing processes thanks to their vibration-reducing characteristics. Adapters are also available with an internal coolant supply upon request.
                                                    • MTS adapters - for screw-on end mills

                                                    • Morse taper shank extensions for screw-on end mills. With peripheral grinded plane and fitting surfaces. For use in POKOLM morse taper shank basic arbors. Tapered shank manufactured according to DIN228A.
                                                    • Pokolm extensions - for screw-on end mills

                                                    • Cylindrical threaded extensions for reaching deep cavities rapidly and effectively. Manufactured according to the POKOLM standard with smoothed plane and mating surfaces as well as an internal coolant supply.
                                                    • Pokolm cyl. shaft - DIN 1835 A

                                                    • Threaded adapters with a cylindrical shaft according to DIN 1835A. For use in collet chuck arbors or also hydraulic expansion chucks.

                                                      Manufactured according to the POKOLM standard with smoothed plane and mating surfaces and an internal coolant supply option.
                                                    • Pokolm shell type extensions for shell type milling cutters

                                                    • Pokolm shell type extensions for shell type milling cutter bodies are the most effective solution if the reach of available standard

                                                      shell-type arbor is not long enough. Manufactured according to the POKOLM standard with smoothed plane and mating surfaces as well as an internal coolant supply.
                                                    • Precision collet chucks

                                                    • Precision collet chucks according to DIN 6499-B
                                                      • Bi-conical - collet chucks
                                                      • slotted on both ends
                                                      • Concentricity 6 µm
                                                      • Repeat accuracy 6 µm
                                                      Collet chucks in other sizes and designs upon request.
                                                    • Screw on type CNC precision drill chucks

                                                    • Screw on type CNC precision drill chucks with M16 thread connection open up more possibilities you have ever thought before. Useable in every screw on arbor, adaptor or extension allows a maximum of flexibility.
                                                      • can be used for up to max. 7,000 rpm
                                                      • with internal coolant supply
                                                      • independent of rotating direction
                                                      • extremely short and slim design
                                                      Scope of delivery includes small and large seal ring
                                                  • Hollow taper shanks HSK

                                                      • HSK 25 form E

                                                        • Hollow taper shank arbors according to DIN69893 form E, maximum precision
                                                        • fine balanced to G 2.5 gmm at 40,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 32 form E

                                                        • Hollow taper shank arbors according to DIN69893 form E, maximum precision
                                                        • fine balanced to G 2.5 gmm at 30,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 40 form E

                                                        • Hollow taper shank arbors according to DIN69893 form E, maximum precision
                                                        • fine balanced to G 2.5 gmm at 30,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 40 form EC

                                                        • Hollow taper shank arbors according to DIN69893 form E with extra drill hole in the tappet according to form C, maximum precision
                                                        • fine balanced to G 2.5 gmm at 30,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 50 form E

                                                        • Hollow taper shank arbors according to DIN69893 form E, maximum precision
                                                        • fine balanced to G 2.5 gmm at 30,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 63 form A

                                                        • Hollow taper shank arbors according to DIN69893 form A, maximum precision
                                                        • fine balanced to G 2.5 gmm at 25,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                      • HSK 100 form A

                                                        • Hollow taper shank arbors according to DIN69893 form A, maximum precision
                                                        • fine balanced to G 6.3 gmm at 12,000 rpm
                                                        • with internal coolant supply and bore hole for the coolant supply tube
                                                    • Steep taper shanks SK / BT

                                                        • SK 30 DIN 69871 AD

                                                          • Steep taper shanks DIN 69871 AD, maximum precision
                                                          • balanced to G 2.5 gmm at 30,000 rpm
                                                        • BT 30 JIS B 6339 AD

                                                          • Steep taper shanks form BT / JIS B 6339 AD, maximum precision
                                                          • balanced to G 2.5 gmm at 30,000 rpm
                                                        • SK 40 DIN 69 871 AD

                                                          • Steep taper shanks DIN 69871 AD, maximum precision
                                                          • balanced to G 6.3 gmm at 18,000 rpm
                                                        • BT 40 JIS B 6339 AD

                                                          • Steep taper shanks form BT / JIS B 6339 AD, maximum precision
                                                          • balanced to G 6.3 gmm at 18,000 rpm
                                                        • SK 50 DIN 69 871 AD

                                                          • Steep taper shanks DIN 69871 AD, maximum precision
                                                          • balanced to G 16 gmm at 8,000 rpm
                                                        • BT 50 JIS B 6339 AD

                                                          • Steep taper shanks form BT / JIS B 6339 AD, maximum precision
                                                          • balanced to G 16 gmm at 8,000 rpm
                                                      • Direct spindle mounting

                                                            • SK 50

                                                              • flange contact surfaces for direct mounting on the machine spindle
                                                              • anchor points made according to DIN 1830 for attaching to milling spindle heads according to DIN 2079
                                                              • highest degree of stability and rigidity with long projections or difficult machining tasks
                                                              • centering arbors / adapter on the following pages