Navigation : EXPO21XX > PROCESS INDUSTRY 21XX > H45: Energy > RENNER
  • Offer Profile
  • Without innovative pump and filter technology the exacting demands of the modern mechanical and systems engineering cannot be realized any longer.
    We make processes involving liquid media both more reliable and economical.
Product Portfolio
  • MAGNETIC CENTRIFUGAL PUMPS

  • Our magnetically coupled centrifugal pumps are hermetically sealed and absolutely leak-free due to their non-contact torque transmission. Pumps made of plastic or stainless steel are placed outside of the medium or container and integrated into the plant’s piping system.
      • SERIES RM 1

      • Head:
        • Hmax = 7 mWS

        Flow rate:
        • Qmax = 35 l/min

        Motor output:
        • 60 W – 90 W

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM 1.5

      • Head:
        • Hmax = 10 mWS

        Flow rate:
        • Qmax = 80 l/min

        Motor output:
        • 120 W – 180 W

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM 2

      • Head:
        • Hmax = 12 mWS

        Flow rate:

        • Qmax = 130 l/min

        Motor output:
        • 125 W – 370 W

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM-TS 2

      • Head:
        • Hmax = 8.5 mWS

        Flow rate:
        • Qmax = 120 l/min

        Motor output:
        • 125 W – 370 W

        Materials:
        • PP black (PPS®, PEEK, SIC, PTFE)
        • PVDF natural (PPS®, PEEK, SIC, PTFE)
      • SERIES RM 2U

      • Head:
        • Hmax = 9 mWS

        Flow rate:
        • Qmax = 120 l/min

        Motor output:
        • 90 W – 370 W

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
      • SERIES RM 2D

      • Head:
        • Hmax = 16 mWS

        Flow rate:
        • Qmax = 60 l/min

        Motor output:
        • 250 W

        Materials:
        • PP gray
        • PVDF natural
      • SERIES RMS 2.1

      • Head:
        • Hmax = 55 mWS

        Flow rate:
        • Qmax = 22 l/min

        Motor output:
        • 370 W - 750 W

        Materials:
        • PPS (Ryton®)
        • PVDF (without additional fillers)
      • SERIES RM 3

      • Head:
        • Hmax = 28 mWS

        Flow rate:
        • Qmax = 300 l/min

        Motor output:

        • 0.25 W - 1.5 W


        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM-TS 3

      • Head:
        • Hmax = 19 mWS

        Flow rate:
        • Qmax = 230 l/min

        Motor output:
        • 0.25 W - 1.5 W

        Materials:
        • PP black (PPS®, PEEK, SIC, PTFE)
        • PVDF natural (PPS®, PEEK, SIC, PTFE)
      • SERIES RMB 3.1

      • Head:
        • Hmax = 17 mWS

        Flow rate:
        • Qmax = 250 l/min

        Motor output:
        • 0.55 W - 0.75 W

        Materials:
        • PP gray
        • PVDF natural
      • SERIES RM 4

      • Head:
        • Hmax = 37 mWS

        Flow rate:
        • Qmax = 400 l/min

        Motor output:
        • 0.55 W - 5.5 W

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM-TS 4

      • Head:
        • Hmax = 28 mWS

        Flow rate:
        • Qmax = 400 l/min

        Motor output:
        • 1.1 W - 4.0 W

        Materials:
        • PP black (PPS Ryton®, PEEK, SIC, PTFE)
        • PVDF (PPS Ryton®, PEEK, SIC, PTFE)
      • SERIES RM 4.5

      • Head:
        • Hmax = 40 mWS

        Flow rate:
        • Qmax = 900 l/min

        Motor output:
        • 2.2 W - 15.0 W

        Materials:
        • PP gray, black or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM 5

      • Head:
        • Hmax = 47 mWS

        Flow rate:
        • Qmax = 1,700 l/min [102 m³/h]

        Motor output:
        • 2.2 W - 22.0 W

        Materials:
        • PP gray, black or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
      • SERIES RM-KM

      • Head:
        • Hmax = 24 mWS

        Flow rate:
        • Qmax = 350 l/min

        Motor output:
        • 1.5 W

        Materials:
        • PP gray
        • PVDF natural
      • SERIES RM-MS

      • Head:
        • Hmax = 67 mWS

        Flow rate:
        • Qmax = 350 l/min

        Motor output:
        • 1.5 kW – 4.0 kW

        Materials:
        • PP gray or natural
        • PVDF natural
      • SERIES RM-MF 3

      • Head:
        • Hmax = 27 mWS

        Flow rate:
        • Qmax = 250 l/min

        Motor output:
        • 0.55 kW – 1.5 kW

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM-MF 4

      • Head:
        • Hmax = 45 mWS

        Flow rate:
        • Qmax = 420 l/min

        Motor output:
        • 1.5 kW – 5.5 kW

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RM-MF 4.5

      • Head:
        • Hmax = 42 mWS

        Flow rate:
        • Qmax = 900 l/min

        Motor output:
        • 3.0 kW – 7.5 kW

        Materials:
        • PP gray, black or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
        • Stainless steel
      • SERIES RSPM 1.5

      • Head:
        • Hmax = 15 mWS

        Flow rate:
        • Qmax = 80 l/min

        Motor output:

        • 120 kW

        Materials:
        • PVDF (without additional fillers)
      • SERIES RSPM 40

      • Head:
        • Hmax = 50 mWS

        Flow rate:
        • Qmax = 500 l/min

        Motor output:
        • 3.0 kW – 4.0 kW

        Materials:
        • PP black, gray or natural (available with and without additional fillers)
        • PVDF (without additional fillers)
    • VERTICAL CENTRIFUGAL PUMPS

    • RENNER vertical centrifugal immersion pumps are designed for vertical deployment in non-pressurized tanks, open basins or pits. They offer the same range of services as magnetic drive centrifugal pumps, and enable additional possibilities due to the vertically submerged installation in the container or tank.
        • SERIES RT-VC 100

        • Advantages:
          • Compact shelving
          • Efficient
          • High-performance
          • Extremely quiet
          • Low vibration
          • Save-to-run-dry
          • Environmentally friendly installation in the tank
          • Corrosion protected thanks to double sealing

          Head:
          • Hmax = 8 mWS
            f = 50 Hz
          • Hmax = 12 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 80 l/min
            f = 50 Hz
          • Qmax = 95 l/min
            f = 60 Hz

          Motor output:

          • 60 W bis 370 W


          Materials:
          • PP grey
          • PVDF natural
        • SERIES RT 1

        • Head:
          • Hmax = 5 mWS
            f = 50 Hz
          • Hmax = 7 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 30 l/min
            f = 50 Hz
          • Qmax = 32 l/min
            f = 60 Hz

          Motor output:
          • 60 W bis 90 W

          Materials:
          • PP grey
          • PVDF natural
        • SERIES RT 1.5

        • Head:
          • Hmax = 7.5 mWS
            f = 50 Hz
          • Hmax = 10 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 70 l/min
            f = 50 Hz
          • Qmax = 85 l/min
            f = 60 Hz

          Motor output:
          • 120 W bis 180 W

          Materials:
          • PP grey
          • PVDF natural
        • SERIES RT 2

        • Head:
          • Hmax = 10 mWS
            f = 50 Hz
          • Hmax = 12 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 100 l/min
            f = 50 Hz
          • Qmax = 135 l/min
            f = 60 Hz

          Motor output:
          • 120 W bis 440 W

          Materials:
          • PP gray
          • PVDF natural
          • Stainless steel
        • SERIES RT 3

        • Head:
          • Hmax = 28 mWS
            f = 50 Hz
          • Hmax = 28 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 250 l/min
            f = 50 Hz
          • Qmax = 300 l/min
            f = 60 Hz

          Motor output:
          • 0.25 W bis 1.5 W

          Materials:
          • PP gray
          • PVDF natural
          • Stainless steel
        • SERIES RTM 3

        • Head:
          • Hmax = 18 mWS

          Flow rate:
          • Qmax = 200 l/min

          Motor output:
          • 0.37 W bis 0.75 W

          Materials:
          • PP gray
          • PVDF natural
        • SERIES RTZ 3

        • Head:
          • Hmax = 20 mWS

          Flow rate:
          • Qmax = 250 l/min

          Motor output:
          • 0.75 W bis 1.5 W

          Materials:
          • PP gray
          • PVDF natural
        • SERIES RT 4

        • Head:
          • Hmax = 32 mWS

          Flow rate:
          • Qmax = 520 l/min

          Motor output:
          • 1.1 W bis 4.0 W

          Materials:
          • PP gray
          • PVDF natural
          • Stainless steel
        • SERIES RTM 4

        • Head:
          • Hmax = 34 mWS

          Flow rate:
          • Qmax = 500 l/min

          Motor output:
          • 1.5 W bis 4.0 W

          Materials:
          • PP gray
          • PVDF natural
        • SERIES RTZ 4

        • Head:
          • Hmax = 27 mWS

          Flow rate:
          • Qmax = 400 l/min

          Motor output:
          • 1.5 W bis 4.0 W

          Materials:
          • PP gray
          • PVDF natural
        • SERIES RT 5

        • Head:
          • Hmax = 34 mWS
            f = 50 Hz
          • Hmax = 42 mWS
            f = 60 Hz

          Flow rate:
          • Qmax = 1,000 l/min
            f= 50 Hz
          • Qmax = 1,000 l/min
            f= 60 Hz

          Motor output:
          • 1.5 W bis 7.5 W

          Materials:
          • PP gray
          • PVDF natural
          • Stainless steel
        • SERIES RT 6

        • Head:
          • Hmax = 43 mWS

          Flow rate:
          • Qmax = 3,000 l/min

          Motor output:
          • 2.2 kW – 22.0 kW

          Materials:
          • PP gray
          • PVDF natural
      • FILTER UNITS AND EQUIPMENT

      • RENNER filter units are designed and constructed for deployment in chemical baths and processes. They have proven to be ideal in the circulation and cleansing of clean, slightly dirty or abrasive media, aqueous solutions, suspensions or liquid mixtures.
          • UNIVERSAL FILTER HOUSINGS

          • The RENNER universal filter housings are used to remove organic and inorganic impurities through deep and surface filtration of aggressive and neutral liquids and gases.

            All universal filter housings are engineered to also accomodate wound cartridges, activated carbon, filter bags and filter plates.
                • Series FI 1

                • Materials:
                  • PP gray or natural (available with or without fiber glass)
                  • PVDF natural (no fiber glass)
                  • Plexiglas®
                  • Jenaer Glas®
                  • Stainless steel (1.4305, 1.4571)
                  • Titanium

                  Seals:
                  • EPDM
                  • FKM
                  • NBR
                  • FEP-encased

                  Filter efficiency:
                  • Qmax = 4,000 l/h

                  Lenghts:
                  • 4 “
                  • 10 “
                  • 20 “
                  • 30 “

                  Filter elements:
                  • Wound cartridges
                  • Filter plate
                  • Filter bag
                  • Activated carbon
            • QUICK CHANGE FILTER HOUSINGS

                  • QUICK CHANGE FILTER HOUSINGS

                  • The line of products SF has proofed to be extremely reliable for use in chemical plants. These filters are characterised by compact design as well as easy and quick handling thanks to the quick fastenings, which notably reduce time for maintenance. All quick change filters are supplied with two safety switches, which prevent the filters from working without or with an open cover.

                    Advantages:
                    • Solid plastic version
                    • Easy operating thanks to the quick fastening
                    • Reduced time for maintenance

                    Application:
                    • Electroplating
                    • Caustic and purifying plants
                    • Waste and fresh water treatment
                    • Foodstuff processing
                    • Photographic industries
                    • Textile and foodstuff industries
                    • etc.

                    Materials:
                    • PP gray or natural (available with or without fiber glass)
                    • PVDF natural (no fiber glass)

                    Seals:
                    • EPDM
                    • FKM
                    • FFKM

                    Filter efficiency:
                    • Qmax = 24,000 l/h

                    Filter surface.
                    • 0.05 m2 – 0.2 m2

                    Volume:
                    • 2.0 dm3 – 13.5 dm3

                    Lenghts:
                    • 10 “
                    • 20 “

                    Filter elements:
                    • Wound cartridges
                    • Filter bags
                    • Filter sieve
                    • Activated carbon (granular)
                    • Activated carbon (filter cartridge)

                    Activated carbon:

                    Applications:

                    • Cleaning of electrolytic baths by means of activated carbon
                    • Removal of external metal from electrolytic baths
                    • Recycling of precious metals from flush water
              • FILTER SYSTEMS

              • In close collaboration with our customers during planning – for example of an electroplating plant – RENNER defines the interfaces and the functional design, considering all special wishes.
                  • Universal filtering devices

                  • In close collaboration with our customers during planning – for example of an electroplating plant – RENNER defines the interfaces and the functional design, considering all special wishes.

                    Every customer receives his individual functional module, ready to be installed.

                    Advantages:
                    • Vast range of products
                    • Solid plastic version
                    • Custom-made solutions
                    • Various filter elements
                    • Broad range of services

                    Application:
                    • Electroplating
                    • Caustic and purifying plants
                    • Waste and fresh water treatment
                    • Photographic industries
                    • Textile and foodstuff industries
                    • etc.

                    Materials:
                    • PP gray or natural (available with or without fiber glass)
                    • PVDF natural (no fiber glass)
                    • ECTFE
                    • Plexiglas®
                    • Jenaer Glas®
                    • Stainless steel (1.4305, 1.4571)
                    • Titanium

                    Seals:
                    • EPDM
                    • FKM
                    • NBR
                    • FEP-encased

                    Filter efficiency:
                    • Qmax = 70,000 l/h

                    Lenghts:
                    • 4 “
                    • 10 “
                    • 20 “
                    • 30 “
                    • 40 “

                    Volume:
                    • 1 dm3 – 185 dm3

                    Filter elements:
                    • Wound cartridges
                    • Cloth cartridges
                    • Membrane cartridges
                    • Paper discs
                    • Filter bag
                    • Filter sieve
                    • Activated carbon (granular)
                    • Activated carbon (filter cartridge)

                    Activated carbon:
                    Applications:

                    • Cleaning of electrolytic baths by means of activated carbon
                    • Removal of external metal from electrolytic baths
                    • Recycling of precious metals from flush water
                  • Filtering device + activated carbon unit

                  • Filtering installations with parallel activated carbon filter chamber are especially used with electroplating baths.

                    Activated carbon is pure and higly porous carbon with a large surface area (of up to 300 m2 per gram). It is typically used as an adsorbent.

                    Advantages:
                    • The canister element allows easy and clean use of activated carbon
                    • Low flow rates inside the canister result in long contact times that further increase the effectiveness of the filter
                    • A filter cartridge used as retention element prevents the activated carbon from being flushed out
                    • Custom-made solutions
                    • Broad range of services
                    • Solid plastic version

                    Application:
                    • Purification of drinking water (usually to adsorb odorous and flavouring substances)
                    • Adsorption of organic substances such as oil, for example
                    • Removal of foreign metals from electroplating baths
                    • Recovery of precious metals from flushing water

                    Materials:
                    • PP gray or natural (available with or without fiber glass)
                    • PVDF natural (no fiber glass)
                    • ECTFE
                    • Plexiglas®
                    • Jenaer Glas®
                    • Stainless steel (1.4305, 1.4571)
                    • Titanium

                    Seals:
                    • EPDM
                    • FKM
                    • NBR
                    • FEP-encased

                    Filter efficiency:
                    • Qmax = 70,000 l/h

                    Lenghts:
                    • 4 “
                    • 10 “
                    • 20 “
                    • 30 “
                    • 40 “

                    Volume:
                    • 1 dm3 – 86 dm3

                    Filter elements:
                    • Wound cartridges
                    • Cloth cartridges
                    • Membrane cartridges
                    • Paper discs
                    • Filter bag
                    • Filter sieve
                    • Activated carbon (granular)
                    • Activated carbon (filter cartridge)

                    Activated carbon:
                    Applications:
                    • Cleaning of electrolytic baths by means of activated carbon
                    • Removal of external metal from electrolytic baths
                    • Recycling of precious metals from flush water
                  • Band filtering device

                  • Our filtering device with a diagonal plastic band for critical media completes the variety of the RENNER filtering devices.

                    Components:
                    • Container for collection of filtered medium (with emergency overflow)
                    • Band guiding box with integrated paper reel chute and diagonal support
                    • Infeed chute
                    • Frequency inverter for the adjustment of the band speed
                    • Vertical centrifugal immersion pump for the recovery of filtered medium
                    • Control cabinet
                    • Paper control switch
                    • Level transmitter of the Centrifugal immersion pump
                    • Level transmitter of the band
                    • Magnetic and manual valve for the adjustment of the inlet

                    Accessories:

                    • In order to make the removal of used paper screens easier, the filter may be mounted on a base made of stainless steel, under which a waste trolley can be positioned.
                • HORIZONTAL FILTER PUMPS

                      • HORIZONTAL FILTER PUMPS

                      • RENNER filtering devices are composed of different parts: magnetically coupled centrifugal pumps RM and filter housings FI.

                        The subassemblies are tailor-made according to your application and will be supplied already mounted.

                        Advantages:
                        • Vast range of products
                        • Solid plastic version
                        • Tailor-made solutions
                        • Different filtering elements
                        • Broad range of services

                        Application:
                        • Electroplating
                        • Caustic and purifying plants
                        • Waste and fresh water treatment
                        • Photographic industries
                        • Textile and foodstuff industries
                        • etc.

                        Materials:
                        • PP gray or natural (available with or without fiber glass)
                        • PVDF natural (no fiber glass)
                        • ECTFE
                        • Plexiglas®
                        • Jenaer Glas®
                        • Stainless steel (1.4305, 1.4571)
                        • Titanium

                        Seals:

                        • EPDM
                        • FKM
                        • NBR
                        • FEP-encased

                        Filter efficiency:

                        • Qmax = 70,000 l/h

                        Lenghts:
                        • 4 “
                        • 10 “
                        • 20 “
                        • 30 “
                        • 40 “

                        Volume:
                        • 2.37 m3 – 13.5 m3

                        Filter elements:
                        • Wound cartridges
                        • Cloth cartridges
                        • Membrane cartridges
                        • Paper discs
                        • Filter bag
                        • Filter sieve
                        • Activated carbon (granular)
                        • Activated carbon (filter cartridge)

                        Conveying media:
                        • Density:
                          up to max. 2.0 kg/dm3
                           
                        • Viscosity:
                          up to max. approx. 160 mPas (cP)

                        • Acid and alkaline solutions, mixtures
                        • Solvents
                        • Alkaline degreasing baths
                        • Electrolytic baths
                        • Photo chemicals
                        • Radioactive, sterile and precious liquids
                        • Foodstuff
                        • Other liquid media
                  • VERTICAL FILTER PUMPS

                        • VERTICAL FILTER PUMPS

                        • RENNER filtering devices are composed of different parts: vertical centrifugal immersion pumps RT and filter housings FI.

                          The subassemblies are tailor-made according to your application and will be supplied already mounted.

                          Advantages:
                          • Vast range of products
                          • Solid plastic version
                          • Tailor-made solutions
                          • Different filtering elements
                          • Broad range of services

                          Application:
                          • Electroplating
                          • Caustic and purifying plants
                          • Waste and fresh water treatment
                          • Photographic industries
                          • Textile and foodstuff industries
                          • etc
                          .
                          Materials:
                          • PP gray or natural (available with or without fiber glass)
                          • PVDF natural (no fiber glass)
                          • ECTFE
                          • Plexiglas®
                          • Jenaer Glas®
                          • Stainless steel (1.4305, 1.4571)
                          • Titanium

                          Seals:
                          • EPDM
                          • FKM
                          • NBR
                          • FEP-encased

                          Filter efficiency:
                          • Qmax = 70,000 l/h

                          Lenghts:
                          • 4 “
                          • 10 “
                          • 20 “
                          • 30 “
                          • 40 “

                          Volume:
                          • 2.37 m3 – 13.5 m3

                          Filter elements:
                          • Wound cartridges
                          • Cloth cartridges
                          • Membrane cartridges
                          • Paper discs
                          • Filter bag
                          • Filter sieve
                          • Activated carbon (granular)
                          • Activated carbon (filter cartridge)

                          Conveying media:
                          • Density:
                            up to max. 2.0 kg/dm3

                          • Viscosity:
                            up to max. approx. 160 mPas (cP)

                          • Acid and alkaline solutions, mixtures
                          • Solvents
                          • Alkaline degreasing baths
                          • Electrolytic baths
                          • Photo chemicals
                          • Radioactive, sterile and precious liquids
                          • Foodstuff
                          • Other liquid media
                    • FILTER ELEMENTS

                    • For industrial solid-liquid separation processes, RENNER offers a wide range of filters. Here the focus is on filter cartridges, bags and paper and adsorption media such as “Spaghetti” filters, “angel hair” or activated carbon.

                      RENNER supplies the necessary consumables for all filter housings.
                        • FILTER CARTRIDGES

                        • RENNER offers a wide variety of different filter cartridges for almost any application.

                          Advantages:
                          • Long service life and top security
                          • Precise micron ratings
                          • No contamination of the filtrate

                          Application:

                          • Plating solutions
                          • Beverage and food industry
                          • Chemical industry
                          • Cooling water
                            • Wound cartridges

                            • The microscopic structure of the filter medium is one of the decisive factors for the degree of separation and the filter life of wound cartridges.

                              Lenghts:
                              • 4“
                              • 10“
                              • 20“
                              • 30“
                              • 40“ (standard)

                              Filter micron rating:
                              • 1 µm – 600 µm (standard)

                              Diameter:
                              • Inner diameter:
                                ca. 27.2 mm
                              • Outer diameter:
                                64 mm

                              Materials:
                              • Yarns:
                                Washed polypropylene, high-pressure washed polypropylene, cotton / viscose, fiber glass, polyester, Nylon®

                              • Cores:
                                Polypropylene or stainless steel

                              • Applications:
                              • Galvanic baths
                              • Beverage and food industry
                              • Cooling water
                              • Chemistry
                            • Depth filter cartridge type R-HP

                            • This depth filter cartridges are known for their particularly long service life. Due to their thermally bonded microfibers the depth filter cartridge is known to be a unique quality product, which cannot release any fibers into the filtrate and also has extremely long service life.

                              Lenghts:
                              • 9 ¾“
                              • 10“
                              • 19,5“
                              • 20“
                              • 29 ¼“
                              • 30“
                              • 39“
                              • 40“ (standard)

                              Filter micron rating:
                              • 1 µm – 75 µm (standard)

                              Diameter:
                              • Inner diameter:
                                ca. 28.5 mm
                              • Outer diameter:
                                63 mm

                              Material:
                              • Polypropylene

                              Temperature limits:

                              • up to 70 °C
                              • in water under static conditions

                              Applications:
                              • Beverage and food industry
                              • Electroplating
                              • Water
                            • Depth filter cartridge type R-CX (absolute filtration)

                            • The depth filter cartridge of the type R-CX is the premium product among the “melt-blown filter cartridges”. Only precisely defined microfibers from a special formulation of bi-components are used in the melt-blown process for producing these 3D absolute filters.

                              Lenghts:
                              • 250 mm
                              • 500 mm
                              • 750 mm
                              • 1,000 mm
                              • (standard)

                              Filter micron rating:
                              • 0.5 µm – 100 µm (Standard)

                              Diameter:
                              • Inner diameter:
                                ca. 30 mm
                              • Outer diameter:
                                66 mm

                              Material:
                              • Bi-components made of polypropylene and polyethylene

                              Temperature limits:
                              • up to 80 °C
                              • in water under static conditions

                              Applications:
                              • Beverage and food industry
                              • PCB Manufacturers
                              • Manufacturers of paints and coatings
                            • Pleated depth filter cartridges

                            • The microfibers used in the pleated depth filter cartridges are particularly uniform and are thermally joined to form a homogeneous filter layer. The resulting micro-polypropylene filter matrix is regarded as the most effective depth cartridge filter and has the highest efficiency for fine particles extremely difficult to filter.

                              Lenghts:
                              • 9 ¾“
                              • 10“
                              • 20“
                              • 30“
                              • 40“ (standard)


                              Filter micron rating:
                              • 0.2 µm – 75 µm (Standard)

                              Diameter:
                              • Inner diameter:
                                ca. 28 mm
                              • Outer diameter:
                                69 – 71 mm

                              Material:
                              • Polypropylene

                              Temperature limits:
                              • up to 82 °C
                              • in water under static conditions in long-term operation

                              Applications:
                              • Ultrapure water
                              • Beverage industry
                              • Fine chemicals
                              • Semiconductor industry
                              • Cosmetics
                              • Pure chemicals
                            • Membrane filter cartridges

                            • Membrane filter cartridges use a polyethersulfone membrane and can thus filter fine particles as well as bacteria.

                              They possess special adsorption properties and are manufactured under strictly controlled manufacturing conditions in the clean room.

                              Lenghts:
                              • 9 ¾“
                              • 10“
                              • 20“
                              • 30“
                              • 40“ (standard)

                              Filter micron rating:
                              • 0.2 µm – 0.45 µm (Standard)

                              Diameter:
                              • Inner diameter:
                                ca. 28 mm
                              • Outer diameter:
                                69 – 71 mm

                              Materials:
                              • Membrane:
                                Polyethersulfone
                              • Support cores and drainage:
                                Polypropylene

                              Applications:
                              • Ultrapure water
                              • Sterile filtration
                              • Cosmetics
                              • Microelectronics
                              • Pure chemicals
                              • Beverage industry
                              • Foodstuffs
                              • Solvents
                            • Plastic texture filter cartridges

                            • The plastic mesh filter cartridge is a versatile reusable filter element made of polypropylene tissue.

                              It is easy to clean and can be retrofitted quickly applying the building block principle with few components and little effort for other lengths and / or finenesses.

                              Lenghts:
                              • 10“
                              • 20“
                              • and desired length on request

                              Filter micron rating:
                              • 15 µm – 300 µm (Standard)

                              Material:
                              • Tissue, support core and end caps:
                              • Polypropylenes

                              Seals:
                              • FKM
                              • EPDM

                              Applications:
                              • PCB manufacturing
                            • Metallic tissue filter cartridges

                            • Metal mesh filter candles are special cartridge filters made of stainless steel. They are used when filter candles made of plastic are unsuitable, such as at high operating temperatures or in combination with certain chemicals and in processes that are carried out at high pressures. They are also referred to as surface filters.

                              Lenghts:
                              • 120 mm
                              • 248 mm
                              • 496 mm
                              • 744 mm
                              • 992 mm
                              • 1,016 mm
                                (standard)

                              Filter micron rating:
                              • 1 µm – 1,000 µm (standard)

                              Diameter:
                              • Inner diameter:
                                ca. 27 mm
                              • Outer diameter:
                                64 mm

                              Tissue surface:
                              • Metal mesh

                              • Standard:
                                about 500 cm2
                              • Pleated:
                                about 1,500 cm2

                              Material:
                              • Tissue, supporting core, end caps:
                              • Stainless steel 1.4301

                              Seals:
                              • PTFE
                                (standard at DOE)

                              Temperature limits:
                              • up to 200 °C
                              • in water under static conditions (limited by sealing material)

                              Applications:
                              • Hot liquids
                              • Solvents
                              • Viscous liquids
                              • Superheated steam
                              • Oxidizing agents (e.g. potassium permanganate, hydrogen peroxide, nitric acid, etc.)
                            • Activated-carbon filter cartridges

                            • Activated carbon filter cartridges are equipped with steam-activated coal pellets and designed especially for heavily loaded liquids. Due to the discharge form no blockage of the activated carbon surface is possible by coarse dirt and the service life is extremely long.

                              Lenghts:
                              • 250 mm
                              • 500 mm
                              • 750 mm
                              • 1,000mm

                              and

                              • 9 ¾“
                              • 10“
                              • 20“
                              • 30“
                              • 40“ (standard)

                              Filter micron rating:
                              • 1 µm – 1,000 µm (standard)

                              Diameter:
                              • Inner diameter:
                                ca. 27 mm
                              • Outer diameter:
                                64.5 mm at DOE

                              Materials:
                              • Medium:
                                Cylindrical shaped hard coal (pellets)
                              • Supporting bodies / cores:
                              • Polypropylene
                              • Casing pipes:
                                Polyethylene sintered

                              Seals:
                              • EPDM
                                (gasket for DOE)

                              Applications:
                              • Water
                              • Odor and taste-neutralizing
                              • Dechlorination
                              • Galvanic baths
                              • Hot liquids
                              • Solvents
                              • Viscous liquids
                              • Superheated steam
                              • Oxidizing agents (e.g. potassium permanganate, hydrogen peroxide, nitric acid, etc.)
                          • FILTER BAGS

                                • FILTER BAGS

                                • Filter bags are a widespread alternative to filter cartridges and particularly easy to handle. Because the debris remains inside the filters and when changing the bag the dirt is also eliminated – the bag filter housing remains clean on the filtrate side. Key applications include paints and coatings, chemicals and the food processing industry.

                                  Lenghts:
                                  • 20“ (standard)

                                  Filter micron rating:
                                  • 1 µm
                                  • 5 µm
                                  • 10 µm
                                  • 25 µm
                                  • 50 µm
                                  • 100 µm
                                    (standard)

                                  Material:
                                  • Polypropylene

                                  Applications:
                                  • Water filtration
                                  • Food and beverage industry
                                  • Paints and Coatings Industry
                                  • Chemical industry
                                  • Coolants
                                  • Solvents
                                  • Pickling baths
                                  • Degreasers
                                  • Sewage
                            • FILTER PAPER

                                  • FILTER PAPER

                                  • Filter paper is a widely used filter medium especially in the electroplating industry. It is available in thin or thick as well as activated carbon versions.

                                    Our filter papers are available in all standard sizes – please indicate your desired dimensions in your inquiry.

                                    Weights:
                                    • 90 g/m2 (thin)
                                    • 390 g/m2 (thick)
                                    • 550 g/m2 (activated carbon)

                                    Sizes:
                                    • All standard sizes are available

                                    Materials:
                                    • Cellulose

                                    or

                                    • Cellulose impregnated with activated carbon

                                    Applications:
                                    • Galvanic baths
                              • ADSORPTION MEDIA

                                    • ADSORPTION MEDIA

                                    • Adsorption media are a kind of pre-filters based on polypropylene, which are integrated in the actual filtering process.
                                      RENNER differentiates “Spaghetti filters” of microfiber and “Angel hair” comprising fiber flakes.

                                      Design:
                                      • Spaghetti as microfiber strips

                                      or

                                      • Angel hair as individual microfibers in flakes

                                      Material:
                                      • Polypropylene

                                      Applications:
                                      • Degreasing and phosphating
                                      • Oil emulsion
                                      • Pickling preparation
                                      • Suspensions with Sn (+II / + IV)
                                      • Acid baths
                                • ELECTRONIC PROCESS PROTECTION

                                • The electronic process protection system safeguards pumps and equipment against overload, clogged filters, dry run and dead head conditions. In critical situations, it switches the pump off prior to damage occuring at the same time, the system verifies the target flow rate preventing lengthy and costly failures.
                                    • RPR-CONTROL 100-1

                                    • for switching cabinet installation (DIN rail mounting)
                                      without programming unit 4 freely programmable switching thresholds (using optional programming unit):

                                      Drive efficiency:
                                      • 750 W – 20 kW

                                      Mains voltage:
                                      • 100 – 250 VAC
                                      • +5 % /-10 %
                                      • 1-ph. or 3-ph.

                                      Frequency:
                                      • 47 – 63 Hz

                                      Power consumption:
                                      • 12 W to max. 15 W

                                      Temperature data:
                                      • Operating temperature:
                                        0 – 60 °C
                                      • Storage temperature:
                                        -10 – +70 °C

                                      Protection class:
                                      • IP20

                                      Assembly:
                                      • on 35 mm DIN rail 46277
                                    • RPR-CONTROL 100-2

                                    • for switching cabinet installation (DIN rail mounting)
                                      with integrated programming unit 4 freely programmable switching thresholds:

                                      Drive efficiency:
                                      • 750 W – 20 kW

                                      Mains voltage:
                                      • 100 – 250 VAC
                                      • +5 % /-10 %
                                      • 1-ph. or 3-ph.

                                      Frequency:
                                      • 47 – 63 Hz

                                      Power consumption:
                                      • 12 W to max. 15 W

                                      Temperature data:
                                      • Operating temperature:
                                        0 – 60 °C
                                      • Storage temperature:
                                        -10 – +70 °C

                                      Protection class:
                                      • IP55

                                      Assembly:
                                      • on-site in the system,
                                      • e.g. filter unit
                                    • RPR-CONTROL 100-3

                                    • field unit with power unit up to 4.0 kW (7.5 kW optional)
                                      installation in IP 65 housing directly in the system (e.g. the filter unit) complete with pilot lights and pushbuttons without programming unit 4 freely programmable switching thresholds (using optional programming unit):

                                      Drive efficiency:
                                      • 750 W – 20 kW

                                      Mains voltage:

                                      • 100 – 250 VAC
                                      • +5 % /-10 %
                                      • 1-ph. or 3-ph.

                                      Frequency:
                                      • 47 – 63 Hz

                                      Power consumption:
                                      • 12 W to max. 15 W

                                      Temperature data:
                                      • Operating temperature:
                                        0 – 60 °C
                                      • Storage temperature:
                                        -10 – +70 °C

                                      Protection class:
                                      • IP55

                                      Assembly:
                                      • on-site in the system,
                                      • e.g. filter unit
                                    • SEPARATE PROGRAMMING UNIT

                                    • as a handheld device with cable and plug
                                      for RPR-Control 100-1 and 100-3
                                      4 freely programmable switching thresholds:
                                  • ACCESSORIES

                                  • The RENNER Module System would not be the same without a wide selection of pumps and filter accessories. The whole range not only comprises special equipment made of plastic, but also many other items that might be of great use to you – obviously made of true RENNER top quality. Do not hesitate to ask advise if you are looking for parts that are not listed up here. We will be happy to help you.
                                      • Plastic coated nut

                                      • Plastic coated cap nut
                                        DIN EN 24 032

                                        Threads/SW:
                                        • M 6 / SW 14
                                        • M 8 / SW 19

                                        Materials:
                                        • PP/A4
                                        • PP/Titanium
                                        • PVDF/A4
                                        • PVDF/Titanium
                                      • Universal tightening screw with asterisk handle

                                      • Threads:
                                        • M 8
                                        • M 10

                                        Materials:
                                        • Nut:
                                          A2, A4, Titanium
                                        • Handle:
                                          PP
                                      • Plastic screw

                                      • Threads:
                                        • M 6 – M 12
                                        • length of thread
                                          on request

                                        Materials:
                                        • PP
                                        • PVDF
                                      • Plug screw

                                      • Threads/SW:
                                        • G 3/4”
                                        • SW 28

                                        Materials:
                                        • PP
                                        • PVDF
                                      • Even hose plug

                                      • Diameter:
                                        Outer diameter:

                                        • 13 mm
                                        • 18 mm
                                        • 21 mm
                                        • 26 mm
                                        • 32 mm
                                        • 40 mm
                                        • 50 mm
                                      • Angle hose plug

                                      • Diameter:
                                        Outer diameter:

                                        • 13 mm
                                        • 18 mm
                                        • 21 mm
                                        • 26 mm
                                        • 32 mm
                                        • 40 mm
                                        • 50 mm
                                      • Flanges for suction and discharge side

                                      • Connectors:

                                        Dimensions according to DIN2501 / ANSI B16.5:

                                        • DN20
                                        • DN25
                                        • DN32
                                        • DN40
                                        • DN50
                                        • DN65
                                        • DN80
                                        • DN90
                                        • DN100
                                      • Differentiate pressure switch by RENNER (hot running protection + filter control)

                                      • The equipment monitors a set point value of pressure difference between in- and output.
                                        The set point values can be adjusted within a wide range.

                                        Application:
                                        Monitoring of pressure differences in closed circuit plants. Especially indicated for the hot-running monitoring of pumps or as an indicator for clogged filters.

                                        Seals:
                                        • EPDM
                                        • FPM

                                        Material:
                                        • Polypropylene
                                        • Polyvinylidenfluoride
                                        • Ethylene-Propylene-Diene-Rubber
                                        • Viton®

                                        Temperature:
                                        • -20 up to +100 °C
                                      • Flow indicator (run-dry protection)

                                      • The equipment is made for flow monitoring within tubes and pipes in order to prevent pumps from running dry. The device is installed directly into the pipe. By means of a float, a signal will be issued as soon as the air flow is recognized inside the pipe.

                                        Application:
                                        Monitoring device for centrifugal pumps in order to prevent them from running dry.

                                        Materials:
                                        • PP
                                        • PVDF

                                        Nominal sizes:
                                        • DN25
                                        • DN32
                                        • DN40
                                      • Automatic movement device

                                      • Constant forward and backward movement of objects by means of a connecting rod. The driving movement is carried out by a motor with extra-low voltage (24 V) for protection; with infinitely variable speed regulation on request.

                                        Application:
                                        • Movement of parts in small electroplating plants

                                        Housing material:
                                        • Polypropylene
                                    • INDUSTRY SECTORS

                                    • We know your industry sector and understand your processes

                                      For wet processes, pumps play a crucial role in any system. The entire process either stands or falls with their functionality and reliability. No one knows that better than we do, because this is our domain.

                                      Pumps and filters from RENNER are a reliable partner when it comes to finding solutions for an optimized method of conveying liquids in the name category of “A”, like alkalis, to “Z”, like zinc sulphate. We support almost all processes in which liquids up to a viscosity of 160 mPas and a density up to 2.0 kg/dm³ need to be transfered, sprayed or circulated.
                                        • RENEWABLE ENERGIES

                                        • Energy storage systems are an important element in the transition to power supply of renewable energy. Our pumps play a valuable role in the production of solar cells in wet processes as well as in the circulation of electrolytes in energy storage systems.
                                        • PCB INDUSTRY

                                        • Our corrosion-resistant pumps and filters have a proven record of delivering and discharging solutions for numerous companies around the globe.

                                          Regardless of whether developing, etching, stripping or purging – RENNER pumps always ensure the necessary pressure in spray processes and sufficient volume of flow during flooding or circulating processes. Undesirable dirt particles are captured by Renner filters to protect the PCB. For filter replacement without extended interruption in production, we have developed special locking mechanisms to help significantly increase your plant‘s productivity.
                                        • ELECTROPLATING AND SURFACE FINISHING

                                        • Our pumps and filters enable processes for surface finishing. They are used in rack as well as in drum processing. Depending on purpose, they are manufactured in a variety of materials. Transfer of aggressive or toxic liquids is never a problem.
                                        • SEMI-CONDUCTOR INDUSTRY

                                        • In clean-room environments, high demands are placed on pumping systems. Hermetically sealed pumps from Renner provide the best conditions for these applications; for example, wafer manufacturing or in the treatment of silicon by means of spraying or dip etching.
                                        • WATER TREATMENT AND ENVIRONMENTAL ENGINEERING

                                        • A wide range of different filtering techniques enable the transfer of highly contaminated water polluted with suspended solids. Examples include specially designed pumps for gas and exhaust air scrubbers. Our products and solutions are used worldwide in wastewater treatment, landfill drainage, water supply and in distance heating
                                        • CHEMICAL INDUSTRY AND LAB TECHNOLOGY

                                        • Many processes require reliable transfer of aggressive media (acids, bases, solvents). Our pumps are corrosion resistant and chemical-resistant due to the use of different materials. They are therefore suitable for tanker flushes as well as for filling and supplying of chemicals from storage tanks.
                                        • AGRICULTURE

                                        • Reliable pump performance under severe operating conditions – this is what RENNER pumps are for. Our maintenance free pumps ensure a smooth transfer of pesticides and fertilizers as well as for livestock irrigation systems.
                                        • FOOD AND BEVERAGE INDUSTRY

                                        • Breweries and dairies rely on RENNER solutions for cleaning their extensive piping systems. Our pumps are serving in a host of other process applications such as in large bakeries for applying lye to pretzels.
                                        • PHARMACEUTICAL INDUSTRY

                                        • In the strictly controlled pharmaceutical industry, purity of all products must be guaranteed. Our hermetically sealed pumps do their part to ensure that there is no entry of air during transfer.
                                        • REFRIGERATION AND HEAT EXCHANGERS

                                        • Whether coolants or water with additives – our pumps are well suited for all requirements in cold and heat applications.
                                        • NUCLEAR TECHNOLOGY

                                        • Nuclear technical processes depend on 100 % safe cooling circuits. Our maintenance free pumps guarantee the required reliability in this critical area.
                                        • MOBILE APPLICATIONS

                                        • RENNER solutions for mobile applications are tried and tested every day, for example, on ships for waste water treatment or in cooling systems. In the aerospace industry we supply, among other things, accessories for engine cleaning systems.