• Offer Profile
  • Pumps and drives for the highest demands

    The Speck Group, with its headquarters in Roth in Germany, is a family-run enterprise in the mechanical engineering sector that manufactures high-quality pumps and compressors for industrial applications.

    Our specialised products are principally used in medical technology, the chemical and pharmaceutical industries, cooling and tempering appliances and in the plastics industry. Speck is very export-oriented and employs over 575 staff members worldwide.

    Products from Speck are characterised by a wide range of available variants which is specially tailored to the customer's needs. Our staff in the Technical Department are constantly working on new solutions and further developments to our existing products that help our customers move forward – day in, day out.

Product Portfolio
  • Pumps and drives for the highest demands

      • Regenerative turbine pumps

      • Ideal for high pressures and delivery pressures at a low flow rate – pulsation-free, reversible and suitable for the delivery of gas shares

        • Hmax 7 m – 115 m (50 Hz)
        • Qmax 0,5 l/min – 400 l/min (50 Hz)

        Regenerative turbine pumps (also known as peripheral pumps or turbine pumps) are hydraulic continuous-flow machines and a sub-type of centrifugal pump. They are classed as hydrodynamic pumps.

        Speck is one of the most capable and innovative providers of regenerative turbine pumps in the world, and boasts decades of experience in developing and manufacturing these pumps.

        Areas of application

        • Particularly suitable for high pressures and/or delivery pressures at relatively low flow rates
        • Suitable for clear or cloudy liquids with no abrasive contamination or solid content, and which have a kinetic viscosity of up to 100 mm²/s
        Design
        • Speck can offer you a wide spectrum of regenerative turbine pump outputs with many different constructive designs and drive types.
        • Compared to centrifugal pumps, they have considerably smaller dimensions and a simpler construction
        • Suitable for the delivery of gas shares
        • Delivering media pulsation-free
        • Reversible, i.e. it is possible to change the delivery direction (upon request)
        • Stable characteristic curves, even in varying operating states
          • Close-coupled pumps with mechanical seal

            • Close-coupled
            • up to max. 115 m
            • up to 180 l/min

            Advantages

            • Universally deployable pumps which are suitable for many industrial applications.
            • Small dimensions

            Description

            • The motor shaft is the pump shaft
            • Connection position top/top, ax/top upon request
            • Threaded connections or SAE flanges
            • Normal-priming, self-priming upon request
            • Mechanical seal made from carbon, SiC or FKM. Other material designs are available upon request depending on the respective medium
            • Designs in copper alloy, stainless steel and high-quality plastic
            • Tmax
              Water up to 140 °C
              Oil up to 180 °C
              Further media upon request
            • ATEX II 2GD IIC cb TX

            Applications

            Agriculture
            • Dispensing milk and whey in automatic feeders for calf and pig fattening

            Temperature control / Industrial cooling

            • Cooling of machines, systems and production processes
            • Cooling of industrial lasers
            • Temperature control of control cabinets
            • Cooling of welding devices (welding pistols and circuits)
            • Temperature control in laboratory applications

            Beverage industry

            • Filling of beverages by means of bottling machines

            Food industry / Pharmaceutical industry

            • Delivery of brines in brine injection machines

            Railcars

            • Delivery of drinking water and service water in train wagons
            • Cooling of transformers in railcars

            Vehicles construction / Automotive

            • Cooling of high-speed gears in utility vehicles
          • Close-coupled pumps with magnetic coupling

            • Close-coupled,
            • Water max. 160 °C
            • Oil max. 180 °C
            • up to max. 93 m
            • up to 200 l/min

            Advantages

            • High-quality, robust and reliable pumps for continuous operation
            • Leakage-free, low-maintenance and safe in operation

            Description

            • Pump shaft made from ceramic, sleeve bearings made from SiC
            • Connection position top/top, threaded and SAE flanges
            • Normal-priming
            • High-quality magnetic couplings
            • Designs in stainless steel, spheroidal graphite cast iron, copper alloy and high-quality plastic
            • Tmax
              Water up to 180 °C
              Oil up to 200 °C
              Further media upon request
            • ATEX II 2GD IIC cb TX (except for EY-MK)

            Applications

            Power engineering

            • Delivery of water-glycol-mixtures in the field of solar technology
            Temperature control / Industrial cooling
            • Cooling of machines, systems and production processes
            • Cooling in the semiconductor industry
            • Cooling of industrial lasers
            • Temperature control of control cabinets
            • Cooling of welding devices (welding pistols and circuits)
            • Temperature control in laboratory applications
            • Tempering of tool moulds
            • Railcars
            • Cooling of transformers in railcars
          • Heat transfer pumps with magnetic coupling

            • lose-coupled
            • Thermal oil max. 350 °C
            • up to max. 93 m
            • up to 200 l/min

            Advantages

            • High-quality, robust and reliable pumps for continuous operation
            • Leakage-free, low-maintenance and safe in operation
            • Hot water version "HT" designed for high system pressures
            • Thermal oil version "TOE" impervious to low-boilers in the delivery medium

            Description

            • Pump shaft made from ceramic, sleeve bearings made from SiC
            • Connection position top/top, threaded and SAE flanges
            • Normal-priming
            • High-quality magnetic couplings
            • Stainless steel and spheroidal graphite cast iron designs
            • Tmax
              Water up to 220 °C
              Oil up to 400 °C
              Further media upon request
            • ATEX II 2GD IIC cb TX

            Applications

            Temperature control / Industrial cooling

            • Tempering of tool moulds
            • Cooling of machines, systems and production processes

            Railcars

            • Cooling of transformers in railcars
          • Sealless vertical pumps

            • Vertical pumps
            • in stainless steel or non-ferrous metal
            • 50 Hz / 60 Hz:
            • up to max. 50 m
            • up to 200 l/min

            Advantages

            • Universally deployable pumps for open circuits
            • Sealless and therefore maintenance-free
            • Small dimensions

            Description

            • Vertical single-stage or multi-stage pumps
            • Horizontal, threaded pressure connection
            • Various submersion depths available
            • Robust sleeve bearings
            • Material designs:
              T-401/601 in stainless steel
              TM-201 – TM-701 in copper alloy
              T-1001 – T-2001 in copper alloy
            • Tmax
              Water up to 90 °C
              Oil up to 150 °C, up to 200 °C upon request
              Further media upon request

            Applications

            Temperature control / Industrial cooling
            • Tempering of tool moulds
            • Cooling of machines, systems and production processes
            • Cooling of industrial lasers
            • Temperature control of control cabinets

             

          • Close-coupled pumps with EC motor

            • Close-coupled,
            • canned motor or magnetic coupling
            • 24 V,
            • up to max. 45 m
            • up to 12 l/min

            Advantages

            • High-quality and reliable pumps
            • Extremely small dimensions
            • SiC sleeve bearings
            • Low-noise
            • Drive without bearing

            Description

            • Pumps with magnetic coupling (…-MK), force transmission by outer magnet
            • Pumps with canned motor (…-MM), force transmission by motor winding
            • Drives with EC motors, 24 V (other voltages upon request)
            • Designs in brass, stainless steel and high-quality plastic
            • Connection positions top/top, threaded
            • Tmax
              Water up to 95 °C
              Oil up to 90 °C
              Further media upon request

            Applications

            Medical engineering
            • Cooling of medical lasers

            Temperature control / Industrial cooling
            • Cooling of machines, systems and production processes
            • Cooling in the semiconductor industry
            • Cooling of industrial lasers
            • Temperature control of control cabinets
            • Temperature control in laboratory applications

            Railcars
            • Delivery of drinking water and service water in train wagons

             

          • Close-coupled pumps with canned motor

            • Close-coupled
            • Water max. 120 °C
            • Oil max. 120 °C
            • up to 1000 – 4000 1/min
            • up to max. 112 m
            • up to 75 l/min

            Advantages

            • High-quality and reliable pumps
            • Extremely small dimensions
            • SiC sleeve bearings
            • Low-noise

            Description

            • Force transmission by motor winding
            • Connection positions top/top, threaded

            Applications

            Temperature control / Industrial cooling

            • Cooling of machines, systems and production processes
            • Cooling in the semiconductor industry
            • Cooling of industrial lasers
            • Temperature control of control cabinets
            • Temperature control in laboratory applications

            Railcars
            • Delivery of drinking water and service water in train wagons
        • Centrifugal pumps

        • Ideal for high flow rates at lower pressures and delivery pressures – multi-stage pumps also with higher delivery pressures. Normal-priming.

          • Hmax 8 – 630 m (50 Hz)
          • Qmax 1.2 – 540 m³/h (50 Hz)

          Centrifugal pumps (also known as rotary pumps, radial pumps or radial wheel pumps) are hydraulic continuous-flow machines.

          For decades now, Speck has been developing and manufacturing application-specific centrifugal pumps and setting new standards, especially with its innovative modular heat transfer pump system.

          With a cutting-edge testing area for tests up to 750 m³/h and 400 m, Speck boasts an outstanding framework for research, development and series testing.

          Areas of application

          • Particularly well suited for high flow rates at relatively low pressures or delivery pressures
          • Suitable for clear liquids with no abrasive contamination or solid content
          • The adjustment to the operating point takes place by changing the impeller diameter; higher delivery pressures or higher pressures are achieved with multi-stage designs.
          • Normal-priming, not suitable for the delivery of gas shares

          Design

          • Centrifugal pumps have enclosed impellers with a cover plate, and both open impellers and back vanes for small pumps with an EC motor
          • Alongside single-stage pumps with a volute casing or inline casing, Speck also offers horizontal, multi-stage pumps with modular design.
            • Close-coupled pumps with mechanical seal

              • Close-coupled
              • 50 Hz / 60 Hz: max. 11 m / 11 m³/h
              • 0 Hz: max. 57 m / 16 m³/h
              • 60 Hz: max. 82 m / 16 m³/h

              Advantages

              • Universally deployable pumps which are suitable for many applications
              • Small dimensions

              Description

              • The motor shaft is the pump shaft
              • Threaded connections
              • Mechanical seal made from carbon, SiC and FKM. Other material designs are available upon request depending on the respective medium
              • Grey cast iron, spheroidal graphite cast iron or stainless steel designs
              • Tmax
                Water up to 140 °C
                Oil up to 160 °C
                Further media upon request
            • Close-coupled pumps with magnetic coupling

              • Close-coupled, with controlled PM synchronous motor
              • 1000 – 4000 1/min max. 98 m / 23 m³/h

              Advantages

              • Universally deployable pumps which are suitable for many applications
              • High-quality, robust and reliable pumps for continuous operation
              • Low-maintenance and safe in operation
              • Small dimensions
              • High motor efficiency

              Description

              • High-quality magnetic couplings
              • Threaded and SAE flanges
              • Spheroidal graphite cast iron or stainless steel designs
              • PM synchronous motor (VSD)
              • Operation with frequency converter only
              • Tmax
                Water up to 160 °C
                Oil -100 °C up to +300 °C, higher temperatures on request
            • Close-coupled pumps with EC motors

              • Close-coupled,
              • canned motor
              • 24 V, up to max. 14 m / 100 l/min
              • optional with magnetic coupling

              Advantages

              • High-quality and reliable pumps
              • Extremely small dimensions
              • SiC sleeve bearings
              • Low-noise
              • Drive without bearing

              Description

              • Pumps with magnetic coupling (…-MK), force transmission by outer magnet
              • Pumps with canned motor (…-MM), force transmission by motor winding
              • Drives with EC motor, 24 V, 12 V upon request
              • Designs made from high-quality plastic and stainless steel
              • Tmax
                Water up to 80 °C
                Oil up to 80 °C
                Further media upon request
            • Heat transfer pumps

              • Heat transfer pumps
              • with mechanical seal or with magnetic coupling
              • 50 Hz: 2900 1/min, max. 100 m / 540 m³/h
              • 60 Hz: 3500 1/min, max. 100 m / 460 m³/h

              Advantages

              • High-quality, reliable pumps for low- and high-temperature applications
              • Safe in operation, easy to service and robust

              Description

              • Modular system with 6 model series
              • Pumps with mechanical seal or magnetic coupling, with a volute casing or inline casing, with a base plate or bracket
              • PN 16, bearing brackets 360 and 470
              • Pumps with centreline mounting and/or double volutes
              • Spheroidal graphite cast iron and stainless steel designs
              • Tmax
                Hot water up to 160 °C, up to 180 °C upon request
                Heat transfer oils from -100 °C to 350 °C, up to 400 °C upon request
              • ATEX II 2GD IIC cb TX
            • Boiler feed pumps

              • Boiler feed pumps,
              • multi-stage, horizontal
              • 50 Hz: 2900 1/min, max. 630 m / 110 m³/h
              • 60 Hz: 3500 1/min, max. 400 m / 125 m³/h

              Advantages

              • Reliable and universally deployable boiler feed pumps
              • Modular system with 4 sizes

              Description

              • Horizontal pumps with modular design, with mechanical seal or stuffing box packing
              • Robust external shaft bearings
              • Hydraulically balanced impellers
              • Grey cast iron or spheroidal graphite cast iron designs
              • PN 40 and PN 63
              • Tmax
                Water up to 120 °C
                Oil up to 120 °C
                Further media upon request
          • Side channel pumps

          • Ideal for delivering, filling and draining under difficult physical conditions – self-priming and suitable for the delivery of gas shares

            • Hmax 35 – 400 m (50 Hz)
            • Qmax 2 – 35 m³/h (50 Hz)

             

                • Side channel pumps

                  • up to 3500 1/min,
                  • up to max. 235 m
                  • up to 42 l/min

                  Advantages

                  • Reliable and universally deployable pumps
                  • Developed for delivering, filling and draining under difficult physical conditions

                  Description

                  • Modular system with 6 model series
                  • Horizontal, multi-stage modular pumps with a base plate or bracket, with external roller bearings or internal sleeve bearings
                  • Single- and double-acting mechanical seals upon request, depending on the medium
                  • Wide spectrum of magnetic couplings for optimum configuration at the operating point
                  • Optional separating cans made from ceramic to avoid eddy current losses
                  • ASK/ASK-MK combi-pump with additional NPSH inducer stage (radial wheel)
                  • Bronze and spheroidal graphite cast iron designs
                  • The small side channel pump GY with mechanical seal props up the lower end of the delivery spectrum.
                  • PN 40
                  • Tmax
                    Hot water up to 180 °C
                    Heat transfer oils from -100 °C to 350 °C
                    Further media upon request
                  • ATEX II 2GD IIC cb TX
            • Displacement pumps

            • Ideal for very high pressures and delivery pressures at a low flow rate – reversible, suitable for delivery of gas shares and without return flow when stopped.

              • pmax 8 – 14 bar (50 Hz)
              • Qmax 0.6 – 16 l/min (50 Hz)

              Speck exclusively offers constant pumps, i.e. pumps with the same volume for each revolution

              • Roller vane pumps (also known as fly pumps)
              • Oscillating piston pumps (also known as vibrating diaphragm pumps)
              • Gear pumps

              Areas of application

              • Displacement pumps are (particularly) suitable for very high pressures and/or delivery pressures at very low flow rates
              • Suitable for clear or cloudy liquids with no abrasive contamination or solid content
              • Suitable for the delivery of gas shares and self-priming
              • No return flow of the medium when stopped

              Design

              • Roller vane pumps and gear pumps with close-coupled design, with magnetic coupling or with mechanical seal
              • Wide performance spectrum for roller vane pumps
              • Gear pumps with canned motor
                • Roller vane pumps

                  • Close-coupled,
                  • mechanical seal
                  • 50 Hz: max. 14 bar / 16 l/min

                  Advantages

                  • Universally deployable pumps for high-pressure applications
                  • Small dimensions

                  Description

                  • DS: Design with mechanical seals
                  • DS-MK: Design with magnetic coupling
                  • Connection position top/top, threaded
                  • Copper alloy or stainless steel designs
                  • Tmax
                    Water up to 70 °C
                    Oil up to 70 °C
                    Further media upon request
                  • ATEX II 2GD IIC cb TX
                • Gear pumps

                  • lose-coupled,
                  • magnetic coupling or canned motor
                  • up to max. 9 bar / 205 l/h

                  Advantages

                  • Reliable pumps for high-pressure applications
                  • Small dimensions

                  Description

                  • ZY-MK: Designs with magnetic couplings in stainless steel
                  • ZY-MM: Designs with canned motor in spheroidal graphite cast iron
                  • Connection position left/right, threaded
                  • Tmax
                    Oil, fuel -40 °C to 80 °C
                • Oscillating piston pumps

                  • Oscillating piston pumps
                  • 230 V, max. 14 bar / 35 l/h

                  Advantages

                  • Simple pumps for high-pressure applications and low flow rates
                  • Small dimensions

                  Description

                  • 50 Hz coil
                  • Material design in brass
                  • Tmax
                    Water up to 60 °C
              • Liquid ring vacuum pumps

              • Ideal for dry and contaminated gases, saturated vapours and condensates – oil-free delivery and suitable for delivery of water shares

                • pmin 120 – 33 mbar abs. (50 Hz)
                • Qmax 2.5 – 1600 m³/h (50 Hz)

                Liquid ring vacuum pumps are also known as water ring pumps, liquid ring pumps or liquid ring compressors.

                For decades now, Speck has been developing and manufacturing liquid ring vacuum pumps and has made a name for itself with its innovative, industry-specific advances in this field.

                Areas of application

                • They are used in many sectors in discontinuous and continuous operation in the three basic processes of extraction, leakage extraction and degasification, for example:
                  extracting dry gases, saturated gases and vapours
                  extracting contaminated gases
                  delivering liquid shares at a constant vacuum
                  delivering explosive gases, e.g. hydrogen
                • Oil-free compression, i.e. no oil in the medium nor in the exhaust air
                • Minimum suction pressures possible up to 33 mbar abs., with gas ejectors (also known simply as "ejectors") even possible up to 5 mbar abs.

                Design

                • Wide spectrum of varied single- and two-stage, close-coupled and base plate pump construction designs

                    • Liquid ring vacuum pumps

                    • up to 120 mbar abs. / 1900 m³/h

                      Advantages

                      • High-quality, reliable pumps which are suitable for many industrial applications.
                      • Great variety of graded pump sizes which span a large range of delivery volumes
                      • Broad portfolio of different designs: Robust standard designs, pumps that are free of dead space, pumps suitable for delivery of water shares, operating water-saving pumps and low-noise, two-stage pumps

                      Description

                      • Single-stage and two-stage pumps, with and without flap valves
                      • Close-coupled pumps and base plate pumps
                      • Mechanical seals, depending on the medium
                      • Usually with a single mechanical seal, but also available with a double-acting mechanical seal
                      • VZ model series also with a magnetic coupling
                      • Various material designs: Copper alloy, grey cast iron and stainless steel
                      • Base plate pumps with type examination certificate and ATEX (II 1G IIB+H2 cbk TX)
                      • Close-coupled pumps with ATEX II 2G cb TX
                • Vacuum systemss

                • Prefabricated and compact system solutions with integrated components, some with controls – simple, small and highly efficient

                  Vacuum systems (also called vacuum units, vacuum equipment and compact systems) consist of additional integrated components alongside a vacuum pump.

                  Operational safety and optimum configuration thanks to ideally coordinated system components – for your application too

                  Advantages

                  • Prefabricated system solutions offer many advantages – both for the manufacturer of the units and plant operators
                  • Just one single supplier for a system solution instead of many suppliers for various components
                  • Compact vacuum units with low space requirements/with small dimensions
                  • Reduction in assembly time for the customer thanks to plug-and-play vacuum units which are mechanically ready to connect
                  • Also the possibility of retrofitting present devices and systems, depending on the design in question
                  • Speck ensures the best possible integration of components such as separator tanks, condensers, valve technology, gas ejectors, exhaust gas condensers, sensors, frequency converters and regulation/control systems.
                  • Speck undertakes all work steps on behalf of the customer – from the development to the manufacture and the final inspection – with cutting-edge and highly advanced test rigs.

                  Design

                  • BluSystems – vacuum units for wet and dry calibration of plastic profiles
                    Huge energy savings thanks to frequency regulation and a smart system solution
                  • UniVac – plug-and-play vacuum units
                    Compact, ready to connect and easy to maintain: vacuum units with highly efficient separator tank, condenser and heat exchanger

                    • BluSystems

                      • max. -930 mbar rel.
                      • max. 145 m³/h output
                      • max. 30 m³/h water discharge

                      Advantages

                      • Ready-to-connect modular system – developed for wet and dry calibration of plastic profiles
                      • Also suitable for condensate recovery
                      • Very high energy savings thanks to demand-driven vacuum generation
                      • Decentralised vacuum units with smart regulation and simple operation
                      • Can be retrofitted – simple installation in the place of existing vacuum pumps
                      • Automatic regulation and saving of parameters enables reproducible, consistently high quality of the end products

                      Description

                      • Vacuum units comprising liquid ring vacuum pumps, motors with frequency converter, sensors and operating unit
                      • BluVacCompact also with integrated separator tank for extracting air/water mixtures
                      • BluVacD (BluVacDecentralised) for existing separator tanks/vacuum tanks in the system
                      • BluLine VB based on a side channel blower
                      • Control using standard operating panel or via PLC interface
                    • UniVac

                    • up to max. 33 bar abs. / 110 m³/h

                      Advantages

                      • Plug-and-play vacuum units which are mechanically ready to connect – developed for sterilisers
                      • Also for other applications such as degasification, drying and distilling
                      • Extremely compact, completely pre-assembled and easy to maintain
                      • Highly effective two-stage separator tank

                      Description

                      • Vacuum units comprising liquid ring vacuum pumps, separator tank, condenser and optional heat exchanger
                      • Integration of additional components such as gas ejectors, valve technology or exhaust gas condenser upon request
                      • UniVac-…-1 with robust, single-stage vacuum pumps from model series V
                      • UniVac-…-2 with quiet, two-stage vacuum pumps from model series VZ
                      • Material design in grey cast iron (UniVac-10-1 in copper alloy)
                  • Applications

                      • Temperature control

                      • Speck is a partner to market-leading manufacturers of tempering devices.

                        We support your company in precisely controlling thermal processes with the help of safe and reliable solutions.

                      • Industrial cooling

                      • Speck is a partner to market-leading manufacturers of cooling appliances, cooling systems and devices with integrated cooling.

                        We support your company in precisely controlling cooling processes with the help of reliable and economical solutions.

                      • Heating & Cooling technology

                      • Speck is a partner to market-leading manufacturers and operators of heat transfer and cooling technology.

                        In close cooperation, we support your company in safely controlling thermal processes with the help of safe, reliable and economical solutions.

                      • Medical engineering

                      • Speck supplies manufacturers around the world in the field of medical technology.

                        In close cooperation, we support your company in realising safe and reliable medical technology solutions.

                      • Plastics industry

                      • Speck supplies plastics processing companies and systems manufacturers worldwide.

                        In close cooperation, we support your company in realising solutions with high energy efficiency and reliability.

                      • Rail & Road

                      • Speck is a partner to market-leading companies in the vehicle industry.

                        In close cooperation, we support your company in realising reliable and durable solutions for difficult and changing ambient conditions.

                      • Energy technology

                      • Speck is a partner to market-leading companies in the energy industry.

                        In close cooperation, we support your company in realising economical, efficient and sustainable solutions.

                      • Chemical & Pharmaceutical industry

                      • Speck supplies systems manufacturers and operators worldwide in the chemical and pharmaceutical industry.

                        In close cooperation, we support your company in realising safe and hygienic solutions for critical processes.

                      • Your application/OEM

                      • Speck is a partner to market-leading manufacturers with demanding and pioneering applications for many different branches of industry.

                        We support your company in the development of a customer-specific solution for your application.