- Offer Profile
-
Hangcha Group was founded in 1956. 66 years later, Hangcha Group continues to manufacture reliable material handling equipment. Quality and innovation are two of the reasons that Hangcha Group is ranked 8th globally in sales of material handling equipment, distributes to over 180 different countries, and employs over 5,400 people.
Now, we can offer a complete fleet of material handling equipment, from 1-48t internal combustion counterbalance forklift, 0.6-48t electric forklift trucks, warehouse equipment, 3-6t side loader, empty container handler, reach stacker, AGV and much more. Our annual production capacity is more than 400,000 units thanks to the intelligent manufacturing factory. In 2021, more than 247 000 new Hangcha units were sold worldwideVisit us on:
LITHIUM E-TRUCKS
E-Trucks
XE Series Electric Forklift Truck With Lithium Power 1.5-3.8t
- Load Capacity: 2,000~3,800kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
Independently developed by Hangcha on the basis of decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series high voltage lithium battery forklifts are a new series of electric counterweight forklifts with a new energy vehicle voltage platform and a pioneered special structure that represents a breakthrough over the traditional design concept. Representing a redefinition of electric forklifts in terms of efficiency, power, reliability, etc., this series of electric forklift models will supersede the internal combustion forklifts.
XE Series Electric Forklift Truck With Lithium Power 4.0-5.0t
- Load Capcity: 4,000~5,000kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
XE series standard lithium battery forklifts are quality products that are developed on the basis of the advantages of the dedicated lithium battery forklift structure and the permanent magnet synchronous motor technology. Inheriting the family design of electric forklifts, some key parts can also be used for internal combustion forklifts.
XE Series Electric Forklift Truck With Lithium Power 6.0-10t
- Load Capcity: 6,000~10,000kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
While inheriting the family design of electric forklifts, some key parts are universal with internal combustion trucks. The whole truck has been optimized in terms of performance, ergonomics, reliability, maintenance, outdoor working ability, and load capacity to meet the needs of customers for internal combustion forklift usage scenarios.
XH Series High-Voltage Lithium Battery Forklift 2.0-3.8t
- 2,000~3,800kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
Independently developed by Hangcha on the basis of decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series high voltage lithium battery forklifts are a new series of electric counterweight forklifts.
Exterior
With the inherited exterior design of the dedicated XC lithium battery forklift and a smooth and sturdy profile, the whole vehicle is impact, elegant, stylish, sturdy and powerful.Advancement
oth the drive and operating systems are vehicle-grade permanent magnet synchronization systems, equipped with a high-speed ratio gearbox with a driving speed, upslope degree and acceleration performance rival that of internal combustion vehicles, and the environmental performance better than that of internal combustion vehicles.Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
XH Series High-Voltage Lithium Battery Forklift 4.0-5.0t
- 4,000~5,000kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
Independently developed by Hangcha on the basis of decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XC series heavy-duty lithium battery forklifts are a new series of electric counterweight forklifts with a new energy vehicle voltage platform and a pioneered special structure that represents a breakthrough over the traditional design concept.
Comfort
The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue.Advancement
The vehicle’s 309V high-voltage platform is equipped with a long-lasting large-capacity lithium battery, which is powerful, efficient and energy-saving, adopts a super-fast charging technology that enables a short charging time, and is compatible with the automobile charging pile to enable more convenient charging.Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.Maintainability
The water tank lid can be removed quickly and easily without a tool to enable a large operating area for cleaning and maintenance.
XH Series Heavy-Duty High-Voltage Lithium Battery Forklift 4.0-5.0t
- 4,000~5,000kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
The XH series heavy-duty high-voltage lithium battery special forklift inherits the advantages of the XH heavy-duty series and adopts the CATL standard box. This tonnage industry is the one that uses a dual-water cooling system for the motor and battery. It has super heat dissipation performance and can meet 24h non-stop operation.
Appearance
With the inherited classic exterior design of the dedicated XC lithium battery forklift and a smooth and sturdy profile, the whole vehicle is compact, elegant, stylish and sturdy.Safe and Reliable
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.Strong Adaptability
The drive axle, steering axle and tires of internal combustion forklifts can meet the demand of high-intensity operating conditions of internal combustion forklifts. It meets all-weather operating conditions and is usable under severe operating conditions such as cold storage, heavy rains and waterlogged roads.Convenient Maintenance
The vehicle with ergonomic design, a wide view and a large operating space makes it easier for drivers to operate; The multi-functional color screen instrument is designed to have graphic interfaces; three SPE speed gears are selectable to adapt to different operating conditions; interfaces can be switched between English and Chinese to meet the demands of customers at home and abroad.
XH Series High-Voltage Lithium Battery Forklift 6.0-10t
- 6,000~10,000kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
Independently developed by Hangcha on the basis of decades of deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series heavy-duty high-voltage lithium battery forklifts are a new series of products with a new energy vehicle voltage platform and a pioneered special structure that represents a breakthrough over the traditional design concept.
Ultra-long Battery Life
The vehicle uses an overall controller to control the traction motor controller assembly and the driving motor controller assembly to form a highly independent, light-weighted, efficient and intelligent drive system.Internal Combustion Condition
Both the drive and operating systems are vehicle-grade permanent magnet synchronization systems. Equipped with a high speed ratio gearbox, the driving speed, upslope degree and acceleration performance surpass that of internal combustion vehicles.Easily Maintainable
The water tank lid can be removed quickly and easily without a tool to enable a large operating area for cleaning and maintenance.Safety
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.
XH Series Heavy-Duty High-Voltage Lithium Battery Forklift 6.0-10t
- 6,000~10,000kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
Independently developed by Hangcha on the basis of decades of a deep understanding of electric forklifts and internal combustion forklifts, the dedicated XH series heavy-duty high-voltage lithium battery forklifts are a new series of products with a new energy vehicle voltage platform, a water-cooling lithium battery, as well as a pioneered special structure that represents a breakthrough over the traditional design concept.
Strong Adaptability
The drive axle, steering axle and tires of internal combustion forklifts can meet the demand of high-intensity operating conditions of internal combustion forklifts. It meets all-weather operating conditions and is usable under severe operating conditions such as cold storage, heavy rains and waterlogged roads.Ultra-long Battery Life
With a 309V high-voltage platform and vehicle-grade permanent magnet synchronization system, the vehicle boasts of a smaller current, very low heat loss and more energy-efficient; The vehicle uses an overall controller to control the traction motor controller assembly to form a highly independent, user-friendly and intelligent drive system.Safe and Reliable
The cover of the vehicle is designed to be sealed to the water resistance level of IPX4 for the body. All the motor, electronic controls and high-voltage components reach the dust and water resistance level of IP67, a high protection level adequate to withstand harsh operating environments and ensure safety and reliability.Convenient Maintenance
The vehicle with ergonomic design, a wide view and a large operating space makes it easier for drivers to operate; The multi-functional color screen instrument is designed to have graphic interfaces; three SPE speed gears are selectable to adapt to different operating conditions; interfaces can be switched between English and Chinese to meet the demands of customers at home and abroad;
XA Series 3.0-3.5t Electric Forklift Truck With Lithium Power
- Load Capcity: 3,000~3,500kg
- Lift Height: 0~5000mm
- Drive Types: Li-Ion
XA series four-point light-duty lithium battery forklift are qualityguaranteed cost-efficient new products with a redesigned internal structure, which inherit the classic exterior design of Hangcha’s A series products and are applicable to light-duty operation scenes.
XA II Series 3.0-3.8t Electric Forklift Truck With Lithium Power
- Load Capcity: 3,000~3,800kg
- Lift Height: 0~6000mm
- Drive Types: Li-Ion
XA II series 4W light-duty lithium battery forklift are quality-guaranteed cost-efficient new products with a redesigned internal structure, which inherit the classic exterior design of Hangcha’s A series products and are applicable to light-duty operation scenes.
XA III Series Electric Forklift Truck with Lithium Power
- Load Capcity: 2,000~3,800kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
XA series four-pivot lithium battery forklifts are a new generation of products developed by Hangzhou. The design concept is to inherit the appearance of "Leiting" series products while improving the performance of the products, expanding the optional battery capacity, optimizing the internal structure, and adopting a series of mature components, which can meet the requirements of more complex and high-intensity work.
XC Series Electric Forklift with Li-Ion Power 1.5~3.5t
- 1,500~3,500kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
The XC series new energy electric forklifts, covering range from 1.5t to 3.5t, is a series of products with new chassis launched by HANGCHA.
Advantages
An ultra-high power AC pump motor is used. The system has high efficiency, complete protection functions, built-in speed and temperature sensors, and greatly improved reliability and life.
Comfort
Owing to the low center of gravity and good stability, the driver feels comfortable during turning.
Safety
The optional OPS system can disable the lowering when the driver leaves the seat and enable high safety.
Maintenance
Internal Components Protected with Fully-sealed Hood, controllers, motors electrical components, etc. are sealed from dust and water.
Main Accessories
The truck has passed the CE certification.
XC Series Electric Forklift with Li-Ion Power 2.0~3.5t (Light Duty)
- 2,000~3,500kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
The XC series new energy electric forklifts, covering range from 2.0t to 3.5t, is a series of products with new chassis launched by HANGCHA.
Advantages
The ultra-high power AC traction motor has a bridge structure.
Safety
The handbrake can be optionally equipped with an alarm buzzer to prompt the driver to pull up the handbrake before leaving the truck.
Maintenance
Internal Components Protected with Fully-sealed Hood, controllers, motors electrical components, etc. are sealed from dust and water.
Main Accessories
The truck has passed the CE certification.
XC Series 4-W Electric Forklift Truck With Lithium Power 6.0
- Load Capcity: 6,000~10,000kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
XC series lithium battery forklifts 6-10t are brand new products on the basis of Hangzhou forklift's “lithium battery special structure”, and offer two platforms, the classic “AC Asynchronous” and the leading “permanent magnet synchronous”. Following the family design of electric forklifts, they are optimized mainly on the overall performance, ergonomics, reliability, maintenance, outdoor operation ability and load capacity in a bid to meet customers’ use scenarios of traditional electric forklifts.
XC series electric forklift with Li-Ion power 1.5~3.5t
- Load Capcity: 1,500~3,500kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
The XC series new energy electric forklifts, covering range from 1.5t to 3.5t, is a series of products with new chassis launched by HANGCHA.
A series Dual Drive Electric Forklift(Li-Ion)
- Load Capcity: 2,000~3,500kg
- Lift Height: 0~6500mm
- Drive Types: Li-Ion
A series 4.0-4.99t (Li-Ion)
- Load Capcity: 4,000~4,990kg
- Lift Height: 0~6000mm
- Drive Types: Li-Ion
A Series High Capacity Electric Forklift Truck
- Load Capcity: 12,000~16,000kg
- Lift Height: 0~6500mm
- Drive Types: Li-Ion
The new A series (12-16 ton) electric counterbalanced forklift continues the style of the original A series electric forklift, with the addition of lithium battery models to meet various market demands. The climbing performance and lifting speed are higher than the original A series electric forklift, and the degree of localization of key components of the whole truck is higher. By adopting domestically produced and mature components, it provides customers with a more cost-effective and diversified product.
AE series 1.5-3.5t (Li-Ion)
- Load Capcity: 1,500~3,500kg
- Lift Height: 0~7000mm
- Drive Types: Li-Ion
Independently developed by Hangcha on the basis of more than 30 years of electric forklift research and development and accumulated manufacturing technology, the AE series electric forklifts are a new series of high-efficiency and energy-saving electric counterweight forklifts with a new structure that represents a breakthrough over the traditional design concept. The research and development of control and power systems are innovated and the product exterior, ergonomics, reliability, maintenance and other aspects are optimized, so that the performance of the vehicle is greatly improved.
X series 0.6-1.0t(Li-Ion)
- Load Capcity: 600~1,000kg
- Lift Height: 0~4500mm
- Drive Types: Li-Ion
Hangcha’s X series 0.6-1.0t 3W electric forklifts are a new series of high-efficiency, energy-saving small-tonnage electric counterbalanced forklifts with a new structure that represents a breakthrough over the traditional design concept. With a compact structure, small turning radius and light weight and high maneuverability, the truck is widely used in narrow operation places, e.g., used for handling between floors, to and from elevators or in warehouses, supermarkets, workshops, etc.
X Series 1.3-1.5t
- Load Capcity: 1,300~1,500kg
- Lift Height: 0~4500mm
- Drive Types: Li-Ion
Hangcha’s X series 1.3-1.5t three-point electric forklifts are a new series of high-efficiency, energy-saving electric counterweight forklifts with a new structure that represents a breakthrough over the traditional design concept. With a compact structure, small turning radius and light weight and high maneuverability, the vehicle is widely used in narrow operation places, e.g., warehouses, supermarkets, workshops, etc.
XC Series Electric Forklift with Li-Ion Power 4.0~5.0t
- 4,000~5,000kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
XC series 4-5t new energy electric forklifts have tonnage extended on the basis of Hangcha Group's dedicated XC series 1-3.5t lithium battery vehicles. The whole series covers dedicated lithium battery models dedicatedly developed according to the characteristics of lithium batteries.
Advantages
An ultra-high power AC pump motor is used. The system has high efficiency, complete protection functions, built-in speed and temperature sensors, and greatly improved reliability and life.
Comfort
Owing to the low center of gravity and good stability, the driver feels comfortable during turning.
Safety
The optional descending lock function can disable the descending function when the driver leaves the seat and enable high safety.
Maintenance
The drive motor of a high protection level is dustproof and waterproof and highly reliable.
Main Accessories
The emergency cut-off switch equipped for the standard configuration complies with EU regulations.
X series 1.0-3.5t (Li-Ion)
- 1,000~3,500kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
The X series 1.0- to 3.5-ton forklift trucks are new-generation products by independent research and development based on former products of HANGCHA, with an overall upgrade in appearance molding, performance efficiency, comfort, safety and maintainability.
Appearance
Appearance design methods of new concepts, streamlined surface modeling, flexible and smooth lines, elegant and decent.
Comfort
Designed based on ergonomics, the longer wheelbase provides larger space for legs. The diameter of steering wheel has been decreased to 300mm. Seats can be adjusted forward and backward for operators to choose the best driving position.
Safety
LED front lights and combined lights provide better view to operators under any circumstance.
Maintainability
Brake fluid can be added when the shield cover and oiler cover are opened.
Advancement
AC controllers realize computer control in travelling, turning, lifting, inclining and other movements.
X series 4.0-5.0t (Li-Ion )
- 4,000~4,990kg Load Capacity
- 0~7000mm Lift Height
- Li-Ion Drive Types
Stability
The drive motor is arranged in parallel, the battery is placed at the bottom of the vehicle frame, the wheelbase and rear wheel pitch are increased, the swing point of the steering axle is raised, and the distance between the front of the fork and the front axle is reduced, to enable excellent stability.
Comfort
In accordance with the ergonomically design, the wheelbase is increased to enable enlarged leg space. The radius of the hand wheel is reduced to 300mm and the seat can be adjusted backwards and forwards, so that the operator can choose the best driving position.
Safety
The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Advancement
The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.
Maintainability
The fully opened hood quite facilitates the maintenance of the battery, oil pump motor and electric control assembly.
XC Series 3-Wheel Electric Forklift Truck with Lithium Power
- 1,300~2,000kg Load Capacity
- 0~6500mm Lift Height
- Li-Ion Drive Types
Covering models with a tonnage of 1.3t, 1.5t, 1.6t, 1.8t and 2.0t respectively, the new XC series three-point new energy electric forklifts are HANGCHA’s dedicated-purpose battery forklifts subsequent to the XC series four-point dedicated-purpose battery forklifts.
Excellent Ergonomic Design
The truck has a large operation space more than 50% larger than that of the traditional three-point electric truck. The enlarged brake pedal and appropriate regenerative braking function can effectively reduce the driver’s fatigue.Easy Operations and Maintenance
With the fully sealed hood and side plates, all major components including the electrically controlled components, motor, electrical components, etc. are sealed from dust and water. Vulnerable parts and key parts are arranged reasonably to facilitate maintenance and repair.Advancement
The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.Main Accessories
The main electrical components such as the motor controller, contactor, power plug, emergency cut-off switch, dashboard, accelerator, are all products of well-known foreign brands.Comfort
The intelligent sensing enables buered descending. When the fork is 100 - 60mm away from the ground, the descending will automatically slow down, so that the goods and pallet will not hit the ground.
A Series 1.3-2.0 (Li-Ion)
- 1,300~2,000kg Load Capacity
- 0~6500mm Lift Height
- Li-Ion Drive Types
Comfort
Both the steering column and seat can be adjusted easily, every operator can find the best driving position.Safety
Emergency switch is standard specification which meets the Euro safety regulation.Maintainability
Front dual separated driving motors can realize the wheels forward or backward independently, the small turning radius is suitable for narrow channel; Imported reducer, high power driving motor provides a reliable and strong performance.Maintenance
Full opened battery cover is easy for battery service and changing.
Pallet Trucks
A series Mini range pallet truck II
- Load Capcity: 1,500kg
- Lift Height: 0~120mm
- Drive Types: Lead Acid Battery
The A series pallet truck mini range Ⅱ has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, the A series pallet truck mini range Ⅱ has the strength and durability to minimise your total cost of ownership.
A series Mini range pallet truck III
- Load Capcity: 1,500kg
- Lift Height: 0~120mm
- Drive Types: Lead Acid Battery
The A series pallet truck mini range III has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, the A series pallet truck mini range III has the strength and durability to minimise your total cost of ownership.
A Series Mini Pallet Truck
- Load Capcity: 2,000kg
- Lift Height: 0~120mm
- Drive Types: Lead Acid Battery
The A Series 2.0t Mini Pallet Truck is a new product developed by Hangcha for warehouse and logistics applications. With the state-of-the-art permanent magnet brushless drive technology, and the 48V system, features advanced performance, comfortable operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouses, supermarkets, workshops and homes.
A Series Pallet Truck With High Lift 2.0t
- Load Capcity: 2,000kg
- Lift Height: 0~550mm
- Drive Types: Lead Acid Battery
The A series pallet with high lift is a pedestrian pallet truck which can also be used for order picking and light stacking operations. In addition to the support arm lift the load can be raised to an overall height of 675 mm via a simplex mast contained in the battery compartment. This height adjustment is really appreciated when order picking, restocking shelves in retail stores or assembly line activities in manufacturing industries.
A series Hi range pallet truck
- Load Capcity: 2,000-3,000kg
- Lift Height: 0~125mm
- Drive Types: Lead Acid Battery
A series rider pallet truck
- Load Capcity: 2,000-3,000kg
- Lift Height: 0~125mm
- Drive Types: Lead Acid Battery
Pallet Stackers
A series Basic range pallet stacker
-
- 1,200~1,600kg Load Capacity
- 0~4500mm Lift Height
- Lead Acid Battery
A series High Range Pedestrian Pallet Stacker With Initial Lift
-
- 1,200~1,600kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery
The A series pedestrian stacker is a new product developed for warehouse and logistics applications. With the latest AC control technology, it features excellent performance, easy operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouse, supermarket, and workshop.The lithium battery forklift is equipped with the c-series forklift special lithium battery cell and module jointly developed by HANGCHA and CATL, standard power distribution heating function.
A series Mini range pallet stacker
-
- 1,000~1,200kg Load Capacity
- 0~2000mm Lift Height
- Lead Acid Battery
A series mini range pallet stacker (double column)
-
- 1,000~1,200kg Load Capacity
- 0~3600mm Lift Height
- Lead Acid Battery
The A series mini range pallet stacker (double column) has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, it has the strength and durability to minimise your total cost of ownership.
A series Hi range pallet stacker
-
- 1,200~2000kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery
A Series Double-column Pallet Stackers Mini Range II
-
- 1,200~1,600kg Load Capacity
- 0~4500mm Lift Height
- Lead Acid Battery
The A series 1.2t/1.5t mini stackers is a new generation of products designed by Hangcha for warehousing and logistics applications. Using the latest permanent magnet drive technology and with advanced performance, comfortable, safe and reliable operations and low costs, the products are ideal tools for loading, unloading and handling palletized goods in warehouses, supermarkets, workshops and homes.
A Series Mini Range Pallet Stacker With Initial Lift 1.0-1.2t
- The A series mini range pallet stacker with initial lift is a new product developed by Hangcha for warehousing and logistics applications. It has a compact body, and can be operated easily and is suitable for operation in narrow aisles. It can carry out double pallet handling through leg lifting and is ideal for loading in warehouses, supermarkets, and workshops.
A series electric counterbalanced stacker
- Is widely used in pallet stacking, wherever support arm stacker truck cannot operate close pallet and lower pallet. Applied the latest AC drive technology, advanced performance, comfort, safe, reliable, low maintenance cost, easy to operate, and economical to buy is the ideal solution for warehouses, supermarkets, workshop loading/unloading and handling pallets of cargos.
A series high range stand-on pallet stacker with initial lift
- The A Series Pallet Stacker Truck is a new product developed for warehouse and logistics applications. With the latest AC control technology, it features excellent performance, easy operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouse, supermarket, and workshop. The A series pallet stacker with initial lift offers better reachability with its lifting arms.
A series high range stand-on pallet stacker with reach fork
- The A series pallet stacker with reach fork moves goods forward and backward with a scissor fork extension system. It acts as a counterbalanced stacker when its fork is extended, which can handle non-standard pallets, enclosed pallets, and enclosed shelves easily; and acts as a straddle stacker when its fork is retracted, which can operate flexibly in narrow passage.
A series high range stand-on pallet stacker with mast move
- The truck combines benefits of regular stacker and counterbalanced stacker. It can be used for non-standard pallets, enclosed pallets, and enclose shelves. The mast can be retracted into truck body, which reduces passage width required for operation significantly, and the stacker is an ideal vehicle for operation in narrow passage. Cutting-edge AC control technology applied for the truck offers excellent performance, comfortable operation, safety and reliability, and low maintenance cost.
WS Series Electric Pedestrian Stacker
-
- 1,500kg Load Capacity
- 0~3500mm Lift Height
- Lead Acid Battery Drive Types
Reach Trucks
A Series Premium Version Reach Truck
- 1200~2000kg Load Capacity
- 0~13000mm Lift Height
- Li-Ion Drive Types
After several years of design, development, and manufacturing, Hangcha launched a new product lately –the A Series Premium Version Reach Truck： CQD12/14/16/20-AD2H. This truck is mainly used in multi-level warehouse. CQD20-AD2H rated load capacity is 2 tons, maximum lifting height is 12.5m, and the load capacity can reach 1100kg at the maximum lifting height. Its technical parameters and configuration are close to that of similar products of international manufacturers including Crown, Linde, Jungheinrich, and Hyster. This product (A series premium version reach truck) together with standard reach truck constitute the entire family of A Series reach truck of Hangcha. These products supplement with each other in rated tonnage, cover different prices together, and can satisfy different demands in prices, functions, and configuration from various users.
A Series Stand-on Reach Truck 1.5-1.8t Li-Ion
- 1,200~2,200kg Load Capacity
- 0~12500mm Lift Height
- Li-Ion Drive Types
The A series stand-on reach truck is a new-generation product developed by our company in response to different market needs. The truck has comfortable ergonomics, wide operating vision and a stable control system.
Safety
An optimal four-link suspension mechanism forces the drive wheel and the auxiliary wheels, thereby reducing slipping of the drive wheel.
Comfort
Optimal ergonomic design. the steering wheel, operating lever and accelerator are positioned at the best distance to the driver, making the operation lighter more comfortable.
Reliability
The Curtis controller and CAN-bus communication provide safe and reliable.
Maintenance
Traction and lifting system are all adopt maintenance-free AC motor.
A Series Stand-on Reach Truck 1.5-1.8t
- The A series stand-on reach truck is a new-generation product developed by our company in response to different market needs. The truck has comfortable ergonomics, wide operating vision and a stable control system.
A Series Stand-on Reach Truck 2.0-2.5t
- The new A series 2.0-2.5t standing driving forward-moving type is a new product developed by the company for different market needs. The ergonomically-designed comfortable vehicle has wide operating vision and a stable control system, and is further optimized and improved in terms of configuration, parameter, performance, safety, cost, etc., making this product comparable to foreign brands and have obvious advantages when compared with other similar domestic products.
Order Pickers
A Series Medium Level Order Picker 1.0t
- Load Capacity: 1,000kg
- Lift Height: 0~4500mm
- Drive Types: Lead Acid Battery
The A series medium level order picker is a type of high-end truck of warehouse equipment. The truck features complete safety protection system, excellent ergonomic design, and cutting-edge control system. With reliability, stability, comfort, safety, and excellent performance, it is suitable for order picking operations for low and medium-level automatic storage & retrieval system with height below 5m.
A Series High-lift Order Picker 1.2t
- Load Capcity: 1,200kg
- Lift Height: 0~9500mm
- Drive Types: Lead Acid Battery
The A Series high-lift order picker, a high-end warehouse equipment, provides a comprehensive safety protection system, excellent ergonomics design and advanced control system. Being reliable and stable, comfortable and safe, and along with excellent performance, it is a perfect option for cargo picking in stereoscopic warehouse that is 5m to 10m high.
Low-level order picker
- Load Capcity: 2,500kg
- Lift Height: 0~125mm
- Drive Types: Lead Acid Battery
A series low-level order picker is mainly applied in long-distance trans portation among the production lines. Low operator platform for frequent and effortless entry and exit. Thanks to the standing design, it can greatly improve the efficiency of operations. Furthermore, for indoor application, the electric drive system is environmental friendly within the workshop. Therefore, this product is a good partner of automobile manufacturing, logistics companies, warehouses and other places, fields which has broad application prospects.
Tow Tractors
X Series Electric Platform Truck 1.0-5.0t
- The X series electric platform truck is a new series of products independently developed by Hangcha. With exterior design, safety, reliability, advancement and comfort, etc. reaching the level of the world's advanced brands and featuring high speed, high efficiency and high safety, it is an ideal choice for the short- and medium-distance goods handling at railway stations, vehicle companies, etc.
A Series 3.0-5.0t Electric Tow Tractor
- HANGCHA A series 3.0-5.0t electric tow tractor is mainly applied in short-distance transportation among the production lines. Low operator platform for frequent and effortless entry and exit. Thanks to the standing design, it can greatly improve the efficiency of operations. Furthermore, for indoor application, the electric drive system is environmental friendly within the workshop. Therefore, this product is a good partner of automobile manufacturing, logistics companies, warehouses and other places, fields which has broad application prospects.
A Series Electric Tow Tractor 2.0-6.0t
- As for A series of tractors, the advanced AC drive control technology is adopted for the complete tractor. The tractor has excellent performance, can be operated comfortably, is safe and reliable, has low maintenance cost and is the high-efficiency tool for resolving material transport among different zones for the workshops, flow lines and large factories.
X Series Electric Tow Tractor 6.0-10t
- Load Capcity: 6,000~10,000kg
- Drive Types: Lead Acid Battery
X Series Electric Tow Tractor 20-40t
- Load Capcity: 20,000~40,000kg
- Drive Types: Lead Acid Battery
X Series Internal Combustion Tractor 2.0-3.0t
- Load Capcity: 2,000~3,000kg
- Drive Types: Diesel
Representing the design concept of safety, reliability, comfort and environmental protection, the X series 2–3 ton internal combustion tractor has been completely improved in safety, comfort and reliability through a new design and the performance of the vehicle has been greatly improved compared with the prior products.
X Series Internal Combustion Tractor 3.5-8.0t
- Load Capcity: 3,500~8,000kg
- Drive Types: Diesel
AERIAL PLATFORMS
Vertical Mast Lift
- 0~210kg Load Capacity
- 0~11220mm Lift Height
- Lead Acid Battery Drive Types
The HANGCHA HV110D is a jib machine that offers outreach capability to get virtually any job done. A 130° rotating jib and 345° non-continuous hydraulic turntable allows for exceptional range of motion and precise positioning. These capabilities combined with the efficient electric drive motors and a low machine weight make the HANGCHA HV110D lift the solution for hard-to-reach jobsite needs. It has the characteristics of compact body size, small turning radius, good handling performance and strong endurance. It is mainly used in warehouse, exhibition hall, aircraft maintenance, mechanical equipment installation, equipment maintenance and other fields.
Anti-overturning system
When the machine raises, this system will open automatically, to protect the machine from overturning while walking at un-leveling ground.
Safety
Alloy steel axis, to make sure the safety, reliable and efficient.
Internal charger
You can charge the battery directly, do not need to remove it from machine.
The working scope
It can go to the working area rapidly trough lifting, lowering, traveling forward and backward, turret turning, etc.
Self-leveling sensor
When the degree is more than 2.5°, it will alarm.
The proportional control system
Control the speed of traveling, lifting and turret turning as you need.
Articulation Boom Lift
- 230~250kg Load Capacity
- 0~5600mm Lift Height
- Lead Acid Battery Drive Types
The working height can perfectly adapt to the needs of building working.
Mini Size
The compact size makes the machine gets into the elevator with free access.
Light Weight
The weight is very light, which can meet the load limit of elevator and better protect the ground.
Large Capacity
Though the self-weight is light , it has a large capacity, the machine can allow two peoples working together.
High Efficiency
Equipped with efficient fully electrified DC drive system, more durable.
Low Failure Rate
Simple and clear system, drawer structure, easier maintenance, lower use cost.
High Rewarding
Transport and procurement costs are lower, and rental prices are comparable to regular models.
Green Environment Protection
Electric drive walking system, zero emission, low noise, more suitable for indoor use.
Mini Self-propelled Scissor Lifts (Electric Motor Drive)
- 230~250kg Load Capcity
- 0~5600mm Lift Height
- Lead Acid Battery Dirve Types
The working height can perfectly adapt to the needs of building working.
Mini Size
The compact size makes the machine gets into the elevator with free access.
Light Weight
The weight is very light, which can meet the load limit of elevator and better protect the ground.
Large Capacity
Though the self-weight is light , it has a large capacity, the machine can allow two peoples working together.
High Efficiency
Equipped with efficient fully electrified DC drive system, more durable.
Low Failure Rate
Simple and clear system, drawer structure, easier maintenance, lower use cost.
High Rewarding
Transport and procurement costs are lower, and rental prices are comparable to regular models.
Green Environment Protection
Electric drive walking system, zero emission, low noise, more suitable for indoor use.
Self-propelled Electric Scissor Lifts
- 230~450kg Load Capacity
- 0~13700mm Lift Height
- Lead Acid Battery Drive Types
HANGCHA self-propelled electric scissor lifts are the high efficient, safe and ideal solution for modern industry. Ideal for maneuvering in tight Spaces, they're excellent for indoor and outdoor application, all the functions, lifting, lowing, steering, forward and backward are under operator's control. Easy maintenance and service after opening the battery cover, all key parts are easy access. With low noise level, and high reliability, HANGCHA self-propelled electric scissor lifts are always your best partner.
Application
Stations, dock, airport, power station, gym, big company ect.
Characteristics
The proportional control system: Control the speed Of Traveling and lifting as you need. Extension deck: You can reach the working place by the Extended platform. Safety: Alloy steel axis, to make sure the safety, reliable and efficient.
XB Series Pallet Truck With Scissor lift
- 500~2,000kg Load Capacity
- 0~2000mm Lift Height
- Lead Acid Battery Drive Types
High structural strength
High strength rectangular tube, Self-lubricating nylon slider, long service life and stable performance.
High performance
Permanent magnet motor, One-piece hydraulic power pack, colloidal maintenance-free battery, high performance,stable and efficient.
Reliability
Side support system, one-way throttle valve on lifting hydraulic cylinder, Waterproof connector, safety and reliability in performance.
Safety
Three emergency braking functions, emergency reverse button on Joystick, electronic lift limit, ensure the safety of personnel and cargo.
Maintenance convenience
The battery is removed from the side of chassis, One piece plastic cover, easy to maintaining.
Diesel Articulated Boom Lift
- 0~230kg Load Capacity
- 16700~22000mm Lift Height
- Lead Acid Battery Drive Types
High structural strength
High strength rectangular tube, Self-lubricating nylon slider, long service life and stable performance.
High performance
Permanent magnet motor, One-piece hydraulic power pack, colloidal maintenance-free battery, high performance,stable and efficient.
Reliability
Side support system, one-way throttle valve on lifting hydraulic cylinder, Waterproof connector, safety and reliability in performance.
Safety
Three emergency braking functions, emergency reverse button on Joystick, electronic lift limit, ensure the safety of personnel and cargo.
Maintenance convenience
The battery is removed from the side of chassis, One piece plastic cover, easy to maintaining.
A Series Storage Assist Vehicle
- Load Capcity: 150~227kg
- Lift Height: 5600~14000mm
- Drive Types: Lead Acid Battery
It has the characteristics of compact body size, small turning radius, good handling performance and strong endurance. It is mainly used in warehouse, exhibition hall, aircraft maintenance, mechanical equipment installation, equipment maintenance and other fields.
E-TRUCKS
3 wheel Forklift Truck
X Series 0.6-1.0t
- 600~1,000kg Load Capacity
- 0~4500mm Lift Height
- Lead Acid Battery Drive Types
Hangcha’s X series 0.6-1.0t 3W electric forklifts are a new series of high-efficiency, energy-saving small-tonnage electric counterbalanced forklifts with a new structure that represents a breakthrough over the traditional design concept. With a compact structure, small turning radius and light weight and high maneuverability, the truck is widely used in narrow operation places, e.g., used for handling between floors, to and from elevators or in warehouses, supermarkets, workshops, etc.
Appearance
The whole truck is small and flexible, adopting a combination of straight lines and streamlined curved surfaces, with a simple appearance and strong strength.
Comfort
Excellent ergonomic design and large operation space provide the operator with more comfort, and satisfy the operator’s needs for long-term and high-intensity operations. Safety
The emergency power-off switch complies with European safety standards.
Advancement
Full AC motors, precise speed control, maintenance-free , temperature monitoring.
A Series 1.3-2.0t
- 1,300~2,000kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
Comfort
Both the steering column and seat can be adjusted easily, every operator can find the best driving position.
Stability
Sinking type battery layout provides good stability especially during cornering.
Safety
Emergency switch is standard specification which meets the Euro safety regulation.
Maintenance
Full opened battery cover is easy for battery service and changing.
A Series 1.5t
- 1,500kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
A series 1.5t rear-wheel driving three pivot electric forklift truck is very suitable for operating in limited space, with small turning radius, which is the ideal forklift truck in store, supermarket and warehouse, etc.
Ergonomic
State-of-the-art design makes a clear footwell with wellplaced pedals which give plenty of room for large feet space and help the driver's comfort working.
Reliability
AC motor is the simple brushless motor, less maintenance and better suitability for wet and explosive conditions.
Side battery change
24V battery is ideal for two or three shifts requirements, and side battery change is a perfect option to change the batteries quickly.
4 Wheel Forklift Truck
A Series 1.0-3.5t (Four Wheel)
- 1,000~3,500kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
Stability
Advanced parallel layout of drive motor and lower located battery up to chassis bottom provide good stability to the truck.
Comfortable
New designed wide view mast provides better forward view ability.
Advanced
Multi functions big LED dashboard provides running hours, battery power, and self diagnosis functions, and with high accuracy even in bad environment.
Service Ability
CE certificate is available.
A series 2.5-3.5t (Four Wheel, High-Performance)
- 2,500~3,500kg Load Capcity
- 0~7500mm Lift Height
- Lead Acid Battery Dirve Types
New A series of high-performance electric forklift whichcovers from 2. 5t to 3. 5t,is the key promoting product of Hangcha in 2015. lt is based on the already available for A series electric forklift, mainly to meet the requirements of efficiency first, fast lifting and driving speed, high capacity battery, excellent ergonomic, easy operation and operating safety.
Main parts
Motor controllers, connectors, power plug, emergency switch, dashboard, accelerator are all applied world famous brands, ensure the reliability of good performance and provide easy service. Emergency switch is standard specification which meets the Euro safety regulation.There is overloading protection for eletronics and hydraulic system.The whole truck meets CE certificate.
Excellent Ergonomic
New Big LED dashboard is easy to see, with comprehensiveindicator lights,and provides friendly human-computer interaction.The operator can monitor the truck operation at a glance.
Easy operating and maintenance
The key controllers are all sealed in the counterweight, dust and water free.Selfcooling traveling motor with lP20 protection has good reliability. Protection grade of the whole forklift is IPX3.
Safety
Suspension seat use high-class Grammer MSG65, which has the OPS function of locking forklift truck' s forward/backward, mast' s lifting/lowing, tilting and side shifting etc. Parking brake with buzzer, which means when parking brake is released at Key off position, the buzzer is operated. Steering wheel, armrest and reversing handle are all equipped with horn button, which can warn surrounders. PIN code access system with 99 passwords can be set, provides easy management.
A Series Dual Drive Electric Forklift
- 2,000~3,500kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
Maneuverability
Driven by two motors independently, the front wheels can rotate forwards and backwards with a small turning radius and have good maneuverability. An imported reduction gearbox is provided. The high-power drive motors provide strong and reliable driving force.
High Efficiency
A high-power oil pump motor is used. The large-displacement silent gear pumps improve the lifting speed and operation efficiency.
Comfortable
New designed wide view mast provides better forward view ability.
Advanced
High frequency MOSFET controller provides accurate control of traveling, lifting, and better adjustable performance, and better matches the motor. Regenerative braking, reverse current braking and anti-slide on slop function guarantee the operation safety.
A series 4.0-4.99t (Four Wheel)
- 4,000~4,990kg Load Capcity
- 0~6000mm Lift Height
- Lead Acid Battery Dirve Types
Stability
The internationally advanced parallel arrangement is adopted for traction motor, and the battery is sunken to chassis, resulting in lower gravity center and better stability of entire truck.
Comfort
The adjustable, small-diameter steering wheel with tilt designed based on ergonomics offers good hand feeling, and the seat can also be adjusted forward and backward, which can provide best driving position for the operator.
High performance
Soft landing system lowers descending speed automatically when fork reaches the height range of 100-60mm from the ground, so as to reduce vibration of the entire truck, and provide effective protection for goods.
Maintenance
Fully-openable cover enables easy maintenance of battery.
A Series 12-16t (Four Wheel)
- 12,000~16,000kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
The electric forklift truck, with key parts of associated products from world-renowned manufacturers, features excellent performance, reliability and durability, high safety, as well as elegant, steady, simple but bright appearance. The product can be applied for a wide range of purposes, and is suitable for various working conditions including indoor and outdoor spaces.
Hydraulic System
The system is equipped with electro-hydraulic proportional sectional valve of world-renowned brand, silent gear pump, pilot electric control handle, and AC oil pump motor. The load sensing hydraulic system reduces continuous load on oil pump motor; the remote electric control operating mode is simple, easy, and flexible. Several hydraulic pressure detection points are added to simplify maintenance and service work.
Mast System
The duplex mast has increased width, higher resistance to torsion, and broader view; oil circuit with dual governing valves features higher safety. Hydraulic fork width adjustment is a standard configuration.
Braking System
The system is equipped with Poclain hydraulic brake valve, multi-plate wet travel brake and spring action, and hydraulic release caliper disc parking brake system.
Steering System
The system is equipped with horizontally placed oil cylinder steering axle of single dual-action oil cylinder, features fully hydraulic power steering, steering priority, with load sensing function, and can realize easy steering.
A series 14-16t (Four Wheel)
- 14,000~16,000kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
The electric forklift truck, with key parts of associated products from world-renowned manufacturers, features excellent performance, reliability and durability, high safety, as well as elegant, steady, simple but bright appearance. The product can be applied for a wide range of purposes, and is suitable for various working conditions including indoor and outdoor spaces.
Hydraulic System
The system is equipped with electro-hydraulic proportional sectional valve of world-renowned brand, silent gear pump, pilot electric control handle, and AC oil pump motor. The load sensing hydraulic system reduces continuous load on oil pump motor; the remote electric control operating mode is simple, easy, and flexible. Several hydraulic pressure detection points are added to simplify maintenance and service work.
Mast System
The duplex mast has increased width, higher resistance to torsion, and broader view; oil circuit with dual governing valves features higher safety. Hydraulic fork width adjustment is a standard configuration.
Braking System
The system is equipped with Poclain hydraulic brake valve, multi-plate wet travel brake and spring action, and hydraulic release caliper disc parking brake system.
Steering System
The system is equipped with horizontally placed oil cylinder steering axle of single dual-action oil cylinder, features fully hydraulic power steering, steering priority, with load sensing function, and can realize easy steering.
Electric System
The full AC controller of state of the art in the world is adopted, achieving electronic control for traveling, lifting, braking, and steering actions of the forklift. It features smooth and accurate control, superior speed regulation performance, with regenerative braking, reverse braking, and anti-slipping on slope and other functions, enabling more effiective operation, higher safety and comfort. The MMI instrument of world-leading brand is adopted, with large screen LCD battery indication, timing, failure self-diagnosis, and mode selection, and accurate display even in severe environment. The LED lighting system is adopted for energy saving.
AE Series 1.5-3.5t (Four Wheel)
- 1,500~3,500kg Load Capacity
- 0~7000mm Lift Height
- Lead Acid Battery Drive Types
Independently developed by Hangcha on the basis of more than 30 years of electric forklift research and development and accumulated manufacturing technology, the AE series electric forklifts are a new series of high-efficiency and energy-saving electric counterweight forklifts with a new structure that represents a breakthrough over the traditional design concept. The research and development of control and power systems are innovated and the product exterior, ergonomics, reliability, maintenance and other aspects are optimized, so that the performance of the vehicle is greatly improved.
Appearance
With a profile formed by a combination of straight lines and streamlined curved surfaces, the truck is compact and maneuverable and has simple and sturdy appearance.
Comfort
The cover is sealed with a good effiect of rain resistance.
Safety
The optional lowering lock function can improve the safety greatly when the driver leaves the seat.
Maintenance
The front-opening hood design makes charging and maintenance easier.
Advancement
The controller, oil tank and pump motor are all placed at the front to enable small pipeline length and less energy loss.
X series 1.0-3.5t (Four Wheel)
- 1,000~3,500kg Load Capacity
- 0~7000mm Lift Height
- Lead Acid Battery Drive Types
Independently developed by Hangcha on the basis of more than 30 years of electric forklift research and development and accumulated manufacturing technology, the AE series electric forklifts are a new series of high-efficiency and energy-saving electric counterweight forklifts with a new structure that represents a breakthrough over the traditional design concept. The research and development of control and power systems are innovated and the product exterior, ergonomics, reliability, maintenance and other aspects are optimized, so that the performance of the vehicle is greatly improved.
Appearance
With a profile formed by a combination of straight lines and streamlined curved surfaces, the truck is compact and maneuverable and has simple and sturdy appearance.
Comfort
The cover is sealed with a good effect of rain resistance.
Safety
The optional lowering lock function can improve the safety greatly when the driver leaves the seat.
Maintenance
The front-opening hood design makes charging and maintenance easier.
Advancement
The controller, oil tank and pump motor are all placed at the front to enable small pipeline length and less energy loss.
X Series 4.0-5.0t (Four Wheel)
- 4,000~4,990kg Load Capacity
- 0~7000mm Lift Height
- Lead Acid Battery Drive Types
Stability
The drive motor is arranged in parallel, the battery is placed at the bottom of the vehicle frame, the wheelbase and rear wheel pitch are increased, the swing point of the steering axle is raised, and the distance between the front of the fork and the front axle is reduced, to enable excellent stability.Comfort
In accordance with the ergonomically design, the wheelbase is increased to enable enlarged leg space. The radius of the hand wheel is reduced to 300mm and the seat can be adjusted backwards and forwards, so that the operator can choose the best driving position.Advancement
The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc., and high safety and reliability.Safety
The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.
Maintainability
The fully opened hood quite facilitates the maintenance of the battery, oil pump motor and electric control assembly.
X Series 6.0-10t (Four Wheel)
- 6,000~10,000kg Load Capacity
- 6000mm Lift Height
- Lead Acid Battery Drive Types
Stability
Small-diameter solid tires, front and rear battery sets and other technologies are used to enable excellent stability of the vehicle.Comfort
The inclination angle of the ergonomically designed hand wheel is adjustable and the seat can be adjusted 150mm forwards and backwards, so that the operator can choose the best driving position.Safety
The optimized design of the wide-view mast, wide-view overhead guard and low dashboard enables a broader view of the operator and higher safety.Maintainability
The innovative two-door structure with one door, respectively, on the left and right sides of the forklift easily facilitates the maintenance of the motor, oil pump and electric control of the forklift and enables good resistance to dust and water.Advancement
The high-frequency MOSFET integrated controller ensures smooth and accurate driving and lifting control, and has excellent speed regulation performance, good performance of electronic control matching the motor, functions of regenerative braking, reverse braking and anti-sliding on ramps, etc. and high safety and reliability.
IC - TRUCKS
A Series IC Forklift Truck
A series 1.0-3.8t Internal Combustion Counterbalanced Forklift Truck
- 1,000~3,800kg Load Capacity
- 0~6000mm Lift Height
- Diesel Drive Types
Appearance
Based on around 10 years Nissan technology applied on HC trucks, and HANGCHA own R and H series, the new A series is fully own researched truck. The improved new outline, safety, comfortability, and reliability, all these provide better performance to the trucks.
Comfortable
The same ergonomic technology as R series has been adopted. The smaller steering wheel, extra space for foot and operator space, wider forward visibility, all these improve operator's comfort and release operator's fatigue.
Safety
Thanks to the long wheelbase design, the longitudinal stability of whole truck is improved, the residual load capacity at same height is improved greatly. At the same time, it prolongs the working life time of steering tire by reducing the rear axle load.
Reliability
The aluminum ribbon-tubular radiator with large capacity and the optimized cooling system fu rather enhance the heat dissipation capability of the whole truck to ensure the reliability of the engine.
Outline
Applied the advanced outline designing method, the truck is designed with stream, sporty outline, and thanks to the new design, all the exposed parts are metal made. which is firm and reliable.
A series 4.0-5.0t Internal Combustion Counterbalanced Forklift Truck
- 4,000~5,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Appearance
With the newest appearance design method, the whole forklift has smooth profile lines, presents the dynamic effect, and meets the newest appearance design fashion.
Comfortability
With the man-machine engineering technology same to that for R series, the space for legs and boarding is larger, the operating vision is extended. The operating comfortability is greatly improved, and the fatigue strength of the operator is reduced.
Safety
With the long axle base design, the whole forklift has better longitudinal stability. At the same lifting height, compared with the original forklifts, the lifting capacity is improved by great degree. Meanwhile, the rear axle load is reduced, and the life of the steering tyres is extended.
Reliability
With the thicker rear leg of the overhead guard, the engine air admission quantity is increased, the air admission resistance is reduced. The engine can conduct more sufficient combustion, and the engine life is extended.
A series 5.0-7.0t Internal Combustion Counterbalanced Forklift Truck
- 5,000~7,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
The A series is a novel series of internal combustion counterweight forklifts, which is independently developed by Hangcha by learning Japanese Nissan’s technologies and on the basis of the prior products. Through comprehensive optimization of the exterior design, safety, comfort and reliability, the performance of the vehicle has been greatly improved in comparison with the prior products.
Appearance
With the latest exterior design method used, the vehicle has a smooth vivid profile following the latest exterior design trend.
Comfortable
Advanced ergonomic technology, an integral engine hood, a steering wheel of a smaller size and an enlarged space for the pedaling foot are used to significantly improve the operation comfort and reduce the operator’s fatigue.
Safety
The center of gravity of the vehicle moves backward to enable the higher longitudinal stability and high-position operation stability of the vehicle.
Reliable
The large-capacity aluminum plate-fin heat dissipater has optimized heat dissipation channels. The integrated transmission oil and engine coolant heat dissipater and intercooler provide a good heat dissipation capacity.
A series 8.0-10t Internal Combustion Counterbalanced Forklift Truck
- 8,000~10,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
The A series is a novel series of internal combustion counterweight forklifts, which is independently developed by Hangcha by learning Japanese Nissan’s technologies and on the basis of the prior products. Through comprehensive optimization of the exterior design, safety, comfort and reliability, the performance of the vehicle has been greatly improved in comparison with the prior products.
Appearance
With a new exterior design method used, the vehicle has a smooth vivid profile following the up-to-date exterior design trend. The vehicle is compact in appearance, and the exposed parts are robust and reliable metal parts.
Comfort
Advanced ergonomic technology, an integral engine hood, a steering wheel of a smaller size and an enlarged space for the pedaling foot are used to significantly improve the operation comfort and reduce the operator’s fatigue.
Safety
The center of gravity of the vehicle moves backward to enable the higher longitudinal stability and high-position operation stability of the vehicle.
Reliable
The large-capacity aluminum plate-fin heat dissipaters are used as the hydraulic oil, transmission oil, engine coolant heat dissipaters, and the intercooler. These dissipate heat well.
A2 Series Internal Combustion Forklift
- 1,500~3,800kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
New Design
Inherit the exterior design of Hangcha’s A products and integrate innovation in classic style, thus the vehicle has a smooth vivid profile and a sturdy design. The newly designed semi-enclosed instrument console make the entire forklift look compact and stylish.Safety and Reliability
The vehicle has an optimized layout design, reduced front overhang, lowered center of gravity and improved stability of the entire forklift. The new channel steel, ultra-wide-view mast and lowered dashboard in the cab broaden the front view of the driver significantly. Profiled steel overhead guard features high strength with good sealing of the cab.Comfort and Convenience
Standard seat with an adjustable backrest has good packaging and anti-slip design, enabling a more comfortable driving and sitting experience. The low-angle accelerator pedal reduces the driver’s fatigue. Integrated light combination switch makes the operation more convenient.
A Series 12-16t Internal Combustion Counterbalanced Forklift Truck
- 12,000~16,000kg Load Capacity
- 6500mm Lift Height
- Diesel Drive Types
Exterior and Performance
The upper surfaces of the large locked toolbox and counterweight on the left and right sides of the vehicle body are designed to be fully flat to enable a large storage space.Reliability
The high-power plate-fin heat dissipater and independent hydraulic oil heat dissipater have been subjected to heat balance test verified under two kinds of operating conditions - typical operating conditions and no-load maximum-speed long-distance driving conditions, to ensure the normal operations of the system under various operating conditions.A Simple and Efficient Hydraulic System
The fully hydraulic load sensing steering system makes steering easier and more flexible. Two pumps are used to enable merging and less pressure loss and energy consumption..Maintenance
With the LCD instruments to display the relevant information of the vehicle which emit an alarm for an engine fault, the running status of the vehicle can be monitored and fault queries can be performed to facilitate problem analysis.
X Series IC Forklift Truck
X series 1.5-3.8t Internal Combustion Counterbalanced Forklift Truck
- 1,500~3,800kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
The X series is the new series of internal combustion counterbalance forklift truck developed by Hangcha independently, adopting the world advanced technologies based on the original products. Through the comprehensive upgrading of appearance molding, energy conservation, environmental friendly, comfort, security and reliability, it will become the world-class forklift truck which can meet your overall demands.
Comfort
Adopt the new-type of box iron. Increase the inside width of inner mast and the spacing between lifting cylinders. The lowering of instruments in the cabin will greatly increase the forward visibility; The rear visibility will also be greatly improved through the optimization design of counterweight.
Reliability
2.0~3.8t roller bearing on the steering axle king pin adopts large size tapered roller bearing (TRB), larger steering cylinder and bumper block assemblies on the top, which can prolong the service life of bearing and highly improve the reliability of steering axle.
Maintenance The enlarged opening angle of hood and increase of left and right hood side plates can provide you with convenient and rapid maintenance mode.
X series 5.0-10t Internal Combustion Counterbalanced Forklift Truck
- 5,000~10,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
The X series is the new series of internal combustion counterbalance forklift truck developed by Hangcha independently, adopting the world advanced technologies based on the original products. Through the comprehensive upgrading of appearance molding, energy conservation, environmental protection, comfort, security and reliability, it will become the world-class forklift truck which can meet your overall demands.
Reliability
The radiator adopts aluminous plate-fin radiator with better performance and higher structural strength. Impendent oil radiator, optimized oil and water heat dissipation channel and double ventilation holes on counterweight can greatly improve cooling efficiency and reliability of overloaded operation and ensure reliable operation of the engine.
Intelligentized management system (option)
Reserved plug of extending function of Intelligent module is on the wire bundles that makes truck management more convenient and rapid.
Energy conservation and environmental protection
The whole truck adopts LED lights as shiner and new-type panoramic retroreflector to ensure energy conservation and power saving as well as greatly improve the performance and service life of luminaires at the same time.
X series Diesel Forklift Truck For Work In Container
- 5,000~10,000kg Load Capacity
- 0~3600mm Lift Height
- Diesel Drive Types
Vehicle warranty period
The warranty period is prolonged to 2 years or 4000 hours (except for vulnerable parts), where the expiring period will prevail.
Vehicle features
The vehicle is designed to have a sturdy exterior with novel streamlined curved surfaces and a prominent and innovative inside. With a free duplex mast for the standard configuration and optional masts of multiple specifications for inside-container operations, the highly-adaptable vehicle has a low height and a narrow body appropriate to inside-container operations and meets the other requirements for operations in low and narrow environments.
Vehicle-mounted video system
The 8.5-10t vehicle is equipped with a front and rear cameras–equipped with a vehicle-mounted video system for the standard configuration to broaden the front and rear operating views.
LCD instruments with clear display
The newly developed LCD instruments have more comprehensive functions and more stable performance and can completely display important information such as the running status of the vehicle, engine failure, etc., so that the operator can more clearly know the status of the vehicle and the maintenance becomes easier.
New-generation integrated electrical box
A new-generation integrated electrical box with reasonable layout is used, which can be maintained and repaired easily and has better waterproof performance.
The vehicle can operate inside a container
The vehicle has a low height and a narrow body appropriate to inside-container operations and meets the other requirements for operations in low and narrow environments.
X series 12t Internal Combustion Counterbalanced Forklift Truck
- 12,000kg Load Capacity
- 0~6500mm Lift Height
- Diesel Drive Types
The X series is the new series of internal combustion counterbalance forklift truck developed by Hangcha independently, adopting the world advanced technologies based on the original products. Through the comprehensive upgrading of appearance molding, energy conservation, environmental protection, comfort, security and reliability, it will become the world-class forklift truck which can meet your overall demands.
Energy conservation and environmental protection
The whole truck adopts LED lights as shiner and new-type panoramic retroreflector to ensure energy conservation and power saving as well as greatly improve the performance and service life of luminaires at the same time.
Fully improved reliability and security
The radiator adopts aluminous plate-fin radiator with better performance and higher structural strength. Impendent oil radiator, optimized oil and water heat dissipation channel and double ventilation holes on counterweight can greatly improve cooling efficiency and reliability of overloaded operation and ensure reliable operation of the engine.
Maintenance
The enlarged opening angle of hood and increase of left and right hood side plates can provide you with convenient and rapid maintenance mode.
Comfort
Adopt the new-type of box iron. Increase the inside width of inner mast and the spacing between lifting cylinders. The lowering of instruments in the driving cab will greatly increase the forward visibility; The rear visibility will also be greatly improved through the optimization design of counterweight.
X Series IC Forklift Truck For Work In Stone Industry
- 5,500kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
The Yuchai common rail engine has strong power and low fuel consumption
High torque at low speeds, good performance of acceleration at medium and high speeds. Bosch’s non-road special common rail system has good oil adaptability. A long oil change interval enables a low use cost.A special gearbox of a domestically renowned brand
The customized 16t special gearbox has a large capacity, high efficiency and good traction performance. The PTO outputs high torque and can be matched with a large-displacement gear pump. The electronic steering provided for the standard configuration makes operations easier.Domestic heavy-duty caliper drive axle
The caliper brake provides fully hydraulic power braking and large braking force. The integrally-cast axle housing has good strength. With a main gearbox for heavy-duty trucks, mature and reliable. The input shaft cable-type central parking brake is simple and reliable and can be operated easily.Easy Maintenance
The wide-open hood, water tank lid, left and right hood side panels, and front bottom panel can be removed easily. A cloud smart module provided for the standard configuration enables remote control and diagnosis.
Sideloader Forklift
- Load Capcity: 3,000~6,000kg
- Lift Height: 3600mm
- Drive Types: Diesel
The side forklift is a special type of industrial vehicle. The main difference between it and the general counterbalanced front forklift is that the working device of the side fork is installed on the side of the vehicle body. In addition to being able to lift and tilt, it can also extend and Income.
XF Series IC Forklift Truck
XF series 1.0-3.5t Internal Combustion Counterbalanced
- Load Capcity: 1,000~3,500kg
- Lift Height: 0~7000mm
- Drive Types: Diesel
XF2 Series IC Counterbalanced Trucks
- Load Capcity: 1,500~3,500kg
- Lift Height: 0~7000mm
- Drive Types: Diesel
XF2 Series IC Counterbalanced Trucks
- 1,500~3,500kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Appearance
A vivid and sturdy exterior inheriting the classic design, embodying innovative ideas, and bringing a strong high-tech impact.All-round visibility
Optimized design provides outstanding visibility in all directions.Comfortable
The fully-suspended gearbox, fully-suspended overhead guard, and fully-suspended seat realize three-stage vibration reduction to reduce vibration of the vehicle.Reliable
A wet axle is developed and used to significantly improve the reliability of the braking system and force transmission structural parts. (Wet brake, custom high-strength bolts, wheel side planetary reducer).Electrical system
The new-generation high-efficiency energy-saving novel combination LED lighting system is energy-saving, while the performance and service life of the lights are significantly improved.
XF series 4.0-5.5t Internal Combustion Counterbalanced Forklift Truck
- 4,000~5,500kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Reliability
XF series features rugged design, stamped frame and engine hood, stamped instrument panel and head guard, heavy profile rail mast combine to provide excellent rigidity, which ensures outstanding reliability even in heavy-duty work.Productivity
The new Dynamic load sensing hydraulic steering system contributes to reduce loss of hydraulic and improve energy efficiency.
Comfortable
The new automobile-style light/turn-signal lever and forward-reverse lever are ergonomically designed and arranged to improve comfort and productivity. The new, relocated easy-to-see LCD meter lets the operator check on all aspects of operational status at a glance.
Safety
A throttling device is adopted to avoid the mast being out of control even some pipes are broken.
XF series 5.0-7.0t Internal Combustion Counterbalanced Forklift Truck
- 5,000~7,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Comfortable
The extra foot space is provided to reduce operator fatigue significantly. The new wide-open, non-slip step makes getting in and out easy and safe. The optional Electro-hydraulic proportional control system contributes more sensitive and precise load handling. The easy-to-operate levers provide total load handling operation. An armrest is provided to reduce fatigue.
Productivity
By optimizing transmission design, the power train provides higher efficiency, and the Max. driving speed is increased 20%.
Reliability
The new stamped air cleaner featuring tangential intake, double seal with safety filter is durable, corrosion-free and vibration-resistant, provides better filter efficiency and lower intake resistance than the previous.
Maintenance
The rotating LPG bottle holder is easy to replace the bottle, reduces the downtime.
Safety
There's an energy accumulator applied in the braking system, which means when the engine is shut down,it can also provides more than 4 times emergency brake.
XF series 8.0-12t Internal Combustion Counterbalanced Forklift Truck
- 8,000~12,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Comfortable
In developing the new XF 8-12t series,comfort and easy operation is always considered, for example, inproved vibrating levels, compound engine damper and full floationg seat and cabin are applied.
Productivity
By optimizing transmission design, the power train provides higher efficiency, and the Max. driving speed is increased 20%.
Environmental Friendliness
Special developed engine is applied for optimum balance of power and superior environmental performance. AII diesel engines are in com-pliance with EU stage-lll control regulation. The environment friendly materials, such as non-asbestosbrake shoe and new type sealing gasket, are adopted entirely to meet environmental safety.
Maintenance
All the locations of the engine oil level dipstick, filter of hydraulic,water separator are easy to reach,and very easy for engineer to check.
Reliability
High strength chassis,mast and front/rear axle are to make sure the reliability of the truck,even for high strength application.
Heavy IC forklift truck
12-16t Internal Combustion Counterbalanced Forklift Truck
- 12,000~16,000kg Load Capacity
- 0~6000mm Lift Height
- Diesel Drive Types
Drive Axle
Made in China, HANGCHA-customized, heavy-duty master reducer, pneumatic brake system.Gear-box
Imported gear-box, multi-stage torque converter, big converter ratio, wide range of auto-adjust speed; stable and smooth shift, 2 stage forward and 1 stage backward, easy operation and maintenance.Steering System
HANGCHA-made crosswise steering axle; The steering with load sensor and adjustable steering device make the operation easily.Hydraulic System
Multi-hydraulic valve make it easy to operate. Load sensor hydraulic system, dual pumps supply, dynamic load sensor priority valve, reduce power consumption, lower the hydraulic oil temperature.Chassis
The combined chassis structure provide the high intensity and low weight feature, increase the cooling area of the oil tank greatly.Power System
The customer can choose Cummins turbo 6 cylinder engine or Yuchai engine which according with the GB3 Emission Regulation, high performance, low oil consumption, low speed with high torque, great capacity cooler.
20-25t Internal Combustion Counterbalanced Forklift Truck
- 20,000~25,000kg Load Capacity
- 0~6500mm Lift Height
- Diesel Drive Types
Power System
Cummins QSC8.3 supercharged engine,Emissions comply with EPA 3 and EU III requirements; High performance, low energy consumption, low speed with high torque,great power reserves. And the engine is equipped with big dimension radiator and suction fan, it reduce the temperature of inlet air and ensure the reliability of cooling system. Using the special peripheral accessories recommended by Cummins,ensure the normal use and maintenance of the engine.
Transmission System
ZF micro controller with 3 stage power-shift is to make sure the high reliability. Using the most advanced TCU microelectronic control transmission proportional control valve to achieve uninterrupted power output and automatic transmission, no need the driver manual shift operation. Fault display and convenient diagnostic socket, greatly simplifying maintenance and repairs. German Kessler heavy load drive axle, with two stage speed adjust, multi-disc wet service brake system, is fully enclosed system with maintenance free.
Hydraulic System
International famous brand hydraulic valve,the main hydraulic pump, the guide handle.Load sensing hydraulic system, reduce the continuous load of engine ; Remote hydraulic control and electric control are simple and convenient. Multiple hydraulic testing points simplify the maintenance work.
Brake System
USA MICO hydraulic power brake, wet multi-disc service braking and spring action, caliper disc parking brake system with forced cooling by oil, is safe and reliable.
Cabin
Integral full suspension tilting cabin, connected with the frame through damping rubber, which can shield most of vibration and noise. The tilted cabin which configured wide vision, suspension seat, electric control and hydraulic control joystick, is simple and easy for operation and maintenance. It provides alarge space for drivers legs.
28-32t Internal Combustion Counterbalanced Forklift Truck
- 28,000~32,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Power System
Cummins QSC8.3 supercharged engine, Emissions comply with EPA 3 and EU III requirements; High performance, low energy consumption, low speed with high torque, great power reserves. And the engine is equipped with big dimension radiator and suction fan, it reduce the temperature of inlet air and ensure the reliability of cooling system. Using the special peripheral accessories recommended by Cummins, ensure the normal use and maintenance of the engine.Transmission System
ZF micro controller with 3 stage power-shiftis to make sure the high reliability. Using the most advanced TCU microelectronic control transmission proportional control valve to achieve uninterrupted power output and automatic transmission, no need the driver manual shift operation. Fault display and convenient diagnostic socket, greatly simplifying maintenance and repairs. German Kessler heavy load drive axle, with two stage speed adjust, multi-disc wet service brake system, is fully enclosed system with maintenance free.Hydraulic System
International famous brand hydraulic valve,the main hydraulic pump, the guide handle.Load sensing hydraulic system, reduce the continuous load of engine ; Remote hydraulic control and electric control are simple and convenient. Multiple hydraulic testing points simplify the maintenance work.Brake System
Poclain hydraulic power brake, wet multi-disc service braking and spring action, caliper disc parking brake system with forced cooling by oil, is safe and reliable.Steering System
Single transverse arranged cylinder of steering axle has dual function, full hydraulic power steering, steering has priority, with load sensing function, for easy operation.
38-48t Internal Combustion Counterbalanced Forklift Truck
- 38,000~48,000kg Load Capacity
- 0~7000mm Lift Height
- Diesel Drive Types
Features
DANA TE30 new type gear box, CUMMINS QSM11 3A emission engine and KESSLER D102 heavy-load driving axle are utilized. The key parts are internationally well-known brand products of which the quality is stable and durable.
Equipped with seat operating presence sensing (OPS) system to improve safety; The controller area network (CAN) bus LCD display is applicable, which has the function of built-in weight display, fault diagnosis and chinese-english display query system.
With integrated and multi-functional operating handle and electro-hydraulic proportional control, easy to lift, tilt and operate. With LUDV main control multiple-way valve, it can realize fast response, precise operation and achieve fine repeatability.
Equipped with FIMS cloud intelligent forklift truck management system, remote intelligent monitoring, better promote equipment management and logistics management.
X Series Empty Container Handler 9.0t
- 9,000kg Load Capacity
- 0~21700mm Lift Height
- Diesel Drive Types
A new generation high-quality professional product, which is newly developed on the basis of Hangcha’s X series platforms and years of industry experience and extensively adopts advanced technologies, is mainly used in the loading, handling and stacking operations of empty 20ft and 40ft ISO containers.
Reliable
The mast is made of high-strength steel and has an ultra-wide structure designed. The installation point of the inclined oil cylinder is arranged at a high position to improve the rigidity and stability of the truck. The truck’s heat dissipation management system automatically adjusts the heat dissipation intensity, so that each system can quickly enter the efficient operating state. The large heat dissipation capacity design ensures the requirements for the heat dissipation in high temperature environments to be met.
Comfortable
The new generation electronically-controlled gearbox enables flexible, smooth and comfortable gear shifting.
Effcient
The throttle following control provided for controlling the engine speed, the single-hand joystick and the electric proportional control enable flexible, accurate and efficient control.
X Series Reachstacker 45t
- 45,000kg Load Capacity
- 0~15200mm Lift Height
- Diesel Drive Types
The RS4531CH-XRW86 Reachstacker is a newly developed product based on Hangcha’s X series platforms. Inheriting the appearance of the X series family, it is fashionable, high-end and powerful. Using key parts of internationally renowned brands, it has excellent performance and guaranteed quality. Using advanced control technologies, it is safe, reliable, comfortable and efficient. It is mainly used in the loading, handling and stacking operations of 20’ and 40’ ISO heavy containers and meets the requirements for high-intensity and long-term operations of containers at ports, docks, railway and highway transfer stations, storage yards, etc.Safety
Safety technologies such as seat sensing, dynamic anti tipping protection, longitudinal dual anti-tipping protection, spreader twist-lock dual protection, startup anti-stalling protection, fault protection, etc. are used to ensure safe operations at all times.Maintenance
The easy-to-remove hood is designed. All the maintenance points are in easily accessible and safe positions and the electric control cabinet wiring method is adopted, which greatly simplifies the maintenance and repair and improves the maintenance efficiency.Efficient
Electric proportional control, throttle following control, vertical lift control, intelligent cooling fan control and torque control enable efficient and flexible control.Strong power system
With high performance and low fuel consumption, the low-speed high-torque VOLVO TAD1151VE engine has advanced fault diagnosis and fault protection functions. With a displacement of 10.8L, six in-line cylinders and low emission, it is turbocharged and meets EPA3, EUⅢA and China Stage III emission requirements.ELME new-generation container spreader
For the new-generation ELME817 series telescopic container spreader, the design of the telescopic beam, turntable, etc. are optimized, so that the structural strength is increased, the weight of the spreader is 16% less than that of the spreader of the last generation and the service life is prolonged by 30%. The arrangement of the oil cylinder is changed.Vehicle cooling management
Fans with electronic motors are used independently to cool hydraulic oil and brake oil, so that the requirements for use in the 50-degree high temperature environment are met. Torque converter oil temperature control management ensures that the gearbox works within the optimal temperature range.Appearance
The pitch-down streamlined design of the vehicle presents a vivid and sturdy profile. The optimized counterweight contour greatly reduces the turning radius of the vehicle, broadens the side rear and front rear views, and makes driving simple and safe.
X Series Empty Container Handler 6.0-7.0t
- 6,000~7,000kg Load Capacity
- 0~12607mm Lift Height
- Diesel Drive Types
Appearance
Safety technologies such as seat sensing, dynamic anti tipping protection, longitudinal dual anti-tipping protection, spreader twist-lock dual protection, startup anti-stalling protection, fault protection, etc. are used to ensure safe operations at all times.Comfort
Professional exterior industrial design, high-end product with high identification, compact and smooth style showing modern industrial aesthetics. Hidden arrangement. The exposed part allows more clean and neat appearance.Intelligent
The central controller of the forklift uses CAN bus architecture to monitor the built-in diagnostic sensors, manage the functions of the forklift and raise central fault alarm of the forklift. /Optional intelligent management system can be selected to make remote intelligent monitoring manage devices more easily.Maintainability
The whole vehicle is equipped with a tiltable cab, a wide-opened hood, mast centralized lubrication and fault diagnosis display function, which is very convenient for maintenance.Fully-suspended All-round Vision Cab
The new fully-suspended all-round vision cab (HPC) and optimized vehicle outline enable all-round sight and view. Performance of the air conditioner is improved to enable uniform conditioned air blowing from the air outlet and a strong cooling effect.Reliable
The new fully-suspended all-round vision cab (HPC) and optimized vehicle outline enable all-round sight and view. Performance of the air conditioner is improved to enable uniform conditioned air blowing from the air outlet and a strong cooling effect.
PALLET TRUCKS
A Series Mini Range Pallet Truck II
- 1,500kg Load Capacity
- 0~120mm Lift Height
- Lead Acid Battery Drive Types
The A series pallet truck mini range Ⅱ has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, the A series pallet truck mini range Ⅱ has the strength and durability to minimise your total cost of ownership.
Appearance
A series pallet truck mini range Ⅱ applied professional industrial design, stream lines, and compact, and fully ergonomic consideration, in line with the latest design trends. Applied steel stamping and injection molding processes, which is robust, durable, and also environmental compliance.
Comfort
Simple and beautiful tiller made by REMA designed to make the operator feel comfortable, all the operation can be completed by one hand. Optimized designing structure to offer a good visibility and easy entrance of the pallet.
Safety
Three braking system of regenerative braking, reverse current braking, parking brake, insures the safe operation. Anti-slope on gradient can keep the safety.
Reliability
5-pivot design provide longer working life. Imported waterproof connectors, all wires and cables are protected, greatly improve the reliability of the electric system.
Maintenance
Built-in charger and maintenance free gel battery, you don’t need to worry about them. Integrated battery indicator, hour meter and self-diagnostic instrument.
A Series Mini Range Pallet Truck III
- 1,500kg Load Capacity
- 0~120mm Lift Height
- Lead Acid Battery Drive Types
The A series pallet truck mini range III has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, the A series pallet truck mini range III has the strength and durability to minimise your total cost of ownership.
Comfort
Make the operator feel comfortable, all the operation can be completed by one hand. Optimized designing structure to offer a good visibility and easy entrance of the pallet.
Reliability
5-pivot design provide longer working life. Imported waterproof connectors, all wires and cables are protected, greatly improve the reliability of the electric system.
Safety
Three braking system of regenerative braking, reverse current braking, parking brake, insures the safe operation. Anti-slope on gradient can keep the safety.
High Performance
Rated capacity 1500kg, meet the needs of the majority of customers. Powered by traction motor not only has good acceleration and perfect performance, but also low heat.
A Series Mini Pallet Truck
- 2,000kg Load Capacity
- 0~120mm Lift Height
- Lead Acid Battery Drive Types
The A Series 2.0t Mini Pallet Truck is a new product developed by Hangcha for warehouse and logistics applications. With the state-of-the-art permanent magnet brushless drive technology, and the 48V system, features advanced performance, comfortable operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouses, supermarkets, workshops and homes.Appearance
The A Series Pallet Truck is completed with specialized industrial design of appearance. The entire truck features smooth lines and affluent sense of movement, and compact profile, with full consideration being given to ergonomics, in accord with the latest appearance design trend.Reliability
The three-point support design is applied, and side support system and elastic auxiliary wheels are provided to guarantee safety and reliability. With optimized design, the lifting rod is steady and reliable, bearing small force.Safety
Release braking, reverse braking, and three types of emergency braking can ensure safety of traveling; Anti-sliding function on slope can ensure safety of operation.High Performance
It is equipped with permanent magnet brushless drive motor, with excellent performance, and a new 48V power supply system, with extremely low heat generation.Comfort
The REMA tiller of latest development is simple but reliable and beautiful, and all operations can be done easily with one hand.
A Series Basic Range Pallet Truck
- 2,000kg Load Capacity
- 0~125mm Lift Height
- Lead Acid Battery Drive Types
Safety
With three braking types: releasing brake, reversing brake and emergency brake, the driving safety has been ensured. The applied slope anti-slip function ensures the safety of the operation.Comfort
The shock absorption design of foldable platform improves comfort greatly to the operator. Simple and beautiful tiller designed to operate all functions easily even by one hand.High performance
The applied CANBUS structure to more reliable and faster command access. Regenerative brake and slope anti-slide function are offered by this truck.Reliability
Water-proof plugs and connectors applied to provide a reliable protection to electric system. The adopted unique floating suspension system ensures good driving wheels’ grip and excellent stability.
A Series Pallet Truck With High Lift 2.0t
- 2,000kg Load Capacity
- 0~550mm Lift Height
- Lead Acid Battery Drive Types
The A series pallet with high lift is a pedestrian pallet truck which can also be used for order picking and light stacking operations. In addition to the support arm lift the load can be raised to an overall height of 675 mm via a simplex mast contained in the battery compartment. This height adjustment is really appreciated when order picking, restocking shelves in retail stores or assembly line activities in manufacturing industries.Stability
Integrated mast matched to chassis width. High resistance fork carriage and load arms made of robust pressed steel.Comfort
All commands integrated to the tiller, the function buttons can be operated in comfortable way. For safe use in confined areas, tiller operates in vertical position via crawl speed button.Safety
The truck has the lowering intelligent protection function. When the forks are less than 150mm away from the ground, the side lowering button is ineffective. With the emergency reverse button at the head of the handle, when the truck runs back and there is emergency, it can effectively prevent the driver from injury.Reliability
With five-supporting-point and low gravity center design, a rugged construction makes the pallet truck that can be relied on. With the non-contact proximity switch, such switch has long service life and can operate reliably.
A Series Hi Range Pallet Truck
- 2,000-3,000kg Load Capacity
- 0~125mm Lift Height
- Lead Acid Battery Drive Types
Safety
With three braking types: releasing brake, reversing brake and emergency brake, the driving safety has been ensured. The applied slope anti-slip function ensures the safety of the operation.
Comfort
The compact body and big rounded design provide an ideal operation in limited space, and the wedge designed chassis greatly increases the passing ability.
High performance
Regenerative brake and slope anti-slide function are offered by this truck. Stand-on type with high power drive motor, provides fast travel speed and good gradeability.
Reliability
Water-proof plugs and connectors applied to provide a reliable protection to electric system. The adopted unique floating suspension system ensures good driving wheels grip and excellent.
A Series Rider Pallet Truck
- 2,000-3,000kg Load Capacity
- 0~125mm Lift Height
- Lead Acid Battery Drive Types
The rider pallet truck is one of the A series pallet truck models. Using the latest AC drive technology, advanced performance, comfort, safe, reliable, low maintenance cost, is the ideal tool for heavy duty and long distance transport operations.
Appearance
Applied steel stamping and injection molding processes for front and back guard, which is robust, durable, and also environmental compliance.
Comfort
The compact body and semicircular design provide an ideal operation in limited space, and the wedge designed chassis greatly increases the passing ability.
High performance
Powered by AC traction motor not only has good acceleration and climbing performance, but also low heat, brushless, maintenance-free.
Reliability
Top quality hydraulic power unit applied to provide low noise, low vibration, smooth lifting and landing reliable operation. Punch formed forks to provide more strength and tip guide to provide higher efficient operation.
Maintenance
AC motor without carbon brushes, maintenance-free, cost saving.
T Series Pallet Truck
- 2,000kg Load Capacity
- 0~130mm Lift Height
- Lead Acid Battery Drive Types
Durability
Durable frame construction, with integrated welded forks brings the truck high rigidity, and long working life.Productivity
Compacted chassis design, makes the truck operated in limited spacious. Powerful AC traction motor with Curtis control system. Applied MOSEFET high frequency control.Ergonomics
Tiller is ergonomically designed for Max. driver’s comfort. Dual lift/lower button controls allow operation by either hand. Creep speed control button is available. Conductor belt is standard specification.Serviceability
Battery discharge indicator with lifting interrupt as standard specification when 20% battery capacity available and inform the operator of recharge requirement. IP54 environment sealing, which protect the inside components. Open the back cover, every components are easy to reach.
Hand Pallet Truck SBA25
- 2,500~3,500kg Load Capacity
- 0~200mm Lift Height
- Lead Acid Battery Drive Types
SBA Heavy Duty Hand Pallet Truck
- 2,500-3,500kg Load Capacity
- 0~200mm Lift Height
- Lead Acid Battery Drive Types
Smart Hand Pallet Truck
- 2,000kg Load Capacity
- 0~190mm Lift Height
- Lead Acid Battery Drive Types
SBA-L Low Profile
- 1,500~2,000kg Load Capacity
- 0~150mm Lift Height
- Lead Acid Battery Drive Types
Scale Pallet Truck
- 2,000kg Load Capacity
- / Lift Height
- Lead Acid Battery Drive Types
SBJ Reel Pallet Truck
- 2,000kg Load Capacity
- 0~2000mm Lift Height
- Lead Acid Battery Drive Types
SPA Lift Table
- 150~1,500kg Load Capacity
- 0~620mm Lift Height
- Lead Acid Battery Drive Types
SPS Lift Table
- 150~800kg Load Capacity
- 0~620mm Lift Height
- Lead Acid Battery Drive Types
HLT1C High Lift Scissor Truck
- 1,000kg Load Capacity
- / Lift Height
- Lead Acid Battery Drive Types
PALLET STACKERS
A series Basic range pallet stacker
- 1,200~1,600kg Load Capacity
- 0~4500mm Lift Height
- Lead Acid Battery Drive Types
Safety
With three braking types: releasing brake, reversing brake and emergency brake, the driving safety has been ensured. The applied slope anti-slip function ensures the safety of the operation.
Comfort
The shock absorption design of foldable platform improves comfort greatly to the operator. The new designed floating suspension system made steering operation more flexible and convenient.
Reliability
Five-pivot with low centre of gravity design and high strength steel frame structure chassis provide larger residual load capability and longer working life.
High Performance
AC travelling motor applied to provide excellent acceleration, good gradeability, low heat, no carbon brush and maintenance free.
A series High Range Pedestrian Pallet Stacker With Initial Lift
- 1200~1600kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
The A series pedestrian stacker is a new product developed for warehouse and logistics applications. With the latest AC control technology, it features excellent performance, easy operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouse, supermarket, and workshop.The lithium battery forklift is equipped with the c-series forklift special lithium battery cell and module jointly developed by HANGCHA and CATL, standard power distribution heating function.
Appearance
The A series pedestrian stacker adopts a professional industrial design of exterior. The vehicle has a smooth vivid profile and a fully ergonomic design, following the latest exterior design trend. With a large number of steel plate stamping and injection molding processes to enable a robust and durable product that meets environmental protection requirements.
High performance With AC walking motor, it has excellent acceleration performance, good climbing performance, low heat generation, no carbon brush and is maintenance-free. With the new AC control system to perform accurate, stable, and more efficient control. The CANBUS structure makes the whole vehicle communication faster and more reliable.
Reliability
With the four-point low center of gravity design and a high-strength steel frame structure, the vehicle frame has a large residual load capacity and a long service life. All plug connectors are imported and waterproof, and all cables have reliable protection, which increases reliability of electrical system significantly.
Maintenance
The brushless, maintenance-free AC driving motor reduces operation cost significantly. The meter integrating battery indicator, timer, and fault self-diagnosis is convenient for maintenance. Rear cover can be completely opened, maintenance is very convenient.
Comfort
With the unique function of driving at a turtle speed with an indicator light, the vehicle can be more easily driven at a slow speed while carrying out operations in a very narrow space. The optimized body structure enables the vehicle to have an excellent operating view and to access the pallet easily.
A series Mini range pallet stacker
- 1,000~1,200kg Load Capacity
- 0~2000mm Lift Height
- Lead Acid Battery Drive Types
Safety
With three braking types: releasing brake, reversing brake and emergency brake, the driving safety has been ensured. The applied slope anti-slip function ensures the safety of the operation.
Comfort
Simple and beautiful tiller designed to operate all functions easily even by one hand.
Reliability
CDD: The adopted four-pivot design to provide reasonable driving wheel balance and good visibility and reliability. The applied lifting system with optimized design is more stable and reliable.
High Performance
Strong power to satisfy most applications of material handling.
A series mini range pallet stacker (double column)
- 1,000~1,200kg Load Capacity
- 0~3600mm Lift Height
- Lead Acid Battery Drive Types
The A series mini range pallet stacker (double column) has been engineered to be both powerful and flexible to meet the requirements of many demanding applications. Whether it’s supermarket work, delivery service, stock replenishment or heavy manufacturing, it has the strength and durability to minimise your total cost of ownership.
Appearance
A series mini range pallet stacker (double column) applied professional industrial design, stream lines, and compact, and fully ergonomic consideration, in line with the latest design trends.
Comfort
Built-in charger and maintenance free gel battery adopted to provide convenient usage. The compact body and semicircular design provide an ideal operation in limited space.
Safety
Three braking system of regenerative braking, reverse current braking, parking brake, insures the safe operation. Anti-slope on gradient can keep the safety.
Maintenance
All shafts installed lubricated shaft sleeve and oil cup, provide convenient maintenance and long service life. Dismantle the additional wheel don’t need to lift the truck.
A series Hi range pallet stacker
- 1,200~2,000kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
Comfort
The shock absorption design of foldable platform improves comfort greatly to the operator. The new designed floating suspension driving system, adjustable automatically with loads, offers the driving wheels sufficient power.
Safety
With three braking types: releasing brake, reversing brake and emergency brake, the driving safety has been ensured. The applied slope anti-slip function ensures the safety of the operation.
Maintenance
AC motor with no cabin brush, don't need maintenance, lower cost. Rear cover can be completely open, operator can see all the components, so the maintenance is very convenient.
High Performance
AC travelling motor applied to provide excellent acceleration, good gradeability, low heat, no carbon brush and maintenance free. The latest CURTIS AC control system provides accurate and stable control to work more efficient.
A Series Double-column Pallet Stackers Mini Range II
- 1,200~1,500kg Load Capacity
- 0~3600mm Lift Height
- Lead Acid Battery Drive Types
The A series 1.2t/1.5t mini stackers is a new generation of products designed by Hangcha for warehousing and logistics applications. Using the latest permanent magnet drive technology and with advanced performance, comfortable, safe and reliable operations and low costs, the products are ideal tools for loading, unloading and handling palletized goods in warehouses, supermarkets, workshops and homes.
Appearance
The new generation of A series double-column pallet stackers mini range II adopts a professional industrial exterior design. The vehicle has a smooth vivid profile, a compact shape and a fully ergonomic design, and follows the latest exterior design trend.
Comfort
The optimized design of the body structure provides an excellent operating view and to get in/out the pallet more easily.
Safety
The emergency reverse button on the top of the tiller can effectively prevent the driver from being injured in an emergency occurring.
High Performance
With a permanen t magnet brush/synchronous motor with excellent performance and low heat generation. The truck with regenerative braking provides protection for preventing sliding down a ramp.
Maintenance
With a rear hood that can be completely opened to expose all components and facilitate the maintenance of the truck.
A Series Mini Range Pallet Stacker With Initial Lift 1.0-1.2t
- 1,000~1,200kg Load Capacity
- 0~3600mm Lift Height
- Lead Acid Battery Drive Types
The A series mini range pallet stacker with initial lift is a new product developed by Hangcha for warehousing and logistics applications. It has a compact body, and can be operated easily and is suitable for operation in narrow aisles. It can carry out double pallet handling through leg lifting and is ideal for loading in warehouses, supermarkets, and workshops.
Appearance
The A series mini range pallet stacker with initial lift adopts a professional industrial design of appearance.
Comfort
The compact body and semicircular design provide an ideal operation in limited space, and the ability of walking upright greatly increases the convenience in the container.
Safety
Three braking system of regenerative braking, reverse current braking, parking brake, insures the safe operation.
Reliability
With a high-strength steel frame structure, the vehicle frame has a large residual load capacity and a long service life. 4-pivot design provide longer working life.
A series electric counterbalanced stacker
- 800~2,000kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
Is widely used in pallet stacking, wherever support arm stacker truck cannot operate close pallet and lower pallet. Applied the latest AC drive technology, advanced performance, comfort, safe, reliable, low maintenance cost, easy to operate, and economical to buy is the ideal solution for warehouses, supermarkets, workshop loading/unloading and handling pallets of cargos.
Appearance
A series electric counterbalanced stacker applied professional industrial design, stream lines, and compact, and fully ergonomic consideration, in line with the latest design trends.
Comfort
The compact body and semicircular design provide an ideal operation in limited space, and the wedge designed chassis greatly increases the passing ability.
Reliability
The REMA tiller made in Germany of latest development is simple but beautiful, and all operations can be done easily with one hand.
Maintenance
AC motor without carbon brushes, maintenance-free, cost saving. Integrated battery indicator, hour meter and self-diagnostic instrument.
A series high range stand-on pallet stacker with initial lift
- 1,000~1,600kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
The A Series Pallet Stacker Truck is a new product developed for warehouse and logistics applications. With the latest AC control technology, it features excellent performance, easy operation, safety and reliability, and low maintenance cost, and is an ideal vehicle for loading, unloading, and handling palletized goods in warehouse, supermarket, and workshop. The A series pallet stacker with initial lift offers better reachability with its lifting arms.
Appearance
The A series pallet stacker with initial lift is completed with specialized industrial design of appearance. The entire truck features smooth lines and auent sense of movement, with full consideration being given to ergonomics, in accord with the latest appearance design trend.
Comfort
The lower vibrational pedal offers much higher driving comfort, and reduces fatigue of long-duration operation. The REMA tiller made in Germany is simple but beautiful, and all operations can be done easily with one hand.
Reliability
Four-pivots and low-gravity-center design and the high-strength steel plate framed structure feature large residual load capacity, and long service life. All plug connectors are imported and waterproof, and all cables have reliable protection, which increases reliability of electrical system significantly.
Maintenance
Traveling speed will be automatically reduced after fork lifting 500mm. Turning speed is automatically reduced when steering.
A series high range stand-on pallet stacker with reach fork
- 1,200~1,600kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
The A series pallet stacker with reach fork moves goods forward and backward with a scissor fork extension system. It acts as a counterbalanced stacker when its fork is extended, which can handle non-standard pallets, enclosed pallets, and enclosed shelves easily; and acts as a straddle stacker when its fork is retracted, which can operate flexibly in narrow passage.Appearance
All plug connectors are imported and waterproof, and all cables have reliable protection, which increases reliability of electrical system significantly.Comfort
The standard configuration of tortoise speed driving function allows the truck to move at slow speed more easily.Safety
The soft landing system reduces lowering speed automatically when height from ground to fork is less than 100mm, which provides effective protection for goods.High Performance
The AC driving motor features excellent acceleration performance, outstanding climbing ability, low heat emission, and is brushless, and maintenance-free.Maintenance
Back cover can be opened fully, and all components and parts are clear at a glance, which is very convenient for maintenance of the entire machine.
A series high range stand-on pallet stacker with mast move
- 1,200~2,000kg Load Capacity
- 0~5500mm Lift Height
- Lead Acid Battery Drive Types
The truck combines benefits of regular stacker and counterbalanced stacker. It can be used for non-standard pallets, enclosed pallets, and enclose shelves. The mast can be retracted into truck body, which reduces passage width required for operation significantly, and the stacker is an ideal vehicle for operation in narrow passage. Cutting-edge AC control technology applied for the truck offers excellent performance, comfortable operation, safety and reliability, and low maintenance cost.
Reliability
Three-pivots and low-gravity-center design and the high-strength steel plate framed structure feature large residual load capacity, and long service life.
Safety
The soft landing system reduces lowering speed automatically when height from ground to fork is less than 100mm, which provides effective protection for goods.
Maintenance
Back cover can be opened fully, and all components and parts are clear at a glance, which is very convenient for maintenance of the entire machine.
High Performance
The AC driving motor features excellent acceleration performance, outstanding climbing ability, low heat emission, and is brushless, and maintenance-free.
Comfort
Optimized mast structure design offers excellent field of view for operations, which is easy for access and exit pallet.
VERY NARROW AISLE TRUCKS
A Series Man-down Turret Truck 1.2t
- 1200kg Load Capacity
- 0~10000mm Lift Height
- Lead Acid Battery Drive Types
A series Man-down Turret Truck is applicable for use in warehouses that need to be upgraded or have limited storage space. The attachment can rotate 180 degrees and can stack goods left and right from the aisle. This greatly improves the space utilization rate. The ergonomically-designed comfortable vehicle has a wide operating vision and a stable control system and is further optimized and improved in terms of configuration, parameter, performance, safety, cost, etc.
Appearance
Streamlined surface modelling, smooth profile outlines, attractive and agreeable.Stability
Wide body structure design allows the stacker to have good stability. Frame and mast made of high-strength framework structure and low center of gravity enable good stability.Maximum Efficiency
The narrow aisles required for operations and the fork lift height up to 470.4 inch maximize the space availability of your warehouses. The high lift mast boasts high load capacity and improved stacking efficiency.Advancement
Electromagnetic brake is used to realize intelligent braking allows for more efficient and safer braking. With the advanced electro-hydraulic control system, the traveling speed is automatically associated with the lifting height and turning angle; The load weight is automatically associated with the lifting height; Thus the fork position is intelligently identified and the traveling speed is controlled.Reliability and Safety
The low center of gravity at three pivots and the high strength of the main force-bearing components such as frame and mast are designed to meet heavy-duty operating conditions. The main electrical components such as the motor controller, contactor, power plug and emergency cut-off switch are all products of well-known brands.
Turret Stockpicker
- 1,361~1,588kg Load Capacity
- 0~10220mm Lift Height
- Lead Acid Battery Drive Types
The 3,000-3,500lbs man-up tri-lateral stacker for narrow aisles and high bay warehouses can meet the needs of customers for operations in narrow aisles and high stacking heights. Featuring a high lift, high load capacity and small turning radius, as well as advanced performance, easy operations, high safety and reliability, etc., it is an ideal solution for handling and stacking long materials indoors.
Appearance
Streamlined surface modelling, smooth profile outlines, attractive and agreeable.Stability
Wide body structure design allows the stacker to have good stability. Frame and mast made of high-strength framework structure and low center of gravity enable good stability.Maximum Efficiency
The narrow aisles required for operations and the fork lift height up to 470.4 inch maximize the space availability of your warehouses. The high lift mast boasts high load capacity and improved stacking efficiency.Advancement
Electromagnetic brake is used to realize intelligent braking allows for more efficient and safer braking. With the advanced electro-hydraulic control system, the traveling speed is automatically associated with the lifting height and turning angle.Reliability and Safety
The low center of gravity at three pivots and the high strength of the main force-bearing components such as frame and mast are designed to meet heavy-duty operating conditions.
ROUGH TERRAIN TRUCKS
XH series high-voltage Telehandler
- Load Capcity: 2,500~3,500kg
- Lift Height: 0~9800mm
- Drive Types: Li-Ion
HANGCHA Family-Design exterior, ergonomic cab, intuitive HMI system and premium driving comfort experience.
X series diesel telehandler
- Load Capcity: 4,000kg
- Lift Height: 0~17700mm
- Drive Types: Diesel
HANGCHA Family-Design exterior, ergonomic cab, intuitive HMI system and premium driving comfort experience.
2.5-3.5t Two-Wheel Drive Rough Terrain Forklift Truck
- 2,500~3,500kg Load Capacity
- 0~6000mm Lift Height
- Diesel Drive Types
Hangcha 2.5~3.5t rough terrain forklifts is a tough, compact forklift with a two-wheel drive system. It is based on XF series IC forklift truck. It is world renowned for superior performance, economy and longevity.
Reliability
Suspension hydraulic transmission with two forward gears and one reverse, providing higher speed and greater gradeability; Drive axle is equipped with wide-base and deep tread tires, enhanced brakes, bearings, differential with automatic locking function, as well as enhanced steering axle assembly providing ultimate traction during inclement weather conditions and rough operating surfaces.
Comfortable
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied. Comfortable also contribute to increased productivity and reduced the noise.
Maintenance
The cover on the Panel can be lifted up simply to check the brake fluid.
Productivity
The new Dynamic load sensing hydraulic steering system contributes to reduce loss of hydraulic and improve energy efficiency.
2.5-3.5t Four-Wheel Drive Rough Terrain Forklift Truck
- 2,500~3,500kg Load Capacity
- 0~6000mm Lift Height
- Diesel Drive Types
The multipurpose concept refers to the capability of the forklift truck to work in many different areas, with a great performance no matter how hard the conditions are. We studied all the specifications of the best forklifts in the world, specialized in industrial and rough terrain types, determining the characteristics that makes a forklift work well in an industrial environment. After that, we combined such information, to prepare the basis of the design of our product.Reliability
The full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability;
Comfortable
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied.
Maintenance
Adoption of new generation integrated electric box makes maintenance and repair convenient, layout becomes more reasonable and with better water-proof performance.
High Performance
The distance to ground is 270mm for 3.0t, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.
5.0t Four-Wheel Drive Rough Terrain Forklift Truck
- 5,000kg Load Capcity
- 0~6000mm Lift Height
- Diesel Dirve Types
HANGCHA 5t rough terrain forklift with 2WD/4WD was developed on the basis of the XF series of Hangcha. It adopts the Deutz and Cummins engine, which is powerful and reliable, easy to maintain; It can adapt to the rugged roads in the stone market, timber market, construction sites, etc., as well as the wet and slippery roads in rain and snow.
Safety
Thanks to the steering oil circuit and the brake oil circuit are independent of each other, thereby reducing the interference of the brake on the steering, the hydraulic braking system is very safe.
Comfort
With the suspension and integrated overhead guard, full-floating transmission, complex engine shock absorber and suspension seat, driving is more comfortable, and the vibration and noise of the truck can be reduced.
Reliability
The reinforced truck chassis with CAE simulation software, optimized design is conducted for the tilt cylinder and steering drive axle installation.
Maintenance
The two-piece design makes the floorboard easy to lift and remove for access to the power train.
Productivity
The transmission system gets the maximum performance from the engine without reaching high revolutions, which provides fuel saving, noise level reduction and engine life increase.
1.5-1.8t Four-Wheel Drive Rough Terrain Forklift Truck
- 1,500~1,8000kg Load Capacity
- 0~6000mm Lift Height
- Diesel Drive Types
The multipurpose concept refers to the capability of the forklift truck to work in many different areas, with a great performance no matter how hard the conditions are. We studied all the specifications of the best forklifts in the world, specialized in industrial and rough terrain types, determining the characteristics that makes a forklift work well in an industrial environment. After that, we combined such information, to prepare the basis of the design of our product.
Introduction
Hangcha 1.5~1.8t 2WD/4WD rough terrain forklifts is a tough, compact forklift. It is world renowned for superior performance, economy and longevity.Comfortable
In developing the rough terrain forklift, comfort and easy operation is always considered, for example, improved vibrating levels, compound engine damper and full floating seat and cabin are all applied. Comfortable also contribute to increased productivity and reduced the noise.Maneuverability
The distance to ground is 280mm, it offers greater maneuverability and keep the truck moving in the roughest of applications, and yet we keep a very low center of gravity, by using a distributed weight in the forklift, giving it an excellent stability.Reliability
The full-floating hydraulic transmission gearbox, with 2WD and 4WD switch function, can provide higher running speed and stronger gradeability.
High-voltage Lithium Battery Rough Terrain Forklift
- The 2.5-3.5t high-voltage lithium battery rough terrain forklifts are independently-developed new series lithium battery rough terrain products that combine the advantages of XH series dedicated heavy-duty high-voltage lithium battery forklifts and rough terrain internal combustion forklifts. Representing a breakthrough over the traditional design and a new generation of rough terrain forklifts, the forklift of this series is equipped with pioneered front and rear dual-motor forklift high-voltage drive systems and a new energy vehicle high-voltage platform to offer both performance of rough terrain forklift and comfort of electric forklift.
EXPLOSION PROOF FORKLIFT
Explosion Proof Forklift
- 1,000~3,500kg Load Capacity
- 0~6500mm Lift Height
- Lead Acid Battery Drive Types
We are the first forklift manufacturer to use National Explosion proof standard for gas and dust area. Our Explosion proof degree has reached the Exdem(ib)mbs II BT4 Gb/Ex tD(ibD)mbD A21 IP65 T130°C and can be used in the gas environment of Zone1 & Zone2 and dust environment of Zone 21 & Zone 22 separately or coexist.
Introduction
Use multi-Explosion proof measurements, making forklift more safe and stable and operation more convenient. Add separate intelligent self-control system, supervising and protecting on alternate temperature, brake temperature and forklift insulation. The traction motor, pump motor and controller all use alternating variable frequency technology to make higher efficiency and better controlling. No use of contact or carbon brush to make easier repair work.
AGVs
-
Hangcha has 60 years of R&D experiences in traditional vehicle equipment and built up it’s production capacity. Hangcha has the support of the high-end technology innovation systems consisting of the academician institutes, key enterprise institutes at provincial level specializing in intelligent vehicle for industrial use, and post-doctoral programs etc. By incorporating the cutting-edge AGV automation technologies from Kollmorgen ( NDC8 system), developing and innovating twice on this basis, Hangcha strives to become world leading provider of turn-key solutions in intelligent logistics encompassing the planning & design of logistics, systems integration, vehicle manufacturing, marketing & engineering services, to deliver internationally competitive products & solutions based on smart logistics driven technologies in the market.
Hangcha AGV's Operating at BMW Brilliance Manufacturing Facility
Hangcha Group worked with BMW Brilliance to deploy Hangcha’s first AGV system at BMW Brilliance’s automotive manufacturing facility.Hangcha AGV's Operating at CHAOYANG Tire's Manufacturing Facility
CHAOYANG Tire successfully integrated Hangcha Group’s AGV based intelligent logistic system into their manufacturing facility. They were able to use 11 AGV’s to replace 20 manned pieces of material handling equipment and increase their productivity.Hangcha AGV's Operating at Ningbo Blue Dragon Logistics Warehouse
Ningbo Blue Dragon Logistics, an oceanic shipping warehouse service, uses Automated Guide Reach Trucks and Stackers to automate their warehouse and increase productivity.Hangcha AGV's Operating at Seraphim Solar System's Facility
Seraphim Solar System partnered with Hagcha Group and Kollmorgen to make their warehouse fully automated. They used Hangcha Group’s Narrow Aisle High Reach AGV’s to increase their production to 24 hours a day. This lead to a 20% increase in their productivity.
