• Online Exhibitions
Navigation : EXPO21XX News

Latest News

Lenze exhibited its latest software, hardware digital solutions at SPS 2021

New business models: resilient, resource-efficient manufacturing: and less downtime thanks to the transparency of relevant data – these challenges facing mechanical engineers and their customers are increasing. At SPS 2021 in Nuremberg, […]

ZEISS’s CALYPSO 2021 saves time and effort in performing workpiece analysis

On May 28, 2021, users receive access to the latest version of ZEISS’s all-purpose measurement software with focus on standard geometries. ZEISS CALYPSO 2021 reduces the time and effort needed to analyze […]

FAULHABER releases its new MC3001 motion controllers available in two variants

With the new MC3001 motion controllers, available as MC 3001 B (board-to-board connectors) or MC3001P (28-pin plug connector), FAULHABER completes the MC V3.0 generation of controllers for smaller motor series. The controllers […]

ADLINK becomes a Community Member in O-RAN ALLIANCE to boost 5G Open RAN commercialization

ADLINK becomes a Community Member in O-RAN ALLIANCE to boost 5G Open RAN commercialization

ADLINK Technology Inc., a global leader in edge computing, joins the O-RAN ALLIANCE as a Community Member to actively contribute to the ALLIANCE mission to bring intelligent, open, virtualized and fully interoperable […]

Kontron introduces its new SMARC module fA3399 with Arm® processor Rockchip RK3399K

Kontron introduces its new SMARC module fA3399 with Arm® processor Rockchip RK3399K

Kontron, a leading global provider of IoT/Embedded Computing Technology (ECT), launches the new SMARC module fA3399 with Arm® processor Rockchip RK3399K. In the benchmark of Arm®-based modules, the new Kontron module has […]

SICK adapts its product development process based on the industry’s digital transformation

SICK adapts its product development process based on the industry’s digital transformation

New fields of application, new sensor solutions: The digital transformation of industry presents new challenges every day. In the development of concept sensors, customers and partners are involved right from the start […]

STADLER designs and builds new G.A.I.A. and IREN sorting plants in Asti and Parma

STADLER designs and builds new G.A.I.A. and IREN sorting plants in Asti and Parma

As the 2030 Agenda targets loom, environmental service companies are increasingly incorporating in their business plans investments in recycling facilities capable of bringing us closer to the zero waste goal by turning […]

Blue Tech Environnement Becomes Eggersmann GmbH’s new Dealer

Blue Tech Environnement Becomes Eggersmann GmbH’s new Dealer

Eggersmann GmbH chose Blue Tech Environnement to sell its products on the French market. The young company has been acting as a representative of Eggersmann GmbH since October 1, 2021 with the aim […]

Haas: A heroic story of a used TYRON in Sweden

Haas: A heroic story of a used TYRON in Sweden

Ted Augustsson is our reliable sales partner for Sweden since many years.We have already realised numerous projects together and provided long-term support. A few days ago, another project was added. Uddevalla entreprenad […]

LASER COMPONENTS now offers KYOCERA SLD Laser’s newly extended white light sources

LASER COMPONENTS now offers KYOCERA SLD Laser’s newly extended white light sources

KYOCERA SLD Laser, Inc. has further expanded its range of high-lumen white light sources. To make them more attractive for use in industrial applications, the manufacturer has increased the lifetime of its […]

SCHOTT D263® T eco Windows are now available from Edmund Optics®

SCHOTT D263® T eco Windows are now available from Edmund Optics®

Edmund Optics®, leading global manufacturer and supplier of optical components, has expanded its extensive inventory of SCHOTT products with the addition of SCHOTT D263® T eco Windows, making it easier for customers […]

ACSYS bee honey filling event!

ACSYS bee honey filling event!

When do you have the opportunity to fill your own honey? It was something very special for us to fill 100 kg of honey into almost 300 glasses on Saturday, 2 October […]

Lenze exhibited its latest software, hardware digital solutions at SPS 2021

Lenze exhibited its latest software, hardware digital solutions at SPS 2021

New business models: resilient, resource-efficient manufacturing: and less downtime thanks to the transparency of relevant data – these challenges facing mechanical engineers and their customers are increasing. At SPS 2021 in Nuremberg, […]

DESMI launches it’s new High Flow Low Pressure pumps for the aquaculture industry

DESMI launches it’s new High Flow Low Pressure pumps for the aquaculture industry

DESMI’s new High Flow Low Pressure pumps fill a key need in aquaculture, boosting the company’s portfolio of highly efficient and extremely reliable pumps for fish farming. While DESMI now can offer […]

FANUC introduces its new LR-10iA/10 lightweight and compact fully covered robot

FANUC introduces its new LR-10iA/10 lightweight and compact fully covered robot

FANUC has developed a new fully covered robot, the LR-10iA/10, which is not only lightweight and compact, but offers a wide working range and high resistance to dust and water. The combination […]

Ehrhardt Partner Group promotes start-ups in the pioneering logistics sector

Ehrhardt Partner Group promotes start-ups in the pioneering logistics sector

As one of the world’s leading logistics experts, Ehrhardt Partner Group (EPG) is always looking to the future. And this outlook sees the Boppard-based family business treading new paths. With its newly […]

HÖRMANN Logistik closes a successful year and takes off innovatively

HÖRMANN Logistik closes a successful year and takes off innovatively

With a record order intake and new, innovative partnerships, HÖRMANN Logistik is well prepared for 2022. Since 1987, HÖRMANN Logistik has been designing and implementing automatic high-bay warehouses, small parts warehouses and […]

HYSTER: 3 PAPER HANDLING TRENDS THAT NEED AN ATTACHMENT SOLUTION

HYSTER: 3 PAPER HANDLING TRENDS THAT NEED AN ATTACHMENT SOLUTION

When handling valuable paper loads with Hyster® lift trucks, the right choice of attachment can be key.  Here are 3 trends affecting materials handling operations that may be addressed with attachments. A need for […]

Hexagon’s new metrology system features compact tactile measurement and tool-setting capabilities

Hexagon’s new metrology system features compact tactile measurement and tool-setting capabilities

New in-machine measurement technologies released by Hexagon’s Manufacturing Intelligence division significantly increase the variety of probing and tool-setting options for manufacturers looking for efficiency gains in a variety of production environments. Hexagon’s […]

AMSYS presents its new AMS 6916 pressure sensor

AMSYS presents its new AMS 6916 pressure sensor

Here it comes: after the digital AMS 6915 comes the new pressure sensor AMS 6916 with analog output for all pressure types and different pressure ranges from 0 … 5 mbar to […]

ams OSRAM introduces its new TSL2585 ambient light sensor with UV-A radiation detection support

ams OSRAM introduces its new TSL2585 ambient light sensor with UV-A radiation detection support

ams OSRAM, a global leader in optical solutions, presents an ambient light sensor with proprietary UV-A light detection. Monitoring vital signs such as pulse or oxygen saturation in the blood via smartphones […]

Teledyne FLIR’s new continuous zoom (CZ) lenses offers customizable solution for any camera and application

Teledyne FLIR’s new continuous zoom (CZ) lenses offers customizable solution for any camera and application

Teledyne FLIR, part of Teledyne Technologies Incorporated, introduced six commercially available continuous zoom (CZ) lenses for use with MWIR and LWIR sensors. These optics maximize the performance of the infrared camera by […]

Allied Vision expands its Alvium Camera Series with the new Alvium 1800 C-2040 and 1800 C-1620 models

Allied Vision expands its Alvium Camera Series with the new Alvium 1800 C-2040 and 1800 C-1620 models

Now available in Allied Vision’s Alvium CSI-2 camera series: 4th generation Sony IMX541 and IMX542 Pregius S sensors and NIR enhanced OnSemi AR0522 sensor With the Alvium 1800 C-2040 and Alvium 1800 […]

e-con Systems™ introduces its new e-CAM180_CUMI1820_MOD 18 MP MIPI camera solution

e-con Systems™ introduces its new e-CAM180_CUMI1820_MOD 18 MP MIPI camera solution

e-con Systems™ launches e-CAM180_CUMI1820_MOD, an 18 MP MIPI camera solution for the NVIDIA Jetson Xavier™ NX platform. e-CAM180_CUMI1820_MOD is based on the 1/2.3-inch AR1820 sensor from ON Semiconductor. This camera module provides […]

STUDER launches new roboLoad loading system designed for CNC radius internal cylindrical grinding machines

STUDER launches new roboLoad loading system designed for CNC radius internal cylindrical grinding machines

With the roboLoad, STUDER presents a new type of loading system for CNC radius internal cylindrical grinding machines. Loading systems for CNC radius internal cylindrical grinding machines – that was not so […]

Changes in HELLER Management

Changes in HELLER Management

On 31 December 2021, HELLER will bid farewell to Klaus Winkler, CEO of Heller Management SE. It is planned that he will join the supervisory boards of Heller Management SE and Heller […]

Tool measurement Danfoss uses the KELCH KENOVA set line H3

Tool measurement Danfoss uses the KELCH KENOVA set line H3

Following comprehensive advice by the system manufacturer KELCH GmbH, Danfoss Power Solutions II GmbH opted for a KELCH KENOVA set line H3: a horizontal tool presetter for tool measurement with innovative swivel table, which […]

Lödige: MIXTURE OF BOUILLON MASS AS A TECHNICAL PROCESSING TASK

Lödige: MIXTURE OF BOUILLON MASS AS A TECHNICAL PROCESSING TASK

Instant soups and bouillon cubes are a convenient and fast snack, but the production demands complex process technology requirements. Not only are the ingredients numerous but also extremely different in terms of […]

BHS: FOUR VERTICAL MIXERS ON THEIR WAY TO ASIA

BHS: FOUR VERTICAL MIXERS ON THEIR WAY TO ASIA

BHS-Sonthofen supplies four large mixers for the production of cellulose derivatives to an international customer in Asia. The continuously operating vertical mixers feature an intelligent control solution. Thanks to the BHS helical […]

THE NEW HENNECKE MIXHEAD AND INJECTOR PORTFOLIO

THE NEW HENNECKE MIXHEAD AND INJECTOR PORTFOLIO

A total of three new mixhead series and a more optimized line-up in injector technology provide Hennecke’s customers with optimal solutions for every application. At this year’s FAKUMA, the polyurethane specialist from […]

FAULHABER releases its new MC3001 motion controllers available in two variants

FAULHABER releases its new MC3001 motion controllers available in two variants

With the new MC3001 motion controllers, available as MC 3001 B (board-to-board connectors) or MC3001P (28-pin plug connector), FAULHABER completes the MC V3.0 generation of controllers for smaller motor series. The controllers […]

Haydon Kerk Pittman now offers its size 8 21mm hybrid stepper motor with an integrated connector

Haydon Kerk Pittman now offers its size 8 21mm hybrid stepper motor with an integrated connector

As a world leader in compact linear motion systems, Haydon Kerk Pittman, a business unit of AMETEK’s Advanced Motion Solutions Division, announces its size 8 21mm hybrid stepper motor is now available […]

Baumüller’s DS2 three-phase current synchronous motors now available with four cooling options

Baumüller’s DS2 three-phase current synchronous motors now available with four cooling options

Baumüller, the Nuremberg-based drive and automation specialist, offers its DS2 three-phase current synchronous motors with four different cooling options. In addition to the radial air-cooled, axial air-cooled and water-cooled options, the variant […]

Enerpac’s new HMT series modular torque wrenches offers cost-effective solution for bolting applications

Enerpac’s new HMT series modular torque wrenches offers cost-effective solution for bolting applications

Interchangeable, modular, and a low cost of ownership Upgrading hydraulic torque wrench tools does not have to be a major investment. The new Enerpac HMT series modular torque wrenches make it possible […]

STAUFF expands its production capacities for tube connectors with newly commissioned rotary transfer machine

STAUFF expands its production capacities for tube connectors with newly commissioned rotary transfer machine

In response to the growing demand of both the domestic and international markets for metric tube connectors of the STAUFF Connect series, STAUFF has already commissioned another state-of-the-art rotary transfer machine at […]

HAWE Hydraulik’s new compact power pack type INKA designed with future in mind

HAWE Hydraulik’s new compact power pack type INKA designed with future in mind

One thing quickly became clear: if HAWE were to develop a completely new hydraulic power unit, it would not only have to surpass the characteristic values of the currently available units, but […]

VOGELSANG LAUNCHES SEPARATOR FOR PROCESSING OF DIGESTATE AND LIQUID MANURE

VOGELSANG LAUNCHES SEPARATOR FOR PROCESSING OF DIGESTATE AND LIQUID MANURE

The biogas specialist audience will see the XSplit for the first time at the BIOGAS Trade Fair (December 7th-9th, 2021) in Nuremberg. Vogelsang already demonstrated the XSplit to the agricultural specialist audience during […]

Biogas Specialist WELTEC BIOPOWER Takes Over Operations of AD AGRO

Biogas Specialist WELTEC BIOPOWER Takes Over Operations of AD AGRO

With immediate effect, the operations of the biogas plant manufacturer AD AGRO have continued under the umbrella of the WELTEC Group in Germany. “Through the merger of the business fields of AD […]

BALANCE EnviTec Bio-LNG GmbH founded for the future sector of advanced fuels

BALANCE EnviTec Bio-LNG GmbH founded for the future sector of advanced fuels

Two biogas plant operators are pulling together: With a joint venture notarized yesterday, Leipzig-based BALANCE Erneuerbare Energien GmbH – a wholly owned subsidiary of VNG AG – and Lower Saxony-based biogas all-rounder […]

Opening: Automation specialist Unitechnik concludes major order – central spare parts warehouse for CLAAS

Opening: Automation specialist Unitechnik concludes major order – central spare parts warehouse for CLAAS

The agricultural machinery manufacturer CLAAS recently officially opened the automatic high-bay warehouse realised by Unitechnik Systems GmbH in Hamm-Uentrop, Westphalia. After two years of planning and construction, the project with an investment […]

TVH becomes Schwarzmüller Inverter Worldwide Service Center

TVH becomes Schwarzmüller Inverter Worldwide Service Center

TVH, the worldwide leader in replacement parts and accessories for material handling, industrial and agricultural equipment, has been appointed as the authorized worldwide service center by Schwarzmüller Inverter (‘SMI’), a German high […]

FANUC robots helps to future-proof production for UK broccoli growers

FANUC robots helps to future-proof production for UK broccoli growers

FANUC robots have been integrated into a ‘breakthrough’ selective automated broccoli harvesting system, which has the potential to revolutionise the UK vegetable industry in the face of spiralling production costs. Over 75,000 […]

Brune: AXIO und UNIGAMMA gewinnen Iconic Award

Brune: AXIO und UNIGAMMA gewinnen Iconic Award

Two products from our collection convinced at the ICONIC AWARDS 2022: Innovative Interior. AXIO (Design Kressel + Schelle) and UNIGAMMA (Design Uwe Sommerlade) were each awarded the “Winner” in the Furniture category. […]

König + Neurath puts autonomous high-bay warehouse into operation

König + Neurath puts autonomous high-bay warehouse into operation

The construction of the new camp was one of the last projects initiated by Egon König. Initiated by Egon König and which his wife Gerti König pushed forward with great after his […]

igus: Innovative cleaning machine makes coffee kitchens more sustainable

igus: Innovative cleaning machine makes coffee kitchens more sustainable

Offices know the problem: dirty coffee cups pile up in the sink. But the employees don’t feel like rinsing and eventually reach for the disposable cup instead. To avoid this environmental burden, […]